FLOMASTA range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207402

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Flomasta, WRAS, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

FLOMASTA compression fittings 20-63mm 320*****U ADAPTOR MALE FLOMASTA 320A*****U ADAPTOR FEMALE FLOMASTA 320B*****U END PLUG FLOMASTA 320C*****U FLANGED ADAPTOR FLOMASTA 320D*****U FLANGED ADAPTOR (4 BOLTS)FLOMASTA 321******U COUPLING FLOMASTA 321A*****U REDUCING COUPLING FLOMASTA 321B*****U REPAIR COUPLING FLOMASTA 322******U ELBOW 90 FLOMASTA 322A*****U ELBOW THREADED MALE FLOMASTA 322C*****U ELBOW FEMALE for POP-UP FLOMASTA 322B*****U ELBOW THREADED FEMALE FLOMASTA 322D*****U WALL ELBOW COMPRESSION FLOMASTA 323******U TEE THREADED FEMALE FLOMASTA 323A*****U TEE THREADED MALE FLOMASTA 324******U TEE 90° ELYSEE FLOMASTA 324A*****U TEE REDUCING FLOMASTA 321C*****U UNIVERSAL ADAPTOR FLOMASTA Where XXX-YYY-ZZZ for product family cocdes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e altter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:

1220 Fittings for use with Tube and Pipe

Section Subtitle:

Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.

WRAS Approval Number:

241002051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Hawle logo and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315

Product Images

Approval Holder:

E-Hawle Armaturenwerke GmbH

Company Name

E-Hawle Armaturenwerke GmbH

Address

Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

Indirect heat interface unit with copper brazed, stainless-steel heat exchangers, providing heating and instantaneous hot water. The product incorporates an expansion vessel on the cold-water supply to the plate heat exchanger and a safety relief valve on the heating circuit set @ 2.5 bar. The DHW and heating circuits are both fitted with drain valves incorporating cover caps. Maximum working pressure 16 Bar (Primary), 10 Bar (DHW) & 3 Bar (Heating) Maximum operating temperature 95°C

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP (M)

Marking:

YGHP, serial number, pressure, temperature and other technical information on adhesive label inside body

Installation Requirements:

R001 R140 R360 R511

Expiry date:

31/10/2029

Model:

YGHP E 018

Product Images

Manufacturer:

YGHP Ltd

Company Name

YGHP Ltd

View All Listings by this Company

Range of water meters with either cast iron (blue epoxy coated) or stainless-steel bodies, transducers and EPDM rubber O-rings. Maximum working pressure 25.0 Bar. Maximum operating temperature 50.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged - DN40 to DN100.

Marking:

Helvatron, Model number and product information on data plate.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

HELVATRON H20 FLANGE

Approval Holder:

Helvatron AG

Company Name

Helvatron AG

Address

JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Range of in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) to 1½” BSP (M)

Marking:

ZENNER on cover. Flow arrow on body. Zenner and product info on meter face.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

IUWS hydr. 2,5-110-1/2 D-cell IUWS hydr. 2,5-165-1/2 D-cell IUWS hydr. 2,5-170-1/2 D-cell IUWS hydr. 2,5-190-1/2 D-cell IUWS hydr. 4-105-3/4 D-cell IUWS hydr. 4-130-3/4 D-cell IUWS hydr. 4-165-3/4 D-cell IUWS hydr. 4-190-3/4 D-cell IUWS hydr. 4-220-3/4 D-cell IUWS hydr. 10-150-1 D-cell IUWS hydr. 10-160-1 D-cell IUWS hydr. 10-160-5/4 D-cell IUWS hydr. 10-260-5/4 D-cell IUWS hydr. 16-150-6/4 D-cell IUWS hydr. 16-200-6/4 D-cell IUWS hydr. 16-300-6/4 D-cell IUWS hydr. 25-300-2 D-cell

Product Images

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Manufacturer:

Zenner Meters (Shanghai) Ltd.

Company Name

Zenner Meters (Shanghai) Ltd.

Address

No 15 Dongxing Road Songjiang Ind Zone Shanghai

Country

China

View All Listings by this Company

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:

1505 Water Meters

WRAS Approval Number:

240902075

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

All models available in body lengths of 165, 170 and 190mm

Size:

1" BSP (M)

Marking:

Contazara, Model and technical information on faceplate. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

CZ4000- Q3=4

Approval Holder:

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Company Name

Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Address

Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below, note all sizes listed in DN are flanged connections.

Marking:

Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

IUW Q3-25, DN50, Length 200mm IUW Q3-25, DN50, Length 270mm IUW Q3-25, DN50, Length 300mm IUW Q3-40, DN65, Length 200mm IUW Q3-40, DN65, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 200mm IUW Q3-100, DN100, Length 360mm IUW Q3-100, DN100, Length 350mm IUW Q3-100, DN100, Length 250mm IUW Q3-160, DN125, Length 250mm IUW Q3-250, DN150, Length 300mm IUW Q3-250, DN150, Length 500mm IUW Q3-400, DN200, Length 350mm IUW Q3-630, DN250, Length 450mm IUW Q3-1000, DN300, Length 500mm

Product Images

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) ¾” BSP (M

Marking:

Janz logo, model code and other info on meter box

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Smartio DN15 Q3=2,5 R*** Smartio DN20 Q3=2,5 R*** Smartio DN20 Q3=4 R*** Body lengths DN15: 105 mm / 110mm / 115mm/ 134m / 142mm / 145mm / 160mm / 165mm / 170mm / 190mm / 220mm DN20: 105mm / 110mm / 115mm / 139mm /160mm / 165mm / 190mm / 220mm

Product Images

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

View All Listings by this Company

Range of water meters with brass bodies with plastic impellers. LXSZ models incorporate a spherical valve on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

LXSZxx: Laison name and logo on meter face. Flow arrow on body LXCxx: Laison name and logo on meter face. Flow arrow on plastic housing

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

LXSZxx & LXCxx Where xx denotes the inlet/outlet connections and can be replaced with any of the following: 15 = ¾” BSP (M) 20 = 1” BSP (M) 25 = 1.1/4” BSP (M)

Product Images

Approval Holder:

Hangzhou Laison Technology Co., Ltd.

Company Name

Hangzhou Laison Technology Co., Ltd.

Address

No.525 Xixi Road, Xihu district, Hangzhou, Zhejiang province, China

View All Listings by this Company

Range of water meters with cast iron bodies (blue epoxy coating). Maximum working pressure 16.0 Bar Maximum operating temperature 70.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 (270mm, 300mm & 311mm) DN150 (300mm)

Marking:

Sensus,and product info on cover.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

Cordonel

Product Images

Approval Holder:

Sensus UK Systems Ltd

Company Name

Sensus UK Systems Ltd

Address

North Wing Central 40, Crockford Lane, Basingstoke, RG24 8GU

Country

Basingstoke

View All Listings by this Company

Manufacturer:

Sensus GmbH Hannover

Company Name

Sensus GmbH Hannover

Address

Meineckestrasse 10 Laatzen 30880 Germany

View All Listings by this Company