Davroc Limited Approvals


#2009026

Combined bath filler and overflow with a brass body and metal trim (various finishes). The outlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a click type waste. Maximum operating temperature 85°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2009026
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Coalbrook (brand of Davroc) logo on the underside of the bath filler/overflow trim piece.
Installation Requirements:
R001 R576
Expiry date:
30/09/2025
Model:
XX5000YY XX represents the branding, which can be replaced with: CO = Coalbrook. YY denotes the finish, which can be replaced with: BN = Brushed Nickel. CP = Chrome. GN = Gunmetal. SB = Stable Brass.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2203024

Range of wall mounted bar type thermostatic shower mixers with brass bodies (various finishes), incorporating a ceramic disc headwork which controls and diverts the flow to a hand shower or overhead shower using a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member with a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Products are supplied with an overhead shower, shower hose and shower handset. Maximum working pressure: 5.0 Bar. Maximum operating temperature: 60ºC.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2203024
Size:
½” x ¾” BSP offset unions
Marking:
Coalbrook logo on bottom of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2027
Model:
Typical product code - XX 3000 YY XX denotes name of trim and can be replaced with: DO – Domo Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2203029

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2203029
Size:
PET braided TpSiv lined flexible hose assemblies incorporating ½” BSP captive nuts end connections.
Marking:
Coalbrook logo on base of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/03/2027
Model:
XX 6000 YY XX denotes the trim and can be replaced with: DO = Domo Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass BB = Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2201036

Range of wall mounted spout outlets (brass bodies, various finishes) incorporating a plastic aerator. Maximum operating temperature 60°C.

Section:
0682 Combination Tap Assemblies
Section Subtitle:
Spout outlet(s).
WRAS Approval Number:
2201036
Note:
Open outlet use only
Size:
¾” BSP (F)
Marking:
Coalbrook logo (brand of Davroc) on underside of spout.
Installation Requirements:
R001 R040
Expiry date:
31/01/2027
Model:
XX 2003 YY Understanding the product code: XX: Replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. Examples are: DO which represents the name 'Domo' and BA which represents 'Bank'. 2003: model range. YY: Replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BB - Brushed Brass, BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, SB - Stable Brass.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2211037

Shower kit consisting of shower handset, EPDM lined shower hose, wall outlet and riser rail, available in various finishes (see model). Maximum operating temperature 85.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2211037
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Coalbrook logo (brand of Davroc) on rear of Handset and Wall Outlet.
Installation Requirements:
R001 R040
Expiry date:
30/11/2027
Model:
XX4012YY. Where XX denotes the trim and can be replaced with: CO – Coalbrook. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel, CP = Chrome, GM = Gunmetal, SB = Stable Brass, BB = Brushed Brass.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2212030

Concealed ceiling outlet with a brass body.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2212030
Note:
Open outlet use only.
Size:
M28x1.25mm (internal thread) and ½” BSP (M) (external thread) inlet.
Marking:
Coalbrook (brand of Davroc Limited) on body.
Installation Requirements:
R001 R040
Expiry date:
31/12/2027
Model:
C04008
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2212031

Range of three-hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes). Incorporating quarter turn ceramic disc headworks incorporating single lever, dome, or cross top type operating members (see models) and supplied with stainless steel braided EPDM lined connection hoses. The spout outlet incorporates a plastic aerator. The spout and side valves are connected via stainless steel braided EPDM lined flexible hoses with EPDM washers and O-rings. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2212031
Size:
½” BSP (M)
Marking:
Coalbrook logo on spout
Installation Requirements:
R001 R006 R010
Expiry date:
31/12/2027
Model:
XX1015YY 3-hole deck mounted basin mixer with angled swivel spout XX1016YY 3-hole deck mounted basin mixer with round swivel spout XX denotes the trim style, and can eb replaced with the following: DO = Domo (Single Lever), DC = Decca (Dome Type), BA = Bank (Cross Top), Zu = Zurich (Single Lever). YY denotes the finish, and can be replaced with any of the following: CP = Chrome Plated, BN = Brushed Nickel, BB = Brushed Brass, GM = Gunmetal.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2212041

Wall mounted, three-hole, single outlet (fixed) combination tap assembly incorporating a brass body with quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator.. Maximum working pressure 5.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2212041
Size:
¾” BSP (F).
Marking:
CoalBrook logo (brand of Davroc) on base of spout.
Installation Requirements:
R001 R040 R010
Expiry date:
31/12/2027
Model:
XX2005YY. XX replaced with trim for example DO - Domo, DC - Decca, BA – bank, ZU - Zurich. YY = BN – Brushed nickel, CP – Chrome, GM – Gunmetal, SB – Stable Brass, BB – Brushed brass.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2301027

Wall mounted shower outlet, shower hose and handset. Available with various finishes. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301027
Size:
½” BSP male
Marking:
Coalbrook logo on shower outlet and handset
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
XX4011YY. First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is CO which represents the name ‘Coalbrook’. Middle numbers (e.g. 4011) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2301028

A deck mounted, three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with cross top operating members. The product is also supplied with stainless steel braided, EPDM lined flexible connecting hose assemblies, intended for use between side body valves and spout. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0660 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2301028
Size:
¾” BSP (M) (side valves) connected to the ½” BSP (M) inlet on the spout via a stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nuts
Marking:
CoalBrook logo rear of spout
Installation Requirements:
R001 R006 R010
Expiry date:
31/01/2028
Model:
XX 2006 YY Understanding the product code: Typical product code – XX2006YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is BA which represents the name ‘Bank’. Middle numbers (e.g. 2006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#240502063

2-way ceramic disc diverter incorporating a brass body. Maximum working pressure 5.0 bar Maximum operating temperature 85°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
240502063
Size:
¾” BSP (F).
Marking:
Coalbrook logo on collar of trim set. Flow arrow on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2029
Model:
XX 2007 YY Where: XX denotes the trim option and will be represented by two letters. As examples: DO - ‘Domo’, DC - ‘Decca’, BA - ‘Bank’. YY denotes finish (which is a non-water contact part) and will be represented by two letters. As examples: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, SB - Stable Brass, BB - Brushed Brass. The XX 2007 YY concealed body must always be installed with a trim set.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#240602045

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240602045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Grey polymeric (PET - Polyethylene terephthalate) braided, PEX lined flexible hose assemblies incorporating 1/2” BSP (F) captive nut end connections.
Marking:
Coalbrook logo on body
Installation Requirements:
R001 R006 R010 R009
Expiry date:
30/06/2029
Model:
XX 1000 YY, XX 1022 YY, XX 1023 YY, XX 1024 YY. ‘XX’ is replaced with letters denoting the name of the trim. Examples include: DO = ‘Domo’, DC = ‘Decca’ & ZU = ‘Zurich’. The numbers in the middle denotes the code allocated to the model and remains constant. ‘YY’ is replaced with letters denoting the colour/plating options. Examples include: BN = Brushed Nickel, CP = Chrome & GM = Gunmetal.
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company
Manufacturer:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#240908001

Range of adjustable ceiling and wall mounted shower arms available with brass bodies (various finishes). Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240908001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Coalbrook logo on the escutcheon.
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
xx 4015 yy adjustable ceiling arm, xx 4016 yy adjustable wall arm. xx denotes the name of the product: CO – Coalbrook. yy denotes the different colour finish: BN = Brushed Nickel CP = Chrome GM = Gumetal SB = Stable Brass BB = Brushed brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708001

Wall mounted shower set comprising of an inlet connection, shower handset (brass bodies, various finishes), shower holder and EPDM lined shower hose. Maximum operating temperature 85⁰C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250708001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Coalbrook logo on the shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
XX4001YY XX denotes the trim and can be replaced with: CO – Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#241002022

Single-hole, single outlet, (swivel) combination tap assembly (brass body – various finishes), incorporating quarter turn ceramic disc headworks various operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating emperature 65.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
241002022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
The ‘Coalbrook’ logo is etched on the lower rear of the basin mixer body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2029
Model:
XX 1002 YY Typical product code – XX1002YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. Examples are: DO which represents the name ‘Domo’ DC which represents the name ‘Decca’ BA which represents the name ‘Bank’. Middle numbers (e.g. 1002) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass
Product Images

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250101702

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side or bottom entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250101702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dudley & thomasdudley.co.uk moulded on inside of lid TD on cap Flush volume inside cistern.
Installation Requirements:
R001 R280 R556
Expiry date:
31/01/2030
Model:
Coalbrook Concealed Cistern.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250708002

Range of single hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
250708002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Grey PET braided, PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Manufactures logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2030
Model:
XX1001YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca ZU – Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708004

Range of wall mounted, three-hole, single outlet (fixed) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headworks with dome type or single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250708004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on body. (Brand of Davroc)
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2030
Model:
XX 1008 YY, XX 1011 YY, XX 1018 YY, XX 1021 YY. XX denotes the trim and can be replaced with: DO – Domo DC Decca ZU – Zurich BA - Bank Middle numbers (e.g. 1008) – This is the numeric code allocated to the model and remains constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass BB = Brushed Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708005

Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies, that incorporate brass bodies (various finishes) and ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250708005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male.
Marking:
Coalbrook logo on spout. (Brand of Davroc).
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2030
Model:
XX1007YY, XX1009YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca ZU – Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708006

Wall mounted shower kit incorporating a plastic shower handset (various finishes), shower hose, wall mounted elbow socket and riser rail. Open outlet use only. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250708006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male
Marking:
Coalbrook (Davroc brand) logo on body of handset and Shower Socket.
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
XX4002YY. XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN - Brushed Nickel CP - Chrome GM - Gunmetal BB - Brushed Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708007

Range of overhead shower outlets with brass bodies (various finishes), stainless steel strainers and NBR ‘O’-rings. Open outlet use only. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250708007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP captive nut.
Marking:
Coalbrook (Davroc brand) logo on upper face.
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
XX4003YY, XX4004YY. XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: CP - Chrome GM - Gunmetal BB - Brushed Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708008

Deck mounted, pull-out shower hose and handset. The inlet of the shower handset incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250708008
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel sheathed, EPDM lined flexible shower hose with a ½” BSP captive nut end connection.
Marking:
Coalbrook (Davroc brand) logo on body on the rear of the handset.
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
XX5003YY. XX denotes the trim and can be replaced with: CO - Coalbrook Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708009

Range of ceiling and wall mounted shower arms with brass bodies (various finishes). Open outlet use only. Maximum operating temperature 85°C.

Section:
1670 Shower Outlets
Section Subtitle:
Shower kit(s)
WRAS Approval Number:
250708009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” Male BSP.
Marking:
Coalbrook (Davroc brand) logo on the arm close to the threaded arm.
Installation Requirements:
R001 R040
Expiry date:
31/07/2030
Model:
XX4005YY - 275mm ceiling arm, XX4006YY - Wall arm, XX4007YY - 100mm ceiling arm. XX denotes the trim and can be replaced with but not limited to: CO – Coalbrook. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal SB = Stable Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708010

Range of three-hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members and metal backnuts. The spout outlets incorporate a plastic aerator. The headwork is connected to the spout via interconnecting stainless steel braided, EPDM lined flexible hoses. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0650 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250708010
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Manufacturers logo on the rear of spout.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2030
Model:
XX1005YY, XX1006YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca & ZU - Zurich Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708011

Range of deck mounted two-hole, metal, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating quarter turn ceramic cartridge headwork with single lever operating members. The outlets incorporate a plastic aerator, and the products are supplied with metal backnuts and interconnecting PET braided, PEX lined flexible hose assemblies to connect the headwork and spout. Maximum working pressure 5.0 bar. Maximum operating temperature 65ºC.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
250708011
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
PET braided, PEX lined flexible hose assemblies with ½” BSP captive nut end connections.
Marking:
Coalbrook logo on the rear of spout
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2030
Model:
XX1003YY, XX1004YY. XX denotes the trim and can be replaced with: DO – Domo DC – Decca, ZU- Zurich. Numbers – this is the numerical code allocated to the model and will remain constant. YY denotes the finish and can be replaced with: BN = Brushed Nickel CP = Chrome GM = Gunmetal BB = Brushed Brass

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250708012

Five-hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes), incorporating a quarter turn ceramic disc headworks to control the flow and a manual diverter to shower outlet both with single lever operating members. The spout outlet incorporates an aerator. The product is supplied with a pull out shower hose and shower handset, metal backnuts and stainless steel braided, EPDM lined interconnecting hoses. The handset also incorporates an approved single check valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0673 Combination Tap Assemblies
Section Subtitle:
Multi-hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
250708012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M).
Marking:
Coalbrook logo on hand set and on rear of hand set holster.
Installation Requirements:
R001 R006 R020
Expiry date:
31/07/2030
Model:
XX 2000 YY. XX denotes the trim, the number of letters will depend on the name of the trim. Examples are but not limited to: BA-Bank, DO-Domo, DC-Decca & ZU-Zurich. The numbers are a numerical and will remain constant. YY denotes the finish, examples are but not limited to BN-Brushed nickel, CP-Chrome, GM-Gunmetal & BB-Brushed brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250408013

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250408013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the upper face
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250608022

Range of thermostatic mixing valves in various finishes, model XX3001YY has one outlet, temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc valve, model XX3002YY has 2 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge and model XX3003YY has 3 outlets temperature is controlled independently by a thermostatic cartridge and the flow controlled via a ceramic disc cartridge. Inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60⁰C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250608022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
These products are not supplied with shower hoses or handsets.
Size:
¾” BSP (F).
Marking:
Coalbrook on shroud body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2030
Model:
XX 3001 YY, XX 3002 YY and XX 3003 YY: XX denotes the trim and can be replaced with BA – Bank, DO – Domo and DC Decca. The numbers will remain constant. YY denotes the finish BN – Brushed Nickel, CP - Chrome, GM – Gunmetal and BB – Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.