Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator & the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted two-hole, single outlet (fixed) combination tap assemblies (includes chromium plated brass and black plated brass finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener on models (VSN122, VSN122M, and SF2501CP) or aerator on models (BRWMBBK and BRWMBCP). The spout outlet also incorporates a stainless-steel mesh located in the outlet of models (VSN122, VSN122M, and SF2501CP). VSN122, VSN112M and SF2501CP are supplied with a ½” BSP (M) x 15mm compression adaptor. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of shower handsets (stainless steel plated plastic bodies) and shower kits. Model TUHSSWHUK/265500 Turoa is a shower handset. Model TUSRSSWHUK Turoa comprises a shower handset, hose & riser rail. Model TUWOBSSWHUK Turoa comprises a shower handset, hose & wall fitting/handset holder. Model TUKITSS Turoa comprises of a shower handset, hose & riser rail. The hoses incorporate a stainless steel strainer. The shower handset incorporates a plastic flow regulator on the inlet. Maximum operating temperature 60°C.
Range of two-hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disk headwork with single lever operating members and lockable diverter with locking mechanism to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, a shower handset and hose assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (fixed) combination taps (chromium plated brass or gold effect finish brass), incorporating rising spindle headworks and dome or cross top operating members. The spout outlet incorporates a plastic flow straightener. All models apart from the DCM113b model are supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of T-type thermostatic mixing valves with DZR brass bodies. Temperature is pre-set under a fixed cap. The inlet adaptors incorporate single check valve cartridges (verified by test, suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. Models SAVV2108, SHD108 and SEV108 incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of pillar taps (chromium plated brass) incorporating rising spindle headworks with cross top operating members. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies), incorporating ceramic cartridge headworks that control both flow and temperature with single lever operating members. The spout outlets incorporate plastic aerators and the products are supplied with a click type pop up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC
Range of shower handsets and shower kits (chromium plated brass bodies). The shower handsets incorporate a plastic flow regulator. The shower hose incorporates stainless steel strainer. Maximum operating temperature 60°C. Open outlet use only.
Single hole, single outlet (fixed) combination tap assembly (Various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a combined plastic aerator and flow restrictor. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The product incorporates a waterfall spout and is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of shower handsets with plastic face plates, chromium plated plastic bodies and plastic flow regulators at the inlet. Model WASRCPUK is a shower rose with a combined NBR washer and stainless-steel filter basket. MAHPCPUK incorporates a stainless-steel anti-tamper device in the inlet. Maximum operating temperature 60°C
Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass or gold effect finish) incorporating non-rising spindle headwork with dome type or cross top operating members. The outlets incorporate a plastic flow straightener and the products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass or matte black), incorporating a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. The AMBCPUK model is supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted bar type thermostatic bath shower mixers (brass bodies available with a variety of finishes). Incorporating a half turn ceramic disc or non-rising spindle headwork controlling the flow with a dome type operating member and a lockable self-cancelling diverter to shower outlet. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member that also incorporates a manual override button. The spout outlet incorporates a plastic aerator and a stainless steel mesh. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless-steel strainers. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The INBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks and either single lever,or cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of two hole, single outlet (fixed) combination tap assemblies (chromium or gold plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of two hole, single outlet (fixed) combination tap assemblies with brass bodies(various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerators. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated or matt black finish). The SAVV104, INS104, IND104, ETH104, ETH104BK and CDN104 models incorporate a ceramic cartridge headwork with a single lever operating member. The BTN104, NTN104 and NEL104 models incorporate quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator, except for the BTN104 and SAVV104 models which have a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic aerator and the product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Anti vandal wall mounted shower head having brass body (chromium plated brass) and EPDM ‘O’-rings. Maximum operating temperature 60°C
Range of brass bodied shower outlets (various finishes) comprising of a wall union, shower fixing bracket and a wall elbow. Model WEPB Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working temperature 65°C.
Range of concealed thermostatic blending valves having brass bodies and NBR ‘O’-rings, incorporating a ceramic cartridge headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a various operating members. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection), plastic filters and flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of flexible shower hose assemblies comprising of a multi-layered hose (silver external appearance) with a transparent PVC outer layer aluminium, PVC and polyester yarn middle layers and a black PVC inner liner, brass end connections, EPDM ‘O’-rings and/or washers. Maximum operating temperature 60°C.
Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with either cross top, single lever or dome type operating members. The DLT SPEC103 model is supplied with metal backnuts. All other models are supplied with plastic backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of pillar taps with brass bodies (chrome plated or gold effect finish /501 model), incorporating rising spindle headworks with cross top operating members. The products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C
Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener (BRBSMCPUK model) or a plastic aerator (AOBSMCPUK model). The products are supplied with metal backnuts. The shower hose incorporates a stainless steel strainer and the shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The KEBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of basin pillar taps (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal or plastic back nuts (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of shower handsets and shower kits (see model) with plastic bodies (various finishes, see model). The inlet incorporates a plastic flow restrictor. Maximum operating temperature 60°C.
Two hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Each hose inlet incorporates an EPDM seal with a stainless steel mesh filter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated or gold effect finish /501 model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Coin type wastes with chromium plated brass body and rubber seal. Supplied with a plastic backnut.
Range of shower handsets in chromium plated brass on model MH1 or chromium plated ABS on model MH1A. Model MH2 is supplied with an approved flow regulator. Maximum operating temperature 65°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks, and various operating members. The spout outlet incorporates a plastic flow straightener. Fittings are supplied with either brass or plastic backnuts depending on model. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.
Range of single hole, single outlet (swivel) combination tap assembles with brass bodies (various finishes), incorporating a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of basin pillar taps (chromium plated brass or gold effect finish /501 model) with rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies, except for /501 suffix model which is gold plated), incorporating quarter turn ceramic disc headworks or a ceramic cartridge headwork (ELAN113 & DAR113 models only), all with single lever operating members, except GE04 models which have cross top operating members. The spout outlet incorporates a plastic flow straightener, except the DAR113 model which has a plastic aerator. The DLT113 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Overhead shower outlet with a chromium plated plastic body. Incorporating a plastic flow regulator and a combined EPDM washer and stainless steel strainer on the inlet. Maximum working temperature 70°C.
Shower kit consisting of a shower handset (matt black or chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C
Page 1 of 6
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
