Directory Search Results

Print List

#2204525

‘Supercast SW20 (red), Supercast SW10 (black) & Supercast SW30 (green)’. Extruded, PVC waterstop materials. ‘Supercast SW20 (red)’ is for use with water up to 50°C. ‘Supercast SW10 (black) & Supercast SW30 (green)’ are for use with water up to 23°C This material is for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992 with respect to normal frequency of joints. The material has been tested at a reduced surface area to volume ratio of 1000mm² per litre as specified in BS 6920: Part 1.

Section:
5505 Sealants - Flat Faced Joints
Section Subtitle:
Waterstops. These materials are for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992 with respect to normal frequency of joints. The materials have been tested at a reduced surface area to volume ratio of 1000mm² per litre as specified in BS 6920: Part 1.
WRAS Approval Number:
2204525
Expiry date:
30/04/2027

Approval Holder:
Saint-Gobain Construction Chemicals UK Limited
Company Name
Saint-Gobain Construction Chemicals UK Limited
Address
Saint-Gobain House, East Leake, Loughborough, Leicestershire
Postcode
LE12 6JU

View All Listings by this Company

Print This Approval


#2107582

'Interfix Colle Gel PVC'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5560 Solvent Cements
Expiry date:
31/07/2026

Approval Holder:
FITT MC SAM
Company Name
FITT MC SAM
Address
17 Avenue Albert II-98000
Country
Monaco

View All Listings by this Company

Print This Approval


#2204026

Stop valve with a black plastic body, NBR ‘O’-rings and quarter turn headwork. Maximum working pressure 16.0 bar. Cold water use only.

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
2204026
Size:
¼” BSP (F) x ¼” BSP (M)
Marking:
TEFEN and flow arrow on operating member
Installation Requirements:
R001
Expiry date:
30/04/2027
Model:
23002404042

Approval Holder:
Tefen Flow & Dosing Technologies
Company Name
Tefen Flow & Dosing Technologies
Address
Kibbutz Nahsholim 3081500 Israel
Phone
+97246395550
General Email
info@tefentech.com

View All Listings by this Company
Manufacturer:
Tefen Flow & Dosing Technologies
Company Name
Tefen Flow & Dosing Technologies
Address
Kibbutz Nahsholim 3081500 Israel
Phone
+97246395550
General Email
info@tefentech.com

View All Listings by this Company

Print This Approval


#2204057

Range of floor standing, single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member and a lockable diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 75°C.

Section:
0463 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
2204057
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
ROXOR on rear of spout (ARVX21), ROXOR on rear of base plate (WINX21).
Installation Requirements:
R001 R020
Expiry date:
30/04/2027
Model:
Arvan Range: ARVX21 Windon Range: WINX21 Where X denotes the finish, and can be replaced with the following: 3 - Chrome, 4 - Matt Black, 5 - Polished Gunmetal, 7 - Brushed Gunmetal, 8 - Brushed Brass.

Approval Holder:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company
Manufacturer:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company

Print This Approval


#2204330

Single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The solenoid is supplied by an isolation valve that incorporates a stainless steel strainer. The spout outlet incorporates a plastic aerator. The product is also supplied with stainless steel braided PEX lined flexible hose assembly for connection to the solenoid valve with ¾” BSP (F) captive nut end connection. Maximum working pressure 6.0 bar. Maximum operating temperature 40°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2204330
Size:
15mm to ¾ BSP (M) compression isolation valve
Marking:
Cistermiser on body
Installation Requirements:
R001 R006 R007
Expiry date:
30/04/2027
Model:
NT-EX

Approval Holder:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company

Print This Approval


#2110031

Range of deck mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Rib model is supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110031
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout.
Installation Requirements:
R001 R006 R007 R009
Expiry date:
31/10/2026
Model:
ECOTAP-D FA01, ECOTAP-D FA02, ECOTAP-D FA03, HK-Rib.

Approval Holder:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company

Print This Approval


#2110032

Range of wall mounted, single hole, single outlet (fixed) electronically controlled combination tap assemblies (brushed stainless steel). The flow is controlled by a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The spout outlet incorporates a plastic aerator. The products are supplied with plastic backnuts and a stainless steel braided PEX lined flexible hose assembly for installation between the tap and the solenoid valve. The HK-Cha models added September are also supplied with a plastic flow regulator. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2110032
Size:
Stainless steel braided PEX lined flexible hose assembly incorporating ½ captive nut end connection.
Marking:
Fastdry (trademark of Hokwang Industries Co., Ltd.) on spout
Installation Requirements:
R001 R007 R009 R040
Expiry date:
31/10/2026
Model:
ECOTAP-W FA01, ECOTAP-W FA02, InnoWash FA. Models added Sept 2022: HK-Cha, HK-Cha Shorter Ver..

Approval Holder:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company
Manufacturer:
Hokwang Industries Co., Ltd.
Company Name
Hokwang Industries Co., Ltd.
Address
131 Dingping Rd., Ruifang District, New Taipei City, 22452
Country
Taiwan
Phone
+886-2-2496-6425
General Email
hokwang@hokwang.com

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2208800

Range of in-line non-verifiable single check valve assemblies consisting of a spring loaded resilient trim single check valve cartridge housed within a DZR brass or nickel plated DZR brass body. Compression models are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2208800
Size:
see model
Marking:
Altecnic logo, flow arrorw, CR and size mould on body Model added September 2022 Altecnic logo, size, PN, CR, direction of flow arrow on body of valve
Installation Requirements:
R001
Expiry date:
31/08/2027
Model:
BI-100034 – 15mm compression x 15mm compression BI-100S22 - 22mm compression x 22mm compression ALT-SCV015 - ½” BSP (F) X ½” BSP (F) ALT-SCV020 - ¾” BSP (F) X ¾” BSP (F) ALT-SCV025 - 1” BSP (F) X 1” BSP (F) ALT-SCV032 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV040 - 1¼” BSP (F) X 1¼” BSP (F) ALT-SCV050 - 1 ½” BSP (F) X 1 ½” BSP (F) ALT-SCV060 - 2” BSP (F) X 2” BSP (F) Model added September 2022 BI-100S28-28mm compression x 28mm compression

Approval Holder:
Altecnic Limited
Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

Print This Approval


#2205323

Range of sectional stainless steel storage cistern with lid. Maximum operating temperature 60°C.

Section:
0140 Cisterns
Section Subtitle:
Cold water storage and lids, metal.
WRAS Approval Number:
2205323
Size:
1000L – 100,0000L
Marking:
Liangyu company logo, capacity and website on adhesive label on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
LYSSWT-01

Approval Holder:
Liangyu Hitech Technical Services LLC.
Company Name
Liangyu Hitech Technical Services LLC.
Address
Office 2003/2004 Churchill Executive Tower Business BAy Dubai
Country
United Arab Emirates

View All Listings by this Company

Print This Approval


#2203302

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2203302
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
SMR on operating member
Installation Requirements:
R001 R010 R090
Expiry date:
31/03/2027
Model:
All in one pull out

Approval Holder:
San Marco Rubinetteria S.r.l.
Company Name
San Marco Rubinetteria S.r.l.
Address
Via Carducci, 10 Pray
Postcode
13867
Country
Italy
Phone
+39 15765 5244
General Email
egiglio@sanmarcotaps.com

View All Listings by this Company

Print This Approval


#2204314

Single hole, single outlet (swivel) combination tap assembly, (Chrome plated) brass body incorporating a ceramic cartridge headwork with a single lever operating member. The product incorporates a pull out spray. The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2204314
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Franke on operation member.
Installation Requirements:
R001 R010 R090
Expiry date:
30/04/2027
Model:
FUJI PULL OUT

Approval Holder:
Franke UK Ltd.
Company Name
Franke UK Ltd.
Address
West Park, MIOC, Styal Road, Manchester
Postcode
M22 5WB
Country
United Kingdom
Phone
0161 4360280

View All Listings by this Company

Print This Approval


#2205048

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (various finishes), incorporating a push on/off headwork with rotary temperature control using dome type lever operating member. Both inlets incorporate stainless steel strainers an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Some models are supplied with lever type pop up waste (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205048
Note:
No testing performed on pop up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections
Marking:
Hansgrohe on front of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
Models with a waste set: 71 750 xxx Hansgrohe Talis Select E Basin mixer 110 71 752 xxx Hansgrohe Talis Select E Basin mixer 240 72 040 xxx Hansgrohe Talis Select S Basin mixer 80 72 042 xxx Hansgrohe Talis Select S Basin mixer 100 72 044 xxx Hansgrohe Talis Select S Basin mixer 190 Models without a waste set: 72 041 xxx Hansgrohe Talis Select S Basin mixer 80 72 043 xxx Hansgrohe Talis Select S Basin mixer 100 72 045 xxx Hansgrohe Talis Select S Basin mixer 190 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2205052

Wall mounted, single hole, single outlet (fixed) combination tap assembly with brass body (various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205052
Note:
Basic set 10902180 is not part of this approval
Size:
For use with basic set 10902180 which has ½" BSP (F) inlets
Marking:
AXOR on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/05/2027
Model:
11 026 xxx AXOR Urquiola Single lever basin mixer Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2205060

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies, various finishes - see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205060
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Roxor (brand of Ultra Finishing Ltd.) on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2027
Model:
WIN305 Windon Mono Basin mixer (Chrome), ARV305 Arvan Mono Basin mixer (Chrome), WIN370 Windon High Rise mixer (Chrome), ARV370 Arvan High Rise mixer (Chrome), WIN405 Windon Mono Basin mixer (Matt Black), ARV405 Arvan Mono Basin mixer (Matt Black), WIN470 Windon High Rise mixer (Matt Black), ARV470 Arvan High Rise mixer (Matt Black), WIN805 Windon Mono Basin mixer (Brushed Brass), ARV805 Arvan Mono Basin mixer (Brushed Brass), WIN870 Windon High Rise mixer (Brushed Brass), ARV870 Arvan High Rise mixer (Brushed Brass), WIN505 Windon Mono Basin mixer (Polished Gunmetal), ARV505 Arvan Mono Basin mixer (Polished Gunmetal), WIN570 Windon High Rise mixer (Polished Gunmetal), ARV570 Arvan High Rise mixer (Polished Gunmetal), WIN705 Windon Mono Basin mixer (Brushed Gunmetal), ARV705 Arvan Mono Basin mixer (Brushed Gunmetal), WIN770 Windon High Rise mixer (Brushed Gunmetal), ARV770 Arvan High Rise mixer (Brushed Gunmetal).

Approval Holder:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company
Manufacturer:
Ultra Finishing Ltd.
Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Ind Est. Lancashire, BL3 2NH
Phone
01282 436934

View All Listings by this Company

Print This Approval


#2204316

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65ºC.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2204316
Size:
Stainless-steel braided TPSiV lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Herz logo on operating member. Manufacturer logo (Herz), manufacturer “letter” date code on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2027
Model:
Infinity I10

Approval Holder:
Herz d.o.o.
Company Name
Herz d.o.o.
Address
Grmaska Cesta 3 1275 Smartno pri Litiji
Country
Slovenia
Phone
+38 6 41 390 045

View All Listings by this Company
Manufacturer:
Herz d.o.o.
Company Name
Herz d.o.o.
Address
Grmaska Cesta 3 1275 Smartno pri Litiji
Country
Slovenia
Phone
+38 6 41 390 045

View All Listings by this Company

Print This Approval


#2205902

Single hole, single outlet, fixed combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a lever operated pop-up waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205902
Note:
No testing performed on pop-up waste
Size:
Stainless steel braided PE-X lined flexibles hoses with 15mm compression end connections
Marking:
Bristan on the operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
CAP EBAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2205905

Single hole, single outlet fixed combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205905
Note:
Product supplied with approved click type waste.
Size:
15mm copper tails
Marking:
Bristan on plinth
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2027
Model:
DUL BAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2205908

Single hole, single outlet, fixed combination tap assembly (chrome plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Product is supplied with an approved click type waste. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205908
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” BSP (F) captive nut end connections.
Marking:
Bristan on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2027
Model:
BRT SQU2 SMBAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2205340

Single hole, single outlet (fixed) combination tap assemblies (brass body, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2205340
Note:
No testing performed on pop-up waste.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Kohler on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/05/2027
Model:
72275W-4-** Where ** denotes finish and can be replaced by: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 96 of 590

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.