Geberit Sales Ltd. Approvals


#1903095

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve that is activated via an infrared sensor. The spout outlet incorporates an aerator comprising of a plastic housing and rubber aerator outlet. The mixer housing can be single feed (cold/mixed) ‘without mixer’ models or dual feed (hot and cold) ‘with mixer’ models. The mixer housing whether dual feed or single feed incorporates an approved single check valve cartridge on each inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The mixer housing also incorporates the solenoid valve, as well as plastic strainers and spherical valves on the inlets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Non-touch Methods of Control Products listed in this section utilise flow control methods that do not require touch to activate.
WRAS Approval Number:
1903095
Expiry date:
31/03/2024
Note:
R010 applies to the ‘with mixer’ models.
Size:
½” BSP (M).
Marking:
Geberit on spout wall plate. Geberit on control box body.
Installation Requirements:
R001 R007 R010 R040
Model:
BATTERY OPERATED WITH MIXER: 116.264.21.1 PIAVE 17CM, 116.284.21.1 PIAVE 22CM, 116.274.21.1 BRENTA 17CM, 116.294.21.1 BRENTA 22CM. BATTERY OPERATED WITHOUT MIXER: 116.263.21.1 PIAVE 17CM, 116.283.21.1 PIAVE 22CM, 116.273.21.1 BRENTA 17CM, 116.293.21.1 BRENTA 22CM. MAINS OPERATED WITH MIXER: 116.262.21.1 PIAVE 17CM, 116.282.21.1 PIAVE 22CM, 116.272.21.1 BRENTA 17CM, 116.292.21.1 BRENTA 22CM. MAINS OPERATED WITHOUT MIXER: 116.261.21.1 PIAVE 17CM, 116.281.21.1 PIAVE 22CM, 116.271.21.1 BRENTA 17CM, 116.291.21.1 BRENTA 22CM.
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2009312

Range of wall hung WC pan with bidet seat where the flow is controlled via a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Cold supply only. Maximum working pressure 10 bar.

Section:
0278 Bidets and associated fittings
WRAS Approval Number:
2009312
Expiry date:
30/09/2025
Size:
3/8” BSP (M)
Marking:
Geberit on cover and remote. Manufacturer, model, serial no and other technical information under cover.
Installation Requirements:
R001 R415 R574
Model:
Geberit Aqua Clean Sela 146.220.21.1 (gloss chrome) & 146.220.11.1 (white). Models added July 2023: 146.220.JT.1 (white matt), 146.250.21.1 (square gloss chrome) & 146.250.01.1 (square white).
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2009325

Range of wall hung WC pans with bidet seat where the flow is controlled via a solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The unit has a heated seat and dryer function. Cold supply only Maximum working pressure 10.0 bar.

Section:
0278 Bidets and associated fittings
WRAS Approval Number:
2009325
Expiry date:
30/09/2025
Size:
3/8” BSP (M)
Marking:
Geberit on under side of seat. Geberit, model, serial No and other technical information on back of panel.
Installation Requirements:
R001 R415 R574
Model:
Geberit AquaClean Tuma Classic Geberit AquaClean Tuma Comfort
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2101803

`Aqua Clean Mera` range of bidets incorporating an electronically operated seat, flow is controlled by solenoid valve and discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 10.0 bar. Cold water supply only.

Section:
0278 Bidets and associated fittings
WRAS Approval Number:
2101803
Expiry date:
31/01/2026
Size:
3/8” BSP captive nut
Marking:
Geberit under seat lid.
Installation Requirements:
R001 R574
Model:
Geberit AquaClean Mera Comfort 146.210.11.1 (white) 146.210.21.1 (chrome) Geberit AquaClean Mera Classic 146.200.11.1 (white) 146.200.21.1 (chrome)
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2101025

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2101025
Expiry date:
31/01/2026
Size:
1/2" BSP (M)
Marking:
Geberit and BS1212-4 on Float.
Installation Requirements:
R001 R550 R560
Model:
Product code: 828.250.00.0/Sales code: 281.222.00.1. Product code: 828.251.00.0/Sales code: 281.221.00.1.
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2103327

WC flushing cistern incorporating a bottom entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a pnuematic push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2103327
Expiry date:
31/03/2026
Size:
½” BSP (M)
Marking:
Geberit on cistern casing. 6l water line inside cistern. Geberit on flush actuators.
Installation Requirements:
R001 R280 R560 R556
Model:
109.724.21.2 109.721.00.2 111.207.00.2 111.206.21.2
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2104334

Dual flush, WC outlet valve with internal overflow, operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2104334
Expiry date:
30/04/2026
Size:
62.12mm ∅
Marking:
Geberit and Type 212 on body
Installation Requirements:
R001 R571
Model:
Geberit Type 212 Flush Valve Models added October 2021: Geberit Type 212 Flush Valve – for Omega Cisterns Geberit Type 212 Flush Valve – for Sigma and Delta Cisterns
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2106317

Range of single and dual flush WC outlet valves with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2106317
Expiry date:
30/06/2026
Size:
2” BSP (M)
Marking:
Geberit & Type printed on body.
Installation Requirements:
R001 R571
Model:
Geberit Type 290
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2106318

Dual flush WC outlet valve with ABS body and EPDM seating washers. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2106318
Expiry date:
30/06/2026
Size:
2” BSP (M)
Marking:
Geberit & Type on body.
Installation Requirements:
R001 R571
Model:
Geberit Type 240
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112346

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112346
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Geberit label on cistern. Month/Year date clock on rear cistern Geberit on flush plate. 6L waterline mould within cistern
Installation Requirements:
R001 R571
Model:
Geberit Omega concealed cistern 109.041.00.1 109.051.00.1 109.061.00.1 Geberit Omega Duofix frame for wall hung WC, 111.004.00.1 111.031.00.1 111.061.00.1 Model added July August 2023: 111.004.00.3
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112329

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres and incorporates a servicing valve and flexible hose on the inlet supply.The cistern is operated by a pnuematic push button Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112329
Expiry date:
31/12/2026
Size:
½” BSP (M)
Marking:
Geberit on cistern and inlet valve.
Installation Requirements:
R001 R556
Model:
109.103.21.2 109.104.21.2 109.105.00.1 458.118.21.2 458.119.21.2 458.132.00.1 Model added May 2023: 458.145.00.1 Models added March 2024: 458.151.21.1 458.152.21.1
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112010

Concealed WC dual flushing cistern with a BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush valve is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112010
Expiry date:
31/12/2026
Size:
1/2" BSP (M)
Marking:
Geberit on push buttons, 6 litres inside cistern.
Installation Requirements:
R001 R280 R556
Model:
Geberit Concealed Cistern Type 720
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2112330

Range of side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2112330
Expiry date:
31/12/2026
Size:
3/8” (M)
Marking:
BS1212-4, Geberit on body.
Installation Requirements:
R001 R550
Model:
Geberit Type 380 AG Side Inlet Valves; 828.257.00.0 - PBT 828.260.00.0 - Brass 828.288.00.0 - Brass plus splash guard on outlet
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2201033

Concealed WC dual flushing cistern with a BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Incorporating a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2201033
Expiry date:
31/01/2027
Size:
½” BSP (M).
Marking:
Geberit on cistern and operating members. 6 litre mark in cistern.
Installation Requirements:
R001 R556 R581
Model:
Geberit Sigma 12cm concealed cistern 6/3 litres and Duofix wall frames: 109.309.00.5 Cistern only with push fit flush pipe, 111.352.00.5 Wall frame with cistern H112cm, less abled installation, 111.384.00.5 Wall frame with cistern H112cm, 111.383.00.5 Wall frame with cistern H112cm, wall anchors & connection bend, 111.911.00.5 Wall frame with cistern H98cm, wall anchors & connection bend. Models added July 2023: 111.383.00.3, 111.911.00.3.
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Expiry date:
30/06/2027
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2210351

Mapress range of stainless steel crimped fittings and stainless steel pipe. The joint is achieved by a crimped fitting. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2210351
Expiry date:
31/10/2027
Size:
see model
Marking:
Geberit Mapress logo & size on fitting. Batch ID, DVGW & technical information on pipe Mapress logo, date of manufacture, material and other technical information
Installation Requirements:
R001
Model:
39002 Geberit Mapress Stainless Steel system pipe CrNiMo: d=15mm, L=6m 39003 Geberit Mapress Stainless Steel system pipe CrNiMo: d=18mm, L=6m 39004 Geberit Mapress Stainless Steel system pipe CrNiMo: d=22mm, L=6m 39005 Geberit Mapress Stainless Steel system pipe CrNiMo: d=28mm, L=6m 39006 Geberit Mapress Stainless Steel system pipe CrNiMo: d=35mm, L=6m 39007 Geberit Mapress Stainless Steel system pipe CrNiMo: d=42mm, L=6m 39008 Geberit Mapress Stainless Steel system pipe CrNiMo: d=54mm, L=6m 39009 Geberit Mapress Stainless Steel system pipe CrNiMo: d=76.1mm, L=6m 39010 Geberit Mapress Stainless Steel system pipe CrNiMo: d=88.9mm, L=6m 39011 Geberit Mapress Stainless Steel system pipe CrNiMo: d=108mm, L=6m 39042 Geberit Mapress Stainless Steel system pipe CrMoTi: d=15mm, L=6m 39043 Geberit Mapress Stainless Steel system pipe CrMoTi: d=18mm, L=6m 39044 Geberit Mapress Stainless Steel system pipe CrMoTi: d=22mm, L=6m 39045 Geberit Mapress Stainless Steel system pipe CrMoTi: d=28mm, L=6m 39046 Geberit Mapress Stainless Steel system pipe CrMoTi: d=35mm, L=6m 39047 Geberit Mapress Stainless Steel system pipe CrMoTi: d=42mm, L=6m 39048 Geberit Mapress Stainless Steel system pipe CrMoTi: d=54mm, L=6m 32050 Geberit Mapress Stainless Steel pipe nipple: d=15mm 32051 Geberit Mapress Stainless Steel pipe nipple: d=18mm 32052 Geberit Mapress Stainless Steel pipe nipple: d=22mm 32053 Geberit Mapress Stainless Steel pipe nipple: d=28mm 32054 Geberit Mapress Stainless Steel pipe nipple: d=35mm 32055 Geberit Mapress Stainless Steel pipe nipple: d=42mm 32056 Geberit Mapress Stainless Steel pipe nipple: d=54mm 32057 Geberit Mapress Stainless Steel pipe nipple: d=76.1mm 32058 Geberit Mapress Stainless Steel pipe nipple: d=88.9mm 32059 Geberit Mapress Stainless Steel pipe nipple: d=108mm 33001 Geberit Mapress Stainless Steel coupling: d=12mm 32002 Geberit Mapress Stainless Steel coupling: d=15mm 32003 Geberit Mapress Stainless Steel coupling: d=18mm 32004 Geberit Mapress Stainless Steel coupling: d=22mm 32005 Geberit Mapress Stainless Steel coupling: d=28mm 32006 Geberit Mapress Stainless Steel coupling: d=35mm 32007 Geberit Mapress Stainless Steel coupling: d=42mm 32008 Geberit Mapress Stainless Steel coupling: d=54mm 32009 Geberit Mapress Stainless Steel coupling: d=76.1mm 32010 Geberit Mapress Stainless Steel coupling: d=88.9mm 32011 Geberit Mapress Stainless Steel coupling: d=108mm 32102 Geberit Mapress Stainless Steel slip coupling: d=15mm 32103 Geberit Mapress Stainless Steel slip coupling: d=18mm 32104 Geberit Mapress Stainless Steel slip coupling: d=22mm 32105 Geberit Mapress Stainless Steel slip coupling: d=28mm 32106 Geberit Mapress Stainless Steel slip coupling: d=35mm 32107 Geberit Mapress Stainless Steel slip coupling: d=42mm 32108 Geberit Mapress Stainless Steel slip coupling: d=54mm 32109 Geberit Mapress Stainless Steel slip coupling: d=76.1mm 32110 Geberit Mapress Stainless Steel slip coupling: d=88.9mm 32111 Geberit Mapress Stainless Steel slip coupling: d=108mm 33002 Geberit Mapress Stainless Steel reducer with plain end: d=15mm, d1=12mm 33003 Geberit Mapress Stainless Steel reducer with plain end: d=18mm, d1=12mm 32303 Geberit Mapress Stainless Steel reducer with plain end: d=18mm, d1=15mm 33004 Geberit Mapress Stainless Steel reducer with plain end: d=22mm, d1=12mm 32305 Geberit Mapress Stainless Steel reducer with plain end: d=22mm, d1=15mm 32306 Geberit Mapress Stainless Steel reducer with plain end: d=22mm, d1=18mm 32307 Geberit Mapress Stainless Steel reducer with plain end: d=28mm, d1=15mm 32308 Geberit Mapress Stainless Steel reducer with plain end: d=28mm, d1=18mm 32309 Geberit Mapress Stainless Steel reducer with plain end: d=28mm, d1=22mm 32310 Geberit Mapress Stainless Steel reducer with plain end: d=35mm, d1=15mm 32311 Geberit Mapress Stainless Steel reducer with plain end: d=35mm, d1=18mm 32312 Geberit Mapress Stainless Steel reducer with plain end: d=35mm, d1=22mm 32313 Geberit Mapress Stainless Steel reducer with plain end: d=35mm, d1=28mm 32314 Geberit Mapress Stainless Steel reducer with plain end: d=42mm, d1=15mm 32315 Geberit Mapress Stainless Steel reducer with plain end: d=42mm, d1=18mm 32316 Geberit Mapress Stainless Steel reducer with plain end: d=42mm, d1=22mm 32317 Geberit Mapress Stainless Steel reducer with plain end: d=42mm, d1=28mm 32318 Geberit Mapress Stainless Steel reducer with plain end: d=42mm, d1=35mm 32319 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=15mm 32320 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=18mm 32321 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=22mm 32322 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=28mm 32323 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=35mm 32324 Geberit Mapress Stainless Steel reducer with plain end: d=54mm, d1=42mm 32331 Geberit Mapress Stainless Steel reducer with plain end: d=76.1mm, d1=54mm 32338 Geberit Mapress Stainless Steel reducer with plain end: d=88.9mm, d1=54mm 32339 Geberit Mapress Stainless Steel reducer with plain end: d=88.9mm, d1=76.1mm 32345 Geberit Mapress Stainless Steel reducer with plain end: d=108mm, d1=54mm 32346 Geberit Mapress Stainless Steel reducer with plain end: d=108mm, d1=76.1mm 32348 Geberit Mapress Stainless Steel reducer with plain end: d=108mm, d1=88.9mm 36101 Geberit Mapress Stainless Steel bend: 15°, d=15mm 36103 Geberit Mapress Stainless Steel bend: 15°, d=22mm 36104 Geberit Mapress Stainless Steel bend: 15°, d=28mm 36105 Geberit Mapress Stainless Steel bend: 15°, d=35mm 36106 Geberit Mapress Stainless Steel bend: 15°, d=42mm 36107 Geberit Mapress Stainless Steel bend: 15°, d=54mm 36108 Geberit Mapress Stainless Steel bend: 15°, d=76.1mm 36109 Geberit Mapress Stainless Steel bend: 15°, d=88.9mm 36110 Geberit Mapress Stainless Steel bend: 15°, d=108mm 36121 Geberit Mapress Stainless Steel bend: 30°, d=15mm 36123 Geberit Mapress Stainless Steel bend: 30°, d=22mm 36124 Geberit Mapress Stainless Steel bend: 30°, d=28mm 36125 Geberit Mapress Stainless Steel bend: 30°, d=35mm 36126 Geberit Mapress Stainless Steel bend: 30°, d=42mm 36127 Geberit Mapress Stainless Steel bend: 30°, d=54mm 36128 Geberit Mapress Stainless Steel bend: 30°, d=76.1mm 36129 Geberit Mapress Stainless Steel bend: 30°, d=88.9mm 36130 Geberit Mapress Stainless Steel bend: 30°, d=108mm 30602 Geberit Mapress Stainless Steel bend: 45°, d=15mm 30603 Geberit Mapress Stainless Steel bend: 45°, d=18mm 30604 Geberit Mapress Stainless Steel bend: 45°, d=22mm 30605 Geberit Mapress Stainless Steel bend: 45°, d=28mm 32606 Geberit Mapress Stainless Steel bend: 45°, d=35mm 32607 Geberit Mapress Stainless Steel bend: 45°, d=42mm 32608 Geberit Mapress Stainless Steel bend: 45°, d=54mm 32609 Geberit Mapress Stainless Steel bend: 45°, d=76.1mm 32610 Geberit Mapress Stainless Steel bend: 45°, d=88.9mm 32611 Geberit Mapress Stainless Steel bend: 45°, d=108mm 36161 Geberit Mapress Stainless Steel bend: 60°, d=15mm 36163 Geberit Mapress Stainless Steel bend: 60°, d=22mm 36164 Geberit Mapress Stainless Steel bend: 60°, d=28mm 36165 Geberit Mapress Stainless Steel bend: 60°, d=35mm 36166 Geberit Mapress Stainless Steel bend: 60°, d=42mm 36167 Geberit Mapress Stainless Steel bend: 60°, d=54mm 36168 Geberit Mapress Stainless Steel bend: 60°, d=76.1mm 36169 Geberit Mapress Stainless Steel bend: 60°, d=88.9mm 36170 Geberit Mapress Stainless Steel bend: 60°, d=108mm 30102 Geberit Mapress Stainless Steel bend: 90°, d=15mm 30103 Geberit Mapress Stainless Steel bend: 90°, d=18mm 30104 Geberit Mapress Stainless Steel bend: 90°, d=22mm 30105 Geberit Mapress Stainless Steel bend: 90°, d=28mm 31106 Geberit Mapress Stainless Steel bend: 90°, d=35mm 31107 Geberit Mapress Stainless Steel bend: 90°, d=42mm 31108 Geberit Mapress Stainless Steel bend: 90°, d=54mm 31109 Geberit Mapress Stainless Steel bend: 90°, d=76.1mm 31110 Geberit Mapress Stainless Steel bend: 90°, d=88.9mm 31111 Geberit Mapress Stainless Steel bend: 90°, d=108mm 36111 Geberit Mapress Stainless Steel bend with plain end: 15°, d=15mm 36113 Geberit Mapress Stainless Steel bend with plain end: 15°, d=22mm 36114 Geberit Mapress Stainless Steel bend with plain end: 15°, d=28mm 36115 Geberit Mapress Stainless Steel bend with plain end: 15°, d=35mm 36116 Geberit Mapress Stainless Steel bend with plain end: 15°, d=42mm 36117 Geberit Mapress Stainless Steel bend with plain end: 15°, d=54mm 36118 Geberit Mapress Stainless Steel bend with plain end: 15°, d=76.1mm 36119 Geberit Mapress Stainless Steel bend with plain end: 15°, d=88.9mm 36120 Geberit Mapress Stainless Steel bend with plain end: 15°, d=108mm 36131 Geberit Mapress Stainless Steel bend with plain end: 30°, d=15mm 36133 Geberit Mapress Stainless Steel bend with plain end: 30°, d=22mm 36134 Geberit Mapress Stainless Steel bend with plain end: 30°, d=28mm 36135 Geberit Mapress Stainless Steel bend with plain end: 30°, d=35mm 36136 Geberit Mapress Stainless Steel bend with plain end: 30°, d=42mm 36137 Geberit Mapress Stainless Steel bend with plain end: 30°, d=54mm 36138 Geberit Mapress Stainless Steel bend with plain end: 30°, d=76.1mm 36139 Geberit Mapress Stainless Steel bend with plain end: 30°, d=88.9mm 36140 Geberit Mapress Stainless Steel bend with plain end: 30°, d=108mm 30702 Geberit Mapress Stainless Steel bend with plain end: 45°, d=15mm 30703 Geberit Mapress Stainless Steel bend with plain end: 45°, d=18mm 30704 Geberit Mapress Stainless Steel bend with plain end: 45°, d=22mm 30705 Geberit Mapress Stainless Steel bend with plain end: 45°, d=28mm 32706 Geberit Mapress Stainless Steel bend with plain end: 45°, d=35mm 32707 Geberit Mapress Stainless Steel bend with plain end: 45°, d=42mm 32708 Geberit Mapress Stainless Steel bend with plain end: 45°, d=54mm 32709 Geberit Mapress Stainless Steel bend with plain end: 45°, d=76.1mm 32710 Geberit Mapress Stainless Steel bend with plain end: 45°, d=88.9mm 32711 Geberit Mapress Stainless Steel bend with plain end: 45°, d=108mm 36171 Geberit Mapress Stainless Steel bend with plain end: 60°, d=15mm 36173 Geberit Mapress Stainless Steel bend with plain end: 60°, d=22mm 36174 Geberit Mapress Stainless Steel bend with plain end: 60°, d=28mm 36175 Geberit Mapress Stainless Steel bend with plain end: 60°, d=35mm 36176 Geberit Mapress Stainless Steel bend with plain end: 60°, d=42mm 36177 Geberit Mapress Stainless Steel bend with plain end: 60°, d=54mm 36178 Geberit Mapress Stainless Steel bend with plain end: 60°, d=76.1mm 36179 Geberit Mapress Stainless Steel bend with plain end: 60°, d=88.9mm 36180 Geberit Mapress Stainless Steel bend with plain end: 60°, d=108mm 30302 Geberit Mapress Stainless Steel bend with plain end: 90°, d=15mm 30303 Geberit Mapress Stainless Steel bend with plain end: 90°, d=18mm 30304 Geberit Mapress Stainless Steel bend with plain end: 90°, d=22mm 30305 Geberit Mapress Stainless Steel bend with plain end: 90°, d=28mm 33306 Geberit Mapress Stainless Steel bend with plain end: 90°, d=35mm 33307 Geberit Mapress Stainless Steel bend with plain end: 90°, d=42mm 33308 Geberit Mapress Stainless Steel bend with plain end: 90°, d=54mm 33309 Geberit Mapress Stainless Steel bend with plain end: 90°, d=76.1mm 33310 Geberit Mapress Stainless Steel bend with plain end: 90°, d=88.9mm 33311 Geberit Mapress Stainless Steel bend with plain end: 90°, d=108mm 30892 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=15mm 30893 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=18mm 30894 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=22mm 30905 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=28mm 30906 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=35mm 30907 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=42mm 30908 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=54mm 30009 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=76.1mm 30010 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=88.9mm 30011 Geberit Mapress Stainless Steel bend with plain ends: 15°, d=108mm 30932 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=15mm 30933 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=18mm 30934 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=22mm 30935 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=28mm 30936 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=35mm 30937 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=42mm 30938 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=54mm 30029 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=76.1mm 30030 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=88.9mm 30031 Geberit Mapress Stainless Steel bend with plain ends: 30°, d=108mm 30872 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=15mm 30873 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=18mm 30874 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=22mm 30875 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=28mm 30876 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=35mm 30877 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=42mm 30878 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=54mm 30049 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=76.1mm 30050 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=88.9mm 30051 Geberit Mapress Stainless Steel bend with plain ends: 45°, d=108mm 30942 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=15mm 30943 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=18mm 30944 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=22mm 30955 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=28mm 30956 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=35mm 30957 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=42mm 30958 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=54mm 30069 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=76.1mm 30070 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=88.9mm 30071 Geberit Mapress Stainless Steel bend with plain ends: 60°, d=108mm 30402 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=15mm 30403 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=18mm 30404 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=22mm 30405 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=28mm 30406 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=35mm 30407 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=42mm 30408 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=54mm 30089 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=76.1mm 30090 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=88.9mm 30091 Geberit Mapress Stainless Steel bend with plain ends: 90°, d=108mm 30414 Geberit Mapress Stainless Steel bend 90°, long: d=22mm 30415 Geberit Mapress Stainless Steel bend 90°, long: d=28mm 30802 Geberit Mapress Stainless Steel pipe bridge: d=15mm 30803 Geberit Mapress Stainless Steel pipe bridge: d=18mm 30804 Geberit Mapress Stainless Steel pipe bridge: d=22mm 30805 Geberit Mapress Stainless Steel pipe bridge: d=28mm 33008 Geberit Mapress Stainless Steel T-piece, equal: d=12mm 31002 Geberit Mapress Stainless Steel T-piece, equal: d=15mm 31003 Geberit Mapress Stainless Steel T-piece, equal: d=18mm 31004 Geberit Mapress Stainless Steel T-piece, equal: d=22mm 31005 Geberit Mapress Stainless Steel T-piece, equal: d=28mm 31006 Geberit Mapress Stainless Steel T-piece, equal: d=35mm 31007 Geberit Mapress Stainless Steel T-piece, equal: d=42mm 31008 Geberit Mapress Stainless Steel T-piece, equal: d=54mm 31009 Geberit Mapress Stainless Steel T-piece, equal: d=76.1mm 31010 Geberit Mapress Stainless Steel T-piece, equal: d=88.9mm 31011 Geberit Mapress Stainless Steel T-piece, equal: d=108mm 33005 Geberit Mapress Stainless Steel T-piece, reduced: d=15mm, d1=12mm, d2=15mm 33006 Geberit Mapress Stainless Steel T-piece, reduced: d=18mm, d1=12mm, d2=18mm 31208 Geberit Mapress Stainless Steel T-piece, reduced: d=18mm, d1=15mm, d2=15mm 31204 Geberit Mapress Stainless Steel T-piece, reduced: d=18mm, d1=15mm, d2=18mm 33007 Geberit Mapress Stainless Steel T-piece, reduced: d=22mm, d1=12mm, d2=22mm 31227 Geberit Mapress Stainless Steel T-piece, reduced: d=22mm, d1=15mm, d2=18mm 31206 Geberit Mapress Stainless Steel T-piece, reduced: d=22mm, d1=15mm, d2=22mm 31228 Geberit Mapress Stainless Steel T-piece, reduced: d=22mm, d1=18mm, d2=18mm 31207 Geberit Mapress Stainless Steel T-piece, reduced: d=22mm, d1=18mm, d2=22mm 31209 Geberit Mapress Stainless Steel T-piece, reduced: d=28mm, d1=15mm, d2=28mm 31210 Geberit Mapress Stainless Steel T-piece, reduced: d=28mm, d1=18mm, d2=28mm 31234 Geberit Mapress Stainless Steel T-piece, reduced: d=28mm, d1=22mm, d2=22mm 31211 Geberit Mapress Stainless Steel T-piece, reduced: d=28mm, d1=22mm, d2=28mm 31212 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=15mm, d2=35mm 31213 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=18mm, d2=35mm 31235 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=22mm, d2=28mm 31214 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=22mm, d2=35mm 31242 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=28mm, d2=28mm 31215 Geberit Mapress Stainless Steel T-piece, reduced: d=35mm, d1=28mm, d2=35mm 31216 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=15mm, d2=42mm 31217 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=18mm, d2=42mm 31243 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=22mm, d2=35mm 31218 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=22mm, d2=42mm 31251 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=28mm, d2=35mm 31219 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=28mm, d2=42mm 31220 Geberit Mapress Stainless Steel T-piece, reduced: d=42mm, d1=35mm, d2=42mm 31221 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=15mm, d2=54mm 31222 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=18mm, d2=54mm 31223 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=22mm, d2=54mm 31224 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=28mm, d2=54mm 31225 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=35mm, d2=54mm 31226 Geberit Mapress Stainless Steel T-piece, reduced: d=54mm, d1=42mm, d2=54mm 31229 Geberit Mapress Stainless Steel T-piece, reduced: d=76.1mm, d1=22mm, d2=76.1mm 31230 Geberit Mapress Stainless Steel T-piece, reduced: d=76.1mm, d1=28mm, d2=76.1mm 31231 Geberit Mapress Stainless Steel T-piece, reduced: d=76.1mm, d1=35mm, d2=76.1mm 31232 Geberit Mapress Stainless Steel T-piece, reduced: d=76.1mm, d1=42mm, d2=76.1mm 31233 Geberit Mapress Stainless Steel T-piece, reduced: d=76.1mm, d1=54mm, d2=76.1mm 31236 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=22mm, d2=88.9mm 31237 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=28mm, d2=88.9mm 31238 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=35mm, d2=88.9mm 31239 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=42mm, d2=88.9mm 31240 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=54mm, d2=88.9mm 31241 Geberit Mapress Stainless Steel T-piece, reduced: d=88.9mm, d1=76.1mm, d2=88.9mm 31244 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=22mm, d2=108mm 31245 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=28mm, d2=108mm 31246 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=35mm, d2=108mm 31247 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=42mm, d2=108mm 31248 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=54mm, d2=108mm 31249 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=76.1mm, d2=108mm 31250 Geberit Mapress Stainless Steel T-piece, reduced: d=108mm, d1=88.9mm, d2=108mm 31401 Geberit Mapress Stainless Steel T-piece with male thread: d=15mm, R=3/8", d1=15mm 31454 Geberit Mapress Stainless Steel T-piece with male thread: d=15mm, R=1/2", d1=15mm 31455 Geberit Mapress Stainless Steel T-piece with male thread: d=18mm, R=1/2", d1=18mm 31458 Geberit Mapress Stainless Steel T-piece with male thread: d=22mm, R=3/4", d1=22mm 31461 Geberit Mapress Stainless Steel T-piece with male thread: d=28mm, R=1", d1=28mm 31464 Geberit Mapress Stainless Steel T-piece with male thread: d=35mm, R=1 1/4", d1=35mm 31304 Geberit Mapress Stainless Steel T-piece with female thread: d=15mm, Rp=1/2", d1=15mm 31305 Geberit Mapress Stainless Steel T-piece with female thread: d=18mm, Rp=1/2", d1=18mm 31306 Geberit Mapress Stainless Steel T-piece with female thread: d=18mm, Rp=3/4", d1=18mm 31307 Geberit Mapress Stainless Steel T-piece with female thread: d=22mm, Rp=1/2", d1=22mm 31308 Geberit Mapress Stainless Steel T-piece with female thread: d=22mm, Rp=3/4", d1=22mm 31309 Geberit Mapress Stainless Steel T-piece with female thread: d=28mm, Rp=1/2", d1=28mm 31310 Geberit Mapress Stainless Steel T-piece with female thread: d=28mm, Rp=3/4", d1=28mm 31311 Geberit Mapress Stainless Steel T-piece with female thread: d=28mm, Rp=1", d1=28mm 31312 Geberit Mapress Stainless Steel T-piece with female thread: d=35mm, Rp=1/2", d1=35mm 31313 Geberit Mapress Stainless Steel T-piece with female thread: d=35mm, Rp=3/4", d1=35mm 31316 Geberit Mapress Stainless Steel T-piece with female thread: d=42mm, Rp=1/2", d1=42mm 31317 Geberit Mapress Stainless Steel T-piece with female thread: d=42mm, Rp=3/4", d1=42mm 31320 Geberit Mapress Stainless Steel T-piece with female thread: d=54mm, Rp=1/2", d1=54mm 31321 Geberit Mapress Stainless Steel T-piece with female thread: d=54mm, Rp=3/4", d1=54mm 31324 Geberit Mapress Stainless Steel T-piece with female thread: d=54mm, Rp=2", d1=54mm 31326 Geberit Mapress Stainless Steel T-piece with female thread: d=76.1mm, Rp=3/4", d1=76.1mm 31329 Geberit Mapress Stainless Steel T-piece with female thread: d=76.1mm, Rp=2", d1=76.1mm 31331 Geberit Mapress Stainless Steel T-piece with female thread: d=88.9mm, Rp=3/4", d1=88.9mm 31334 Geberit Mapress Stainless Steel T-piece with female thread: d=88.9mm, Rp=2", d1=88.9mm 31336 Geberit Mapress Stainless Steel T-piece with female thread: d=108mm, Rp=3/4", d1=108mm 31339 Geberit Mapress Stainless Steel T-piece with female thread: d=108mm, Rp=2", d1=108mm 32412 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=15mm, d1=17.2mm 32413 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=18mm, d1=21.3mm 32414 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=22mm, d1=26.9mm 32415 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=28mm, d1=33.7mm 32416 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=35mm, d1=42.4mm 32417 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=42mm, d1=48.3mm 32418 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=54mm, d1=60.3mm 32419 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=76.1mm, d1=76.1mm 32420 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=88.9mm, d1=88.9mm 32421 Geberit Mapress Stainless Steel adaptor with weld-on and plain end: d=108mm, d1=114.3mm 33009 Geberit Mapress Stainless Steel adaptor with male thread: d=12mm, R=1/2" 31726 Geberit Mapress Stainless Steel adaptor with male thread: d=15mm, R=3/8" 31703 Geberit Mapress Stainless Steel adaptor with male thread: d=15mm, R=1/2" 31714 Geberit Mapress Stainless Steel adaptor with male thread: d=15mm, R=3/4" 31704 Geberit Mapress Stainless Steel adaptor with male thread: d=18mm, R=1/2" 31705 Geberit Mapress Stainless Steel adaptor with male thread: d=18mm, R=3/4" 31715 Geberit Mapress Stainless Steel adaptor with male thread: d=22mm, R=1/2" 31707 Geberit Mapress Stainless Steel adaptor with male thread: d=22mm, R=3/4" 31716 Geberit Mapress Stainless Steel adaptor with male thread: d=22mm, R=1" 31717 Geberit Mapress Stainless Steel adaptor with male thread: d=28mm, R=3/4" 31708 Geberit Mapress Stainless Steel adaptor with male thread: d=28mm, R=1" 31718 Geberit Mapress Stainless Steel adaptor with male thread: d=28mm, R=1 1/4" 31719 Geberit Mapress Stainless Steel adaptor with male thread: d=35mm, R=1" 31709 Geberit Mapress Stainless Steel adaptor with male thread: d=35mm, R=1 1/4" 31720 Geberit Mapress Stainless Steel adaptor with male thread: d=35mm, R=1 1/2" 31721 Geberit Mapress Stainless Steel adaptor with male thread: d=42mm, R=1 1/4" 31710 Geberit Mapress Stainless Steel adaptor with male thread: d=42mm, R=1 1/2" 31722 Geberit Mapress Stainless Steel adaptor with male thread: d=54mm, R=1 1/2" 31711 Geberit Mapress Stainless Steel adaptor with male thread: d=54mm, R=2" 31713 Geberit Mapress Stainless Steel adaptor with male thread: d=76.1mm, R=2 1/2" 31724 Geberit Mapress Stainless Steel adaptor with male thread: d=88.9mm, R=3" 31731 Geberit Mapress Stainless Steel adaptor with male thread G: d=15mm, G=3/4" 31732 Geberit Mapress Stainless Steel adaptor with male thread G: d=18mm, G=3/4" 31733 Geberit Mapress Stainless Steel adaptor with male thread G: d=22mm, G=1" 31734 Geberit Mapress Stainless Steel adaptor with male thread G: d=28mm, G=1 1/4" 31735 Geberit Mapress Stainless Steel adaptor with male thread G: d=35mm, G=1 1/2" 31736 Geberit Mapress Stainless Steel adaptor with male thread G: d=42mm, G=1 3/4" 31737 Geberit Mapress Stainless Steel adaptor with male thread G: d=54mm, G=2 3/8" 31932 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=15mm, R=1/2" 31933 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=18mm, R=1/2" 31936 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=22mm, R=3/4" 31937 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=28mm, R=1" 31938 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=35mm, R=1 1/4" 31939 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=42mm, R=1 1/2" 31940 Geberit Mapress Stainless Steel adaptor with male thread and plain end: d=54mm, R=2" 33010 Geberit Mapress Stainless Steel adaptor with female thread: d=12mm, Rp=1/2" 31801 Geberit Mapress Stainless Steel adaptor with female thread: d=15mm, Rp=3/8" 31802 Geberit Mapress Stainless Steel adaptor with female thread: d=15mm, Rp=1/2" 31823 Geberit Mapress Stainless Steel adaptor with female thread: d=15mm, Rp=3/4" 31803 Geberit Mapress Stainless Steel adaptor with female thread: d=18mm, Rp=1/2" 31804 Geberit Mapress Stainless Steel adaptor with female thread: d=18mm, Rp=3/4" 31805 Geberit Mapress Stainless Steel adaptor with female thread: d=22mm, Rp=1/2" 31806 Geberit Mapress Stainless Steel adaptor with female thread: d=22mm, Rp=3/4" 31824 Geberit Mapress Stainless Steel adaptor with female thread: d=22mm, Rp=1" 31807 Geberit Mapress Stainless Steel adaptor with female thread: d=28mm, Rp=1/2" 31819 Geberit Mapress Stainless Steel adaptor with female thread: d=28mm, Rp=3/4" 31809 Geberit Mapress Stainless Steel adaptor with female thread: d=28mm, Rp=1" 31825 Geberit Mapress Stainless Steel adaptor with female thread: d=28mm, Rp=1 1/4" 31820 Geberit Mapress Stainless Steel adaptor with female thread: d=35mm, Rp=1" 31811 Geberit Mapress Stainless Steel adaptor with female thread: d=35mm, Rp=1 1/4" 31826 Geberit Mapress Stainless Steel adaptor with female thread: d=35mm, Rp=1 1/2" 31821 Geberit Mapress Stainless Steel adaptor with female thread: d=42mm, Rp=1 1/4" 31814 Geberit Mapress Stainless Steel adaptor with female thread: d=42mm, Rp=1 1/2" 31822 Geberit Mapress Stainless Steel adaptor with female thread: d=54mm, Rp=1 1/2" 31818 Geberit Mapress Stainless Steel adaptor with female thread: d=54mm, Rp=2" 33846 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=22mm, Rp=1/2" 33848 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=28mm, Rp=1/2" 33850 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=35mm, Rp=1/2" 33852 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=42mm, Rp=1/2" 33854 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=54mm, Rp=1/2" 33860 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=76.1mm, Rp=1/2" 33862 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=88.9mm, Rp=1/2" 33864 Geberit Mapress Stainless Steel adaptor with female thread and plain end: d=108mm, Rp=1/2" 90932 Geberit Mapress Stainless Steel adaptor with female thread and plain end, long: d=15mm, Rp=1/2" 90933 Geberit Mapress Stainless Steel adaptor with female thread and plain end, long: d=18mm, Rp=1/2" 90934 Geberit Mapress Stainless Steel adaptor with female thread and plain end, long: d=18mm, Rp=3/4" 90935 Geberit Mapress Stainless Steel adaptor with female thread and plain end, long: d=22mm, Rp=1/2" 90936 Geberit Mapress Stainless Steel adaptor with female thread and plain end, long: d=22mm, Rp=3/4" 33833 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=15mm, R=1/2" 33834 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=18mm, R=1/2" 33835 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=22mm, R=3/4" 33836 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=28mm, R=1" 33837 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=35mm, R=1 1/4" 33838 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=42mm, R=1 1/2" 33839 Geberit Mapress Stainless Steel elbow adaptor 90° with male thread: d=54mm, R=2" 33802 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=15mm, Rp=3/8" 33803 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=15mm, Rp=1/2" 33804 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=18mm, Rp=1/2" 33805 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=22mm, Rp=3/4" 33806 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=28mm, Rp=1" 33807 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread: d=35mm, Rp=1 1/4" 33203 Geberit Mapress Stainless Steel elbow adaptor 90° with female thread and plain end: d=15mm, Rp=1/2" 35320 Geberit Mapress Stainless Steel union: d=15mm 35321 Geberit Mapress Stainless Steel union: d=18mm 35322 Geberit Mapress Stainless Steel union: d=22mm 35323 Geberit Mapress Stainless Steel union: d=28mm 35324 Geberit Mapress Stainless Steel union: d=35mm 35325 Geberit Mapress Stainless Steel union: d=42mm 35326 Geberit Mapress Stainless Steel union: d=54mm 35390 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=15mm 35391 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=18mm 35392 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=22mm 35393 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=28mm 35394 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=35mm 35395 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=42mm 35396 Geberit Mapress Stainless Steel union with union nut made of CrNi steel: d=54mm 35330 Geberit Mapress Stainless Steel adaptor union with male thread: d=15mm, R=1/2" 35331 Geberit Mapress Stainless Steel adaptor union with male thread: d=15mm, R=3/4" 35332 Geberit Mapress Stainless Steel adaptor union with male thread: d=18mm, R=1/2" 35333 Geberit Mapress Stainless Steel adaptor union with male thread: d=18mm, R=3/4" 35334 Geberit Mapress Stainless Steel adaptor union with male thread: d=22mm, R=1/2" 35335 Geberit Mapress Stainless Steel adaptor union with male thread: d=22mm, R=3/4" 35336 Geberit Mapress Stainless Steel adaptor union with male thread: d=22mm, R=1" 35337 Geberit Mapress Stainless Steel adaptor union with male thread: d=28mm, R=1" 35338 Geberit Mapress Stainless Steel adaptor union with male thread: d=35mm, R=1 1/4" 35339 Geberit Mapress Stainless Steel adaptor union with male thread: d=42mm, R=1 1/2" 35340 Geberit Mapress Stainless Steel adaptor union with male thread: d=54mm, R=2" 35360 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=15mm, R=1/2" 35361 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=15mm, R=3/4" 35362 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=18mm, R=1/2" 35363 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=18mm, R=3/4" 35364 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=22mm, R=1/2" 35365 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=22mm, R=3/4" 35366 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=22mm, R=1" 35367 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=28mm, R=1" 35368 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=35mm, R=1 1/4" 35369 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=42mm, R=1 1/2" 35370 Geberit Mapress Stainless Steel adaptor union with male thread, union nut made of CrNi steel: d=54mm, R=2" 35400 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=15mm, R=1/2" 35402 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=18mm, R=1/2" 35405 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=22mm, R=3/4" 35407 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=28mm, R=1" 35408 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=35mm, R=1 1/4" 35409 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=42mm, R=1 1/2" 35410 Geberit Mapress Stainless Steel adaptor union with male thread and plain end: d=54mm, R=2" 35300 Geberit Mapress Stainless Steel adaptor union with female thread: d=15mm, Rp=1/2" 35301 Geberit Mapress Stainless Steel adaptor union with female thread: d=15mm, Rp=3/4" 35302 Geberit Mapress Stainless Steel adaptor union with female thread: d=18mm, Rp=1/2" 35303 Geberit Mapress Stainless Steel adaptor union with female thread: d=18mm, Rp=3/4" 35304 Geberit Mapress Stainless Steel adaptor union with female thread: d=22mm, Rp=3/4" 35305 Geberit Mapress Stainless Steel adaptor union with female thread: d=22mm, Rp=1" 35306 Geberit Mapress Stainless Steel adaptor union with female thread: d=28mm, Rp=1" 35307 Geberit Mapress Stainless Steel adaptor union with female thread: d=35mm, Rp=1 1/4" 35308 Geberit Mapress Stainless Steel adaptor union with female thread: d=42mm, Rp=1 1/2" 35309 Geberit Mapress Stainless Steel adaptor union with female thread: d=54mm, Rp=2" 35350 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=15mm, Rp=1/2" 35357 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=15mm, Rp=3/4" 35351 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=18mm, Rp=1/2" 35358 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=18mm, Rp=3/4" 35352 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=22mm, Rp=3/4" 35359 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=22mm, Rp=1" 35353 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=28mm, Rp=1" 35354 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=35mm, Rp=1 1/4" 35355 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=42mm, Rp=1 1/2" 35356 Geberit Mapress Stainless Steel adaptor union with female thread, union nut made of CrNi steel: d=54mm, Rp=2" 35380 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=15mm, Rp=1/2" 35382 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=18mm, Rp=1/2" 35384 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=22mm, Rp=3/4" 35386 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=28mm, Rp=1" 35387 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=35mm, Rp=1 1/4" 35388 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=42mm, Rp=1 1/2" 35389 Geberit Mapress Stainless Steel adaptor union with female thread and plain end: d=54mm, Rp=2" 35042 Geberit Mapress Stainless Steel adaptor with union nut: d=15mm, di=10mm, di=10mm, G=1/2" 35032 Geberit Mapress Stainless Steel adaptor with union nut: d=15mm, di=13mm, di=13mm, G=3/4" 35033 Geberit Mapress Stainless Steel adaptor with union nut: d=18mm, di=13mm, di=13mm, G=3/4" 35034 Geberit Mapress Stainless Steel adaptor with union nut: d=22mm, di=20mm, di=20mm, G=1" 35044 Geberit Mapress Stainless Steel adaptor with union nut: d=22mm, di=26mm, di=26mm, G=1 1/4" 35045 Geberit Mapress Stainless Steel adaptor with union nut: d=22mm, di=32mm, di=32mm, G=1 1/2" 35046 Geberit Mapress Stainless Steel adaptor with union nut: d=28mm, di=20mm, di=20mm, G=1" 35035 Geberit Mapress Stainless Steel adaptor with union nut: d=28mm, di=26mm, di=26mm, G=1 1/4" 35047 Geberit Mapress Stainless Steel adaptor with union nut: d=28mm, di=32mm, di=32mm, G=1 1/2" 35036 Geberit Mapress Stainless Steel adaptor with union nut: d=35mm, di=32mm, di=32mm, G=1 1/2" 35037 Geberit Mapress Stainless Steel adaptor with union nut: d=42mm, di=39mm, di=39mm, G=1 3/4" 35038 Geberit Mapress Stainless Steel adaptor with union nut: d=54mm, di=51mm, di=51mm, G=2 3/8" 35039 Geberit Mapress Stainless Steel adaptor with union nut: d=76.1mm, di=73mm, di=73mm, G=3" 35040 Geberit Mapress Stainless Steel adaptor with union nut: d=88.9mm, di=84mm, di=84mm, G=3 1/2" 35132 Geberit Mapress Stainless Steel adaptor with union nut made of CrNi steel: d=15mm, di=13mm, di=13mm, G=3/4" 35134 Geberit Mapress Stainless Steel adaptor with union nut made of CrNi steel: d=22mm, di=20mm, di=20mm, G=1" 35075 Geberit Mapress Stainless Steel adaptor with union nut made of CrNi steel: d=28mm, di=32mm, di=32mm, G=1 1/2" 33732 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=15mm, DN=15 / 12 33733 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=18mm, DN=15 33734 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=22mm, DN=20 33735 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=28mm, DN=25 33736 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=35mm, DN=32 33737 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=42mm, DN=40 33738 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=54mm, DN=50 33739 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=76.1mm, DN=65 33740 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=88.9mm, DN=80 33741 Geberit Mapress Stainless Steel flange PN 10/16, with pressing socket: d=108mm, DN=100 33744 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=22mm, DN=20 33745 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=28mm, DN=25 33746 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=35mm, DN=32 33747 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=42mm, DN=40 33748 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=54mm, DN=50 33749 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=76.1mm, DN=65 33750 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=88.9mm, DN=80 33752 Geberit Mapress Stainless Steel flange PN 10/16, with plain end: d=108mm, DN=100 36149 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=22mm, DN=20, da=27mm 36150 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=28mm, DN=25, da=32mm 36151 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=35mm, DN=32, da=40mm 36152 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=42mm, DN=40, da=47mm 36153 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=54mm, DN=50, da=59mm 36154 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=76.1mm, DN=65, da=78mm 36155 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=88.9mm, DN=80, da=91mm 36156 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 6: d=108mm, DN=100, da=110mm 36141 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=22mm, DN=20, da=27mm 36142 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=28mm, DN=25, da=32mm 36143 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=35mm, DN=32, da=40mm 36144 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=42mm, DN=40, da=47mm 36145 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=54mm, DN=50, da=59mm 36146 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=76.1mm, DN=65, da=78mm 36147 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=88.9mm, DN=80, da=91mm 36148 Geberit Mapress Stainless Steel flanged stub with plain end, for loose flange PN 10/16: d=108mm, DN=100, da=110mm 33932 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=15mm 33933 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=18mm 33934 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=22mm 33935 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=28mm 33936 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=35mm 33937 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=42mm 33938 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=54mm 33939 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=76.1mm 33940 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=88.9mm 33941 Geberit Mapress Stainless Steel axial expansion fitting with pressing sockets: d=108mm 90980 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=15mm, D=2.5cm 90981 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=18mm, D=3cm 90982 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=22mm, D=3.4cm 90983 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=28mm, D=3.8cm 90984 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=35mm, D=4.5cm 90985 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=42mm, D=5.4cm 90986 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=54mm, D=7cm 90987 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=76.1mm, D=8.9cm 90988 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=88.9mm, D=10.8cm 90989 Geberit Mapress Stainless Steel bulkhead and deck passing with two plain ends: d=108mm, D=13.3cm 33212 Geberit Mapress Stainless Steel cap: d=15mm 33213 Geberit Mapress Stainless Steel cap: d=18mm 33214 Geberit Mapress Stainless Steel cap: d=22mm 33215 Geberit Mapress Stainless Steel cap: d=28mm 33216 Geberit Mapress Stainless Steel cap: d=35mm 33217 Geberit Mapress Stainless Steel cap: d=42mm 33218 Geberit Mapress Stainless Steel cap: d=54mm 33219 Geberit Mapress Stainless Steel cap: d=76.1mm 33220 Geberit Mapress Stainless Steel cap: d=88.9mm 33221 Geberit Mapress Stainless Steel cap: d=108mm 33503 Geberit Mapress Stainless Steel corner elbow 90°: d=15mm, Rp=1/2", d1=15mm, L1=4.3cm 90277 Geberit Mapress Stainless Steel welding socket: da=44mm, d=42mm 90278 Geberit Mapress Stainless Steel welding socket: da=56mm, d=54mm 90179 Geberit Mapress Stainless Steel welding socket: da=76.1mm, d=76.1mm 90100 Geberit Mapress Stainless Steel adaptor with union nut: d=54mm, di=42mm, di=42mm, G=2" 35027 Geberit Mapress Stainless Steel union nut: d=42mm, G=1 3/4"
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2210352

‘Mapress’ range copper or copper and brass “copper-press” fittings with butyl rubber (up to 54mm) or EPDM rubber (>54mm) ‘O’-rings for use with copper pipe to BS EN 1057. For above ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2210352
Expiry date:
31/10/2027
Size:
see model
Marking:
Mapress logo, size on the fittings.
Installation Requirements:
R001
Model:
62001 Geberit Mapress Copper coupling: d=12mm 62002 Geberit Mapress Copper coupling: d=15mm 62003 Geberit Mapress Copper coupling: d=18mm 62004 Geberit Mapress Copper coupling: d=22mm 62005 Geberit Mapress Copper coupling: d=28mm 62006 Geberit Mapress Copper coupling: d=35mm 62007 Geberit Mapress Copper coupling: d=42mm 62008 Geberit Mapress Copper coupling: d=54mm 62010 Geberit Mapress Copper coupling: d=66.7mm 62011 Geberit Mapress Copper coupling: d=76.1mm 62012 Geberit Mapress Copper coupling: d=88.9mm 62013 Geberit Mapress Copper coupling: d=108mm 62050 Geberit Mapress Copper coupling, reduced: CC499K, d=15mm, d1=12mm 62055 Geberit Mapress Copper coupling, reduced: CC499K, d=22mm, d1=15mm 62102 Geberit Mapress Copper slip coupling: d=15mm 62103 Geberit Mapress Copper slip coupling: d=18mm 62104 Geberit Mapress Copper slip coupling: d=22mm 62105 Geberit Mapress Copper slip coupling: d=28mm 62106 Geberit Mapress Copper slip coupling: d=35mm 62107 Geberit Mapress Copper slip coupling: d=42mm 62108 Geberit Mapress Copper slip coupling: d=54mm 62110 Geberit Mapress Copper slip coupling: d=66.7mm 62111 Geberit Mapress Copper slip coupling: d=76.1mm 62112 Geberit Mapress Copper slip coupling: d=88.9mm 62113 Geberit Mapress Copper slip coupling: d=108mm 62301 Geberit Mapress Copper reducer with plain end: d=15mm, d1=12mm 62302 Geberit Mapress Copper reducer with plain end: d=18mm, d1=12mm 62303 Geberit Mapress Copper reducer with plain end: d=18mm, d1=15mm 62305 Geberit Mapress Copper reducer with plain end: d=22mm, d1=15mm 62306 Geberit Mapress Copper reducer with plain end: d=22mm, d1=18mm 62307 Geberit Mapress Copper reducer with plain end: d=28mm, d1=15mm 62308 Geberit Mapress Copper reducer with plain end: d=28mm, d1=18mm 62309 Geberit Mapress Copper reducer with plain end: d=28mm, d1=22mm 62312 Geberit Mapress Copper reducer with plain end: d=35mm, d1=22mm 62313 Geberit Mapress Copper reducer with plain end: d=35mm, d1=28mm 62316 Geberit Mapress Copper reducer with plain end: d=42mm, d1=22mm 62317 Geberit Mapress Copper reducer with plain end: d=42mm, d1=28mm 62318 Geberit Mapress Copper reducer with plain end: d=42mm, d1=35mm 62322 Geberit Mapress Copper reducer with plain end: d=54mm, d1=28mm 62323 Geberit Mapress Copper reducer with plain end: d=54mm, d1=35mm 62324 Geberit Mapress Copper reducer with plain end: d=54mm, d1=42mm 62325 Geberit Mapress Copper reducer with plain end: d=66.7mm, d1=28mm 62326 Geberit Mapress Copper reducer with plain end: d=66.7mm, d1=35mm 62327 Geberit Mapress Copper reducer with plain end: d=66.7mm, d1=42mm 62328 Geberit Mapress Copper reducer with plain end: d=66.7mm, d1=54mm 62329 Geberit Mapress Copper reducer with plain end: d=76.1mm, d1=35mm 62330 Geberit Mapress Copper reducer with plain end: d=76.1mm, d1=42mm 62331 Geberit Mapress Copper reducer with plain end: d=76.1mm, d1=54mm 62332 Geberit Mapress Copper reducer with plain end: d=76.1mm, d1=66.7mm 62333 Geberit Mapress Copper reducer with plain end: d=88.9mm, d1=42mm 62334 Geberit Mapress Copper reducer with plain end: d=88.9mm, d1=54mm 62336 Geberit Mapress Copper reducer with plain end: d=88.9mm, d1=76.1mm 62337 Geberit Mapress Copper reducer with plain end: d=108mm, d1=42mm 62338 Geberit Mapress Copper reducer with plain end: d=108mm, d1=54mm 62339 Geberit Mapress Copper reducer with plain end: d=108mm, d1=66.7mm 62340 Geberit Mapress Copper reducer with plain end: d=108mm, d1=76.1mm 62341 Geberit Mapress Copper reducer with plain end: d=108mm, d1=88.9mm 60601 Geberit Mapress Copper bend: 45°, d=12mm 60602 Geberit Mapress Copper bend: 45°, d=15mm 60603 Geberit Mapress Copper bend: 45°, d=18mm 60604 Geberit Mapress Copper bend: 45°, d=22mm 60605 Geberit Mapress Copper bend: 45°, d=28mm 60606 Geberit Mapress Copper bend: 45°, d=35mm 60607 Geberit Mapress Copper bend: 45°, d=42mm 60608 Geberit Mapress Copper bend: 45°, d=54mm 60610 Geberit Mapress Copper bend: 45°, d=66.7mm 60611 Geberit Mapress Copper bend: 45°, d=76.1mm 60612 Geberit Mapress Copper bend: 45°, d=88.9mm 60613 Geberit Mapress Copper bend: 45°, d=108mm 60101 Geberit Mapress Copper bend: 90°, d=12mm 60102 Geberit Mapress Copper bend: 90°, d=15mm 60103 Geberit Mapress Copper bend: 90°, d=18mm 60104 Geberit Mapress Copper bend: 90°, d=22mm 60105 Geberit Mapress Copper bend: 90°, d=28mm 60106 Geberit Mapress Copper bend: 90°, d=35mm 60107 Geberit Mapress Copper bend: 90°, d=42mm 60108 Geberit Mapress Copper bend: 90°, d=54mm 60110 Geberit Mapress Copper bend: 90°, d=66.7mm 60111 Geberit Mapress Copper bend: 90°, d=76.1mm 60112 Geberit Mapress Copper bend: 90°, d=88.9mm 60113 Geberit Mapress Copper bend: 90°, d=108mm 60701 Geberit Mapress Copper bend with plain end: 45°, d=12mm 60702 Geberit Mapress Copper bend with plain end: 45°, d=15mm 60703 Geberit Mapress Copper bend with plain end: 45°, d=18mm 60704 Geberit Mapress Copper bend with plain end: 45°, d=22mm 60705 Geberit Mapress Copper bend with plain end: 45°, d=28mm 60706 Geberit Mapress Copper bend with plain end: 45°, d=35mm 60707 Geberit Mapress Copper bend with plain end: 45°, d=42mm 60708 Geberit Mapress Copper bend with plain end: 45°, d=54mm 60710 Geberit Mapress Copper bend with plain end: 45°, d=66.7mm 60711 Geberit Mapress Copper bend with plain end: 45°, d=76.1mm 60712 Geberit Mapress Copper bend with plain end: 45°, d=88.9mm 60713 Geberit Mapress Copper bend with plain end: 45°, d=108mm 60301 Geberit Mapress Copper bend with plain end: 90°, d=12mm 60302 Geberit Mapress Copper bend with plain end: 90°, d=15mm 60303 Geberit Mapress Copper bend with plain end: 90°, d=18mm 60304 Geberit Mapress Copper bend with plain end: 90°, d=22mm 60305 Geberit Mapress Copper bend with plain end: 90°, d=28mm 60306 Geberit Mapress Copper bend with plain end: 90°, d=35mm 60307 Geberit Mapress Copper bend with plain end: 90°, d=42mm 60308 Geberit Mapress Copper bend with plain end: 90°, d=54mm 60310 Geberit Mapress Copper bend with plain end: 90°, d=66.7mm 60311 Geberit Mapress Copper bend with plain end: 90°, d=76.1mm 60312 Geberit Mapress Copper bend with plain end: 90°, d=88.9mm 60313 Geberit Mapress Copper bend with plain end: 90°, d=108mm 60905 Geberit Mapress Copper bend with plain ends: 15°, d=28mm 60906 Geberit Mapress Copper bend with plain ends: 15°, d=35mm 60907 Geberit Mapress Copper bend with plain ends: 15°, d=42mm 60908 Geberit Mapress Copper bend with plain ends: 15°, d=54mm 60935 Geberit Mapress Copper bend with plain ends: 30°, d=28mm 60936 Geberit Mapress Copper bend with plain ends: 30°, d=35mm 60937 Geberit Mapress Copper bend with plain ends: 30°, d=42mm 60938 Geberit Mapress Copper bend with plain ends: 30°, d=54mm 60875 Geberit Mapress Copper bend with plain ends: 45°, d=28mm 60876 Geberit Mapress Copper bend with plain ends: 45°, d=35mm 60877 Geberit Mapress Copper bend with plain ends: 45°, d=42mm 60878 Geberit Mapress Copper bend with plain ends: 45°, d=54mm 60955 Geberit Mapress Copper bend with plain ends: 60°, d=28mm 60956 Geberit Mapress Copper bend with plain ends: 60°, d=35mm 60957 Geberit Mapress Copper bend with plain ends: 60°, d=42mm 60958 Geberit Mapress Copper bend with plain ends: 60°, d=54mm 60082 Geberit Mapress Copper bend with plain ends: 90°, d=15mm 60083 Geberit Mapress Copper bend with plain ends: 90°, d=18mm 60084 Geberit Mapress Copper bend with plain ends: 90°, d=22mm 60085 Geberit Mapress Copper bend with plain ends: 90°, d=28mm 60086 Geberit Mapress Copper bend with plain ends: 90°, d=35mm 60087 Geberit Mapress Copper bend with plain ends: 90°, d=42mm 60088 Geberit Mapress Copper bend with plain ends: 90°, d=54mm 60801 Geberit Mapress Copper pipe bridge: d=12mm 60802 Geberit Mapress Copper pipe bridge: d=15mm 60803 Geberit Mapress Copper pipe bridge: d=18mm 60804 Geberit Mapress Copper pipe bridge: d=22mm 61000 Geberit Mapress Copper T-piece, equal: d=12mm 61002 Geberit Mapress Copper T-piece, equal: d=15mm 61003 Geberit Mapress Copper T-piece, equal: d=18mm 61004 Geberit Mapress Copper T-piece, equal: d=22mm 61005 Geberit Mapress Copper T-piece, equal: d=28mm 61006 Geberit Mapress Copper T-piece, equal: d=35mm 61007 Geberit Mapress Copper T-piece, equal: d=42mm 61008 Geberit Mapress Copper T-piece, equal: d=54mm 61010 Geberit Mapress Copper T-piece, equal: d=66.7mm 61011 Geberit Mapress Copper T-piece, equal: d=76.1mm 61012 Geberit Mapress Copper T-piece, equal: d=88.9mm 61013 Geberit Mapress Copper T-piece, equal: d=108mm 61243 Geberit Mapress Copper T-piece, reduced: d=15mm, d1=12mm, d2=12mm 61252 Geberit Mapress Copper T-piece, reduced: d=15mm, d1=12mm, d2=15mm 61104 Geberit Mapress Copper T-piece, reduced: d=15mm, d1=22mm, d2=15mm 61253 Geberit Mapress Copper T-piece, reduced: d=18mm, d1=12mm, d2=18mm 61235 Geberit Mapress Copper T-piece, reduced: d=18mm, d1=15mm, d2=15mm 61254 Geberit Mapress Copper T-piece, reduced: d=18mm, d1=15mm, d2=18mm 61236 Geberit Mapress Copper T-piece, reduced: d=18mm, d1=18mm, d2=15mm 61244 Geberit Mapress Copper T-piece, reduced: d=22mm, d1=12mm, d2=22mm 61240 Geberit Mapress Copper T-piece, reduced: d=22mm, d1=15mm, d2=15mm 61256 Geberit Mapress Copper T-piece, reduced: d=22mm, d1=15mm, d2=22mm 61257 Geberit Mapress Copper T-piece, reduced: d=22mm, d1=18mm, d2=22mm 61242 Geberit Mapress Copper T-piece, reduced: d=22mm, d1=22mm, d2=15mm 61259 Geberit Mapress Copper T-piece, reduced: d=28mm, d1=15mm, d2=28mm 61260 Geberit Mapress Copper T-piece, reduced: d=28mm, d1=18mm, d2=28mm 61261 Geberit Mapress Copper T-piece, reduced: d=28mm, d1=22mm, d2=28mm 61212 Geberit Mapress Copper T-piece, reduced: d=35mm, d1=15mm, d2=35mm 61213 Geberit Mapress Copper T-piece, reduced: d=35mm, d1=18mm, d2=35mm 61214 Geberit Mapress Copper T-piece, reduced: d=35mm, d1=22mm, d2=35mm 61215 Geberit Mapress Copper T-piece, reduced: d=35mm, d1=28mm, d2=35mm 61229 Geberit Mapress Copper T-piece, reduced: d=42mm, d1=15mm, d2=42mm 61217 Geberit Mapress Copper T-piece, reduced: d=42mm, d1=18mm, d2=42mm 61218 Geberit Mapress Copper T-piece, reduced: d=42mm, d1=22mm, d2=42mm 61219 Geberit Mapress Copper T-piece, reduced: d=42mm, d1=28mm, d2=42mm 61220 Geberit Mapress Copper T-piece, reduced: d=42mm, d1=35mm, d2=42mm 61227 Geberit Mapress Copper T-piece, reduced: d=54mm, d1=22mm, d2=54mm 61228 Geberit Mapress Copper T-piece, reduced: d=54mm, d1=28mm, d2=54mm 61225 Geberit Mapress Copper T-piece, reduced: d=54mm, d1=35mm, d2=54mm 61226 Geberit Mapress Copper T-piece, reduced: d=54mm, d1=42mm, d2=54mm 61280 Geberit Mapress Copper T-piece, reduced: d=66.7mm, d1=22mm, d2=66.7mm 61281 Geberit Mapress Copper T-piece, reduced: d=66.7mm, d1=28mm, d2=66.7mm 61282 Geberit Mapress Copper T-piece, reduced: d=66.7mm, d1=54mm, d2=66.7mm 61283 Geberit Mapress Copper T-piece, reduced: d=76.1mm, d1=22mm, d2=76.1mm 61284 Geberit Mapress Copper T-piece, reduced: d=76.1mm, d1=35mm, d2=76.1mm 61285 Geberit Mapress Copper T-piece, reduced: d=76.1mm, d1=42mm, d2=76.1mm 61286 Geberit Mapress Copper T-piece, reduced: d=76.1mm, d1=54mm, d2=76.1mm 61287 Geberit Mapress Copper T-piece, reduced: d=76.1mm, d1=66.7mm, d2=76.1mm 61288 Geberit Mapress Copper T-piece, reduced: d=88.9mm, d1=22mm, d2=88.9mm 61289 Geberit Mapress Copper T-piece, reduced: d=88.9mm, d1=42mm, d2=88.9mm 61290 Geberit Mapress Copper T-piece, reduced: d=88.9mm, d1=54mm, d2=88.9mm 61292 Geberit Mapress Copper T-piece, reduced: d=88.9mm, d1=76.1mm, d2=88.9mm 61293 Geberit Mapress Copper T-piece, reduced: d=108mm, d1=22mm, d2=108mm 61294 Geberit Mapress Copper T-piece, reduced: d=108mm, d1=54mm, d2=108mm 61295 Geberit Mapress Copper T-piece, reduced: d=108mm, d1=66.7mm, d2=108mm 61296 Geberit Mapress Copper T-piece, reduced: d=108mm, d1=76.1mm, d2=108mm 61297 Geberit Mapress Copper T-piece, reduced: d=108mm, d1=88.9mm, d2=108mm 61191 Geberit Mapress T-piece, reduced: CW617N, d=15mm, d1=12mm, d2=12mm 61192 Geberit Mapress T-piece, reduced: CW617N, d=18mm, d1=15mm, d2=15mm 61193 Geberit Mapress T-piece, reduced: CW617N, d=18mm, d1=18mm, d2=15mm 61194 Geberit Mapress T-piece, reduced: CW617N, d=22mm, d1=15mm, d2=15mm 61195 Geberit Mapress T-piece, reduced: CW617N, d=22mm, d1=18mm, d2=18mm 61196 Geberit Mapress T-piece, reduced: CW617N, d=22mm, d1=22mm, d2=15mm 61197 Geberit Mapress T-piece, reduced: CW617N, d=28mm, d1=22mm, d2=22mm 61352 Geberit Mapress Copper T-piece with female thread: CC499K, d=12mm, Rp=1/2", d1=12mm 61354 Geberit Mapress Copper T-piece with female thread: CC499K, d=15mm, Rp=1/2", d1=15mm 61355 Geberit Mapress Copper T-piece with female thread: CC499K, d=18mm, Rp=1/2", d1=18mm 61357 Geberit Mapress Copper T-piece with female thread: CC499K, d=22mm, Rp=1/2", d1=22mm 61395 Geberit Mapress Copper T-piece with female thread: CC499K, d=22mm, Rp=3/4", d1=22mm 61359 Geberit Mapress Copper T-piece with female thread: CC499K, d=28mm, Rp=1/2", d1=28mm 61360 Geberit Mapress Copper T-piece with female thread: CC499K, d=28mm, Rp=3/4", d1=28mm 61362 Geberit Mapress Copper T-piece with female thread: CC499K, d=35mm, Rp=1/2", d1=35mm 61366 Geberit Mapress Copper T-piece with female thread: CC499K, d=42mm, Rp=1/2", d1=42mm 61370 Geberit Mapress Copper T-piece with female thread: CC499K, d=54mm, Rp=1/2", d1=54mm 61404 Geberit Mapress Copper pipe cross 30°, reduced: d=18mm, d1=15mm 61406 Geberit Mapress Copper pipe cross 30°, reduced: d=22mm, d1=15mm 61409 Geberit Mapress Copper pipe cross 30°, reduced: d=28mm, d1=15mm 61504 Geberit Mapress Copper pipe cross, reduced, offset: d=15mm, d1=15mm 61505 Geberit Mapress Copper pipe cross, reduced, offset: d=18mm, d1=15mm 61506 Geberit Mapress Copper pipe cross, reduced, offset: d=22mm, d1=15mm 62020 Geberit Mapress Copper adaptor socket: d=15mm, d1=14mm 62022 Geberit Mapress Copper adaptor socket: d=15mm, d1=16mm 62024 Geberit Mapress Copper adaptor socket: d=18mm, d1=16mm 61701 Geberit Mapress Copper adaptor with male thread: CC499K, d=12mm, R=3/8" 61745 Geberit Mapress Copper adaptor with male thread: CC499K, d=12mm, R=1/2" 61702 Geberit Mapress Copper adaptor with male thread: CC499K, d=15mm, R=3/8" 61703 Geberit Mapress Copper adaptor with male thread: CC499K, d=15mm, R=1/2" 61714 Geberit Mapress Copper adaptor with male thread: CC499K, d=15mm, R=3/4" 61704 Geberit Mapress Copper adaptor with male thread: CC499K, d=18mm, R=1/2" 61705 Geberit Mapress Copper adaptor with male thread: CC499K, d=18mm, R=3/4" 61715 Geberit Mapress Copper adaptor with male thread: CC499K, d=22mm, R=1/2" 61707 Geberit Mapress Copper adaptor with male thread: CC499K, d=22mm, R=3/4" 61716 Geberit Mapress Copper adaptor with male thread: CC499K, d=22mm, R=1" 61717 Geberit Mapress Copper adaptor with male thread: CC499K, d=28mm, R=3/4" 61708 Geberit Mapress Copper adaptor with male thread: CC499K, d=28mm, R=1" 61718 Geberit Mapress Copper adaptor with male thread: CC499K, d=28mm, R=1 1/4" 61719 Geberit Mapress Copper adaptor with male thread: CC499K, d=35mm, R=1" 61709 Geberit Mapress Copper adaptor with male thread: CC499K, d=35mm, R=1 1/4" 61721 Geberit Mapress Copper adaptor with male thread: CC499K, d=42mm, R=1 1/4" 61710 Geberit Mapress Copper adaptor with male thread: CC499K, d=42mm, R=1 1/2" 61711 Geberit Mapress Copper adaptor with male thread: CC499K, d=54mm, R=2" 61730 Geberit Mapress Copper adaptor with male thread: CC499K, d=66.7mm, R=2 1/2" 61732 Geberit Mapress Copper adaptor with male thread: CC499K, d=76.1mm, R=2 1/2" 61733 Geberit Mapress Copper adaptor with male thread: CC499K, d=76.1mm, R=3" 61734 Geberit Mapress Copper adaptor with male thread: CC499K, d=88.9mm, R=3" 61932 Geberit Mapress Copper adaptor with male thread and plain end: CC499K, d=15mm, R=1/2" 61933 Geberit Mapress Copper adaptor with male thread and plain end: CC499K, d=18mm, R=1/2" 61935 Geberit Mapress Copper adaptor with male thread and plain end: CC499K, d=22mm, R=1/2" 61936 Geberit Mapress Copper adaptor with male thread and plain end: CC499K, d=22mm, R=3/4" 61845 Geberit Mapress Copper adaptor with female thread: CC499K, d=12mm, Rp=3/8" 61801 Geberit Mapress Copper adaptor with female thread: CC499K, d=12mm, Rp=1/2" 61846 Geberit Mapress Copper adaptor with female thread: CC499K, d=15mm, Rp=3/8" 61802 Geberit Mapress Copper adaptor with female thread: CC499K, d=15mm, Rp=1/2" 61823 Geberit Mapress Copper adaptor with female thread: CC499K, d=15mm, Rp=3/4" 61803 Geberit Mapress Copper adaptor with female thread: CC499K, d=18mm, Rp=1/2" 61804 Geberit Mapress Copper adaptor with female thread: CC499K, d=18mm, Rp=3/4" 61805 Geberit Mapress Copper adaptor with female thread: CC499K, d=22mm, Rp=1/2" 61806 Geberit Mapress Copper adaptor with female thread: CC499K, d=22mm, Rp=3/4" 61824 Geberit Mapress Copper adaptor with female thread: CC499K, d=22mm, Rp=1" 61819 Geberit Mapress Copper adaptor with female thread: CC499K, d=28mm, Rp=3/4" 61809 Geberit Mapress Copper adaptor with female thread: CC499K, d=28mm, Rp=1" 61825 Geberit Mapress Copper adaptor with female thread: CC499K, d=28mm, Rp=1 1/4" 61820 Geberit Mapress Copper adaptor with female thread: CC499K, d=35mm, Rp=1" 61811 Geberit Mapress Copper adaptor with female thread: CC499K, d=35mm, Rp=1 1/4" 61821 Geberit Mapress Copper adaptor with female thread: CC499K, d=42mm, Rp=1 1/4" 61814 Geberit Mapress Copper adaptor with female thread: CC499K, d=42mm, Rp=1 1/2" 61818 Geberit Mapress Copper adaptor with female thread: CC499K, d=54mm, Rp=2" 63558 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=15mm, Rp=1/2" 63559 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=18mm, Rp=1/2" 63560 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=18mm, Rp=3/4" 63561 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=22mm, Rp=1/2" 63562 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=22mm, Rp=3/4" 63564 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=35mm, Rp=1" 63565 Geberit Mapress Copper adaptor with female thread and plain end: CC499K, d=54mm, Rp=2" 63892 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=12mm, R=3/8" 63893 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=12mm, R=1/2" 63894 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=15mm, R=3/8" 63873 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=15mm, R=1/2" 63884 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=18mm, R=1/2" 63895 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=18mm, R=3/4" 63885 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=22mm, R=3/4" 63886 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=28mm, R=1" 63887 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=35mm, R=1 1/4" 63888 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=42mm, R=1 1/2" 63889 Geberit Mapress Copper elbow adaptor 90° with male thread: CC499K, d=54mm, R=2" 63860 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=12mm, Rp=3/8" 63861 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=12mm, Rp=1/2" 63862 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=15mm, Rp=3/8" 63853 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=15mm, Rp=1/2" 63854 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=18mm, Rp=1/2" 63863 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=18mm, Rp=3/4" 63864 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=22mm, Rp=1/2" 63855 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=22mm, Rp=3/4" 63856 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=28mm, Rp=1" 63857 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=35mm, Rp=1 1/4" 63865 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=42mm, Rp=1 1/2" 63866 Geberit Mapress Copper elbow adaptor 90° with female thread: CC499K, d=54mm, Rp=2" 65531 Geberit Mapress Copper adaptor union with male thread: CC499K, d=12mm, R=3/8" 65532 Geberit Mapress Copper adaptor union with male thread: CC499K, d=15mm, R=1/2" 65533 Geberit Mapress Copper adaptor union with male thread: CC499K, d=18mm, R=1/2" 65534 Geberit Mapress Copper adaptor union with male thread: CC499K, d=22mm, R=1/2" 65535 Geberit Mapress Copper adaptor union with male thread: CC499K, d=28mm, R=1" 65536 Geberit Mapress Copper adaptor union with male thread: CC499K, d=35mm, R=1 1/4" 65537 Geberit Mapress Copper adaptor union with male thread: CC499K, d=42mm, R=1 1/2" 65538 Geberit Mapress Copper adaptor union with male thread: CC499K, d=54mm, R=2" 65540 Geberit Mapress Copper adaptor union with male thread: CC499K, d=12mm, R=1/2" 65541 Geberit Mapress Copper adaptor union with male thread: CC499K, d=15mm, R=3/4" 65542 Geberit Mapress Copper adaptor union with male thread: CC499K, d=18mm, R=3/4" 65543 Geberit Mapress Copper adaptor union with male thread: CC499K, d=22mm, R=3/4" 65544 Geberit Mapress Copper adaptor union with male thread: CC499K, d=22mm, R=1" 65481 Geberit Mapress Copper adaptor union with female thread: CC499K, d=12mm, Rp=1/2" 65482 Geberit Mapress Copper adaptor union with female thread: CC499K, d=15mm, Rp=1/2" 65490 Geberit Mapress Copper adaptor union with female thread: CC499K, d=15mm, Rp=3/4" 65483 Geberit Mapress Copper adaptor union with female thread: CC499K, d=18mm, Rp=1/2" 65491 Geberit Mapress Copper adaptor union with female thread: CC499K, d=18mm, Rp=3/4" 65484 Geberit Mapress Copper adaptor union with female thread: CC499K, d=22mm, Rp=3/4" 65492 Geberit Mapress Copper adaptor union with female thread: CC499K, d=22mm, Rp=1" 65485 Geberit Mapress Copper adaptor union with female thread: CC499K, d=28mm, Rp=1" 65486 Geberit Mapress Copper adaptor union with female thread: CC499K, d=35mm, Rp=1 1/4" 65487 Geberit Mapress Copper adaptor union with female thread: CC499K, d=42mm, Rp=1 1/2" 65488 Geberit Mapress Copper adaptor union with female thread: CC499K, d=54mm, Rp=2" 65382 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=15mm, Rp=1/2" 65384 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=22mm, Rp=3/4" 65385 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=28mm, Rp=1" 65386 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=35mm, Rp=1 1/4" 65387 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=42mm, Rp=1 1/2" 65388 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=54mm, Rp=2" 65392 Geberit Mapress Copper elbow adaptor union 90° with female thread: CC499K, d=18mm, Rp=1/2" 65040 Geberit Mapress Copper adaptor with union nut: CC499K, d=18mm, di=20mm, G=1" 65044 Geberit Mapress Copper adaptor with union nut: CC499K, d=22mm, di=26mm, G=1 1/4" 65045 Geberit Mapress Copper adaptor with union nut: CC499K, d=22mm, di=32mm, G=1 1/2" 65046 Geberit Mapress Copper adaptor with union nut: CC499K, d=28mm, di=20mm, G=1" 65050 Geberit Mapress Copper adaptor with union nut: CC499K, d=28mm, di=32mm, G=1 1/2" 65051 Geberit Mapress Copper adaptor with union nut: CC499K, d=35mm, di=42mm, G=2" 65052 Geberit Mapress Copper adaptor with union nut: CC499K, d=42mm, di=42mm, G=2" 65053 Geberit Mapress Copper adaptor with union nut: CC499K, d=42mm, di=42mm, G=2 1/4" 65054 Geberit Mapress Copper adaptor with union nut: CC499K, d=54mm, di=54mm, G=2 1/2" 65081 Geberit Mapress Copper adaptor with union nut: CC499K, d=12mm, di=10mm, G=1/2" 65082 Geberit Mapress Copper adaptor with union nut: CC499K, d=15mm, di=13mm, G=3/4" 65083 Geberit Mapress Copper adaptor with union nut: CC499K, d=18mm, di=13mm, G=3/4" 65084 Geberit Mapress Copper adaptor with union nut: CC499K, d=22mm, di=20mm, G=1" 65085 Geberit Mapress Copper adaptor with union nut: CC499K, d=28mm, di=26mm, G=1 1/4" 65086 Geberit Mapress Copper adaptor with union nut: CC499K, d=35mm, di=32mm, G=1 1/2" 65087 Geberit Mapress Copper adaptor with union nut: CC499K, d=42mm, di=39mm, G=1 3/4" 65088 Geberit Mapress Copper adaptor with union nut: CC499K, d=54mm, di=51mm, G=2 3/8" 65090 Geberit Mapress Copper adaptor with union nut: CC499K, d=76.1mm, di=73mm, G=3" 65091 Geberit Mapress Copper adaptor with union nut: CC499K, d=88.9mm, di=84mm, G=3 1/2" 65182 Geberit Mapress Copper adaptor with union nut: CC499K, d=15mm, di=10mm, G=1/2" 63706 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=28mm, DN=25 63707 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=35mm, DN=32 63708 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=42mm, DN=40 63709 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=54mm, DN=50 63710 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=66.7mm, DN=65 63711 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=76.1mm, DN=65 63712 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=88.9mm, DN=80 63713 Geberit Mapress Copper flanged stub with plain end, for loose flange PN 10/16: d=108mm, DN=100 60231 Geberit Mapress Copper cap: d=12mm 60232 Geberit Mapress Copper cap: d=15mm 60233 Geberit Mapress Copper cap: d=18mm 60234 Geberit Mapress Copper cap: d=22mm 60235 Geberit Mapress Copper cap: d=28mm 60236 Geberit Mapress Copper cap: d=35mm 60237 Geberit Mapress Copper cap: d=42mm 60238 Geberit Mapress Copper cap: d=54mm 60239 Geberit Mapress Copper cap: d=66.7mm 60240 Geberit Mapress Copper cap: d=76.1mm 60241 Geberit Mapress Copper cap: d=88.9mm 60242 Geberit Mapress Copper cap: d=108mm
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company
Manufacturer:
Geberit Mapress GmbH
Company Name
Geberit Mapress GmbH
Address

View All Listings by this Company

Print This Approval


#2307336

Range of dual flush WC outlet valves. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Cold Water Use

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2307336
Expiry date:
31/07/2028
Size:
2” BSP (M) Inlet.
Marking:
Geberit Laser etched on the body.
Installation Requirements:
R001 R571 R581
Model:
Geberit Type 260 826.470.00.0 - standard version & Geberit Type 260 826.485.00.0 - short version.
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2401800

Screw down stop valve, with brass body, HDPE seat and handwheel operating members. Maximum working pressure 10 bar. Cold water use only.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2401800
Expiry date:
31/01/2029
Size:
½” BSP (M)
Marking:
Geberit & technical Info on handwheel.
Installation Requirements:
R001
Model:
240.269.00.1 - with handwheel (manufacturing code 883.660.00.0)
Factor:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


#2312363

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2312363
Expiry date:
31/12/2028
Size:
16mm – 75mm.
Marking:
Geberit & size on fittings. Geberit, size, model & material on pipes.
Installation Requirements:
R001
Model:
Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"
Manufacturer:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Wawick
Phone
01926 516815

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.