Aalberts Integrated Piping Systems Ltd. Approvals


#2010800

‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2010800
Size:
See model
Marking:
BSI Kitemark, size and Pegler logo (brand of Aalberts) on body
Installation Requirements:
R001
Expiry date:
31/10/2025
Model:
YP1 - Straight Coupling: copper x copper - 6mm - 67mm YP1 IM - Slip Adaptor Coupling: imperial copper x metric copper - ½" x 15mm - 1½" x 42mm YP1R - Reducing Straight Coupling: copper x copper 8mm x 6mm - 54mm x 42mm YP1 Slip - Slip Straight Coupling: copper x copper - 15mm, 22mm, 28mm YP2 - Straight Female Connector: copper x BSP: [Parallel Female Thread] 8mm x ¼" - 54mm x 2" YP2LC - Female reducing connector: [reduced BSP female end] - 15mm x ¼", 15mm x ⅜", 22mm x ½" YP2LI - Female reducing connector: [reduced copper end] - ¾" x 15mm YP3 - Straight male connector: [copper x BSP taper male thread] - 8mm x ¼" - 67mm x 2½" YP3LC - Male reducing connector: [reduced BSP male end] - 15mm x ¼" - 28mm x ¾" YP3LI - Male reducing connector: [reduced copper end] - 3/4" x 15mm, 1" x 22mm YP5 - Tank connector: copper x BSP [parallel male thread] - 15mm x ½" - 54mm x 2" YP5FC - Tank connector: copper x BSP [parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP6 - Reducer: [Larger end for insertion into fitting] - 8mm x 6mm - 67mm x 54mm YP7 - Female adaptor:[male copper for insertion into fitting x BSP parallel female thread] 15mm x ½" - 54mm x 2" YP8 - Male adaptor: [male copper for insertion into fitting x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP9 - Adaptor: [imperial female copper x metric male copper] - ½" x 15mm - 2" x 54mm YP9B - Non-standard adaptor - ½" 17G x 15mm YP99 - Adaptor: [Metric or imperial female copper x male copper] - 15mm x ½" - 42mm x 1½" YP11 - Union Coupling: [copper x copper] - 15mm - 67mm YP12 - Elbow: [copper x copper] - 6mm - 67mm YP12R - Reducing Elbow: [copper x copper] - 22mm x 15mm, 28mm x 22mm YP12S - Street Elbow: [Female copper x Male copper] - 8mm - 42mm YP13 - Male Elbow: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP14 - Female Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP14LC - Reducing Female Elbow: [Reduced female end] - 22mm x ½" YP15 - Backplate Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾" YP15LN - Backplate Elbow: [Extended nose and circular backplate] - 15mm x ½" YP18 - Slow Bend: [copper x copper] - 15mm, 22mm, 28mm YP20 - Return Bend: [copper x copper] - 15mm, 22mm, 28mm YP21 - Obtuse Elbow: [copper x copper] - 15mm - 67mm YP22 - Partial Crossover: [female copper x male copper] - 15mm, 22mm YP23 - Full Crossover: [copper x copper] - 15mm, 22mm YP24 - Equal Tee: [All ends for copper] - 6mm - 67mm YP24 Slip - Equal Tee, Slip pattern: [All ends for copper] - 15mm YP25 - Tee, Reduced Branch: [All ends for copper] - 22mm x 22mm x 10mm - 67mm x 67mm x 28mm YP26 - Tee, One End Reduced: [All ends for copper] - 22mm x 15mm x 22mm - 54mm x 42mm x 54mm YP27 - Tee, One End and Branch Reduced: [All ends for copper] - 22mm x 15mm x 15mm - 54mm x 42mm x 42mm YP28 - Tee, Both Ends Reduced: [All ends for copper] - 15mm x 15mm x 22mm - 35mm x 35mm x 42mm YP29 - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 15 x ½" x 15mm, 22 x ¾" x 22mm YP29R - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 22mm x ½" x 22mm, 28mm x ½" x 28mm, 35mm x ½" x 35mm YP30 - Female Tee: [Copper ends x BSP parallel female branch] - 15mm x 15mm x ½", 22mm x 22mm x ¾", 28mm x 28mm x 1" YP30BP - Backplate Tee: [Copper ends x BSP parallel female branch. Circular backplate] - 15mm x 15mm x ½" YP30R - Female Tee: [Copper ends x reduced BSP parallel female branch] 15mm x 15mm x ¼" - 42mm x 42mm x 1/2" YP37 - Sweep Tee, 90°: [All ends for copper] - 15mm, 22mm, 28mm YP37R - Sweep Tee, 90°: [Reduced branch] - 22mm x 22mm x 15mm, 28mm x 28mm x 15mm YP50 - Cross: [All ends for copper] - 15mm, 22mm YP61 - Stop End: [For use on copper tube] - 8mm - 54mm YP35 - Air Vent Tee: [YP37 Sweep Tee plus Air-Release Valve RV35] - 15mm RV35 - Air-Release Valve: [Male copper end suitable for use in any capillary socket] - 15mm YP62 - Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63 - Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63L - Long Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" YP64 - Bent union adaptor: [copper x BSP union nut] - 22mm x 1", 28mm x 1¼" YP65 - Bent male union connector: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP65R - Bent Boiler union: [copper x BSP taper male thread] - 22mm x 1" YP68 - Union adaptor: [copper x BSP union nut] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CL - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CLDZR - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] with DZR nuts - 15mm x ¾" YP68FF - Flat Faced Union adaptor: [copper x BSP union nut] Suitable for use with water meters. - 15mm x ¾", 22mm x 1" YP68M - Meter union connector: [copper x BSP union nut] Suitable for use with water meters. - 22mm x ¾" YP69 - Straight male union connector: [copper x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP69DP - Straight male union connector: with 104mm dip pipe. - 22mm x ¾" YP69F - Straight female union connector: [copper x BSP parallel female thread] - 15mm x ½" - 54mm x 2" YP69P - Straight male union connector: [copper x BSP parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1", 67mm x 2½" YP70 - Male nipple: [union thread x BSP taper male thread] - ½" x ⅜", ¾" x ½", 1" x ¾", 1¼" x 1" YP70P - Male nipple: [union thread x BSP taper male thread] For use with YP64 and YP68 - ¾" x ½", 1" x ¾" YP71 - Male nipple: [union thread x BSP taper male thread] equal ends. - ½" , ¾", 1" YP72 - Female nipple: [union thread x BSP parallel female thread] - ¾" x ½" - 2½" x 2" YP115 - Extension nipple: [Used to give extra length to female ends on YP14, YP15, YP30] - ½" - ¾"

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2102800

Range of gate valves with DZR brass bodies and brass wedge. Valves are operated via a non-rising spindle headwork. Maximum operating pressure 20.0 Bar. Maximum operating temperature 100°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2102800
Size:
See model
Marking:
Pegler England (brand of Aalberts) , size, PN & BR on body.
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
½” – 4” 1068 BS 5154 PN20 full way gate valve with handwheel. 203007, 203008, 203009, 203010, 203011, 203013, 203014 & 203015 ½” – 2” 1068LS BS 5154 PN20 full way gate valve with lockshield. 203067, 203068, 203069, 203070, 203071, 203072

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company
Manufacturer:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2007078

Range of latching and non-latching normally closed solenoid valves with either brass or stainless-steel bodies. Please refer to model for maximum working pressure. Maximum operating temperature 85°C.

Section:
2230 Valves
Section Subtitle:
Solenoid, metal.
WRAS Approval Number:
2007078
Size:
See model
Marking:
PEGLER (brand of Aalberts) & PRODUCT INFORMATION ON BODY
Installation Requirements:
R001
Expiry date:
31/07/2025
Model:
12900, 12901, 12902, 12903, 12904, 12905, 12906, 12907, 12908, 12910, 12911, 12912, 12913, 12914, 12915, 12916 & 12917 SOLENOID VALVES Maximum working pressure 16.0 bar: 1/2’’ BSP (F) (12900, 12901, 12902) Maximum working pressure 12.0 bar: 3/4’’ BSP (F) (12903, 12904, 12905) 1’’ BSP (F) (12906, 12907, 12908) Maximum working pressure 10.0 bar: 1 1/4’’ BSP (F) (12909, 12910, 12911) 1 1/2’’ BSP (F) (12912, 12913, 12914) 2’’ BSP (F) (12915, 12916, 12917)

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2101801

Range of gate valves (gunmetal) with gunmetal bronze wedges, brass spindle and PTFE seals. Maximum working pressure 20.0 bar. Maximum operating temperature 100°C.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2101801
Size:
1070/125 Taper Thread (½” female BSP inlet/outlet - 4” female BSP inlet/outlet) 1070/125PT Parallel Tread (½” female BSP inlet/outlet - 4” female BSP inlet/outlet) 1070/125 lockshield (½” female BSP inlet/outlet - 2” female BSP inlet/outlet).
Marking:
Pegler England (brand of Aalberts) on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
1070/125 Product Codes = 103007, 103008,103009,103010, 103011, 103012, 103013, 103014, 103015. 1070/125PT Product Codes = 103047, 103048, 103049, 103050, 103051, 103052, 103053, 103054, 103055. 1070/125 Lockshield Product Codes = 103057, 103058, 103059, 103060, 103061, 103062.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2006367

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1115 Fittings for use with Tube and Pipe
Section Subtitle:
Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006367
Size:
8mm – 54mm 3/8” – 2”
Marking:
YP (trademark of Pegler/ brand of Aalberts) on fitting body
Installation Requirements:
R001
Expiry date:
30/06/2025
Model:
YPS12 15 Elbow YPS12 22 Elbow YPS1 15 Coupling YPS1 22 Coupling YPS24 15 Tee YPS6 22X15 Reducer YPS24 22 Tee YPS25 22X22X15 Tee Red Branch YPS12S 15 Street Elbow YP12 28 Elbow YP26 22X15X22 Tee Red End YP6 15X10 Reducer YP6 28X22 Reducer YP1 28 Coupling YP12S 22 Street Elbow YP12 10 Elbow YP27 22X15X15 Tee Red End/Bran YP1 10 Coupling YP1 8 Coupling YP1R 22X15 Red Coupling YP21 15 Obtuse Elbow YP24 28 Equal Tee YP12 8 Elbow YP1IM SLIP 3/4X22 Adaptor YP21 22 Obtuse Elbow YP6 15X8 Reducer YP21 28 Obtuse Elbow YP6 28X15 Reducer YP25 28X28X22 Tee Red Branch YP25 28X28X15 Tee Red Branch YP24 10 Equal Tee Brass YP1R 28X22 Red Coupling YP28 15X15X22 Tee Red Ends YP68 22X1 St Union Adaptor YP24 8 Equal Tee Brass YP27 28X22X22 Tee Red End/Branch YP26 28X22X28 Tee Red End YP64 22X1 Bent Union Adaptor YP1IM SLIP 1X28 Adaptor YP12S 28 Street Elbow YP1IM SLIP 1/2X15 Adaptor YP61 15 Stop End YPS62 15X1/2 St Tap Connector YP61 22 Stop End YP12 35 Elbow YP63 15X1/2 Bent Tap Connector YP1 35 Coupling YP6 35X28 Reducer YP62 22X3/4 St Tap Connector YP62 15X3/4 St Tap Connector YP12 54 Elbow YP12 42 Elbow YP26 28X15X28 Tee Red End YP6 35X22 Reducer YP21 35 Obtuse Elbow YP61 10 Stop End YP1SLIP 22 Slip Coupling YP6 35X15 Reducer YP1 42 Coupling YP6 10X8 Reducer YP24 35 Equal Tee YP1SLIP 15 Slip Coupling YP1 54 Coupling YP24 42 Equal Tee YP25 35X35X15 Tee Red Branch YP21 42 Obtuse Elbow YP24 54 Equal Tee YP61 8 Stop End YP25 35X35X22 Tee Red Branch YP1R 15X10 Red Coupling YP6 42X35 Reducer YP6 42X28 Reducer YP21 54 Obtuse Elbow YP6 54X42 Reducer YP25 42X42X15 Tee Red Branch YP25 54X54X22 Tee Red Branch YP1R 15X8 Red Coupling YP25 42X42X28 Tee Red Branch YP6 54X28 Reducer YP25 35X35X28 Tee Red Branch YP25 54X54X15 Tee Red Branch YP6 42X15 Reducer YP25 42X42X22 Tee Red Branch YP6 42X22 Reducer YP6 54X35 Reducer YP6 54X15 Reducer YP6 54X22 Reducer YP25 54X54X28 Tee Red Branch YP25 54X54X42 Tee Red Branch YP27 28X22X15 Tee Red End/Branch YP25 42X42X35 Tee Red Branch YP1R 10X8 Red Coupling YP25 54X54X35 Tee Red Branch YP28 15X15X28 Tee Red Ends YP28 22X22X28 Tee Red Ends YP27 28X15X15 Tee Red End/Branch YP27 28X15X22 Tee Red End/Branch YP1SLIP 28 Slip Coupling All fittings are for use with copper pipe to EN 1057.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2006368

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2006368
Size:
6mm – 54mm.
Marking:
Endex on fitting body
Installation Requirements:
R001
Expiry date:
30/06/2025
Model:
NS12 / 5090 15 Elbow NS12 / 5090 22 Elbow NS1 / 5270 22 Coupling NS1 / 5270 15 Coupling NS24 / 5130 15 Equal Tee NS12S / 5092 15 Street Elbow NS6 / 5243 22x15 Reducer N12 / 5090 28 Elbow NS24 / 5130 22 Equal Tee N12S / 5092 22 Street Elbow N1 / 5270 28 Coupling N6 / 5243 28x22 Reducer N21 / 5041 15 Bend 45 N12 / 5090 10 Elbow N1R / 5240 15x10 Red Coupling N21 / 5041 22 Bend 45 N24 / 5130 28 Equal Tee N21 / 5041 28 Bend 45 N1 / 5270 10 Coupling N1 SLIP / 5270S 15 Slip Coupling N63 15x1/2 Bent Tap Connector N6 / 5243 15x8 Reducer N12S / 5092 28 Street Elbow N6 / 5243 28x15 Reducer N12 / 5090 8 Elbow N1 / 5270 8 Coupling N1 SLIP / 5270S 22 Slip Coupling N6 / 5243 10x8 Reducer N24 / 5130 10 Equal Tee NS25 22x22x15 / 5130 22x15x22 T N1 SLIP / 5270S 28 Slip Coupling N63 22x3/4 Bent Tap Connector N24 / 5130 8 Equal Tee N26 22x15x22 / 5130 22x22x15 T NS62 / 5240G 15x1/2 TapConnector N25 28x28x15 / 5130 28x15x28 T N27 22x15x15 / 5130 22x15x15 T N61 / 5301 15 Stop End N61 / 5301 22 Stop End N12 / 5090 35 Elbow N21S / 5040 28 St Bend 45 N27 28x22x22 / 5130 28x22x22 T N6 / 5243 35x28 Reducer N1IM / 5241 3/4x22 Adpt Coup N21S / 5040 22 St Bend 45 N62 / 5240G 15x3/4 Tap Connector N21S / 5040 15 St Bend 45 N26 28x15x28 / 5130 28x28x15 T N22 / 5086 15 Part crossover N25 28x28x22 / 5130 28x22x28 T MEF1 35 Coupling MEF21 35 Obtuse Elbow N1R / 5240 28x22 Red Coupling MEF12 42 Elbow N28 15x15x22 / 5130 15x22x15 T N62 / 5240G 22x3/4 Tap Connector N26 28x22x28 / 5130 28x28x22 T N1R / 5240 22x15 Red Coupling N1IM / 5241 1/2x15 Adpt Coup MEF6 42x28 Reducer MEF6 42x35 Reducer MEF25 35x35x15 Tee Red Branch MEF6 35x22 Reducer N23 / 5085 15 Full crossover MEF6 54x42 Reducer N61 / 5301 28 Stop End MEF25 35x35x22 Tee Red Branch N22 / 5086 22 Part crossover MEF6 42x22 Reducer MEF21 42 Obtuse Elbow MEF1 42 Coupling MEF25 35x35x28 Tee Red Branch MEF6 54x28 Reducer MEF12S 35 Street Elbow MEF24 54 Equal Tee N23 / 5085 22 Full crossover MEF25 42x42x15 Tee Red Branch N1IM / 5270 1x28 Adpt Coup MEF6 35x15 Reducer MEF24 35 Equal Tee MEF21S 35 Obtuse Street Elbow MEF25 54x54x22 Tee Red Branch MEF25 42x42x22 Tee Red Branch MEF24 42 Equal Tee MEF12 54 Elbow MEF12S 54 Street Elbow N27 28x22x15 / 5130 28x15x22 T MEF25 54x54x28 Tee Red Branch MEF25 42x42x28 Tee Red Branch MEF25 42x42x35 Tee Red Branch MEF6 54x22 Reducer MEF25 54x54x42 Tee Red Branch MEF25 54x54x35 Tee Red Branch MEF6 54x15 Reducer MEF61 42 Stop End MEF26 35x22x35 Tee Red End MEF6 54x35 Reducer MEF12S 42 Street Elbow MEF25 54x54x15 Tee Red Branch MEF27 35x28x15 Tee Red End/Branch MEF12S 10 Street Elbow MEF61 8 Stop End MEF27 35x28x28 Tee Red End/Branch MEF21 54 Obtuse Elbow MEF27 42x35x35 Tee Red End/Branch MEF1 54 Coupling MEF21S 42 Obtuse Street Elbow N27 28x15x22 / 5130 28x22x15 T MEF27 54x42x42 Tee Red End/Branch N27 28x15x15 / 5130 28x15x15 T MEF61 10 Stop End MEF1R 28x15 Red Coupling MEF26 35x28x35 Tee Red End MEF61 35 Stop End MEF61 54 Stop End MEF25 15x15x10 Tee Red Branch MEF6 42x15 Reducer MEF63 15x3/4 Bent Tap Connector MEF1R 10x8 Red Coupling MEF1R 15x10 Red Coupling N12 / 5090 12 Elbow N18S / 5001A 12 St Bend N18S / 5001A 15 St Bend N18S / 5001A 16 St Bend N18S / 5001A 18 St Bend N18S / 5001A 22 St Bend N18S / 5001A 28 St Bend N18 / 5002A 12 Bend 90 N18 / 5002A 15 Bend 90 N18 / 5002A 18 Bend 90 N18 / 5002A 22 Bend 90 N18 / 5002A 28 Bend 90 N21S / 5040 12 St Bend 45 N21S / 5040 16 St Bend 45 N21S / 5040 18 St Bend 45 N21 / 5041 12 Bend 45 N21 / 5041 18 Bend 45 N23 / 5085 18 Full crossover N22 / 5086 18 Part crossover N12 / 5090 18 Elbow N12S / 5092 12 Street Elbow N12S / 5092 18 Street Elbow N24 / 5130 12 Equal Tee N24 / 5130 18 Equal Tee N28 12x12x15 / 5130 12x15x12 T N27 15x12x12 / 5130 15x12x12 T N28 15x15x18 / 5130 15x18x15 T N27 18x12x12 / 5130 18x12x12 T N27 18x15x12 / 5130 18x12x15 T N25 18x18x12 / 5130 18x12x18 T N27 18x15x15 / 5130 18x15x15 T N25 18x18x15 / 5130 18x15x18 T N26 18x15x18 / 5130 18x18x15 T N28 18x18x22 / 5130 18x22x18 T N25 22x22x12 / 5130 22x12x22 T N27 22x18x15 / 5130 22x15x18 T N27 22x18x18 / 5130 22x18x18 T N25 22x22x18 / 5130 22x18x22 T N26 22x18x22 / 5130 22x22x18 T N28 22x22x28 / 5130 22x28x22 T N27 28x22x18 / 5130 28x18x22 T N25 28x28x18 / 5130 28x18x28 T N1R / 5240 15x12 Red Coupling N1R / 5240 16x12 Red Coupling N1R / 5240 18x15 Red Coupling N1R / 5240 18x16 Red Coupling N1R / 5240 22x16 Red Coupling N1R / 5240 22x18 Red Coupling 5240 64x54 Red Coupling N6 / 5243 15x12 Reducer N6 / 5243 16x12 Reducer N6 / 5243 18x15 Reducer N6 / 5243 22x16 Reducer N6 / 5243 22x18 Reducer N6 / 5243 28x18 Reducer N1 / 5270 12 Coupling N1 / 5270 18 Coupling N1 SLIP / 5270S 12 Slip Coupling N1 SLIP / 5270S 18 Slip Coupling N61 / 5301 18 Stop End

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2011341

Range of brass and copper fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 18.6 bar. Maximum operating temperature 100°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2011341
Size:
See model
Marking:
Endex Logo or Endbraze on body.
Installation Requirements:
R001
Expiry date:
30/11/2025
Model:
N1 Straight Coupling: 88030 - 67mm 89600 - 76mm 89601 - 108mm 89697 - 133mm 89698 - 159mm B12 Elbow: 88456 – 67mm 89619 – 76mm N61 Stop End: 89090 – 67mm 89694 – 76mm 89695 – 108mm N69P Straight Male Union Connector: 89253 – 67mm N1IM Met x Imp Adaptor Coupling: 89617 – 76mm x 3” 89618 – 108mm x 4” N18 Slow Bend: 89639 – 67mm 89640 – 76mm 89741 – 108mm 89709 – 133mm 89710 – 159mm N1FMGI Bi-Metal Flange: 88028 – 42mm (4 holes) 88029 – 54mm (4 holes) 88114 – 67mm (4 holes) 89603 – 76mm (8 holes) 89604 – 108mm (8 holes) 89602 – 133mm (8 holes) 89719 – 159mm (8 holes) N3 Straight Male Connector: 88200 – 67mm x 2 ½” 89615 – 76mm x 3” 89616 – 108mm x 4” N21 Obtuse Elbow: 88653 – 67mm 89645 – 76mm 89646 – 108mm 89711 – 133mm 89712 – 159mm N1FMB Gunmetal Flange: 89605 – 76mm (8 holes) N6 Reducer: 88310 – 67mm x 28mm 88311 – 67mm x 35mm 88312 – 67mm x 42mm 88313 – 67mm x 54mm 89624 – 76mm x 35mm 89625 – 76mm x 42mm 89626 – 76mm x 54mm 89627 – 76mm x 67mm 89630 – 108mm x 42mm 89631 – 108mm x 54mm 89632 – 108mm x 67mm 89633 – 108mm x 76mm 89699 – 133mm x 42mm 89700 – 133mm x 54mm 89701 – 133mm x 67mm 89702 – 133mm x 76mm 89703 – 133mm x 108mm 89704 – 159mm x 54mm 89705 – 159mm x 67mm 89706 – 159mm x 76mm 89707 – 159mm x 108mm 89708 – 159mm x 133mm N24 Equal Tee: 88719 – 67mm 89648 – 76mm 89649 – 108mm 89713 – 133mm 89714 – 159mm N25 Tee Reduced Branch: 88807 – 67mm x 67mm x 28mm 89055 – 67mm x 67mm x 35mm 89056 – 67mm x 67mm x 42mm 89057 – 67mm x 67mm x 54mm 89058 – 76mm x 76mm x 28mm 89000 – 76mm x 76mm x 35mm 89654 – 76mm x 76mm x 42mm 89001 – 76mm x 76mm x 54mm 89059 – 108mm x 108mm x 35mm 89660 – 108mm x 108mm x 54mm 89002 – 108mm x 108mm x 76mm 89715 – 133mm x 133mm x 54mm 89716 – 133mm x 133mm x 108mm 89717 – 159mm x 159mm x 54mm 89718 – 159mm x 159mm x133mm
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2101535

'Traditional Craftsman's Flux'. Brown coloured soldering flux. For use with water up to 85°C.

Section:
5090 Fluxes
Expiry date:
31/01/2026

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2104509

`Yorkshire Flux 130 (White)`. White coloured paste flux. For use with water up to 85°C.

Section:
5090 Fluxes
Expiry date:
30/04/2026

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2109001

Pressure gauge with a plastic case, brass connector and bronze spring tube. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
Size:
⅜” BSP (M)
Marking:
Pegler (Brand of Aalberts integrated piping systems Ltd.) on gauge face.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
Pegler Prestex pressure Gauge (5A2003)
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111027

Pressure gauge with brass body and a plastic case. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C

Section:
1530 Miscellaneous Fittings
Size:
¼” BSP (M)
Marking:
Pegler logo on gauge face.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
02680086 Pegler Prestex
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2112037

Range of ‘Resident Valves’ with a DZR brass body consisting of water meter manifold, an isolation valve on the inlet, a pressure reducing valve (adjustable between 1.5 and 6.0 bar) and 2 non-return valves which are located on the outlet of the water meter manifold. The ‘Plus’ models are also supplied with an isolation valve on the outlet, which incorporates a drain tap. Maximum supply pressure 16.0 Bar. Cold water above ground use only.

Section:
1510 Water Meter Manifolds
Size:
See model.
Marking:
Main body: Pegler (Pegler is a brand of Aalberts integrated piping systems Ltd.), Pegler logo, flow arrow, size, pressure and CR on body. Isolation valve: Pegler and Pegler logo, CR and PN on body.
Installation Requirements:
R001 R120 R511
Expiry date:
31/12/2026
Model:
Pegler RES1 Resident Valve 3/4x1 MF (5A3001): ¾” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES1 Resident Valve 1X1 MF (5A3002): 1” BSP (F) inlet x 1” BSP (M) outlet. Pegler RES2 Resident Valve Plus 3/4 FF (5A3021): ¾” BSP (F) inlet/outlet. Pegler RES2 Resident Valve Plus 1 FF (5A3022): 1” BSP (F) inlet/outlet.
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2205702

Range of spherical valves incorporating stainless steel strainers, chrome plated brass ball, housed within DZR brass bodies with a brushed chrome finish. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2205702
Size:
15mm compression
Marking:
Pegler (Brand of Aalberts), Pegler company logo, flow arrow, CR, size and PN on body.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
254250 PB370DR (Red Handle). 254252 PB370DR (Blue Handle).

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2106049

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106049
Size:
12mm - 108mm.
Marking:
DVGW, XPRESS & SIZE ON BODY
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111026

Range of gate valves with bronze bodies and PTFE seals. The valves incorporate a non-rising stem and hand-wheel or lock shield operating members (see models). Maximum working pressure 20.0 bar. Maximum operating temperature 100ºC.

Section:
2290 Valves
Section Subtitle:
Stop, gate, metal.
WRAS Approval Number:
2111026
Size:
Please refer to model.
Marking:
Pegler logo, size & PN on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
Product Code – Pattern Number (Size) Tapered without lock-shield: 101050 – 10751 (½” BSPT F) 101051 – 10751 (¾” BSPT F) 101502 – 10751 (1” BSPT F) 101053 – 10751 (1¼” BSPT F) 101054 – 10751 (1½” BSPT F) 101055 – 10751 (2” BSPT F) 101056 – 10751 (2½” BSPT F) 101057 – 10751 (3” BSPT F) Parallel without lock-shield: 101070 – 10751PT (½” BSPP F) 101071 – 10751PT (¾” BSPP F) 101072 – 10751PT (1” BSPP F) 101073 – 10751PT (1¼” BSPP F) 101074 – 10751PT (1½” BSPP F) 101075 – 10751PT (2” BSPP F) 101076 – 10751PT (2½” BSPP F) 101077 – 10751PT (3” BSPP F) Tapered with lock-shield: 101060 – 10751LS (½” BSPT F) 101061 – 10751LS (¾” BSPT F) 101062 – 10751LS (1” BSPT F) 101063 – 10751LS (1¼” BSPT F) 101064 – 10751LS (1½” BSPT F) 101065 – 10751LS (2” BSPT F) Parallel with lock-shield: 101078 – 10751PTLS (½” BSPP F) 101079 – 10751PTLS (¾” BSPP F) 101080 – 10751PTLS (1” BSPP F) 101081 – 10751PTLS (1¼” BSPP F) 101082 – 10751PTLS (1½” BSPP F) 101083 – 10751PTLS (2” BSPP F)
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2202701

‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2202701
Marking:
Endex (brand of Pegler Yorkshire Ltd.) and size on body
Installation Requirements:
R001
Expiry date:
28/02/2027
Model:
Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2201304

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2201304
Size:
see model
Marking:
Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2203009

Range of inline and angled screwdriver or lever handle operated spherical valves with (chromium plated) brass bodies, chromium plated brass ball, NBR ‘O’-rings. For use with copper pipe manufactured to EN 1057 Maximum working pressure 16.0 bar at 30°C and 5 bar at 99°C Maximum working pressure 6.0 bar. Maximum operating temperature 90°C (model TX480 only)

Section:
2260 Valves
Section Subtitle:
Spherical, metal.
WRAS Approval Number:
2203009
Size:
see model
Marking:
Model TX480- Tectite Pro & size on body Models 806 & 808 15mm - Flow arrow on body. Prestex, 1254-2, England, BSI Kitemark & size on nut. Model 808 22mm- Pegler logo, size & flow arrow on body. Prestex, 1254-2, England, BSI Kitemark & size on nut. 809- Flow arrow on operating member. Prestex, 1254-2, England, BSI Kitemark & size on nut. Models 809B & 809T - Pegler logo & flow arrow on body. Size & EN1254-2 on nut.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
TX480 - 15mm push fit inlet and outlet (product code 65960) 806 -15mm compression inlet x ½" captive nut (product code 521007) 808 - 15mm compression inlet and outlet (product code 523007) 808 - 22mm compression inlet and outlet (product code 523008) 809 - 15mm compression inlet x ¾" BSP (M) outlet (product code 524008) 809B - 15mm compression inlet x ¾" BSP (M) outlet (product code 524009) 809T - 15mm compression inlets x ¾" BSP (M) outlet (product code 524010)
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2201074

Range of lugged and wafer type butterfly valves with blue epoxy coated bodies, incorporating EPDM rubber ‘O’-rings and seat, and either a bronze (AB2), stainless steel (CF8 & CF8M) or blue epoxy coated ductile iron (DI) disc. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
2201074
Size:
DN50 to DN600 flanged
Marking:
Pegler (brand of Aalberts), WRAS, PN and range on data plate on body. PN and DN on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
V905/ V905G LUGGED SERIES & V906/ V906G WAFER SERIES BUTTERFLY VALVES: DN50 - 600
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111059

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:
1715 Strainers
Size:
DN50 up DN400 flanged inlet and outlet
Marking:
Pegler (brand of Aalberts) size and pressure on data plate on body. Size, pressure and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
V912 Ductile Iron Y Type Strainer DN50-300
Product Images

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 3

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.