Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207065

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

FLOMASTA, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

FLOMASTA POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSEL (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). FLOMASTA POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Kingfisher

Company Name

Kingfisher

Address

Castorama France Parc D'activite Rue de l'epinoy 59175 - Templemars

Country

France

View All Listings by this Company

Range of expansion vessels with butyl membranes. Maximum working pressure 8.0, 10.0, 16.0 or 20.0 bar (please refer to model). Maximum operating temperature 70 or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2207066

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

Please refer to model.

Marking:

CENTER/ JET, WRAS, model, capacity, maximum operating pressure and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

597808 CENTER DOMESTIC POTABLE EXPANSION VESSEL (80 Litres) Vertical: S04912 *JET 50, S04913 *JET 60, S04914 *JET 80, S04915 *JET 100 & S04916 *JET 150 POTABLE EXPANSION VESSELS (50, 60, 80, 100, 150 Litres) Vertical 10.0 Bar, 100°C, 1” BSP (M). S04917 *JET 200, S04918 *JET 300 & S04919 *JET 500 POTABLE EXPANSION VESSELS (200, 300 & 500 Litres) Vertical: 10.0 Bar, 100°C, 1 ¼” BSP (M). 597801 CENTER SHOCK ARRESTOR(162ml): 20.0 Bar, 100°C, ½” BSP (M). . 597802 CENTER DOMESTIC POTABLE EXPANSION VESSEL (2 Litres): 10.0 Bar, 100°C, ½” BSP (M). 597803 CENTER DOMESTIC POTABLE EXPANSION VESSEL (5 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597804 & 597805 CENTER DOMESTIC POTABLE EXPANSION VESSELS (8 & 12 Litres): 10.0 Bar, 100°C, ¾” BSP (M). 597806 & 597807 CENTER POTABLE EXPANSION VESSELS (18 & 24 Litres): 10.0 Bar, 100°C, 1” BSP (M).

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

CB Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211805

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

CB (CENTRE BRAND), size & W on body

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

635866 SR Backplate Elbow x 15mm X 1/2" 635899 SR Female Iron Adaptor Coupling x 15mm x 1/2" 635900 SR Female Iron Adaptor Coupling x 22mm x 3/4" 635901 SR Female Iron Tee x 15 x 15mm x 1/2" 635902 SR Female Iron Tee x 22 x 22mm x 1/2" 635903 SR Male Iron Adaptor Coupling x 15mm x 1/2" 635904 SR Male Iron Adaptor Coupling x 22mm x 3/4" 635905 SR Male Iron Adaptor Coupling x 28mm x 1" Models added June 2025: 636065 SR Female Iron Adaptor Coupling x 28mm x 1" 636066 SR Female Iron Adaptor Coupling x 35mm x 1.1/4" 636067 SR Male Iron Adaptor Coupling x 35mm x 1.1/4" 636068 SR Male Iron Adaptor Coupling x 42mm x 1.1/2" 636069 SR Male Iron Adaptor Coupling x 54mm x 2"

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The HLSRDPMFWT and HLSRDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208810

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

BOSS, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

75784558, 75784569, 75784580, 75784591, 75784610 & 75784621 Elbow 90 degree C X C: 8mm-54mm. 75784632, 75784643 & 75784654 Street Elbow 90 degree Ftg X C: 8mm-54mm. 75784676, 75784687, 75784698, 75784706, 75784717 & 75784728 Elbow 45 degree C X C: 8mm-54mm. 75784204, 75784215, 75784226, 75784237, 75784248 & 75784259 Straight Coupling with groove C X C: 8mm-54mm. 75784399, 75784407, 75784418,75784429,75784440, 75784451, 75784462, 75784473 75784484, 75784495, 75784503, 75784514, 75784525, 75784536 & 75784547 Fitting Reducer Ftg X C: 8mm-54mm. 75784739, 75784750, 75784761, 75784772, 75784783 & 75784794 Equal TEE CxCxC: 8mm-54mm. 75784802, 75784813, 75784824, 75784835, 75784846, 75784857, 75784868, 75784879, 75784890, 75784909, 75784920, 75784931, 75784942, 75784953, 75784964, 75784975, 75784986, 75784997, 75785003, 75785025 & 75785036 Reducing Tee CxCxC: 8mm-54mm. 75785047, 75785058, 75785069, 75785080, 75785091 & 75785110 Cap: 8mm-54mm. 75785143 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 75785121 & 75785132 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211808

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

BOSS, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

75784665 Wallplate: 15mm-22mm x ½”-¾” BSP (F). 75784333, 75784344, 75784355, 75784366 & 75784377 Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). 75784270, 75784281, 75784292, 75784300, 75784311, 75784322 & 75784388 Female Coupler: 15mm-54mm x ⅜”-2” BSP (F).

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The 32565811, 32565814, 32565802, 32565805 & 32565808-S/R models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208811

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

32524701, 32524705, 32524709, 32524713, 32524717, 32524721, 32524725, 32524729, 32524733 S/R Elbow 90 degree C X C 8mm-54mm 32533802, 32533805, 32533808 S/R Street Elbow 90 degree Ftg X C 8mm-54mm. 32539901, 32539905, 32539909, 32539913 & 32539917 S/R Elbow 45 degree C X C 8mm-54mm 32506201, 32506205 & 32506209 S/R Slip Straight Coupling C X C 8mm-54mm. 32500001, 32500005, 32500009, 32500013, 32500017, 32500021, 32500025, 32500029 & 32500033 S/R Coupling Straight Coupling with groove C X C 8mm-54mm. 32512401,32512405, 32512409, 32512413, 32512417, 32512421, 32512425, 32512429, 32512433, 32512437, 32512441, 32512445, 32512449, 32512453, 32512457, 32512461, 32512465 & 32512469 Fitting Reducer X C 8mm-54mm 32509303, 32509306, 32509309, 32509312, 32509315, 32509318, 32509321, 32503102, 32503105 & 32503108 Reducing Coupling C X C 8mm-54mm and ½”-1” 32551303, 32551306, 32551309, 32551312, 32551315, 32551318, 32551321, 32551324/ & 32551327 S/R Equal TEE CxCxC 8mm-54mm 32553401, 32553409, 32553417, 32553421/32553425, 32553413, 32553429, 32553433, 32553437, 32553441, 32553445, 32553449, 32553453, 32553457, 32553461, 32553465, 32553469, 32553473, 32553477, 32553481, 32553485, 32553489, 32553493, 32553497 S/R Reducing Tee CxCxC 8mm-54mm 32563901, 32563905, 32563909, 32563913, 32563917, 32563921, 32563925, 32563929 & 32563933-S/R Stop end 8mm-54mm 32567707 Partial Crossover Ftg x C 12mm-28mm 32567701 & 32567705 Full Crossover C x C 12mm-28mm 32569602/32569605-Str. Cyl Union-Bnt Cyl Union 22mm x 1” captive nut and 28mm x 1” captive nut 32565811 & 32565814 Bent Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut 32565802, 32565805 & 32565808 S/R Straight Nut Connect C x Fi 15mm x ½” captive nut 22mm x ¾” captive nut.

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). The HLSR20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211809

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

32549103 & 32549105 FI S/R Elbow 15mm-54mm x ¼”-2” BSP (F) 32546001 & 32546005 MI S/R Elbow 15mm-54mm x ¼”-2” BSP (M) 32542201 W /Plate Elbow 15mm-22mm x ½”-¾” BSP (F) 32518505, 32518508, 32518511& 32518514 MI S/R Connector 15mm-54mm x ⅜”-2” BSP (M) 32521601, 32521605 & 32521609 FI S/R Connector 15mm-54mm x ⅜”-2” BSP (F) 32542205 W Plate Straight 15mm-22mm x ¼”-¾” BSP (F) 32556001 & 32556005 FI Centre Tee 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F) 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Range of solder ring copper fittings for use with copper tube to EN 1057. The 304574, 304615 & 304711 and 304756 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208814

Size:

Solder ring: 8mm-54mm and ½” - 1” (see model). Threaded connections: 1” captive nut (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

110118, 111989 & 111990 Elbow 90 degree C X C 8mm-54mm 500132 & 111994Street Elbow 90 degree Ftg X C 8mm-54mm 111997 & 112000 Elbow 45 degree C X C 8mm-54mm 110034, 111940 & 111986 Straight Coupling with groove C X C 8mm-54mm 304382, 304416 & 112086 Fitting Reducer Ftg X C 8mm-54mm 304188, 111996 & 110260 Reducing Coupler C X C 8mm-54mm and ½”-1” 112003 & 112004Equal TEE CxCxC 8mm-54mm 112005, 304344 & 304347 Reducing Tee CxCxC 8mm-54mm 112391 & 112393Cap 8mm-54mm 304756 Bent Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut 304574, 304615 & 304711Straight Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207363

Size:

15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).

Marking:

GD press and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Pressfittings Coupling (SC): GDA5001: OD15, GDA5002: OD18, GDA5003: OD22, GDA5004: OD28, GDA5005: OD35, GDA5006: OD42, GDA5007: OD54, GDA5008: OD76.1, GDA5009: OD88.9, GDA5010: OD108. Long coupling (KC): GDA5011: OD15, GDA5012: OD18, GDA5013: OD22, GDA5014: OD28, GDA5015: OD35, GDA5016: OD42, GDA5017: OD54, GDA5018: OD76.1, GDA5019: OD88.9, GDA5020: OD108. Reducer (RC): GDA5021: OD18xOD15, GDA5022: OD22xOD15, GDA5023: OD22xOD18, GDA5024: OD28xOD15, GDA5025: OD28xOD18, GDA5026: OD28xOD22, GDA5048: OD35xOD15, GDA5027: OD35xOD18, GDA5029: OD35xOD22, GDA5030: OD35xOD28, GDA5031: OD42xOD15, GDA5032: OD42xOD18, GDA5033: OD42xOD22, GDA5034: OD42xOD28, GDA5035: OD42xOD35, GDA5036: OD54xOD15, GDA5037: OD54xOD18, GDA5038: OD54xOD22, GDA5039: OD54xOD28, GDA5040: OD54xOD35, GDA5041: OD54xOD42, GDA5042: OD76.1xOD54, GDA5043: OD88.9xOD54, GDA5044: OD88.9xOD76.1, GDA5045: OD108xOD54, GDA5046: OD108xOD76.1, GDA5047: OD108xOD88.9. Pressfittings 90° Elbow F/F r=1.2 (90E(A)): GDA6051: OD15 (R=1.2), GDA6052: OD18 (R=1.2), GDA6053: OD22 (R=1.2), GDA6054: OD28 (R=1.2), GDA6055: OD35 (R=1.2), GDA6056: OD42 (R=1.2), GDA6057: OD54 (R=1.2), GDA6058: OD76.1 (R=1.2), GDA6059: OD88.9 (R=1.2), GDA6060: OD108 (R=1.2). Pressfittings 90° Elbow Extension Coupling r=1.2 (90E(B)): GDA6071: OD15 (R=1.2), GDA6072: OD18 (R=1.2), GDA6073: OD22 (R=1.2), GDA6074: OD28 (R=1.2), GDA6075: OD35 (R=1.2), GDA6076: OD42 (R=1.2), GDA6077: OD54 (R=1.2), GDA6078: OD76.1 (R=1.2), GDA6079: OD88.9 (R=1.2), GDA6080: OD108 (R=1.2). Pressfittings 45° Elbow F/F r=1.2 (45E(A)): GDA6101: OD15 (R=1.2), GDA6102: OD18 (R=1.2), GDA6103: OD22 (R=1.2), GDA6104: OD28 (R=1.2), GDA6105: OD35 (R=1.2), GDA6106: OD42 (R=1.2), GDA6107: OD54 (R=1.2), GDA6108: OD76.1 (R=1.2), GDA6109: OD88.9 (R=1.2), GDA6110: OD108 (R=1.2). Pressfittings 45° Elbow Extension Coupling r=1.2 (45E(B)): GDA6121: OD15 (R=1.2), GDA6122: OD18 (R=1.2), GDA6123: OD22 (R=1.2), GDA6124: OD28 (R=1.2), GDA6125: OD35 (R=1.2), GDA6126: OD42 (R=1.2), GDA6127: OD54 (R=1.2), GDA6128: OD76.1 (R=1.2), GDA6129: OD88.9 (R=1.2), GDA6130: OD108 (R=1.2). 90° Elbow with plain ends (90P): GDA5501: OD15, GDA5502: OD18, GDA5503: OD22, GDA5504: OD28, GDA5505: OD35, GDA5506: OD42, GDA5507: OD54, GDA5508: OD76.1, GDA5509: OD88.9, GDA5510: OD108. 75° Elbow with Plain Ends (75P): GDA5511: OD15, GDA5512: OD18, GDA5513: OD22, GDA5514: OD28, GDA5515: OD35, GDA5516: OD42, GDA5517: OD54, GDA5518: OD76.1, GDA5519: OD88.9, GDA5520: OD108. 60° Elbow with Plain Ends (60P): GDA5521: OD15, GDA5522: OD18, GDA5523: OD22, GDA5524: OD28, GDA5525: OD35, GDA5526: OD42, GDA5527: OD54, GDA5528: OD76.1, GDA5529: OD88.9, GDA5530: OD108. 45° Elbow with Plain Ends (45P): GDA5531: OD15, GDA5532: OD18, GDA5533: OD22, GDA5534: OD28, GDA5535: OD35, GDA5536: OD42, GDA5537: OD54, GDA5538: OD76.1, GDA5539: OD88.9, GDA5540: OD108. 30° Elbow with Plain Ends (30P): GDA5541: OD15, GDA5542: OD18, GDA5543: OD22, GDA5544: OD28, GDA5545: OD35, GDA5546: OD42, GDA5547: OD54, GDA5548: OD76.1, GDA5549: OD88.9, GDA5550: OD108. 15° Elbow with Plain Ends (15P): GDA5551: OD15, GDA5552: OD18, GDA5553: OD22, GDA5554: OD28, GDA5555: OD35, GDA5556: OD42, GDA5557: OD54, GDA5558: OD76.1, GDA5559: OD88.9, GDA5560: OD108. Pressfittings Bridge (B): GDA5171: OD15, GDA5172: OD18, GDA5173: OD22, GDA5174: OD28. Pressfittings Long Bridge (LB): GDA5176: OD15, GDA5177: OD18, GDA5178: OD22, GDA5179: OD28. Pressfittings Tee (T(S)): GDA5181: OD15, GDA5182: OD18, GDA5183: OD22, GDA5184: OD28, GDA5185: OD35, GDA5186: OD42, GDA5187: OD54, GDA5188: OD76.1, GDA5189: OD88.9, GDA5190: OD108. Pressfittings Reducer Tee Coupling (T(R)): GDA5191: OD18xOD15, GDA5192: OD22xOD15, GDA5193: OD22xOD18, GDA5194: OD28xOD15, GDA5195: OD28xOD18, GDA5196: OD28xOD22, GDA5197: OD35xOD15, GDA5198: OD35xOD18, GDA5199: OD35xOD22, GDA5200: OD35xOD28, GDA5201: OD42xOD15, GDA5202: OD42xOD18, GDA5203: OD42xOD22, GDA5204: OD42xOD28, GDA5205: OD42xOD35, GDA5206: OD54xOD15, GDA5207: OD54xOD18, GDA5208: OD54xOD22, GDA5209: OD54xOD28, GDA5210: OD54xOD35, GDA5211: OD54xOD42, GDA5212: OD76.1xOD22, GDA5213: OD76.1xOD28, GDA5214: OD76.1xOD35, GDA5215: OD76.1xOD42, GDA5216: OD76.1xOD54, GDA5217: OD88.9xOD22, GDA5218: OD88.9xOD28, GDA5219: OD88.9xOD35, GDA5220: OD88.9xOD42, GDA5221: OD88.9xOD54, GDA5222: OD88.9xOD76.1, GDA5223: OD108xOD22, GDA5224: OD108xOD28, GDA5225: OD108xOD35, GDA5226: OD108xOD42, GDA5227: OD108xOD54, GDA5228: OD108xOD76.1, GDA5229: OD108xOD88.9. Pressfittings Tee Male (ETCT): GDA5231: OD15xR1/2, GDA5232: OD18xR1/2, GDA5239: OD22xR1/2, GDA5233: OD22xR3/4, GDA5234: OD22xR1, GDA5240: OD28xR1/2, GDA5235: OD28xR1, GDA5281: OD35xR3/4, GDA5236: OD35xR1 1/4, GDA5237: OD42xR1 1/2, GDA5238: OD54xR2. Pressfittings Tee Female (ITCT): GDA5241: OD15xRp1/2, GDA5242: OD18xRp1/2, GDA5243: OD18xRp3/4, GDA5244: OD22xRp1/2, GDA5245: OD22xRp3/4, GDA5246: OD28xRp1/2, GDA5247: OD28xRp3/4, GDA5248: OD28xRp1, GDA5249: OD35xRp1/2, GDA5250: OD35xRp3/4, GDA5262: OD35xRp1, GDA5263: OD35xRp1 1/4, GDA5251: OD42xRp1/2, GDA5252: OD42xRp3/4, GDA5264: OD42xRp1, GDA5265: OD42xRp1 1/2, GDA5253: OD54xRp1/2, GDA5254: OD54xRp3/4, GDA5266: OD54xRp1, GDA5255: OD54xRp2, GDA5256: OD76.1xRp3/4, GDA5257: OD76.1xRp2, GDA5258: OD88.9xRp3/4, GDA5259: OD88.9xRp2, GDA5260: OD08xRp3/4, GDA5261: OD08xRp2. Pressfittings 90° Elbow male coupling (ETC90E): GDA5271: OD15xR1/2, GDA5272: OD18xR1/2, GDA5273: OD22xR3/4, GDA5274: OD28xR1, GDA5275: OD35xR1 1/4, GDA5276: OD42xR1 1/2, GDA5277: OD54xR2. Pressfittings 90° Elbow female coupling (ITC90E): GDA5291: OD15xRp1/2, GDA5292: OD18xRp1/2, GDA5293: OD22xRp3/4, GDA5294: OD28xRp1, GDA5295: OD35xRp1 ¼. Pressfittings 90° Elbow male thread (ETC90E1): GDA6271: OD15xR1/2, GDA6272: OD18xR1/2, GDA6273: OD22xR3/4, GDA6274: OD28xR1, GDA6275: OD35xR1 1/4, GDA6276: OD42xR1 1/2, GDA6277: OD54xR2. Pressfittings 90° Elbow female thread (ITC90E1): GDA6291: OD15xRp1/2, GDA6292: OD18xRp1/2, GDA6293: OD22xRp3/4, GDA6294: OD28xRp1, GDA6295: OD35xRp1 ¼. Pressfittings 90° Elbow female adadpter coupling (ITC90E3): GDA5321: OD15xRp1/2, GDA5322: OD18xRp1/2, GDA5323: OD22xRp3/4. Pressfittings 90° Elbow female adadpter long coupling (ITC90E4): GDA5326: OD15xRp1/2, GDA5327: OD18xRp1/2, GDA5328: OD22xRp3/4. Pressfittings Adapter Female Coupling (captive nut) (ZL): GDA5341: OD15xG1/2, GDA5353: OD15xG3/4, GDA5342: OD18xG1/2, GDA5343: OD18xG3/4, GDA5345: OD22xG1, GDA5347: OD28xG1, GDA5348: OD28xG1 1/4, GDA5350: OD35xG1 1/2, GDA5351: OD42xG1 3/4, GDA5352: OD54xG2 3/8. Pressfittings Male coupling (ETC): GDA5361: OD15xR1/2, GDA5362: OD15xR3/4, GDA5363: OD18xR1/2, GDA5364: OD18xR3/4, GDA5365: OD22xR1/2, GDA5366: OD22xR3/4, GDA5367: OD22xR1, GDA5368: OD28xR3/4, GDA5369: OD28xR1, GDA5370: OD28xR1 1/4, GDA5371: OD35xR1, GDA5372: OD35xR1 1/4, GDA5373: OD35xR1 1/2, GDA5374: OD42xR1 1/4, GDA5375: OD42xR1 1/2, GDA5376: OD54xR1 1/2, GDA5377: OD54xR2, GDA5378: OD76.1xR2 1/2, GDA5379: OD88.9xR3, GDA5380: OD108xR4. Pressfittings Female coupling (ITC): GDA5381: OD15xRp1/2, GDA5382: OD15xRp3/4, GDA5383: OD18xRp1/2, GDA5384: OD18xRp3/4, GDA5385: OD22xRp1/2, GDA5386: OD22xRp3/4, GDA5387: OD22xRp1, GDA5388: OD28xRp3/4, GDA5389: OD28xRp1, GDA5390: OD28xRp1 1/4, GDA5391: OD35xRp1, GDA5392: OD35xRp1 1/4, GDA5393: OD35xRp1 1/2, GDA5394: OD42xRp1 1/4, GDA5395: OD42xRp1 1/2, GDA5396: OD54xRp1 1/2, GDA5397: OD54xRp2, GDA5398: OD76.1xRp2 1/2, GDA5399: OD88.9xRp3, GDA5400: OD108xRp4. Pressfittings male straight connector (ETE): GDA6361: OD15xR1/2, GDA6362: OD18xR1/2, GDA6363: OD18xR3/4, GDA6364: OD22xR1/2, GDA6365: OD22xR3/4, GDA6366: OD22xR1, GDA6367: OD28xR3/4, GDA6368: OD28xR1, GDA6369: OD28xR1 1/4, GDA6370: OD35xR1 1/4, GDA6371: OD42xR1 1/2, GDA6372: OD54xR2. Pressfittings female straight connector (ITE): GDA6381: OD15xRp1/2, GDA6382: OD18xRp1/2, GDA6383: OD18xRp3/4, GDA6384: OD22xRp1/2, GDA6385: OD22xRp3/4, GDA6386: OD28xR3/4, GDA6387: OD28xR1, GDA6388: OD35xR1 1/4, GDA6389: OD42xR1 1/2, GDA6390: OD54xR2. Pressfittings Cap (CAP): GDA5421: OD15, GDA5422: OD18, GDA5423: OD22, GDA5424: OD28, GDA5425: OD35, GDA5426: OD42, GDA5427: OD54, GDA5428: OD76.1, GDA5429: OD88.9, GDA5430: OD108. Pressfittings Union male coupling (ETCZ): GDA5431: OD15xR1/2, GDA5432: OD15xR3/4, GDA5433: OD18xR1/2, GDA5434: OD18xR3/4, GDA5435: OD22xR1/2, GDA5436: OD22xR3/4, GDA5437: OD22xR1, GDA5438: OD28xR1, GDA5439: OD35xR1 1/4, GDA5440: OD42xR1 1/2, GDA5441: OD54xR2. Pressfittings Union female coupling (ITCZ): GDA5451: OD15xRp1/2, GDA5452: OD15xRp3/4, GDA5453: OD18xRp1/2, GDA5454: OD18xRp3/4, GDA5455: OD22xRp3/4, GDA5456: OD22xRp1, GDA5457: OD28xRp1, GDA5458: OD35xRp1 1/4, GDA5459: OD42xRp1 1/2, GDA5460: OD54xRp2. Pressfittings Union coupling (ADAPTATER UNION): GDA5471: OD15, GDA5472: OD18, GDA5473: OD22, GDA5474: OD28, GDA5475: OD35, GDA5476: OD42, GDA5477: OD54.

Approval Holder:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

Manufacturer:

Grande-tek Flow Control Co., Ltd

Company Name

Grande-tek Flow Control Co., Ltd

Address

Industrial Zone of Yunhe District, Fuyang Road, Cangzhou, Hebei

Postcode

061000

Country

China

View All Listings by this Company

Range of stainless steel (SS316L) pressfit fittings with EPDM ‘O’-rings for use with stainless steel pipe (manufactured to EN10312). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207367

Size:

15-108mm. ½” BSP (M) or (F) - 4” BSP (M) or (F) (see model - some incorporate a captive nut).

Marking:

MTF and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Pressfittings Coupling (SC): GDA5001: OD15, GDA5002: OD18, GDA5003: OD22, GDA5004: OD28, GDA5005: OD35, GDA5006: OD42, GDA5007: OD54, GDA5008: OD76.1, GDA5009: OD88.9, GDA5010: OD108. Long coupling (KC): GDA5011: OD15, GDA5012: OD18, GDA5013: OD22, GDA5014: OD28, GDA5015: OD35, GDA5016: OD42, GDA5017: OD54, GDA5018: OD76.1, GDA5019: OD88.9, GDA5020: OD108. Reducer (RC): GDA5021: OD18xOD15, GDA5022: OD22xOD15, GDA5023: OD22xOD18, GDA5024: OD28xOD15, GDA5025: OD28xOD18, GDA5026: OD28xOD22, GDA5048: OD35xOD15, GDA5027: OD35xOD18, GDA5029: OD35xOD22, GDA5030: OD35xOD28, GDA5031: OD42xOD15, GDA5032: OD42xOD18, GDA5033: OD42xOD22, GDA5034: OD42xOD28, GDA5035: OD42xOD35, GDA5036: OD54xOD15, GDA5037: OD54xOD18, GDA5038: OD54xOD22, GDA5039: OD54xOD28, GDA5040: OD54xOD35, GDA5041: OD54xOD42, GDA5042: OD76.1xOD54, GDA5043: OD88.9xOD54, GDA5044: OD88.9xOD76.1, GDA5045: OD108xOD54, GDA5046: OD108xOD76.1, GDA5047: OD108xOD88.9. Pressfittings 90° Elbow F/F r=1.2 (90E(A)): GDA6051: OD15 (R=1.2), GDA6052: OD18 (R=1.2), GDA6053: OD22 (R=1.2), GDA6054: OD28 (R=1.2), GDA6055: OD35 (R=1.2), GDA6056: OD42 (R=1.2), GDA6057: OD54 (R=1.2), GDA6058: OD76.1 (R=1.2), GDA6059: OD88.9 (R=1.2), GDA6060: OD108 (R=1.2). Pressfittings 90° Elbow Extension Coupling r=1.2 (90E(B)): GDA6071: OD15 (R=1.2), GDA6072: OD18 (R=1.2), GDA6073: OD22 (R=1.2), GDA6074: OD28 (R=1.2), GDA6075: OD35 (R=1.2), GDA6076: OD42 (R=1.2), GDA6077: OD54 (R=1.2), GDA6078: OD76.1 (R=1.2), GDA6079: OD88.9 (R=1.2), GDA6080: OD108 (R=1.2). Pressfittings 45° Elbow F/F r=1.2 (45E(A)): GDA6101: OD15 (R=1.2), GDA6102: OD18 (R=1.2), GDA6103: OD22 (R=1.2), GDA6104: OD28 (R=1.2), GDA6105: OD35 (R=1.2), GDA6106: OD42 (R=1.2), GDA6107: OD54 (R=1.2), GDA6108: OD76.1 (R=1.2), GDA6109: OD88.9 (R=1.2), GDA6110: OD108 (R=1.2). Pressfittings 45° Elbow Extension Coupling r=1.2 (45E(B)): GDA6121: OD15 (R=1.2), GDA6122: OD18 (R=1.2), GDA6123: OD22 (R=1.2), GDA6124: OD28 (R=1.2), GDA6125: OD35 (R=1.2), GDA6126: OD42 (R=1.2), GDA6127: OD54 (R=1.2), GDA6128: OD76.1 (R=1.2), GDA6129: OD88.9 (R=1.2), GDA6130: OD108 (R=1.2). 90° Elbow with plain ends (90P): GDA5501: OD15, GDA5502: OD18, GDA5503: OD22, GDA5504: OD28, GDA5505: OD35, GDA5506: OD42, GDA5507: OD54, GDA5508: OD76.1, GDA5509: OD88.9, GDA5510: OD108. 75° Elbow with Plain Ends (75P): GDA5511: OD15, GDA5512: OD18, GDA5513: OD22, GDA5514: OD28, GDA5515: OD35, GDA5516: OD42, GDA5517: OD54, GDA5518: OD76.1, GDA5519: OD88.9, GDA5520: OD108. 60° Elbow with Plain Ends (60P): GDA5521: OD15, GDA5522: OD18, GDA5523: OD22, GDA5524: OD28, GDA5525: OD35, GDA5526: OD42, GDA5527: OD54, GDA5528: OD76.1, GDA5529: OD88.9, GDA5530: OD108. 45° Elbow with Plain Ends (45P): GDA5531: OD15, GDA5532: OD18, GDA5533: OD22, GDA5534: OD28, GDA5535: OD35, GDA5536: OD42, GDA5537: OD54, GDA5538: OD76.1, GDA5539: OD88.9, GDA5540: OD108. 30° Elbow with Plain Ends (30P): GDA5541: OD15, GDA5542: OD18, GDA5543: OD22, GDA5544: OD28, GDA5545: OD35, GDA5546: OD42, GDA5547: OD54, GDA5548: OD76.1, GDA5549: OD88.9, GDA5550: OD108. 15° Elbow with Plain Ends (15P): GDA5551: OD15, GDA5552: OD18, GDA5553: OD22, GDA5554: OD28, GDA5555: OD35, GDA5556: OD42, GDA5557: OD54, GDA5558: OD76.1, GDA5559: OD88.9, GDA5560: OD108. Pressfittings Bridge (B): GDA5171: OD15, GDA5172: OD18, GDA5173: OD22, GDA5174: OD28. Pressfittings Long Bridge (LB): GDA5176: OD15, GDA5177: OD18, GDA5178: OD22, GDA5179: OD28. Pressfittings Tee (T(S)): GDA5181: OD15, GDA5182: OD18, GDA5183: OD22, GDA5184: OD28, GDA5185: OD35, GDA5186: OD42, GDA5187: OD54, GDA5188: OD76.1, GDA5189: OD88.9, GDA5190: OD108. Pressfittings Reducer Tee Coupling (T(R)): GDA5191: OD18xOD15, GDA5192: OD22xOD15, GDA5193: OD22xOD18, GDA5194: OD28xOD15, GDA5195: OD28xOD18, GDA5196: OD28xOD22, GDA5197: OD35xOD15, GDA5198: OD35xOD18, GDA5199: OD35xOD22, GDA5200: OD35xOD28, GDA5201: OD42xOD15, GDA5202: OD42xOD18, GDA5203: OD42xOD22, GDA5204: OD42xOD28, GDA5205: OD42xOD35, GDA5206: OD54xOD15, GDA5207: OD54xOD18, GDA5208: OD54xOD22, GDA5209: OD54xOD28, GDA5210: OD54xOD35, GDA5211: OD54xOD42, GDA5212: OD76.1xOD22, GDA5213: OD76.1xOD28, GDA5214: OD76.1xOD35, GDA5215: OD76.1xOD42, GDA5216: OD76.1xOD54, GDA5217: OD88.9xOD22, GDA5218: OD88.9xOD28, GDA5219: OD88.9xOD35, GDA5220: OD88.9xOD42, GDA5221: OD88.9xOD54, GDA5222: OD88.9xOD76.1, GDA5223: OD108xOD22, GDA5224: OD108xOD28, GDA5225: OD108xOD35, GDA5226: OD108xOD42, GDA5227: OD108xOD54, GDA5228: OD108xOD76.1, GDA5229: OD108xOD88.9. Pressfittings Tee Male (ETCT): GDA5231: OD15xR1/2, GDA5232: OD18xR1/2, GDA5239: OD22xR1/2, GDA5233: OD22xR3/4, GDA5234: OD22xR1, GDA5240: OD28xR1/2, GDA5235: OD28xR1, GDA5281: OD35xR3/4, GDA5236: OD35xR1 1/4, GDA5237: OD42xR1 1/2, GDA5238: OD54xR2. Pressfittings Tee Female (ITCT): GDA5241: OD15xRp1/2, GDA5242: OD18xRp1/2, GDA5243: OD18xRp3/4, GDA5244: OD22xRp1/2, GDA5245: OD22xRp3/4, GDA5246: OD28xRp1/2, GDA5247: OD28xRp3/4, GDA5248: OD28xRp1, GDA5249: OD35xRp1/2, GDA5250: OD35xRp3/4, GDA5262: OD35xRp1, GDA5263: OD35xRp1 1/4, GDA5251: OD42xRp1/2, GDA5252: OD42xRp3/4, GDA5264: OD42xRp1, GDA5265: OD42xRp1 1/2, GDA5253: OD54xRp1/2, GDA5254: OD54xRp3/4, GDA5266: OD54xRp1, GDA5255: OD54xRp2, GDA5256: OD76.1xRp3/4, GDA5257: OD76.1xRp2, GDA5258: OD88.9xRp3/4, GDA5259: OD88.9xRp2, GDA5260: OD08xRp3/4, GDA5261: OD08xRp2. Pressfittings 90° Elbow male coupling (ETC90E): GDA5271: OD15xR1/2, GDA5272: OD18xR1/2, GDA5273: OD22xR3/4, GDA5274: OD28xR1, GDA5275: OD35xR1 1/4, GDA5276: OD42xR1 1/2, GDA5277: OD54xR2. Pressfittings 90° Elbow female coupling (ITC90E): GDA5291: OD15xRp1/2, GDA5292: OD18xRp1/2, GDA5293: OD22xRp3/4, GDA5294: OD28xRp1, GDA5295: OD35xRp1 ¼. Pressfittings 90° Elbow male thread (ETC90E1): GDA6271: OD15xR1/2, GDA6272: OD18xR1/2, GDA6273: OD22xR3/4, GDA6274: OD28xR1, GDA6275: OD35xR1 1/4, GDA6276: OD42xR1 1/2, GDA6277: OD54xR2. Pressfittings 90° Elbow female thread (ITC90E1): GDA6291: OD15xRp1/2, GDA6292: OD18xRp1/2, GDA6293: OD22xRp3/4, GDA6294: OD28xRp1, GDA6295: OD35xRp1 ¼. Pressfittings 90° Elbow female adadpter coupling (ITC90E3): GDA5321: OD15xRp1/2, GDA5322: OD18xRp1/2, GDA5323: OD22xRp3/4. Pressfittings 90° Elbow female adadpter long coupling (ITC90E4): GDA5326: OD15xRp1/2, GDA5327: OD18xRp1/2, GDA5328: OD22xRp3/4. Pressfittings Adapter Female Coupling (captive nut) (ZL): GDA5341: OD15xG1/2, GDA5353: OD15xG3/4, GDA5342: OD18xG1/2, GDA5343: OD18xG3/4, GDA5345: OD22xG1, GDA5347: OD28xG1, GDA5348: OD28xG1 1/4, GDA5350: OD35xG1 1/2, GDA5351: OD42xG1 3/4, GDA5352: OD54xG2 3/8. Pressfittings Male coupling (ETC): GDA5361: OD15xR1/2, GDA5362: OD15xR3/4, GDA5363: OD18xR1/2, GDA5364: OD18xR3/4, GDA5365: OD22xR1/2, GDA5366: OD22xR3/4, GDA5367: OD22xR1, GDA5368: OD28xR3/4, GDA5369: OD28xR1, GDA5370: OD28xR1 1/4, GDA5371: OD35xR1, GDA5372: OD35xR1 1/4, GDA5373: OD35xR1 1/2, GDA5374: OD42xR1 1/4, GDA5375: OD42xR1 1/2, GDA5376: OD54xR1 1/2, GDA5377: OD54xR2, GDA5378: OD76.1xR2 1/2, GDA5379: OD88.9xR3, GDA5380: OD108xR4. Pressfittings Female coupling (ITC): GDA5381: OD15xRp1/2, GDA5382: OD15xRp3/4, GDA5383: OD18xRp1/2, GDA5384: OD18xRp3/4, GDA5385: OD22xRp1/2, GDA5386: OD22xRp3/4, GDA5387: OD22xRp1, GDA5388: OD28xRp3/4, GDA5389: OD28xRp1, GDA5390: OD28xRp1 1/4, GDA5391: OD35xRp1, GDA5392: OD35xRp1 1/4, GDA5393: OD35xRp1 1/2, GDA5394: OD42xRp1 1/4, GDA5395: OD42xRp1 1/2, GDA5396: OD54xRp1 1/2, GDA5397: OD54xRp2, GDA5398: OD76.1xRp2 1/2, GDA5399: OD88.9xRp3, GDA5400: OD108xRp4. Pressfittings male straight connector (ETE): GDA6361: OD15xR1/2, GDA6362: OD18xR1/2, GDA6363: OD18xR3/4, GDA6364: OD22xR1/2, GDA6365: OD22xR3/4, GDA6366: OD22xR1, GDA6367: OD28xR3/4, GDA6368: OD28xR1, GDA6369: OD28xR1 1/4, GDA6370: OD35xR1 1/4, GDA6371: OD42xR1 1/2, GDA6372: OD54xR2. Pressfittings female straight connector (ITE): GDA6381: OD15xRp1/2, GDA6382: OD18xRp1/2, GDA6383: OD18xRp3/4, GDA6384: OD22xRp1/2, GDA6385: OD22xRp3/4, GDA6386: OD28xR3/4, GDA6387: OD28xR1, GDA6388: OD35xR1 1/4, GDA6389: OD42xR1 1/2, GDA6390: OD54xR2. Pressfittings Cap (CAP): GDA5421: OD15, GDA5422: OD18, GDA5423: OD22, GDA5424: OD28, GDA5425: OD35, GDA5426: OD42, GDA5427: OD54, GDA5428: OD76.1, GDA5429: OD88.9, GDA5430: OD108. Pressfittings Union male coupling (ETCZ): GDA5431: OD15xR1/2, GDA5432: OD15xR3/4, GDA5433: OD18xR1/2, GDA5434: OD18xR3/4, GDA5435: OD22xR1/2, GDA5436: OD22xR3/4, GDA5437: OD22xR1, GDA5438: OD28xR1, GDA5439: OD35xR1 1/4, GDA5440: OD42xR1 1/2, GDA5441: OD54xR2. Pressfittings Union female coupling (ITCZ): GDA5451: OD15xRp1/2, GDA5452: OD15xRp3/4, GDA5453: OD18xRp1/2, GDA5454: OD18xRp3/4, GDA5455: OD22xRp3/4, GDA5456: OD22xRp1, GDA5457: OD28xRp1, GDA5458: OD35xRp1 1/4, GDA5459: OD42xRp1 1/2, GDA5460: OD54xRp2. Pressfittings Union coupling (ADAPTATER UNION): GDA5471: OD15, GDA5472: OD18, GDA5473: OD22, GDA5474: OD28, GDA5475: OD35, GDA5476: OD42, GDA5477: OD54.

Approval Holder:

Marla Tube Fittings Limited

Company Name

Marla Tube Fittings Limited

Address

Kinwarton Farm Road Alcester

Postcode

B49 6EH

Country

United Kingdom

Phone

01789 761207

General Email

graham.walker@marla.co.uk

View All Listings by this Company

STH Ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). 74232, 74233, 74234, 74226, 74227, 74228, 74229 & 74231 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109064

Size:

See model

Marking:

STH and size on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

74215 15X1/2" CXMI COUPLING PRESS WATER 74216 15X3/4" CXMI COUPLING PRESS WATER 74217 22X1/2" CXMI COUPLING PRESS WATER 74218 22X3/4" CXMI COUPLING PRESS WATER 74219 22X1" CXMI COUPLING PRESS WATER 74220 28X3/4" CXMI COUPLING PRESS WATER 74221 28X1" CXMI COUPLING PRESS WATER 74222 35X1" CXMI COUPLING PRESS WATER 74223 35X11/4" CXMI COUPLING PRESS WATER 74224 42X11/2" CXMI COUPLING PRESS WATER 74225 54X2" CXMI COUPLING PRESS WATER 74204 15X1/2" CXFI COUPLING PRESS WATER 74205 15X3/4" CXFI COUPLING PRESS WATER 74206 22X1/2" CXFI COUPLING PRESS WATER 74207 22X3/4" CXFI COUPLING PRESS WATER 74208 22X1" CXFI COUPLING PRESS WATER 74209 28X3/4" CXFI COUPLING PRESS WATER 74210 28X1" CXFI COUPLING PRESS WATER 74211 35X1" CXFI COUPLING PRESS WATER 74212 35X11/4" CXFI COUPLING PRESS WATER 74213 42X11/2" CXFI COUPLING PRESS WATER 74214 54X2" CXFI COUPLING PRESS WATER 74238 15X1/2" CXMI 90D ELBOW PRESS WATER 74239 22X3/4" CXMI 90D ELBOW PRESS WATER 74240 28X1" CXMI 90D ELBOW PRESS WATER 74235 15X1/2" CXFI 90D ELBOW PRESS WATER 74236 22X3/4" CXFI 90D ELBOW PRESS WATER 74237 28X1" CXFI 90D ELBOW PRESS WATER 74241 15X1/2" WALLPLATE ELBOW PRESS WATER 74242 15X15X1/2" CXCXFI TEE PRESS WATER 74243 22X22X1/2" CXCXFI TEE PRESS WATER 74244 22X22X34" CXCXFI TEE PRESS WATER 74245 28X28X1/2" CXCXFI TEE PRESS WATER 74246 28X28X3/4" CXCXFI TEE PRESS WATER 74248 35X35X1/2" CXCXFI TEE PRESS WATER 74252 42X42X1/2" CXCXFI TEE PRESS WATER 74256 54X54X1/2" CXCXFI TEE PRESS WATER 74232 15X1/2" CXMI UNION COUP PRESS WATER 74233 22X3/4" CXMI UNION COUP PRESS WATER 74234 28X1" CXMI UNION COUP PRESS WATER 74226 15X1/2" CXFI SWIVEL COUP PRESS WATER 74227 15X3/4" CXFI SWIVEL COUP PRESS WATER 74228 22X3/4" CXFI SWIVEL COUP PRESS WATER 74229 22X1" CXFI SWIVEL COUP PRESS WATER 74231 28X11/4 CXFI SWIVEL COUP PRESS WATER

Approval Holder:

Standard Hidráulica, S.A.U

Company Name

Standard Hidráulica, S.A.U

Address

Avenida de la Ferreria 73 Montcada i Reixac

Postcode

08110

Country

Spain

General Email

Jorge.casado@sth.email

View All Listings by this Company

CB (CENTRE) Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208806

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CB, W & size on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

635690 EF Straight Coupler x 8mm 635691 EF Straight Coupler x 10mm 635692 EF Straight Coupler x 15mm 635693 EF Straight Coupler x 22mm 635694 EF Straight Coupler x 28mm 635695 EF Straight Coupler x 35mm 635696 EF Straight Coupler x 42mm 635697 EF Straight Coupler x 54mm 635698 EF Slip Coupling x 15mm 635699 EF Slip Coupling x 22mm 635700 EF Stop End x 8mm 635701 EF Stop End x 10mm 635702 EF Stop End x 15mm 635703 EF Stop End x 22mm 635704 EF Stop End x 28mm 635705 EF Stop End x 35mm 635706 EF Stop End x 42mm 635707 EF Stop End x 54mm 635708 EF Reducing Coupling x 15mm x 10mm 635709 EF Reducing Coupling x 22mm x 15mm 635710 EF Reducer x 10mm x 8mm 635711 EF Reducer x 15mm x 8mm 635712 EF Reducer x 15mm x 10mm 635713 EF Reducer x 22mm x 15mm 635714 EF Reducer x 28mm x 15mm 635715 EF Reducer x 28mm x 22mm 635716 EF Reducer x 35mm x 15mm 635717 EF Reducer x 35mm x 22mm 635718 EF Reducer x 35mm x 28mm 635719 EF Reducer x 42mm x 15mm 635720 EF Reducer x 42mm x 22mm 635721 EF Reducer x 42mm x 28mm 635722 EF Reducer x 42mm x 35mm 635723 EF Reducer x 54mm x 15mm 635724 EF Reducer x 54mm x 22mm 635725 EF Reducer x 54mm x 28mm 635726 EF Reducer x 54mm x 35mm 635727 EF Reducer x 54mm x 42mm 635728 EF Imperial to Metric Coupling x 15mm x 1/2" 635729 EF Imperial to Metric Coupling x 22mm x 3/4" 635730 EF Imperial to Metric Coupling x 28mm x 1" 635731 EF Elbow 90 Degree x 8mm 635732 EF Elbow 90 Degree x 10mm 635733 EF Elbow 90 Degree x 15mm 635734 EF Elbow 90 Degree x 22mm 635735 EF Elbow 90 Degree x 28mm 635736 EF Elbow 90 Degree x 35mm 635737 EF Elbow 90 Degree x 42mm 635738 EF Elbow 90 Degree x 54mm 635739 EF Elbow 45 Degree x 15mm 635740 EF Elbow 45 Degree x 22mm 635741 EF Elbow 45 Degree x 28mm 635742 EF Elbow 45 Degree x 35mm 635743 EF Elbow 45 Degree x 42mm 635744 EF Elbow 45 Degree x 54mm 635745 EF Street Elbow 90 Degree x 15mm 635746 EF Street Elbow 90 Degree x 22mm 635747 EF Street Elbow 90 Degree x 28mm 635748 EF Street Elbow 90 Degree x 35mm 635749 EF Street Elbow 90 Degree x 42mm 635750 EF Street Elbow 90 Degree x 54mm 635751 EF Street Elbow 45 Degree x 15mm 635752 EF Street Elbow 45 Degree x 22mm 635753 EF Street Elbow 45 Degree x 28mm 635754 EF Street Elbow 45 Degree x 35mm 635755 EF Street Elbow 45 Degree x 42mm 635756 EF Street Elbow 45 Degree x 54mm 635758 EF Equal Tee x 10mm 635759 EF Equal Tee x 15mm 635760 EF Equal Tee x 22mm 635761 EF Equal Tee x 28mm 635762 EF Equal Tee x 35mm 635763 EF Equal Tee x 42mm 635764 EF Equal Tee x 54mm 635765 EF Reducing Tee x 22 x 22 x 15mm 635766 EF Reducing Tee x 28 x 28 x 15mm 635767 EF Reducing Tee x 28 x 28 x 22mm 635768 EF Reducing Tee x 35 x 35 x 15mm 635769 EF Reducing Tee x 35 x 35 x 22mm 635770 EF Reducing Tee x 35 x 35 x 28mm 635771 EF Reducing Tee x 42 x 42 x 15mm 635772 EF Reducing Tee x 42 x 42 x 22mm 635773 EF Reducing Tee x 42 x 42 x 28mm 635774 EF Reducing Tee x 42 x 42 x 35mm 635775 EF Reducing Tee x 54 x 54 x 15mm 635776 EF Reducing Tee x 54 x 54 x 22mm 635777 EF Reducing Tee x 54 x 54 x 28mm 635778 EF Reducing Tee x 54 x 54 x 35mm 635779 EF Reducing Tee x 54 x 54 x 42mm 635780 EF Reducing Tee - One End Only x 22 x 15 x 22mm 635781 EF Reducing Tee - One End Only x 28 x 15 x 28mm 635782 EF Reducing Tee - One End Only x 28 x 22 x 28mm 635783 EF Reducing Tee - One End and Branch x 22 x 15 x 15mm 635784 EF Reducing Tee - One End and Branch x 28 x 22 x 22mm 635785 EF Reducing Tee - Both Ends Reduced x 15 x 15 x 22mm 635786 EF Full Crossover x 15mm 635787 EF Full Crossover x 22mm 635788 EF Partial Crossover x 15mm 635789 EF Partial Crossover x 22mm 635800 EF Straight Tap Connector x 15mm x 1/2" 635801 EF Straight Tap Connector x 15mm x 3/4" 635802 EF Straight Tap Connector x 22mm x 3/4" 635803 EF Bent Tap Connector x 15mm x 1/2" 635804 EF Straight Union Adaptor x 22mm x 1" 635805 EF Bent Union Adaptor x 22mm x 1"

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211806

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

CB (CENTRE BRAND), size & W on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

635757 EF Backplate Elbow x 15mm X 1/2" 635790 EF Female Iron Adaptor Coupling x 15mm x 1/2" 635791 EF Female Iron Adaptor Coupling x 22mm x 3/4" 635792 EF Female Iron Tee x 15 x 15mm x 1/2" 635793 EF Female Iron Tee x 22 x 22mm x 1/2" 635794 EF Male Iron Adaptor x 15mm x 1/2" 635795 EF Male Iron Adaptor x 22mm x 3/4" 635796 EF Male Iron Adaptor x 28mm x 1" 635797 EF Male Iron Adaptor x 35mm x 1-1/4" 635798 EF Male Iron Adaptor x 42mm x 1-1/2" 635799 EF Male Iron Adaptor x 54mm x 2"

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211807

Size:

End feed: 15mm-22mm (see model). Threaded connections: ¼”-2” BSP

Marking:

BOSS, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

62251043 Enfeed F1 Centre Tee 15mm x 15mm x 1/2" 62251054 Enfeed F1 Centre Tee 22mm x 22mm x 1/2" Female Tee:

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208809

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

BOSS, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

62250384, 62250395, 62250403, 62250414, 62250425 & 62250436 Elbow 90 degree C X C: 8mm-108mm. 62250447, 62250458, 62250469, 62250480, 62250491 & 62250510 Street Elbow 90 degree Ftg X C: 8mm-108mm. 62250318, 62250329, 62250340, 62250351, 62250362 & 62250373 Street Elbow 45 degree Ftg X C: 8mm-108mm. 62250255, 62250266, 62250277, 62250288, 62250299, 62250307 Elbow 45 degree C X C: 8mm-108mm. 62250008, 62250019, 62250030, 62250041, 62250052 & 62250063 Straight Coupling with groove C X C: 8mm-108mm. 62250074, 62250085, 62250104, 62250115, 62250126, 62250137, 62250148, 62250159, 62250170, 62250181, 62250192, 62250200, 62250211 & 62250222 Fitting Reducer Ftg X C: 8mm-108mm. 62250532, 62250543, 62250554, 62250565, 62250576 & 62250587 Equal TEE CxCxC: 8mm-108mm. 62250606, 62250617, 62250628, 62250639, 62250650, 62250661, 62250672, 62250683, 62250694, 62250702, 62250713, 62250724, 62250735, 62250746, 62250757, 62250768, 62250779, 62250790, 62250809 & 62250820 Reducing Tee CxCxC: 8mm-108mm. 62250831, 62250842, 62250853, 62250864, 62250875 & 62250886 Cap: 8mm-108mm. 62250905, 62250916, 62250927, 62250938, 62250949, 62250960, 62250971, 62250982, 6225099, 62251010, 62251021 & 62251032 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 62250521 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 62250233 & 62250244 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211810

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

30049602 & 30049605Female 90 Degree Elbow 15mm-54mm x ¼”-2” BSP (F). 30045505 Male 90 Degree Elbow 15mm-54mm x ¼”-2” BSP (M). 30042401 & 30442401 Wallplate 15mm-22mm x ½”-¾” BSP (F). 30056029, 30056025, 30056001, 30056005, 30056009 & 30456005 Female Tee 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The 30065321,30065313, 30065317,30465313,30065301, 30065305, 30065309, 30465301 & 30465305 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208812

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

30424813, 30424817, 30424821, 30024833, 30024829, 30024825, 30024821, 30024817, 30024813, 30024801, 30024805/, 30024841, 30024845, 30024809, 30024837, 30424801, 30424805, 30424825 & 30424829 Elbow 90 degree C X C 8mm-108mm 30033124, 30033121, 30033118, 30033115, 30033112, 30033109, 30033103, 30433109, 30433112, 30433115, 30033201, 30033204, 30433201, 30433204, 30433109, 30433112 & 30433115 Street Elbow 90 degree Ftg X C 8mm-108mm 30039317, 30039308, 30039305, 30039302, 30039311, 30039314, 30439302, 30439305 & 30439308 Street Elbow 45 degree Ftg X C 8mm-108mm 30030017, 30030014, 30030011, 30030008, 30030005, 30030002, 30030023, 30030026, 30430002, 30430005, 30430008 & 30430011 Elbow 45 degree C X C: 8mm-108mm. 30036201, 30036205, 30036209, 30036213, 30036221, 30436201 & 30436205 Street Elbow 90 degree Long Turn Ftg X C 8mm-108mm 30027902, 30027906, 30027910, 30027914, 30027918, 30027922, 30427902 & 30427906 Elbow 90 degree Long Turn C X C 8mm-108mm 30067412, 30067409 & 30467409 Partial Crossover Ftg x C 12mm-28mm 30006210, 30006214, 30006206, 30006202, 30006218, 30006222, 30406206 & 30406202 Slip Straight Coupling C X C 8mm-108mm 30400013, 30400017, 30400021, 30000033, 30000029, 30000025, 30000021, 30000017/30000013, 30000009, 30000005, 30000001, 30000037, 30000041, 30000045, 30400001, 30400005 & 30400025 Straight Coupling with groove C X C 8mm-108mm 30412414, 30412429, 30412435, 30012471, 30012468, 30012465, 30012462, 30012456, 30012453, 30012450, 30012447, 30012444, 30012441, 30012438, 30012435, 30012432, 30012429, 30012417, 30012414, 30012411, 30012402, 30012405, 30012459, 30012474, 30012477, 30012480, 30012483, 30012486, 30012489, 30012492, 30012495, 30012501, 30012423, 30012420, 30412411, 30412432, 30412441, 30412444, 30412420 & 30412423 Fitting Reducer Ftg X C 8mm-108mm 30003113, 30003105, 30003101, 30003109, 30009321, 30009325, 30009317, 30009309, 30009301, 30009305, 30009313, 30009333, 30009337, 30009349, 30009353, 30009365, 30009369, 30403105, 30403101, 30403109, 30409309, 30409317 & 30409325 Reducing Coupler C X C 8mm-108mm and ½” - 1” 30451721, 30451717, 30451713, 30051733, 30051729, 30051725, 30051721, 30051717, 30051713, 30051741, 30051701, 30051705, 30051709, 30051737 & 30451725 Equal TEE CxCxC 8mm-108mm 30058103, 30058105 & 30058107 DWV Equal TEE CxCxC 12mm-54mm 30453820, 30453818, 30053884, 30053882, 30053880, 30053888, 30053878, 30053870, 30053868, 30053866, 30053864, 30053852, 30053850, 30053848, 30053846, 30053844, 30053838, 30053836, 30053834, 30053832, 30053818, 30053816, 30053810, 30053828, 30053820, 30053814, 30053824, 30053826, 30053830, 30053842, 30053876, 30053892, 30053802, 30053804, 30053822, 30053839, 30053840, 30053854, 30053856, 30053857, 30053858, 30053872, 30053874, 30453816, 30453814, 30453828, 30453836 & 30453838 Reducing Tee CxCxC 8mm-108mm 30463214, 30463211, 30063223, 30063220, 30063217, 30063214, 30063211, 30063202, 30063205, 30063208/, 0063226, 30063229, 30463202, 30463205 & 30463217Cap 8mm-108mm. 30067403, 30067406 & 30467403 Full Crossover C x C 12mm-28mm 30021701, 30021705, 30021709, 30021713, 30021717, 30021721, 30021725, 30021729, 30421709 & 30421713 Female Adapter C X C 15mm x ½” NPT (F) - 54mm x 2” NPT (F) 30018602, 30018605, 30018609, 30018613, 30018617, 30018621, 30018625, 30018629, 30018633, 30018637, 30018641, 30018649, 30418609, 30418613, 30418617 & 30418625 Male Adapter C X C 15mm x ½” NPT (M) - 54mm x 2” NPT (M) 30024849 & 30424849 Reducing Elbow 90 degree C X C 15mm-54mm 30069505 BENT CYLINDER UNION 22mm x 1” captive nut and 28mm x 1” captive nut 30069501 & 30469501 STRAIGHT CYLINDER UNION 22mm x 1” captive nut and 28mm x 1” captive nut 30065321, 30065313, 30065317 & 30465313 Bent Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut 30065301, 30065305, 30065309, 30465301 & 30465305 Straight Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The 950513 & 950514 & 950501, 950503 & 953102 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208815

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HL, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

950504, 950505, 950506, 953104 & 953105 Elbow 90 degree C X C 8mm-108mm 950510, 950511 & 950512 Street Elbow 90 degree Ftg X C 8mm-108mm 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C 8mm-108mm 952608, 952609 & 952610 Elbow 45 degree C X C 8mm-108mm 954750 & 954751 Partial Crossover Ftg x C 12mm-28mm 954668 & 954669 Slip Straight Coupling C X C 8mm-108mm 950489, 950490, 950491, 953091 & 953092 Straight Coupling with groove C X C 8mm-108mm 950495, 950496, 953097, 953098, 954678,954680 & 908706 Fitting Reducer Ftg X C 8mm-108mm 950497, 953095, 953096 & 954691 Reducing Coupler C X C 8mm-108mm and ½” - 1” 950515, 950516, 950521 & 953112 Equal TEE CxCxC 8mm-108mm 950517, 950518, 950519, 950520, 950522, 950523, 950526 & 950527 Reducing Tee CxCxC 8mm-108mm 945648, 950531, 952561, 953113 & 953114 Cap 8mm-108mm 953117 & 954749 Full Crossover C x C 12mm-28mm 909039 & 909054Female Adapter C X C 15mm x ½” NPT (F) - 54mm x 2” NPT (F) 909065 & 950546 Male Adapter C X C 15mm x ½” NPT (M) - 54mm x 2” NPT (M) 954710 BENT CYLINDER UNION 22mm x 1” captive nut and 28mm x 1” captive nut 954745 STRAIGHT CYLINDER UNION 22mm x 1” captive nut and 28mm x 1” captive nut 950513 & 950514 Bent Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut 950501, 950503 & 953102 Straight Nut Connect C x Fi 15mm x ½” captive nut - 22mm x ¾” captive nut

Approval Holder:

Travis Perkins PLC

Company Name

Travis Perkins PLC

Address

Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of copper capillary, bronze or brass end feed fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 99°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206359

Size:

See models

Marking:

FA.1512 and FA.2234 models only: Flowflex logo and 1254 on body. All other models: Flowflex logo, size and EN1254 on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Model: Bronze fittings: 4090G.15X1/2: End Feed Female Elbow 15mm x ½”, 4090G.22X1/2: End Feed Female Elbow 22mm x ½”, 4090G.22X3/4: End Feed Female Elbow 22mm x ¾”, 4090G.28X1: End Feed Female Elbow 28mm x 1", 4090G.35X1.1/4: End Feed Female Elbow 35mm x 1 ¼”, 4090G.42X1.1/2: End Feed Female Elbow 42mm x 1 ½”, 4090G.54X2: End Feed Female Elbow 54mm x 2". 4092G.15X1/2: End Feed Male Taper Elbow 15mm x ½”, 4092G.22X3/4: End Feed Male Taper Elbow 22mm x ¾”, 4092G.28X1: End Feed Male Taper Elbow 28mm x 1". 4130G.15X1/2X15: End Feed Female Branch Tee 15 x ½” x 15mm, 4130G.22X1/2X22: End Feed Female Branch Tee 22 x ½” x 22mm, 4130G.22X3/4X22: End Feed Female Branch Tee 22 x ¾” x 22mm, 4130G.28X1/2X28: End Feed Female Branch Tee 28 x ½” x 28mm. 4243G.15X1/2: End Feed Male Taper Adaptor 15mm x ½”, 4243G.15X3/8: End Feed Male Taper Adaptor 15mm x ⅜”, 4243G.15X3/4: End Feed Male Taper Adaptor 15mm x ¾”, 4243G.22X1/2: End Feed Male Taper Adaptor 22mm x ½”, 4243G.22X3/4: End Feed Male Taper Adaptor 22mm x ¾”, 4243G.22X1: End Feed Male Taper Adaptor 22mm x 1", 4243G.28X1: End Feed Male Taper Adaptor 28mm x 1", 4243G.35X1: End Feed Male Taper Adaptor 35mm x 1", 4243G.35X1.1/4: End Feed Male Taper Adaptor 35mm x 1 ¼”, 4243G.42X1.1/2: End Feed Male Taper Adaptor 42mm x 1 ½”, 4243G.54X2: End Feed Male Taper Adaptor 54mm x 2", 4270G.15X1/2: End Feed Female Adaptor 15mm x ½”. 4270G.15X3/8: End Feed Female Adaptor 15mm x ⅜”, 4270G.15X3/4: End Feed Female Adaptor 15mm x ¾”, 4270G.22X1/2: End Feed Female Adaptor 22mm x ½”, 4270G.22X3/4: End Feed Female Adaptor 22mm x ¾”, 4270G.22X1: End Feed Female Adaptor 22mm x 1", 4270G.28X1: End Feed Female Adaptor 28mm x 1", 4270G.35X1: End Feed Female Adaptor 35mm x 1", 4270G.35X1.1/4: End Feed Female Adaptor 35mm x 1 ¼”, 4270G.42X1.1/2: End Feed Female Adaptor 42mm x 1 ½”, 4270G.54X2: End Feed Female Adaptor 54mm x 2". Copper body/Bronze pipe socket fittings: 4341G.15X1/2: End Feed Male Union 15mm x ½”, 4341G.22X3/4: End Feed Male Union 22mm x ¾”, 4341G.28X1: End Feed Male Union 28mm x 1", 4341G.35X1.1/4: End Feed Male Union 35mm x 1 ¼”, 4341G.42X1.1/2: End Feed Male Union 42mm x 1 ½”, 4341G.54X2: End Feed Male Union 54mm x 2". Copper fittings: 5040.1: End Feed 45 Deg Street Elbow 10mm, 5040.12: End Feed 45 Deg Street Elbow 12mm, 5040.15: End Feed 45 Deg Street Elbow 15mm, 5040.22: End Feed 45 Deg Street Elbow 22mm, 5040.28: End Feed 45 Deg Street Elbow 28mm, 5040.35: End Feed 45 Deg Street Elbow 35mm, 5040.42: End Feed 45 Deg Street Elbow 42mm, 5040.54: End Feed 45 Deg Street Elbow 54mm. 5041.12: End Feed 45 Deg Elbow 12mm, 5041.15: End Feed 45 Deg Elbow 15mm, 5041.22: End Feed 45 Deg Elbow 22mm, 5041.28: End Feed 45 Deg Elbow 28mm, 5041.35: End Feed 45 Deg Elbow 35mm, 5041.42: End Feed 45 Deg Elbow 42mm, 5041.54: End Feed 45 Deg Elbow 54mm. 5085.15: End Feed Full Crossover 15mm, 5085.22: End Feed Full Crossover 22mm. 5086.15: End Feed Part Crossover 15mm, 5086.22: End Feed Part Crossover 22mm. 5090.08: End Feed Equal Elbow 8mm, 5090.10: End Feed Equal Elbow 10mm, 5090.12: End Feed Equal Elbow 12mm, 5090.15: End Feed Equal Elbow 15mm, 5090.22: End Feed Equal Elbow 22mm, 5090.28: End Feed Equal Elbow 28mm, 5090.35: End Feed Equal Elbow 35mm, 5090.42: End Feed Equal Elbow 42mm, 5090.54: End Feed Equal Elbow 54mm. 5092.10: End Feed Street Elbow 10mm, 5092.15: End Feed Street Elbow 15mm, 5092.22: End Feed Street Elbow 22mm, 5092.28: End Feed Street Elbow 28mm, 5092.35: End Feed Street Elbow 35mm, 5092.42: End Feed Street Elbow 42mm, 5092.54: End Feed Street Elbow 54mm. 5130.08: End Feed Equal Tee 8mm, 5130.10: End Feed Equal Tee 10mm, 5130.12: End Feed Equal Tee 12mm, 5130.15: End Feed Equal Tee 15mm, 5130.22: End Feed Equal Tee 22mm, 5130.28: End Feed Equal Tee 28mm, 5130.35: End Feed Equal Tee 35mm, 5130.42: End Feed Equal Tee 42mm, 5130.54: End Feed Equal Tee 54mm. 5130R.152215: End Feed Reduced Both Ends 15 x 22 x 15mm, 5130R.222822: End Feed Reduced Both Ends 22 x 28 x 22mm, 5130R.283528: End Feed Reduced Both Ends 28 x 35 x 28mm, 5130R.151212: End Feed Reduced Branch and End Tee 15 x 12 x 12mm, 5130R.221515: End Feed Reduced Branch and End Tee 22 x 15 x 15mm, 5130R.281515: End Feed Reduced Branch and End Tee 28 x 15 x 15mm, 5130R.281522: End Feed Reduced Branch and End Tee 28 x 22 x 15mm, 5130R.282215: End Feed Reduced Branch and End Tee 28 x 15 x 22mm, 5130R.282222: End Feed Reduced Branch and End Tee 28 x 22 x 22mm, 5130R.352222: End Feed Reduced Branch and End Tee 35 x 22 x 22mm, 5130R.352828: End Feed Reduced Branch and End Tee 35 x 28 x 28mm, 5130R.423535: End Feed Reduced Branch and End Tee 42 x 35 x 35mm, 5130R.544242: End Feed Reduced Branch and End Tee 54 x 42 x 42mm, 5130R.121012: End Feed Reduced Branch Tee 12 x 10 x 12mm, 5130R.151015: End Feed Reduced Branch Tee 15 x 15 x 10mm, 5130R.151215: End Feed Reduced Branch Tee 15 x 15 x 12mm, 5130R.221022: End Feed Reduced Branch Tee 22 x 10 x 22mm, 5130R.221522: End Feed Reduced Branch Tee 22 x 15 x 22mm, 5130R.281528: End Feed Reduced Branch Tee 28 x 15 x 28mm, 5130R.282228: End Feed Reduced Branch Tee 28 x 22 x 28mm, 5130R.351535: End Feed Reduced Branch Tee 35 x 15 x 35mm, 5130R.352235: End Feed Reduced Branch Tee 35 x 22 x 35mm, 5130R.352835: End Feed Reduced Branch Tee 35 x 28 x 35mm, 5130R.421542: End Feed Reduced Branch Tee 42 x 15 x 42mm, 5130R.422242: End Feed Reduced Branch Tee 42 x 22 x 42mm, 5130R.422842: End Feed Reduced Branch Tee 42 x 28 x 42mm, 5130R.423542: End Feed Reduced Branch Tee 42 x 35 x 42mm, 5130R.541554: End Feed Reduced Branch Tee 54 x 15 x 54mm, 5130R.542254: End Feed Reduced Branch Tee 54 x 22 x 54mm, 5130R.542854: End Feed Reduced Branch Tee 54 x 28 x 54mm, 5130R.543554: End Feed Reduced Branch Tee 54 x 35 x 54mm, 5130R.544254: End Feed Reduced Branch Tee 54 x 42 x 54mm, 5130R.121210: End Feed Reduced End Tee 12 x 10 x 12mm, 5130R.151510: End Feed Reduced End Tee 15 x 10 x 15mm, 5130R.222215: End Feed Reduced End Tee 22 x 15 x 22mm, 5130R.282815: End Feed Reduced End Tee 28 x 15 x 28mm, 5130R.282822: End Feed Reduced End Tee 28 x 22 x 28mm, 5130R.353515: End Feed Reduced End Tee 35 x 15 x 35mm, 5130R.353522: End Feed Reduced End Tee 35 x 22 x 35mm, 5130R.353528: End Feed Reduced End Tee 35 x 28 x 35mm, 5130R.424235: End Feed Reduced End Tee 42 x 35 x 42mm, 5130R.545442: End Feed Reduced End Tee 54 x 42 x 54mm. 5240.1008: End Feed Reducing Coupling 10 x 8mm, 5240.1508: End Feed Reducing Coupling 15 x 8mm, 5240.1510: End Feed Reducing Coupling 15 x 10mm, 5240.1512: End Feed Reducing Coupling 15 x 12mm, 5240.2215: End Feed Reducing Coupling 22 x 15mm, 5240.2815: End Feed Reducing Coupling 28 x 15mm, 5240.2822: End Feed Reducing Coupling 28 x 22mm, 5240.3522: End Feed Reducing Coupling 35 x 22mm, 5240.3528: End Feed Reducing Coupling 35 x 28mm, 5240.4222: End Feed Reducing Coupling 42 x 22mm, 5240.4228: End Feed Reducing Coupling 42 x 28mm, 5240.4235: End Feed Reducing Coupling 42 x 35mm, 5240.5422: End Feed Reducing Coupling 54 x 22mm, 5240.5428: End Feed Reducing Coupling 54 x 28mm, 5240.5435: End Feed Reducing Coupling 54 x 35mm, 5240.5442: End Feed Reducing Coupling 54 x 42mm. 5243.1008: End Feed Fitting Reducer 10 x 8mm, 5243.1210: End Feed Fitting Reducer 12 x 10mm, 5243.1508: End Feed Fitting Reducer 15 x 8mm, 5243.1510: End Feed Fitting Reducer 15 x 10mm, 5243.1512: End Feed Fitting Reducer 15 x 12mm, 5243.2212: End Feed Fitting Reducer 22 x 12mm, 5243.2215: End Feed Fitting Reducer 22 x 15mm, 5243.2812: End Feed Fitting Reducer 28 x 12mm, 5243.2815: End Feed Fitting Reducer 28 x 15mm, 5243.2822: End Feed Fitting Reducer 28 x 22mm, 5243.3515: End Feed Fitting Reducer 35 x 15mm, 5243.3522: End Feed Fitting Reducer 35 x 22mm, 5243.3528: End Feed Fitting Reducer 35 x 28mm, 5243.4215: End Feed Fitting Reducer 42 x 15mm, 5243.4222: End Feed Fitting Reducer 42 x 22mm, 5243.4228: End Feed Fitting Reducer 42 x 28mm, 5243.4235: End Feed Fitting Reducer 42 x 35mm, 5243.5415: End Feed Fitting Reducer 54 x 15mm, 5243.5422: End Feed Fitting Reducer 54 x 22mm, 5243.5428: End Feed Fitting Reducer 54 x 28mm, 5243.5435: End Feed Fitting Reducer 54 x 35mm, 5243.5442: End Feed Fitting Reducer 54 x 42mm. 5270.08: End Feed Straight Coupling 8mm, 5270.10: End Feed Straight Coupling 10mm, 5270.12: End Feed Straight Coupling 12mm, 5270.15: End Feed Straight Coupling 15mm, 5270.22: End Feed Straight Coupling 22mm, 5270.28: End Feed Straight Coupling 28mm, 5270.35: End Feed Straight Coupling 35mm, 5270.42: End Feed Straight Coupling 42mm, 5270.54: End Feed Straight Coupling 54mm. 5301.08: End Feed Stop End 8mm, 5301.10: End Feed Stop End 10mm, 5301.12: End Feed Stop End 12mm, 5301.15: End Feed Stop End 15mm, 5301.22: End Feed Stop End 22mm, 5301.28: End Feed Stop End 28mm, 5301.35: End Feed Stop End 35mm, 5301.42: End Feed Stop End 42mm, 5301.54: End Feed Stop End 54mm. C803SFEF.1: End Feed Bent Tap Connector 15mm x ½”, C803SFEF.2: End Feed Bent Tap Connector 22mm x ¾”. C805SCEF.4: End Feed Bent Cylinder Union 22mm x 1". C901EF.245: End Feed Metric Imperial Coupling 15mm x ½”, C901EF.25: End Feed Metric Imperial Coupling 22mm x ¾”, C901EF.26: End Feed Metric Imperial Coupling 28mm x 1", C901EF.27: End Feed Metric Imperial Coupling 35mm x 1 ¼”. C903SFEF.1: End Feed Straight Tap Connector 15mm x ½”, C903SFEF.2: End Feed Straight Tap Connector 15mm x ¾”, C903SFEF.3: End Feed Straight Tap Connector 22mm x ¾”. C904LEF.17: End Feed Long Fitting Reducer 15 x 8mm, C904LEF.18: End Feed Long Fitting Reducer 15 x 10mm. C905SCEF.4: End Feed Straight Cylinder Union 22mm x 1", C905SCEF.5: End Feed Straight Cylinder Union 28mm x 1". C906EF.05: End Feed Slip Coupling 15mm, C906EF.08: End Feed Slip Coupling 22mm, C906EF.09: End Feed Slip Coupling 28mm, C906EF.10: End Feed Slip Coupling 35mm. P803WPEF.2: End Feed Wallplate Elbow 15mm x ½”, P803WPEF.5: End Feed Wallplate Elbow 22mm x ¾”. Brass fittings: FA.1512: End Feed Female Adaptor 15mm x ½”, FA.2234: End Feed Female Adaptor 22mm x ¾”, FA.281: End Feed Female Adaptor 28mm x 1".

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of electric instantaneous water heaters. The DEX and DCX models incorporate a spherical ball valve on the inlet. The CEX and DEX models incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The inlet incorporates a strainer. Maximum working pressure 10 bar (DEX models only) All other models open outlet. Maximum operating temperature: ES3/4/5 and Zip Hydrotap G4/G5 ranges – 65ºC. CEX, DEX and DCX ranges - 70°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2207038

Size:

ES, Zip HydroTap and CEX models - ½” BSP male inlet and outlet. DEX and DCX models- 3/8” BSP captive nut inlet and outlet that connects to a valve with a ½” BSP male inlet.

Marking:

Zip inline and Clage on front cover. Zip inline, model, Maximum temperature and pressure and technical information on label on body.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

ES3 ES4 ES6 CEX CEX-U DEX12 NEXT DCX NEXT ZIP HydroTap G4 & G5 booster

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Manufacturer:

Clage GmbH

Company Name

Clage GmbH

Address

PIROLWEG 1 5 21337 LUENEBURG GERMANY

General Email

View All Listings by this Company