Overhead shower outlet (brass body, various finishes) with an EPDM `O`-ring and a stainless-steel filter. The shower head incorporates a flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2303032

Size:

½” BSP (F)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

27450 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000= Chrome optic finish, 800= PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Ceiling mounted shower outlet with black plastic body incorporating EPDM ‘O’-rings.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2303345

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

HKP (trademark of Zhejiang Kaiyue Plastic Industry Co.,Ltd) on body.

Installation Requirements:

R001 R040

Expiry date:

31/03/2028

Model:

88600036

Product Images

Approval Holder:

Zhejiang Kaiyue Plastic Industry Co., Ltd

Company Name

Zhejiang Kaiyue Plastic Industry Co., Ltd

Address

No. 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone

Country

Zhejiang,

Phone

+86-0579-84793818

View All Listings by this Company

Manufacturer:

Zhejiang Kaiyue Plastic Industry Co., Ltd

Company Name

Zhejiang Kaiyue Plastic Industry Co., Ltd

Address

No. 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone

Country

Zhejiang,

Phone

+86-0579-84793818

View All Listings by this Company

Range of Y-strainers with a brass body incorporating a stainless-steel strainer and EPDM ‘O’-rings. For use with copper pipe manufactured to BS EN1057. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1715 Strainers

Size:

15mm, 22mm & 28mm compression.

Marking:

RWC, size and flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/10/2028

Model:

Protecto YC – LINS400001 – 15mm, Protecto YC – LINS400002 – 22mm, Protecto YC – LINS400006 – 28mm.

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Screwdriver operated spherical (drain) valve with a brass body, brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2211302

Size:

½” BSP (M) x 14.92mm hose union connection.

Marking:

Caleffi logo on body.

Installation Requirements:

R001 R511

Expiry date:

30/11/2027

Model:

538400

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of PVC or EPDM lined shower hoses with stainless steel outer (chrome or black finish) or PVC reinforced (chrome plated finish) outer layer. Maximum operating temperature 65°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2210064

Note:

Open outlet use only

Size:

½” BSP captive nut.

Marking:

TRITON on captive nut.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

Stainless steel double locked hoses: 28100240: 1.0m Electrolytic Chrome. 28100210: 1.25m Electrolytic Chrome. 28100260: 1.75m Electrolytic Chrome. 28100270: 2.0m Electrolytic Chrome. 28100300: 1.5m Electrolytic Chrome. 28100380: 0.75m Electrolytic Chrome. 28100410: 1.5m Matt Black (Satin Black). 28100390: 0.75m Matt Black (Satin Black). 28100400: 1.0m Matt Black (Satin Black). H2006S* & H2023S* * denotes surface finish and can be replaced with: CE = Electrolytic Chrome or MB = Matt (Satin) Black. PVC reinforced hoses: 28100340: 1.5m Chrome Plated. 28100370: 1.0m Chrome Plated.

Approval Holder:

Triton Showers

Company Name

Triton Showers

Address

Triton Road, Nuneaton, Warwickshire

Postcode

CV11 4NR

Country

United Kingdom

Phone

02476 324423

General Email

paulrowley@tritonshowers.co.uk

View All Listings by this Company

Range of chromium plated stainless steel or brass interlocked shower hoses with an optional PVC outer layer. Incorporating either a PVC or TPE inner hose and EPDM gaskets. Maximum operating temperature 60°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2106054

Note:

Open outlet use only.

Size:

½” BSP Captive nut inlet x outlet.

Marking:

Elisa on conical nut.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

706433 1.5m Matt Black 706432 1.5m Chrome 706434 1.5m Brushed Brass

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Stainless steel double interlocking, PVC inner lined flexible hose with EPDM washers. Maximum working pressure: 10 bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2301009

Size:

Stainless steel double interlocking, PVC lined flexible hose assembly with 7/8” – 20UNEF end connections

Marking:

Top-Rinse logo & WRAS on connector and date of manufacture (YYYY).

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

98-HS

Product Images

Approval Holder:

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Address

Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang

Country

China

Phone

+86-576-87121119

View All Listings by this Company

Manufacturer:

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name

Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Address

Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang

Country

China

Phone

+86-576-87121119

View All Listings by this Company

Range of shower hoses with PVC outer and PEX inner liner with EPDM washers.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2212018

Note:

Open outlet use only.

Size:

½” BSP (F) conical nut end connections.

Marking:

Delmei, Wras and year (YYYY) on connector

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

DH1212 DH1213

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Range of metal double interlocked (PVC or PEX lined), PVC spiral or PVC flat shower hoses.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2303009

Note:

Open outlet use only

Size:

Please refer to model for DN size. ½” x ½” BSP (F) captive nut end connections.

Marking:

HRN (trademark of APIS (Xiamen) Co., Ltd.), WRAS and date of manufacture (YYMM) on ferrule.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Model 12X-X-X-X-X-X-X-X-01 – Metal Double interlock shower hose X denotes: 1st X – Code for DN: 0 – DN7, 1 - DN11, 2nd & 3rd X – Code for Length (30-250cm), 4th X – Code for the hose colour 1 = Polish, 2 = Chrome plating, 3 = PVD, 4 = Spray, 5 = Coated, 5th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 6th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 7th X – Code for Nut finish: 1 – Polish, 2 – Chrome plating, 3 – PVD, 4 – Spray, 5 – Palette, 8th X – Code for Nipple material: 1 – Brass, 2 – Stainless steel, 3 – Plastic, End washer is EPDM or NBR. The inner hose is PVC or PEX material. Model 14X-X-X-X-X-X-X-X-01 – PVC Spiral Shower Hose: X denotes: 1st X – Code for DN: 0 – DN8, 1 - DN11, 2nd & 3rd X – Code for Length (30-250cm), 4th X – Code for the hose colour: 1 – Black, 2 – White, 3 – Multi colour, 5th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 6th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 7th X – Code for Nut finish: 1 – Polish, 2 – Chrome plating, 3 – PVD, 4 – Spray, 5 – Palette, 8th X – Code for Nipple material: 1 – Brass, 2 – Stainless steel, 3 – Plastic, Model 15X-X-X-X-X-X-X-X-01 – PVC flat shower hose: 1st X – Code for DN: 0 – DN8, 1 - DN11, 2nd & 3rd X – Code for Length (30-250cm), 4th X – Code for the hose colour: 1 – Black, 2 – White, 3 – Multi colour, 5th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 6th X – Code for inlet: 1- F1/2 R-crossline nut, 2 – F1/2 R-crossline nut(O-ring), 3 – F1/2 R-hexagon nut, 4 – F1/2 Knurling nut, 5 – F1/2 Knurling nut(trapeziform), 6 – F1/2 Straight-knurling nut, 7 – F1/2 Hexagon nut, 7th X – Code for Nut finish: 1 – Polish, 2 – Chrome plating, 3 – PVD, 4 – Spray, 5 – Palette, 8th X – Code for Nipple material: 1 – Brass, 2 – Stainless steel, 3 – Plastic,

Product Images

Approval Holder:

APIS (Xiamen) Co., Ltd.

Company Name

APIS (Xiamen) Co., Ltd.

Address

1F, 5F, Main building No 198-204 YingYao Road

Country

Jimei District

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2103343

Size:

DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)

Marking:

Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)

Installation Requirements:

R001

Expiry date:

31/03/2026

Model:

JL-F1400120012487 & JL-140038003813

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company