Water Regulations Approval Scheme Ltd

Tubes

Section Code 1863 : Elastomeric.

WRAS Approval Number: #1904083

Range of brass or stainless steel double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1904083
Expiry date:: 30/04/2024
Size:: See model.
Marking:: IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Model:: 01601 : For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2 Surface finishes: Raw Chromed Electropolished Polished Gold Bronze Copper Nickel ACR White Black Red Grey Silver Old brass Beige Green Yellow Orange Champagne Fumé Black metal Gun metal
Factor:: Gessi S.p.A.

Company Name
Gessi S.p.A.
Address
Parco Gessi - Fraz. Vintebbio 13037 Serravalle Sesia
Country
Italy
Phone
+39 0163 454111
General Email
gessi@gessi.it

View All Listings by this Company
Manufacturer:: IL Flessibile di Nicastri & C. S.r.l.

Company Name
IL Flessibile di Nicastri & C. S.r.l.
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2012012

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012012
Expiry date:: 31/12/2025
Note:: Open outlet use only.
Marking:: Solex, WRAS and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Model:: H21X0008S-01 - ½” BSP (F) conical or captive nut. H21X0008S-02 - ½” BSP (F) conical or captive nut. Models added November 2021: H21X0007S-01 - ½” BSP (F) conical or captive nut. H21X0007S-02 - ½” BSP (F) conical or captive nut. H21X0007S-03 - ½” BSP (F) conical or captive nut. H21X0007S-04 - ½” BSP (F) conical or captive nut. H21X0007S-05 - ½” BSP (F) conical or captive nut.
Manufacturer:: Xiamen Solex High-tech Industries Co,. Ltd

Company Name
Xiamen Solex High-tech Industries Co,. Ltd
Address
NO.298 sunshine western road, Haicang District, Xiamen city
Country
China

View All Listings by this Company

WRAS Approval Number: #2103319

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103319
Expiry date:: 31/03/2026
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Justlink (tradename of manufacturer), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: JL – A*B – XX – D – E – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire N = Nylon wire. E denotes the liner material and is replaced with 0 for EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number.
Manufacturer:: Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
Packaging Industrial Zone, Yuhuan, Zhejiang
Country
China
Phone
86-576-89901684

View All Listings by this Company

WRAS Approval Number: #2103334

‘PANASIA 051 series’ of stainless steel braided EPDM lined flexible hose assemblies with brass or chrome plated brass end connections. Maximum working pressure and operating temperatures: 16.0 bar and cold water use only. 10.0 bar @ 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103334
Expiry date:: 31/03/2026
Size:: DN6 bore: M10*1, F3/8, M8*1. DN8 bore: M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 bore (1,75mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN9 (1,90mm thickness): M10*1, F1/2, M1/2, F15*1, F3/8, M15, 9/16‐24UNEF‐2B, 3/8‐27UNS‐2A, F1/4‐18, 3/8‐24UNF‐2A. DN10 bore: M10*1, F1/2, M1/2, F15*1, M12*1, F3/4, 9/16‐24UNEF2B, F1/2‐14. DN11 bore: F1/2. DN13 bore: M10*1, F1/2, F3/4. DN14 bore: F1/2, F3/4.
Marking:: Panasia, WRAS, year of manufacture (YYYY) on crimped connection.
Installation Requirements:: R001
Model:: PANASIA 051 Series
Manufacturer:: Hangzhou Panasia Sanitary Ware Co. Ltd.

Company Name
Hangzhou Panasia Sanitary Ware Co. Ltd.
Address
No. 137 Baiyunyuan East Road, Tonglu, Hangzhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2012007

Range of stainless steel braided, EPDM lined flexible hose assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012007
Expiry date:: 31/12/2025
Marking:: Novoflex, WRAS, and technical info on adhesive label located on hose. VIOSPIRAL PAT UNI , year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Model:: Novaflex inox flexible connecting hose DN10, F-F 1/2'' 00-800 Novaflex inox hose F-F DN10 1/2X1/2 , 20cm 00-801 Novaflex inox hose F-F DN10 1/2X1/2 , 25cm 00-802 Novaflex inox hose F-F DN10 1/2X1/2 , 30cm 00-803 Novaflex inox hose F-F DN10 1/2X1/2 , 35cm 00-804 Novaflex inox hose F-F DN10 1/2X1/2 , 40cm 00-805 Novaflex inox hose F-F DN10 1/2X1/2 , 45cm 00-806 Novaflex inox hose F-F DN10 1/2X1/2 , 50cm 00-807 Novaflex inox hose F-F DN10 1/2X1/2 , 60cm 00-808 Novaflex inox hose F-F DN10 1/2X1/2 , 70cm 00-809 Novaflex inox hose F-F DN10 1/2X1/2 , 80cm 00-810 Novaflex inox hose F-F DN10 1/2X1/2 , 90cm 00-811 Novaflex inox hose F-F DN10 1/2X1/2 , 100cm 00-812 Novaflex inox hose F-F DN10 1/2X1/2 , 120cm 00-813 Novaflex inox hose F-F DN10 1/2X1/2 , 150cm 00-814 Novaflex inox hose F-F DN10 1/2X1/2 , 200cm Novaflex inox flexible connecting hose monoforo DN8, M10x1 - F 1/2'' 00-835 Novaflex inox hose DN8 F-M 1/2xM10x1 30CM 00-836 Novaflex inox hose DN8 F-M 1/2xM10x1 40CM 00-837 Novaflex inox hose DN8 F-M 1/2xM10x1 50CM 00-838 Novaflex inox hose DN8 F-M 1/2xM10x1 60CM 00-839 Novaflex inox hose DN8 F-M 1/2xM10x1 80CM
Factor:: Viospiral SA

Company Name
Viospiral SA
Address
10 Kehagia Str AG I Rentis 18233
Country
Piraeus

View All Listings by this Company

WRAS Approval Number: #2012325

Range of EPDM braided hoses (various options) and optional end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012325
Expiry date:: 31/12/2025
Size:: See model
Marking:: PPI, WRAS & date of manufacture (YYYY) on crimp connector.
Installation Requirements:: R001
Model:: DN8 bore diameter hose. BZG-A-B-C-XXXX Where A-B-C-XXXX can be replaced by the following options: BZG – Connection A - Connection B – Outer braided material – Length A-B Connection A and Connection B (from 01 to 13): 01=F1/2 02=F1/2 Conical Connection 03=F3/8 04=F3/4 05=15mm compression fitting (17-100) 06=F15 07= F10 08= M8*1 (L=12-100) 09= M10*1 (L=12-100) 10= M12*1 (L=12-100) 11= M12*1 (two O ring) 12= M14*1 13=T connection (L=2-110） C= Outer braided material: SS = stainless steel wire. NY= grey or black nylon wire. SR= stainless steel wire plus red nylon wire. SB= stainless steel wire plus blue nylon wire. NR= grey or black nylon wire plus red nylon wire. NB= grey or black nylon wire plus blue nylon wire. XXXX Length (15cm to 200cm): 0150=15cm 2000=200cm For example: BZG-01-09-SS-0450 would be for F1/2 x M10, stainless steel braided, 45cm long.
Manufacturer:: PPI Xiamen Industry Co Ltd

Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

WRAS Approval Number: #1904084

Range of brass or stainless steel (added January 2020) double interlocked hoses incorporating EPDM inner hoses. The hoses are supplied with EPDM gaskets. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1904084
Expiry date:: 30/04/2024
Size:: See model.
Marking:: IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Model:: 120MM – CONNECTIONS ½”: F2020CR CHROME F2020CN BLACK CHROME F2020CS BRUSHED BLACK CHROME F2020SN BRUSHED NICKEL F2020BS MATT WHITE F2020NS MATT BLACK F2020BR ANTIQUE BRONZE F2020RA ANTIQUE COPPER F2020OR GOLD F2020OS BRUSHED GOLD 150MM – CONNECTIONS ½”: F2021CR CHROME F2021CN BLACK CHROME F2021CS BRUSHED BLACK CHROME F2021SN BRUSHED NICKEL F2021BS MATT WHITE F2021NS MATT BLACK F2021BR ANTIQUE BRONZE F2021RA ANTIQUE COPPER F2021OR GOLD F2021OS BRUSHED GOLD 200MM – CONNECTIONS ½” F2022CR CHROME F2022CN BLACK CHROME F2022CS BRUSHED BLACK CHROME F2022SN BRUSHED NICKEL F2022BS MATT WHITE F2022NS MATT BLACK F2022BR ANTIQUE BRONZE F2022RA ANTIQUE COPPER F2022OR GOLD F2022OS BRUSHED GOLD MODELS ADDED SEPTEMBER 2022: F2020INOX.WR 120 MM – INOX – CONNECTION 1/2" F2021INOX.WR 150 MM – INOX – CONNECTION 1/2" F2022INOX.WR 200 MM – INOX – CONNECTION 1/2"
Factor:: Fima Carlo Frattini SPA

Company Name
Fima Carlo Frattini SPA
Country
Italy
Phone
0039 0322 9549

View All Listings by this Company
Manufacturer:: IL Flessibile di Nicastri & C. S.r.l.

Company Name
IL Flessibile di Nicastri & C. S.r.l.
Address

View All Listings by this Company

WRAS Approval Number: #2104043

Range of stainless-steel braided EPDM lined flexible hose assemblies, incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104043
Expiry date:: 30/04/2026
Size:: FS-BH-F1/2*M10: ½” captive nut x M10. FS-BH-F3/8*M10: ⅜” captive nut x M10. FS-BH-F9/16*M10: 9/16” captive nut x ½” captive nut. FS-BH-F1/2*1/2: ½” captive nut x ½” captive nut.
Marking:: Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: FS-BH-F1/2*M10 (φ 11, φ 12. Length: 250mm-1500mm). FS-BH-F3/8*M10 (φ11. Length: 250mm-1500mm). FS-BH-F9/16*M10 (φ11. Length: 250mm-1500mm). FS-BH-F1/2*1/2 (φ 11, φ 12, φ 14. Length: 250mm-1500mm).
Manufacturer:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296

View All Listings by this Company

WRAS Approval Number: #2104308

Range of PEX lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104308
Expiry date:: 30/04/2026
Size:: See model.
Marking:: Kloe, WRAS, date of manufacture (M/Y Month = A to L, Year L to W).
Installation Requirements:: R001 R008
Model:: KLOE-PEX01 series/ Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM
Manufacturer:: Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name
Taizhou Kloe Dafeng Plumbing Co, Ltd.
Address

View All Listings by this Company

WRAS Approval Number: #2104309

Range of EPDM lined stainless steel braided flexible hoses with various brass end connections Maximum working pressure 10 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104309
Expiry date:: 30/04/2026
Size:: See model.
Marking:: Kloe, WRAS, date of manufacture (M/Y, Month = A to L, Year L to W).
Installation Requirements:: R001
Model:: KLOE-EPDM01 series: Ø12(DN8) available with connections: 3/8''FIP 3/8''FIP(Elbow) ½"FIP(Ø12,Ø14) ½"MIP ½"FIP(Elbow)(Ø12) ¾"FIP M8*1(Short) M8*1(Long) M10*1(Short) M10*1(Long) M12*1(Short) M12*1(Long) 15MM Ø14(DN10) available with connections: 3/8''FIP ½"FIP(Ø12,Ø14) ¾"FIP M12*1(Short) M12*1(Long) 15MM M15*1(Female) Ø17(DN12) available with connections: ½"FIP(Ø17) ½"MIP ½"FIP(Elbow)(Ø17) ¾"FIP 15MM 22MM
Manufacturer:: Taizhou Kloe Dafeng Plumbing Co, Ltd.

Company Name
Taizhou Kloe Dafeng Plumbing Co, Ltd.
Address

View All Listings by this Company

WRAS Approval Number: #2104328

Range of stainless steel and ACB braided hoses with and EPDM liner and various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC. Hoses with plastic push fittings: maximum working pressure 6.0 bar. Maximum operating temperature 65ºC.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104328
Expiry date:: 30/04/2026
Note:: R008 applies to hoses fitted with white plastic push fittings.
Size:: See model.
Marking:: Tucai, NT, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001 R008
Model:: TAQ MINI // TAQ MINI ACB: hose bore=DN6, End connections= M15X1 Captive Nut, M8X1, 1/2" Captive Nut, M10X1, 3/8 " Captive Nut, 3/8" Elbow, M15X1, Clip10, 1/2" Elbow, Pipe end 10mm, Pipe end 15mm, Clip11. TAQ // TAQ ACB: hose bore=DN8, End connections= M10X1, M15X1, Clip11 , 1/2" Captive Nut, 3/8” Captive Nut, 3/8” Elbow, Compression fitting 12mm, M12X1, 3/8" BSP, 1/2" BSP, Compression fitting 10mm, Compression fitting 15mm, Pipe end 10mm, Pipe end 15mm, 1/2" Elbow, 1/2" valve, Clip10, M15x1 Captive nut, M8X1. TAQ FORTE // TAQ FORTE ACB: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) TAQ SUPER // TAQ SUPER ACB: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:: Tucai S.A.

Company Name
Tucai S.A.
Address
Llobateras, 10-12. Polígono Industrial Santiga, 08210 Barberà del Vallès (Barcelona)
Country
Spain
Phone
+34 93 718 95 62
General Email
info@tucai.com

View All Listings by this Company
Manufacturer:: Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China
General Email

View All Listings by this Company

WRAS Approval Number: #2105038

Chrome plated interlocked stainless steel shower hose with an EPDM inner liner and EPDM gaskets. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2105038
Expiry date:: 31/05/2026
Note:: Open outlet use only.
Size:: ½” BSP captive nut x ½” BSP captive nut.
Marking:: Kaiping Fushun Sanitary Ware Co., Ltd, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: FS001-shower hose (500mm-2000mm).
Manufacturer:: Kaiping Fushun Sanitary Ware Co., Ltd

Company Name
Kaiping Fushun Sanitary Ware Co., Ltd
Address
The third card of the first building A6-3, The fourth industrial park, Shuikou Town, Kaiping City
Country
China
Phone
0750-2707296

View All Listings by this Company

WRAS Approval Number: #2107803

Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2107803
Expiry date:: 31/07/2026
Size:: See model
Marking:: FQR, year of manufacture (YY) DN & WRAS on ferrule.
Installation Requirements:: R001
Model:: DN6 – DN6W, P6W series: 8x1, 10x1, 11x1, 12x1 15x1, F3/8”, F1/2”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN8 – DN8W, P9W series: 10x1, 11x1, 12x1, 15x1, F3/8”, F1/2”, F3/4”, M3/8”, M1/2”, NPB15, 15c.o., F1/2” c/curva, FC1/2” DN10 – DN10W series: 12x1, F3/8”, F1/2”, F¾”, M3/8”, M1/2”, NPB15, 15c.o, F1/2” c/curva, FC1/2” DN13 – DN13W series: F1/2” F¾”, M1/2”, M3/4, F1/2” c/curva
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100

View All Listings by this Company

WRAS Approval Number: #2108803

UWILL range of PVC and PEX lined shower hoses (model UW-MS1003 is PEX lined), (models UW-MS1003 and UW-MS1005) incorporate corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2108803
Expiry date:: 30/06/2026
Note:: Open outlet use only.
Size:: ½” captive nut end connections
Marking:: UWILL, WRAS, Year of manufacture (YYYY)
Installation Requirements:: R001
Model:: UW-MS1003XX UW-MS1005XX UW-SC2003 End connector size for all models is G1/2 XX means the different outer finish ,XX=01,02,03,04,05,06： 01=CP chrom plating 02=EA electropolishing 03=Brushed nickel plating 04=ORB 05=matte black 06= Natural Brass
Manufacturer:: Xiamen Uwill Sanitary Ware Co. Ltd.

Company Name
Xiamen Uwill Sanitary Ware Co. Ltd.
Address
3rd Floor, No. 82th Building, Guankouzhonglu, Jimei District
Country
Xiamen,

View All Listings by this Company

WRAS Approval Number: #2104339

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2104339
Expiry date:: 30/04/2026
Note:: R008 applies to hoses fitted with white plastic push fittings.
Size:: See model.
Marking:: Kingfisher brand logo, WRAS & date of manufacture (YY) on ferrule
Installation Requirements:: R001 R008
Model:: FLOMASTA: hose bore=DN10, End connections= Compression fitting 10mm, pushfitting 15 (plastic), Compression fitting 15mm, 1/2" Captive Nut, 1/2" Elbow , 3/8 " Captive Nut, Compression fitting 15mm w/valve, 3/4” Captive Nut, M10X1, 1/2" BSP, 3/4" BSP, pushfitting 15, M12X1, Pipe end 15mm, 3/4" Elbow, 1/2” valve, Pushfitting 15 w/valve (plastic) FLOMASTA: hose bore=DN13, End connections= 1/2" Captive Nut, 3/4” Captive Nut, Pipe end 22mm, Pipe end 15mm, 1/2" Elbow, 3/4” Elbow, 1/2" BSP, 3/4" BSP, pushfitting 22(plastic), pushfitting 22 w/valve (plastic), Compression fitting 22mm w/valve, Compression fitting 15mm, M12X1, Pushfitting 15 (plastic), Pushfitting 15 w/valve (plastic), Compression fitting 22mm.
Factor:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 PaddingtonSquare, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #1904085

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1904085
Expiry date:: 30/04/2024
Size:: See model.
Marking:: QTOO (BRAND OF D LINE) ON FERRULE ferrule.
Installation Requirements:: R001
Model:: For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2 Surface finishes: Raw Chromed Electropolished Polished Gold Bronze Copper Nickel ACR White Black Red Grey Silver Old brass Beige Green Yellow Orange Champagne Fumé Black metal Gun metal Model code key: QS5410XXX AAAA: identifies the type of external finish BBBB: identifies the type of fitting CCC : identifies the length (between 500 and 2000mm) Models Added January 2020: Stainless Steel (INOX) interlocked hoses and end connectors. Model code key: FXB2WX.AABBCCCC.DDD AA: identifies hose raw material and diameter BB: identifies the type of external finish CCCC: identifies the type of fittings DDD: identifies the length (between 50 and 200cm)
Factor:: D Line

Company Name
D Line
Address
Roskildevej 22 2620 Albertslund
Country
Denmark
Phone
+4572170138
General Email
service@dline.com

View All Listings by this Company

WRAS Approval Number: #1904090

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1904090
Expiry date:: 30/04/2024
Size:: See model.
Marking:: IL FLESSIBILE di Nicastri & C. S.r.l. logo ‘ilF’, WRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Model:: F2020CR.WR 120mm double braided flex hose - connection ½” chrome F2020CN.WR 120mm double braided flex hose - connection ½” black chrome F2020CS.WR 120mm double braided flex hose - connection ½” black brushed chrome F2020SN.WR 120mm double braided flex hose - connection ½” brushed nickel F2020BS.WR 120mm double braided flex hose - connection ½” matt white F2020NS.WR 120mm double braided flex hose - connection ½” matt black F2020BR.WR 120mm double braided flex hose - connection ½” brushed bronze F2020RA.WR 120mm double braided flex hose - connection ½” brushed copper F2020OR.WR120mm double braided flex hose - connection ½” gold F2020OS.WR 120mm double braided flex hose - connection ½” brushed gold F2020INOX.WR 120mm double braided flex hose - connection ½” inox F2021CR.WR 150mm double braided flex hose - connection ½” chrome F2021CN.WR 150mm double braided flex hose - connection ½” black chrome F2021CS.WR 150mm double braided flex hose - connection ½” black brushed chrome F2021SN.WR 150mm double braided flex hose - connection ½” brushed nickel F2021BS.WR 150mm double braided flex hose - connection ½” matt white F2021NS.WR 150mm double braided flex hose - connection ½” matt black F2021BR.WR 150mm double braided flex hose - connection ½” brushed bronze F2021RA.WR 150mm double braided flex hose - connection ½” brushed copper F2021OR.WR 150mm double braided flex hose - connection ½” gold F2021OS.WR 150mm double braided flex hose - connection ½” brushed gold F2021INOX.WR 150mm double braided flex hose - connection ½” inox F2022CR.WR 200mm double braided flex hose - connection ½” chrome F2022CN.WR 200mm double braided flex hose - connection ½” black chrome F2022CS.WR 200mm double braided flex hose - connection ½” black brushed chrome F2022SN.WR 200mm double braided flex hose - connection ½” brushed nickel F2022BS.WR 200mm double braided flex hose - connection ½” matt white F2022NS.WR 200mm double braided flex hose - connection ½” matt black F2022BR.WR 200mm double braided flex hose - connection ½” brushed bronze F2022RA.WR 200mm double braided flex hose - connection ½” brushed copper F2022OR.WR 200mm double braided flex hose - connection ½” gold F2022OS.WR 200mm double braided flex hose - connection ½” brushed gold F2022INOX.WR 200mm double braided flex hose - connection ½” inox For DN 14 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/4" knurled round nut - female 3/8" nuts - female 3/8" cylindrical connector - female 1/2" demountable connector - female 3/8 M 15 x1 M 12 x 1M For DN 15 various brass end connectors: 1/2" knurled nuts - female 1/2" hexagonal nuts - female 1/2" smooth nuts - female 1/2" conical nuts - female 1/2" anti-twist conical nuts - female 3/8 M For DN 17 brass end connectors: F1/2 x F1/2
Factor:: Fima Carlo Frattini SPA

Company Name
Fima Carlo Frattini SPA
Country
Italy
Phone
0039 0322 9549

View All Listings by this Company
Manufacturer:: IL Flessibile di Nicastri & C. S.r.l.

Company Name
IL Flessibile di Nicastri & C. S.r.l.
Address

View All Listings by this Company

WRAS Approval Number: #2109052

Range of stainless steel braided, EPDM lined flexible hose assemblies available in a range of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2109052
Expiry date:: 30/09/2026
Size:: DN6 bore diameter hose available with end connections: 3/8” BSP (F), 1/2” BSP (F), M8X1 (M), M10X1 (M), M15X1 (M) or M15X1 (F) DN8 bore diameter hose available with end connections: G3/8” BSP (F), G1/2” BSP (F), G3/4” BSP (F), M8X1 (M), M10X1 (M), M12X1 (M), 15mm Compression or M15X1 (F)
Marking:: WRAS, Hengle and date of manufacture (YYYY) on sleeve
Installation Requirements:: R001
Model:: HL-SS-E
Manufacturer:: Zhejiang Hengle Sanitary Co., Ltd.

Company Name
Zhejiang Hengle Sanitary Co., Ltd.
Address
Ganjiang Industrial, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2201803

‘PARINOX/STRONGFLEX S-200' range of stainless-steel braided EPDM lined flexible hose with various end connections (see model). Compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2201803
Expiry date:: 31/01/2027
Size:: Hose sizes DN6: 15x1 (F) elbow, ⅜” and ½” BSP (F), 15x1 (F), Tube TL ø10mm, Male MOK M8 and M10, ⅜” and ½” BSP (M). Hose sizes DN8: ⅜” and ½” BSP (F) elbow, ⅜” and ½” BSP (F), Tube TL ø10mm, Male MOK M10 and M15, ⅜” and ½” BSP (M), Comp. joint ø10mm and ø12mm. Hose sizes DN10: ½” and ¾” BSP (F) elbow, ⅜”, ½” and ¾” BSP (F), Tube TL ø15mm, Male MOK M12, ⅜”, ½” and ¾” BSP (M), Comp. joint ø15mm. Hose sizes DN13: ½” and ¾” BSP (F) elbow, ½” and ¾” BSP (F), ½” and ¾” BSP (M), Tube TL ø15mm, Comp. joint ø15mm.
Marking:: PARINOX, WRAS, DN, maximum temperature, maximum pressure, and date of manufacture (YYMM) on crimp connection.
Installation Requirements:: R001
Model:: ‘Parinox range: Part Code nomenclature constructed in the following manner: AAA.BBBBBB.CCC AAA = braiding specification including configuration of colour bands: DN6 = 288, R88, B88. DN8 - 287, R87, B87. DN10 = 282, R82, B82. DN13 = 283. BBBBBB = Manufacturing alphanumeric string. CCC = Length of the hose in mm: 500 = 500mm, U20 = 1200mm, D50 = 2500mm, T50 = 3500mm, Q00 = 4000mm. Models added 04/01/2024 Strongflex S-200 range: SF - 200 DN6 SF - 200 DN8 SF - 200 DN10 SF - 200 DN13
Factor:: Neoperl Bulgaria EOOD & Neoperl Italia Srl

Company Name
Neoperl Bulgaria EOOD & Neoperl Italia Srl
Address
Pop Bogomil Str, N1B, 09301, Dobrich
Country
Bulgaria

View All Listings by this Company
Manufacturer:: Neoperl Bulgaria EOOD & Neoperl Italia Srl

Company Name
Neoperl Bulgaria EOOD & Neoperl Italia Srl
Address
Pop Bogomil Str, N1B, 09301, Dobrich
Country
Bulgaria

View All Listings by this Company

WRAS Approval Number: #1905096

Range of stainless steel braided, EPDM lined flexible hose assemblies with captive nut inlet and push fit isolation valve outlet with brass balls. Maximum working pressure and temperature: 16.0 bar for cold water and 10.0 bar at 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1905096
Expiry date:: 31/05/2024
Size:: ½” BSP captive nut x 15mm push fit (models DG170A & DG170B). ¾” BSP captive nut x 22mm push fit (models DG171A & DG171B).
Marking:: WRAS, Flomasta and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: 5052931675548 (F ½" BSP captive nut x 15mm push fit) DG170B (F ½" BSP captive nut x 15mm push fit iso valve)
Factor:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
3 PaddingtonSquare, London
Postcode
W2 6PX

View All Listings by this Company

WRAS Approval Number: #2109011

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2109011
Expiry date:: 30/09/2026
Size:: See model
Marking:: GOLOY, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel
Manufacturer:: Xiamen Oshince Technology Co., Ltd

Company Name
Xiamen Oshince Technology Co., Ltd
Address
No.177, South Second Ring Road, Tong An Industrial district, Xiamen City

View All Listings by this Company

WRAS Approval Number: #2110340

OH Softpex® range of polyethylene lined outlet hoses with stainless steel and polyamide braiding (length 100 to 1000 mm), with various end connections. The hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110340
Expiry date:: 31/10/2026
Note:: Open outlet use only
Size:: DN6, DN8
Marking:: Neoperl, date (YYMMDD) on crimp
Installation Requirements:: R001 R008
Model:: OH Softpex® range; Part code: 39.90CD.EFG.HI Connection Sizes Quick connectors SQC Female M15 x 1 Male M8, M10, M12 Plugin D8 39.90CD.EFG.HI OH Softpex® Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information
Factor:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Country
Germany
Phone
0049 7631 1880
General Email
approvals@neoperl.de

View All Listings by this Company
Manufacturer:: Neoperl Bulgaria EOOD | NPI Italia Srl | Neoperl Faucet Components (Jiangmen) Co. Ltd | Neoperl GmbH | Neoperl Nordic A/S | Neoperl Iberica S.A.

Company Name
Neoperl Bulgaria EOOD | NPI Italia Srl | Neoperl Faucet Components (Jiangmen) Co. Ltd | Neoperl GmbH | Neoperl Nordic A/S | Neoperl Iberica S.A.
Address
General Email

View All Listings by this Company

WRAS Approval Number: #2204700

EPDM lined flexible hose assemblies with either nylon or stainless-steel braiding and a variety of end connectors. Some models are supplied with screwdriver operated isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2204700
Expiry date:: 30/04/2027
Size:: See model
Marking:: HRN’, ‘WRAS’ and date of manufacture (YY/MM) on ferrule.
Installation Requirements:: R001
Model:: Bore diameter: DN8, DN10 or DN13 End connections: ½” BSP F, 3/8” BSP F, ¾” BSP F, ½” BSP M, 3/8” BSP M & ¾” BSP M. M8, M10, M12 & M15. 10mm compression, 12mm compression, 15mm compression & 22mm compression. 3-WAY connector x 9mm Quick connector 9mm M-Quick plastic connector, 9mm M-quick Brass connector 134-A-B-C-D-E-F. The letters denote the following (for DN8): A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective. E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F Elbow, 50 = 1/2 F Elbow, 51 = 3/4 F Elbow, 52 = 3-way connector, 53 = F-quick connective, 54 = M-quick plastic connective, 55 = M-quick brass connective F denotes DN size and is replaced by: 0 = DN8. The letters denote the following (for DN10) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN10 The letters denote the following (for DN13) A and B denotes length and is replaced by 02 (90mm) up to 83 (2519mm). C denotes the code for the finish and is replaced by 02 = Grey, 04 = Black, 26 = SUS (Stainless Steel), 36 = Red and 37 = Blue. D denotes the inlet connection and is replaced by 01 = ½” F, 03 = ¾” F, 17 = ½” M, 19 = 3/4” M, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 48 = M16, 50 = 1/2" F elbow, 51 = 3/4" F elbow E denotes the outlet connection and is replaced by 01 = ½” F, 02 = 3/8” F, 03 = ¾” F, 17 = ½” M, 18 = 3/8” M, 19 = 3/4” M, 25 = M8, 27 = M10, 28 = M12, 29 = M15, 39 = 10mm compression, 40 = 12mm compression, 41 = 15mm compression, 42 = 22mm compression, 44 = 15mm compression isolation valve and 45 = 22mm compression isolation valve, 46 = 1/4" M, 47 = M14, 48 = M16, 49 = 3/8" F elbow, 50 = 1/2" F elbow, 51 = 3/4" F elbow. F denotes DN size and is replaced by: 2 = DN13
Manufacturer:: APIS (Xiamen) Co., Ltd.

Company Name
APIS (Xiamen) Co., Ltd.
Address
1F, 5F, Main building No 198-204 YingYao Road
Country
Jimei District

View All Listings by this Company

WRAS Approval Number: #2012106

Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012106
Expiry date:: 31/12/2025
Note:: Open outlet use only.
Marking:: Armera on conical nut
Installation Requirements:: R001
Model:: HO.945.4 Chrome, HO.945.5 Brushed Black, HO.945.6 Brushed Gold & HO.945.7 Brushed Stainless Steel SHOWER HOSES ½” BSP (F) conical or captive nut.
Factor:: ARMERA LIMITED

Company Name
ARMERA LIMITED
Postcode
BA2 4QE

View All Listings by this Company

WRAS Approval Number: #2110096

Range of multi-layered flexible hoses (TPE inner liner/PVC middle/PVC outer with polyester braiding in-between) and stainless-steel braided EPDM flexible hoses. The hoses are supplied with a variety of end connections incorporating brass barbed hose inserts or white plastic barbed hose inserts. The hoses may also incorporate a servicing valve (see model). The push fit connectors are to be used with copper pipe (Manufactured to EN1057), PB pipe (Manufactured to BS EN21003) & PE-x pipe (manufactured to BS EN7291-3). Products shown with a “P” suffix (eg. WFLX15P, FLX43P) are a prepacked variant of the original product eg. WFLX15, FLX43. Products shown with a “SB” suffix (eg. FLX15P-SB, WFLX28-SB) are a reduced box quantity of an existing product. Maximum working pressure and operating temperature: 12.0 bar @ 20°C and 6.0 bar @ 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110096
Expiry date:: 31/10/2026
Size:: See model.
Marking:: John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), WRAS, date of manufacture (YYWW), maximum temperature and pressure on hose. John Guest logo (brand of Reliance Worldwide Corporation (UK) Ltd.), size and maximum temperature on connector. Markings added December 2022: WRAS & DoM (YYYY) on ferrule (braided hoses only) or WRAS, DoM (YYYY) & other technical info on hose body (non-braided hoses only). JG (John guest Logo), Size and Max Temperature on Pushfit Connector (When applicable). JG (John guest Logo) and Size on Service Valve (when applicable).
Installation Requirements:: R001 R008
Model:: Speedfit x Union Nut 300mm hose: WFLX15: 15mm push-fit x ½” BSP captive nut WFLX16: 15mm push-fit x ¾” BSP captive nut WFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 500mm hose: WFLX18: 15mm push-fit x ½” BSP captive nut WFLX20: 15mm push-fit x ¾” BSP captive nut WFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Union Nut: 1000mm hose: WFLX40: 15mm push-fit x ½” BSP captive nut Speedfit x Union Nut with Service Valve: 300mm hose: WFLX37-H: 15mm push-fit x ½” BSP captive nut service valve hose WFLX39-H: 22mm push-fit x ¾” BSP captive nut service valve Hose Speedfit x Speedfit: 300mm hose: WFLX33: 10mm push-fit x 15mm push-fit WFLX17: 15mm push-fit x 15mm push-fit Speedfit x Speedfit: 500mm hose: WFLX21: 15mm push-fit x 15mm push-fit Elbow Pattern: 300mm hose: WFLX36: 15mm push-fit x ½” BSP captive nut Elbow Speedfit x Hand Tighten Nut: 300mm hose: PFLX15: 15mm push-fit x ½” BSP captive nut PFLX16: 15mm push-fit x ¾” BSP captive nut PFLX22: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Nut: 500mm hose: PFLX18: 15mm push-fit x ½” BSP captive nut PFLX19: 22mm push-fit x ¾” BSP captive nut Speedfit x Hand Tighten Union Nut with Service Valve: 300mm hose: PFLX37: 15mm push-fit x ½” BSP captive nut service valve hose PFLX37-H: 15mm push-fit x ½” BSP captive nut service valve with handle hose Speedfit x Hand Tighten Union Nut with Service Valve: 500mm hose: PFLX78: 15mm push-fit x ½” BSP captive nut service valve hose Extra Flexi Speedfit x Hand tighten Nut: 300mm hose: PFLX88: 15mm push-fit x ½” BSP captive nut Speedfit with Plastic Valve with Handle x Bulkhead connection: 429mm hose: NCWFLX54-H: 15mm push-fit service valve x ½” BSP bulkhead Speedfit with Elbow Plastic Valve with Handle x Bulkhead connection: 530mm hose: NCWFLX58-H: 15mm push-fit x ½” BSP Elbow Service Valved hose Speedfit with Plastic Valve with Handle x Hand Tighten Union Nut: 342mm hose: NCWFLX37-H: 15mm Plastic Valved Hose Connector x ½” Flexi Hose Models added December 2022. Speedfit x Union Nut: 300mm hose: WFLX15-SB: 15mm push-fit x ½” BSP captive nut, 300mm hose. WFLX16-SB: 15mm push-fit x ¾” BSP captive nut, 300mm hose. WFLX22-SB: 22mm push-fit x ¾” BSP captive nut, 300mm hose. For Monobloc Mixers WFLX28: 15mm push-fit x M10 monobloc hose kit, 300mm hose. WFLX29: 15mm push-fit x M12 monobloc hose kit, 300mm hose. Speedfit with Shut Off Valve and Hand Tighten Union Nut x Bulkhead, Short. NCWFLX98-H: 1/2” bsp BULKHEAD x 1/2 bsp Shut Off Valve Flexi Hose. (Short). SPEEDFIT X UNION NUT: 100mm hose FLX43: 15mm pushfit x ½” captive nut - 150mm hose SPEEDFIT X UNION NUT: 300mm hose FLX35, FLX35P: 15mm pushfit x ⅜” captive nut - 300mm hose FLX15, FLX15P, FLX15P-SB: 15mm pushfit x ½” captive nut - 300mm hose FLX16, FLX16P, FLX16P-SB: 15mm pushfit x ¾” captive nut - 300mm hose FLX22, FLX22P, FLX22P-SB: 22mm pushfit x ¾” captive nut - 300mm hose SPEEDFIT X UNION NUT: 500mm hose FLX18, FLX18P, FLX18P-SB: 15mm pushfit x ½” captive nut - 500mm hose FLX20, FLX20P, FLX20P-SB: 15mm pushfit x ¾” captive nut - 500mm hose FLX19, FLX19P, FLX19P-SB: 22mm pushfit x ¾” captive nut - 500mm hose. FLX23, FLX23P: 22mm pushfit x ¾” captive nut - 500mm hose SPEEDFIT X UNION NUT: 1000mm hose FLX40, FLX40P: 15mm pushfit x ½” captive nut - 1000mm hose FLX42, FLX42P: 15mm pushfit x ¾” captive nut - 1000mm hose FLX41, FLX41P: 22mm pushfit x ¾” captive nut - 1000mm hose SPEEDFIT X UNION NUT WITH SERVICE VALVE FLX37, FLX37P, FLX37P-SB: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve, FLX39, FLX39P: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve, FLX37-H: 15mm pushfit x ½” captive nut - 300mm hose – Service Valve and handle FLX39-H: 22mm pushfit x ¾” captive nut - 300mm hose – Service Valve and handle, SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 300mm hose FLX24, FLX24P, FLX24P-SB: 15mm pushfit x ½” captive nut - 300mm – Service Valve FLX25, FLX25P: 22mm pushfit x ¾” captive nut - 300mm – Service Valve. SPEEDFIT X UNION NUT WITH SERVICE VALVE W/ METAL CONNECTIONS 500mm hose FLX31, FLX31P: 15mm pushfit x ½” captive nut - 500mm – Service Valve, FLX38, FLX38P: 15mm pushfit x ¾” captive nut - 500mm – Service Valve, SPEEDFIT X SPEEDFIT- 300mm hose FLX33P: 10mm pushfit x 15mm pushfit - 300mm hose FLX17, FLX17P, FLX17P-SB: 15mm pushfit x 15mm pushfit - 300mm hose FLX26, FLX26P: 22mm pushfit - 22mm pushfit - 300mm hose SPEEDFIT X SPEEDFIT- 500mm hose FLX21, FLX21P FLX21P-SB: 15mm pushfit x 15mm pushfit - 500mm hose FLX27, FLX27P: 22mm pushfit - 22mm pushfit - 500mm hose SPEEDFIT X SPEEDFIT- 1000mm hose FLX47: 15mm pushfit x 15mm pushfit - 1000mm hose SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 300mm hose FLX44, FLX44P: 15mm pushfit x 15mm pushfit - 300mm hose – Service Valve SPEEDFIT X SPEEDFIT WITH SERVICE VALVE – 500mm hose FLX45, FLX45P: 15mm pushfit x15mm pushfit - 500mm hose – Service Valve SPEEDFIT X MALE FLX49: 15mm pushfit x ⅜” captive nut - 300mm hose SPEEDFIT X PLAIN STEM FLX53: 15mm pushfit x 15mm tube stem - 300mm hose ELBOW PATTERN FLX36, FLX36P, FLX36P-SB: 15mm pushfit x ½” captive nut (elbow) - 300mm hose, FOR MONOBLOC MIXERS-300mm hose FLX48: 12mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX28: 15mm pushfit x M10 male thread - Monobloc Kit -300mm hose FLX29, FLX29-SB: 15mm pushfit x M12 male thread - Monobloc Kit-300mm hose Pre-packaged models have a ‘P’ suffix, e.g. WFLX15P.
Factor:: Reliance Worldwide Corporation (UK) Ltd.

Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company

WRAS Approval Number: #2108808

Range of PVC and PEX lined shower hose with EPDM washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2108808
Expiry date:: 30/06/2026
Note:: Open outlet use only.
Size:: ½” captive nut end connections
Marking:: Bristan on ferrule
Installation Requirements:: R001
Model:: UW-SC2003 shower hoses.
Factor:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #2201021

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2201021
Expiry date:: 31/01/2027
Size:: See Model
Marking:: WRAS, Haoying and date of manufacture (MM/YY) on ferrule
Installation Requirements:: R001
Model:: B-EPDM-2-2: ⅜” BSP (F) x ⅜” BSP (F), B-EPDM-3-3: ½” BSP (F) x ½” BSP (F), B-EPDM-2-12: ⅜” BSP (F) x M8x1, B-EPDM-2-13: ⅜” BSP (F) x M10x1, B-EPDM-3-17: ½” BSP (F) x M13x1, B-EPDM-3-12: ½” BSP (F) x M8x1, B-EPDM-3-13: ½” BSP (F) x M10x1. Available with a nominal diameter or either DN8 or DN10, and a length of 15 to 150cm.
Manufacturer:: Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name
Ningbo Haoying Sanitary Ware Technology Co., Ltd
Address
NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #2112355

Stainless steel braided EPDM lined flexible hoses assemblies incorporating various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2112355
Expiry date:: 31/12/2026
Size:: See model
Marking:: Flexitub (brand of Eurosanitary), date of manufacture (YYYYMM), WRAS, DN on crimped connector.
Installation Requirements:: R001
Model:: B1/2":15 - F1/2" DN10: 15mm compression x 1/2" captive nut, length 15~200cm B1/2":15(vavle) - F1/2" DN10: 15mm compression and valve x 1/2" captive nut, length 20~200cm B1 1/8”:22- F3/4" DN13: 22mm compression x 3/4" captive nut, length 20~200cm
Manufacturer:: Eurosanitary Ningbo Co Ltd

Company Name
Eurosanitary Ningbo Co Ltd
Address
Zone A China European Industrial Park Cixi City China

View All Listings by this Company

WRAS Approval Number: #1909430

FIT range of stainless-steel braided EPDM lined flexible hoses. Pushfit and Valve Pushfit (Black Plastic End Connectors) models added January 2022 are for use with copper pipe (manufactured to BS EN 1057), PB Pipe (manufactured to BS 7291-2) & PE-X Pipe (manufactured to BS 7291-3). The products can be supplied with a range of end connections and seals. Some models also incorporate integral isolation valves or stainless-steel strainers. Maximum working pressure and operating temperature 12.0 bar @ 20°C, 6.0 bar @ 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1909430
Expiry date:: 30/09/2024
Note:: R008 applies to natural models and models added January 2022 only.
Size:: See model
Marking:: Qualflex, QWRAS, date of manufacture (month code and year YY) and operating parameters on ferrule.
Installation Requirements:: R001 R008
Model:: ‘FIT" range of hoses FIT5715 15MM PUSHFIT X 1/2 INCH BSP FLEXIBLE HOSE CONNECTOR 150MM LONG FIT6815 15MM PUSHFIT X 1/2 INCH BSP, FIT6815324 15MM PUSH FIT X 3/4 INCH BSP & FIT6822 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE CONNECTOR 300MM LONG FIT8315 15MM PUSHFIT X 1/2 INCH BSP, FIT831534 15MM PUSHFIT X 3/4 INCH BSP & FIT8322 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE CONNECTOR 50MM LONG FIT8015 15MM PUSHFIT X 1/2 INCH BSP, FIT801534 15MM PUSHFIT X 3/4 INCH BSP & FIT8022 22MM PUSHFIT X 3/4 INCH BSP FLEXIB15LE HOSE CONNECTOR 1000MM LONG FIT8415 15MM PUSHFIT X 1/2 INCH BSP & FIT8422 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE TAP CONNECTOR WITH SERVICE VALVE 300MM LONG FIT8715 15MM PUSHFIT X 1/2 INCH BSP & FIT871534 22MM PUSHFIT X 3/4 INCH BSP FLEXIBLE HOSE TAP CONNECTOR WITH SERVICE VALVE 500MM LONG FIT8815 15MM PUSHFIT X 15MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR WITH SERVICE VALVE 300MM LONG FIT8915 15MM PUSHFIT X 15MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR WITH SERVICE VALVE 500MM LONG FIT8115 15MM X 15MM PUSHFIT & FIT8112 22MM X 22MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR 300MM LONG FIT8215 15MM X 15MM PUSHFIT & FIT8222 22MM X 22MM PUSHFIT FLEXIBLE POLYFIT CONNECTOR 500MM LONG FIT9615 15MM X 1/2 INCH PUSHFIT & FIT9622 22M X 3/4 INCH PUSHFIT COMPRESSION FLEXIBLE HOSE TAP CONNECTOR 300MM LONG FIT9815 15MM X1/2 INCH PUSHFIT & FIT9822 22MM X 3/4 INCH PUSHFIT COMPRESSION FLEXIBLE HOSE TAP CONNECTOR 500MM LONG FIT9715 15MM PUSHFIT X 1/2 INCH COMPRESSION & FIT9722 22MM X 3/4 INCH COMPRESSION FLEXIBLE HOSE TAP CONNECTOR WITH SERIVCE VALVE 300MM LONG FIT7115 15MM PUSHFIT X 1/2 INCH BSP 90 DEGREE ELBOW FLEXIBLE HOSE CONNECTOR FIT7515M10 15MM PUSHFIT X M10 & FIT7515M12 15MM PUSHFIT X M12
Factor:: Polypipe Building Products Ltd.

Company Name
Polypipe Building Products Ltd.
Address
Broomhouse Lane, Edlington, Doncaster
Postcode
DN12 1ES
Country
South Yorkshire
Phone
+44 (0) 1709 770000 Fax: 01709 770001
General Email
marketing@polypipe.com

View All Listings by this Company
Manufacturer:: Hydralectric Ltd.

Company Name
Hydralectric Ltd.
Address
5 High Road Byfleet Surrey
Postcode
KT14 7QE
Country
United Kingdom
Phone
+44 1932 334 200
General Email
jamie.balkwill@hydralectric.com

View All Listings by this Company

WRAS Approval Number: #2211700

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. SCFA models incorporate a spherical valve. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211700
Expiry date:: 30/11/2027
Size:: see model
Marking:: IDC Fluid Control logo (E), WRAS and year of manufacture on crimp connection
Installation Requirements:: R001
Model:: ½“ compression x ½" (F) BSP captive nut: SCFA551 - DN10 SCFA553 - DN13 SCFC558 - DN8 SCFC553 - DN13 ¾“ compression x ¾" (F) BSP captive nut: SCFA773 - DN13 SCFC773 - DN13 SCFC779 - DN19
Factor:: IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name
IDC Plumbing & Heating Technology (Beijing) Ltd
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100016
Country
China

View All Listings by this Company
Manufacturer:: IDC Fluid Control Co., Ltd.

Company Name
IDC Fluid Control Co., Ltd.
Address
Mechanical & Elecrical Industrial Area. C, Yuhuan, Taizhou, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2203038

Range of stainless steel braided, PEX lined flexible hose assemblies with a variety of end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2203038
Expiry date:: 31/03/2027
Size:: see model
Marking:: Yabo, WRAS and year of manufacture on crimped connector.
Installation Requirements:: R001 R008
Model:: YB-AxA-*** “A” denotes the type of nut/connection fitting and can be replaced with any of the following: F3/8; F1/2; F3/4; M3/8; M1/2; M3/4 – BSP M8*1; M10*1; M12*1; M15*1 The suffix “***” denotes length and can be replaced with a number between 20 and 250 (cm)
Manufacturer:: Kaiping Shuikou Town Yabo Sanitary Ware Factory

Company Name
Kaiping Shuikou Town Yabo Sanitary Ware Factory
Address
5th of No.6 Zhongxing Road, Water heating City, Shuikou Town, Kaiping City, Guangdong Province
Country
China

View All Listings by this Company

WRAS Approval Number: #1906405

Range of stainless steel braided or stainless steel braided plus black nylon wire EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1906405
Expiry date:: 30/06/2024
Size:: See model
Marking:: Altecnic, WRAS and year of manufacture (YYYY) on crimped connector
Installation Requirements:: R001
Model:: See model. JL – A*B – XX – D – E - XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B (from 01 to 42): Connections 01 and 02 only applicable for DN6 bore hoses only. Connections 03, 19, 26, and 29 applicable for DN6 and DN8 bore hoses only. Connections 05, 06, 20, 21, 22, 23, 30, 35, 36, 39 and 40 applicable for DN6, DN8 and DN10 bore hoses only. Connections 04, 07, 08, 09, 10, 11, 12, 24, 31, 33, 37 and 41 applicable for DN6, DN8, DN10 and DN13 bore hoses only. Connections 13, 14 and 15 applicable for DN8, DN10, DN13 and DN19 bore hoses only. Connections 25 and 27 applicable for DN8, DN10 and DN13 bore hoses only. Connections 16, 17, 18 and 28 applicable for DN10, DN13 and DN19 bore hoses only. Connections 32, 34, 38 and 42 apply to all bore hoses. 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 19 = M8*(12-110), 26 = F15, 29 = 10mm compression, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 20 = M10*(12-110), 21 = M11*(12-110), 22 = M12*(12-110), 23 = M14*(12-110), 30 = 12mm compression fitting, 35 = 10mm pushfit, 36 = 12mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 24 = M15*(12-110), 31 = 15mm compression fitting, 33 = 15mm isolation valve, 37 = 15mm pushfit, 41 = 15mm pushfit isolation valve, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1 28 = 22mm smooth tube, 25 = M16*(12-110), 27 = 15mm smooth tube, 32 = 22mm compression fitting, 34 = 22mm isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve. XX = DN (Dimension from 06 to 19): DN6 = 06, DN8 = 08, DN10 = 10, DN13 = 13, DN19 = 19. D = Outer braided material: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire. E = Inner tube material: 1 = EPDM. XXX = Length (15cm to 200cm): 015 = 15cm … 0200 = 200cm For example: JL-09*20-08-SS-1-045 would be for F1/2 x M10, DN8, stainless steel braided, EPDM inner tube, 45cm long.
Factor:: Altecnic Ltd

Company Name
Altecnic Ltd
Postcode
ST16 1GW
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2110018

Range of stainless-steel braided EPDM lined flexible hose assemblies incorporating EPDM washers and ‘O’-rings, and various end connections, some of which include a brass bodied screwdriver operated spherical valve with chrome plated brass ball (see model). For use with copper pipe (EN 1057) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110018
Expiry date:: 31/10/2026
Size:: See model
Marking:: Yaoyao, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve.
Installation Requirements:: R001
Model:: YY-SS-E1: DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. YY-SS-E2: DN8 bore: 15mm compression, ⅜” & ½” captive nut. DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. DN17 & DN19 bore: 22mm compression, ¾” captive nut. YY-SS-E3: DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). YY-SS-E4: DN10 bore: 15mm compression with isolation valve, 15mm pushfit. DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. YY-SS-E7: DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. YY-SS-E8: DN8 bore: 15mm compression, ⅜” & ½” BSP (M). DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). DN17 & DN19 bore: 22mm compression, ¾” BSP (M). YY-SS-E9: DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. YY-SS-E10: DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. YY-SS-E11: DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit. DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. YY-SS-E12: DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).
Manufacturer:: Taizhou Yaoyao Metal Hose Co., Ltd.

Company Name
Taizhou Yaoyao Metal Hose Co., Ltd.
Address
Qinggang Industrial Zone Yuhuan Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2110112

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110112
Expiry date:: 31/10/2026
Size:: See model
Marking:: Company logo "S", WRAS, and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: SS-E1: DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. SS-E2: DN8 bore: 15mm compression, ⅜” & ½” captive nut. DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. DN17 & DN19 bore: 22mm compression, ¾” captive nut. SS-E3: DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). SS-E4: DN10 bore: 15mm compression with isolation valve, 15mm pushfit. DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. SS-E7: DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. SS-E8: DN8 bore: 15mm compression, ⅜” & ½” BSP (M). DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). DN17 & DN19 bore: 22mm compression, ¾” BSP (M). SS-E9: DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. SS-E10: DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. SS-E11: DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit. DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. SS-E12: DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).
Factor:: Ningbo Safewell Plumbing Co. Ltd.

Company Name
Ningbo Safewell Plumbing Co. Ltd.
Address
199 Xiangyun North Road Ningbo Hi-Tech Zone Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2204017

Range of EPDM or PVC lined flexible hose assemblies with either nylon braided, or chrome plated interlocking outer layer (see models). Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2204017
Expiry date:: 30/04/2027
Note:: Open outlet use only.
Size:: M15x1 x ½” BSP (F) Conical nut
Marking:: WRAS, Haoying and date of manufacture (MM/YY).
Installation Requirements:: R001
Model:: Chrome plated interlocking outer layer: CS-PVC-15-3 (DN8), CS-PVC-15-3 (DN10). Nylon braided: CN-EPDM-15-3 (DN8), CN-EPDM-15-3 (DN10).
Manufacturer:: Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name
Ningbo Haoying Sanitary Ware Technology Co., Ltd
Address
NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #2204063

Stainless steel braided, silicone lined flexible hose assembly with brass end connections Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2204063
Expiry date:: 30/04/2027
Size:: DN10 bore diameter. ½” BSP Captive Nut (M) end connection
Marking:: MRG, WRAS, DN10 and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001 R008
Model:: X312D1DW.XXX ‘XXX’ denotes the length of the hose between 15cm & 200cm.
Manufacturer:: M.R.G. S.r.l.

Company Name
M.R.G. S.r.l.
Address
Via per Baraggia, 1 28024 Gozzano (NO) Italy
Phone
+39 0322 94131

View All Listings by this Company

WRAS Approval Number: #2204068

Stainless-steel interlocked shower hose incorporating an EPDM inner liner and EPDM washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2204068
Expiry date:: 30/04/2027
Note:: Open outlet use only
Size:: ½” BSP captive nut inlet x outlet
Marking:: M&J, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: MJ-S-E Available in the following surface finishes: Chrome plated finish Gold finish Black finish Gunmetal finish White finish
Factor:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2204050

Range of stainless-steel inter-locked and PVC braided PVC lined flexible hose assemblies. Maximum operating temperature 65.0°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2204050
Expiry date:: 30/04/2027
Note:: Open outlet use only
Size:: ¾” Captive nut x ¾” Captive nut (LS-PVC-4-4 model) ½” Captive nut x ½” Captive nut (All other models)
Marking:: WRAS, HAOYING and date of manufacture (MM/YY) on captive nut.
Installation Requirements:: R001
Model:: Stainless-steel inter-locked braided models: LS-PVC-3-3 LS-PVC-4-4 LB-PVC-3-3 PVC braided models: LP-PVC-3-3
Manufacturer:: Ningbo Haoying Sanitary Ware Technology Co., Ltd

Company Name
Ningbo Haoying Sanitary Ware Technology Co., Ltd
Address
NO.1 East Shunsun South Road, Lubu Town, Yuyao, Ningbo, Zhejiang, China

View All Listings by this Company

WRAS Approval Number: #2005372

Range of stainless steel braided, PEX lined hoses incorporating various brass end connection configuration options. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2005372
Expiry date:: 31/05/2025
Note:: Please note that DN6 & DN8 hoses are manufactured at all sites. DN10, DN13 & DN15 hoses are manufactured only by NPI Italia Srl. & Neoperl Nordic A/S.
Size:: Bore diameters DN6 & DN8 may be supplied with the following end connections: Female elbow ⅜, ½, ¾”. Female ⅜, ½, ¾, 7/16, 9/16”. Tube ø8 - ø12. Male M8, M10, M12, M15. Male ⅜, ½, ¾, 7/16, 9/16”. Comp. joint ø8 - ø15. Plugin D7- D13. Bore diameter DN10 may be supplied with the following end connections: Female elbow ½, ¾”. Female ½, ¾, 1”. Tube ø8 - ø15. Male M8, M10, M12, M15. Male ½, ¾, 1”. Bore diameter DN13 may be supplied with the following end connections: Female elbow ¾”. Female ¾, 1”. Male ¾, 1”. Bore diameter DN15 may be supplied with the following end connections: Female 1”. Male 1”. Models added July 2021: Male M11 Bore diameter DN10 supplied with the following end connections: Female elbow 3/8”, Female 3/8”, Male 3/8” DN13 supplied with the following end connections: Female elbow ½ Female ½, Tube ø15, Male ½ DN15 supplied with the following end connections: Female elbow ¾ Female ¾, Tube ø15, Male ½, ¾
Marking:: Neoperl, SPX or (from January 2020) Softpex, 70°C, 10bar, DN, size & date of manufacture (YYMMDD) on end connection.
Installation Requirements:: R001 R008
Model:: UNIFLEX RANGE 93 V XX XX XXXX RANGE OF PEX LINED FLEXIBLE HOSE ASSEMBLIES Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type (supply hose, outlet hose, shower hose etc.). B = Hose (inliner) Material CD.EFG = Manufacturing sequential number. HI = Packaging information.
Factor:: Broen-Lab A/S

Company Name
Broen-Lab A/S
Address
Drejervaengtetr 2 5610 Assens Denmark

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim, D-79379
Country
Germany
Phone
0049 7631 1880

View All Listings by this Company

WRAS Approval Number: #2210701

Range of brass interlocked shower hoses (various finishes - see model) with TPE inner liner and NBR washers. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210701
Expiry date:: 31/10/2027
Size:: See model.
Marking:: Lefroy Brooks (Lion) logo on ferrule (hexagonal nut end).
Installation Requirements:: R001
Model:: XX2101YY: ½” hexagonal BSP nut inlet x outlet, XX2121YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2103YY: ½” BSP conical nut x ½" BSP hexagonal nut, XX2100YY: ½” hexagonal BSP nut inlet x outlet, XX2116YY: ½” BSP conical nut x ½" BSP hexagonal nut. Where: XX is replaced with letters to denote range: LB - Classic range. YY is replaced with appropriate letters that represent the finish/colour. Examples are (but not limited to): CP - Polished Chrome, NK - Polished Nickel, BC - Brushed Chrome, BN - Brushed Nickel, PB - Polished Brass, BPB - Brushed Brass, AB - Aged Brass, TA - Taunton, AG - Antique Gold, HRG - Hard Rubbed Gold, CM - Champagne Gold, BCM - Brushed Champagne Gold, CO - Copper, MBC - Matt Black Chrome.
Factor:: Lefroy Brooks Diffusion Ltd

Company Name
Lefroy Brooks Diffusion Ltd
Address
Unit 3 Marston Road Wolverhampton WV2 4LX

View All Listings by this Company

WRAS Approval Number: #2110120

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2110120
Expiry date:: 31/10/2026
Size:: See model
Marking:: Valtech, WRAS, and date of manufacture (YYYY) on ferrule. Flow arrow on isolation valve
Installation Requirements:: R001
Model:: FH-SS-01 DN8 bore: ⅜” & ½” captive nut, M8x1, M10x1, M12x1. FH-SS-01 DN10 bore ⅜” & ½” captive nut, M10x1, M12x1. FH-SS-02 DN8 bore: 15mm compression, ⅜” & ½” captive nut. FH-SS-02 DN10 bore: 15mm compression, ⅜”, ½” & ¾” captive nut. FH-SS-02 DN13 bore: 15mm & 22mm compression, ½” & ¾” captive nut. FH-SS-02 DN17 & DN19 bore: 22mm compression, ¾” captive nut. FH-SS-03 DN8 bore: ⅜” & ½” captive nut, ⅜” & ½” BSP (M). FH-SS-03 DN10 bore: ⅜”, ½” & ¾” captive nut, ⅜”, ½” & ¾” BSP (M). FH-SS-03 DN13 bore: ½” & ¾” captive nut, ½” & ¾” BSP (M). FH-SS-03 DN17 & DN19 bore: ¾” captive nut, ¾” BSP (M). FH-SS-04 DN10 bore: 15mm compression with isolation valve, 15mm pushfit. FH-SS-04 DN13 bore: 15mm & 22mm compression with isolation valve, 15mm & 22mm pushfit. FH-SS-04 DN17 & DN19 bore: 22mm compression with isolation valve, 22mm pushfit. FH-SS-07 DN8 bore: ⅜” & ½” BSP (M), M8x1, M10x1, M12x1. FH-SS-07 DN10 bore ⅜” & ½” BSP (M), M10x1, M12x1. FH-SS-08 DN8 bore: 15mm compression, ⅜” & ½” BSP (M). FH-SS-08 DN10 bore: 15mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN13 bore: 15mm & 22mm compression, ⅜”, ½” & ¾” BSP (M). FH-SS-08 DN17 & DN19 bore: 22mm compression, ¾” BSP (M). FH-SS-09 DN10 bore: 15mm compression with isolation valve, ⅜”, ½” & ¾” captive nut. FH-SS-09 DN13 bore: 15mm & 22mm compression with isolation valve, ½” & ¾” captive nut. FH-SS-09 DN17 and DN19 bore: 22mm compression with isolation valve, ¾” captive nut. FH-SS-10 DN8 & DN10 bore: ⅜”, ½” & ¾” captive nut, 15mm pushfit. FH-SS-10 DN13: ½” & ¾” captive nut, 15mm & 22mm pushfit. DN17 & DN19: ¾” captive nut, 22mm pushfit. FH-SS-11 DN8 & DN10 bore: ⅜”, ½” & ¾” BSP (M),15mm pushfit FH-SS-11 DN13 bore: ½” & ¾” BSP (M),15mm & 22mm pushfit. FH-SS-11 DN17 & DN19 bore: ¾” BSP (M), 22mm pushfit. FH-SS-12 DN10: 15mm compression with isolation valve, ⅜”, ½” & ¾” BSP (M). FH-SS-12 DN13: 15mm & 22mm compression with isolation valve, ½” & ¾” BSP (M). FH-SS-12 DN17 & DN19: 22mm compression with isolation valve, ¾” BSP (M).
Factor:: Ningbo Valtech Flow Control Co. Ltd.

Company Name
Ningbo Valtech Flow Control Co. Ltd.
Address
Room 610 New Oriental Times Building No.1130
Country
Baizhang East Road
Phone
0574-88001556

View All Listings by this Company

WRAS Approval Number: #2201027

Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2201027
Expiry date:: 31/01/2027
Note:: Open outlet use only.
Size:: ½" BSP captive nut inlet and outlet.
Marking:: Connection 1 (G1/2 Hexagon nut): Delmei, WRAS and year of manufacture (YYYY) on nut. Connection 3 (G1/2 External ‘O’-ring speaker connector): Delmei, WRAS and year of manufacture (YYYY) on conical nut. Connection 5 (G1/2 Full vertical wire connector): Delmei, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: Models: DH-A-B-CC-D 15cm-250cm A denotes inner diameter: 1 - 6-7mm, 2 - 7-8mm, 3- 7-9mm, 4- 10 -12mm, 5- 11 -12mm. B denotes core 1 brass, 2 stainless steel. C denotes connectors for each end: 1 G1/2 Hexagon nut, 2 G1/2 knurled nut, 3 G1/2 External ‘O’- ring speaker connector, 4 G1/2 knurled horn connector, 5 G1/2 Full vertical wire connector. PLEASE NOTE The product is not available with connection 2 or connection 4 at both ends, or combined, e.g. connection 2 at one end and connection 4 at the other. Connections 2 and 4 will always be provided with connections 1, 3 or 5 at the other end. D denotes surface finish: 1 CP, 2 MB, 3 BN, 4 EA, 5 ORB, 6 Imitation gold Example model code: DH -1-1-14-2 250cm DH shower hose with 6-7mm inner diameter, brass core, G1/2 Hexagon nut x G1/2 knurled horn connector, MB finish, 250cm length.
Manufacturer:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

WRAS Approval Number: #1906406

Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections and lengths (see model section). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 1906406
Expiry date:: 30/06/2024
Size:: See model
Marking:: Jianglin, WRAS and year of manufacture (YYYY) on crimped connector
Installation Requirements:: R001
Model:: HOSE202002 1/2” FBSP x 1/2” FBSP x 430mm FLEXIBLE HOSE HOSE202106A 3/4” MBSP X 3/4” FBSP X 1000mm FLEXIBLE HOSE HOSE202109 3/4” MBSP X 3/4” FBSP X 500mm FLEXIBLE HOSE
Factor:: Reliance Worldwide Corporation (UK) Ltd.

Company Name
Reliance Worldwide Corporation (UK) Ltd.
Address
Horton Road West Drayton Middlesex
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 (0)1895 449233

View All Listings by this Company
Manufacturer:: Yuhuan Jianglin Plumbing Hose & parts Inc

Company Name
Yuhuan Jianglin Plumbing Hose & parts Inc
Address
Jinhai Avenue Yuhuan Economic Development Zone
Postcode
China

View All Listings by this Company

WRAS Approval Number: #2012110

Elisa Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2012110
Expiry date:: 31/12/2025
Note:: Open outlet use only.
Size:: see models
Marking:: ELISA on captive nut.
Installation Requirements:: R001
Model:: 706368 1.5m smooth MB Elisa, 706369 1.5m smooth BB Elisa & 706079 1/2" BSP satin chrome Elisa shower hoses. - ½” BSP (F) conical or captive nut.
Factor:: Aqualisa Products Ltd.

Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
01959 560 000
General Email
marketing@aqualisa.com

View All Listings by this Company

WRAS Approval Number: #2210035

Range of stainless steel interlocked (H35 models) or nylon braided (H36 models) flexible hose assemblies. H35 models are available with either a silicone or TPE liner, the H36 models are available with a TPE liner only. Maximum operating temperature 60°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210035
Expiry date:: 31/10/2027
Note:: IRN R008 only applies to H36 models. Open outlet use only.
Size:: See model
Marking:: SOLEX, WRAS and date of manufacture (MM/YY) on conical nut
Installation Requirements:: R001 R008
Model:: H35X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: Metal hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: Metal hose, 1/2" BSP (F) x M15 (M), -04: Metal hose, M20 (F) x M15 (M). H36X0001S: The following suffixes are added to the model code to denote hose type and connections: -02: braided hose, 1/2" BSP (F) ANTIWIST x M15 (M), -03: braided hose, 1/2" BSP (F) x M15 (M), -04: braided hose, 1/2" BSP (F) ball joint x M15 (M), -02QC: braided hose, 1/2" BSP (F) ANTIWIST x 11mm QC fitting, -03QC: braided hose, 1/2" BSP (F) x 11mm QC fitting, -04QC: braided hose, 1/2" BSP (F) ball joint x 11mm QC fitting. Hose length can either be denoted by the length in mm after the model code, or by replacing the X. Using 1500mm as an example the code can either be: H35X0001S 1500mm or H3515000001S followed by one of the suffixes above.
Manufacturer:: Xiamen Solex High-Tech Industries Co., Ltd

Company Name
Xiamen Solex High-Tech Industries Co., Ltd
Address
No. 298 Yangguang Road West Xinyang Industrial Zone Haicang District Xiamen, Fujian
Country
China

View All Listings by this Company

WRAS Approval Number: #2210319

Range of stainless steel or nylon braided, PEX or EPDM inner liner flexible hose assemblies available in a range of various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210319
Expiry date:: 31/10/2027
Note:: R008 only applies to PEX lined hoses (GA-IL-01 series)
Size:: see model
Marking:: WRAS, year of manufacture (YYYY) and Gaoao stamped on ferrule.
Installation Requirements:: R001 R008
Model:: GA-IL-01 series: PEX inner hose Outer hose available with: Stainless steel braiding with no color or Stainless steel braiding with red color or Stainless steel braiding with blue color. Inner hose: DN6(Φ9), DN6(Φ10), DN8 or DN10. End connections: G3/8 (Type 1), G3/8 (Type 2), G1/2 (Type 1), G3/4, M8x1, M10x1 (Type 1), M12x1 (Type 1). GA-PO-01 series: EPDM inner hose Outer hose available with: Stainless steel braiding or Nylon braiding. Inner hose: DN6(Φ9), DN6(Φ10) or DN8. End connections: G3/8 (Type 2), G1/2 (Type 2), G1/2 (Type 3), G1/2 (Type 4), G1/2 (Type 5), M10x1(Type 2), M12x1 (Type 2), M12x1 (Type 3), M15x1.
Factor:: Zhejiang Gaoao Sanitary Ware Co.,Ltd, Jiangkou Branch

Company Name
Zhejiang Gaoao Sanitary Ware Co.,Ltd, Jiangkou Branch
Address
Jiangkou Branch No. 22, Yongda Road, Jiangkou Street, Huangyan District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Gaoao Sanitary Ware Co.,Ltd, Jiangkou Branch

Company Name
Zhejiang Gaoao Sanitary Ware Co.,Ltd, Jiangkou Branch
Address
Jiangkou Branch No. 22, Yongda Road, Jiangkou Street, Huangyan District, Taizhou City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #2210345

Range of stainless steel or nylon braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses with a variety of end connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2210345
Expiry date:: 31/10/2027
Size:: DN6 hoses available with the following end connections 8x1, 8x0,75, 10x1, 11x1, 12x1, 15x1, 14x1, F3/8, F1/2, F15x1, F14x1, F9/16, M3/8, M1/2, NPB Ø15, Ø15 c.o, F3/8 c/curva, F1/2 c/curva, F1/2 conical, T8 DN8 available with the following end connections 10x1, 11x1, 12x1, 15x1, 14x1, F3/8 F1/2, F3/4, F15x1; F14x1; F9/16; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; T8 DN10 hoses available with the following end connections: 12x1; F3/8; F1/2; F3/4; M3/8; M1/2; NPB Ø15; Ø15 c.o.; F3/8 c/curva; F1/2 c/curva; F1/2 conical; DN13 hoses available with the following end connections: F1/2; F3/4; M1/2; M3/4; F1/2 c/curva;
Marking:: FQR, date of manufacture (YY) & WRAS on ferrule
Installation Requirements:: R001 R008
Model:: Series DN6K Series DN6KL Series DN6KZ Series P6K Series P6KL Series P6KZ Series DN8K Series DN8KL Series DN8KZ Series DPV8K Series DPV8KL Series DPV8KZ Series P9K Series P9KL Series P9KZ Series DN10K Series DN10KL Series DN10KZ Series DN13K Series DN13KL Series DN13KZ
Manufacturer:: F.Q.R. Frattini S.R.L.

Company Name
F.Q.R. Frattini S.R.L.
Address
Via Per Borgomanero 71 28010 Briga Novarese (No)
Country
Italy
Phone
+39 0322 94100

View All Listings by this Company

WRAS Approval Number: #2103343

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Expiry date:: 31/03/2026
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Model:: JL-F1400120012487 & JL-140038003813
Factor:: Altecnic Ltd

Company Name
Altecnic Ltd
Postcode
ST16 1GW
Country
United Kingdom

View All Listings by this Company

WRAS Approval Number: #2207056

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2207056
Expiry date:: 31/07/2027
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Model:: MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.
Factor:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2211707

Range of stainless-steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2211707
Expiry date:: 30/11/2027
Size:: see model
Marking:: PC, WRAS and year of manufacture on crimp connection Plumb Centre on end
Installation Requirements:: R001
Model:: ½“ compression x ½" (F) BSP captive nut: 81891 300mm & 81832 500mm - DN10 81884 300mm & 8188 500mm - DN8 ¾“ compression x ¾" (F) BSP captive nut: 81879 500mm & 81885 300mm - DN13
Factor:: Grafton Merchanting

Company Name
Grafton Merchanting
Address
Ashfield Naas Road Dublin 22 Ireland

View All Listings by this Company