Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C
Range of bib and hose union taps incorporating either brass or DZR brass (142HU prefix models only) bodies and non-rising spindle headworks. The FGK suffix models incorporate a ferrule guard and key (lockshield). The inlet and outlet of the 142HU (508107) and 142HU FGK (501117) models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperatures: 142HU (508107) and 142HU FGK (508117) models 65°C, all other models 90°C.
Range of wall mounted bib taps with bronze bodies, incorporating rising spindle headworks. Maximum working pressure 16.0 bar. Maximum operating pressure 85°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 13.20302.G15.CP5R-8510 | ½” BSP (M) | 16 | 85 | V&G,WRAS,1/2,MMYY | BODY | No | Rising spindle | Open Outlet | Flexible Spout | ||
| 13.20302.G20.CP5R-8510 | ¾” BSP (M) | 16 | 85 | V&G,WRAS,3/4,MMYY | BODY | No | Rising spindle | Open Outlet | Flexible Spout | ||
| 13.20302.G15.CP5R-8511 | ½” BSP (M) | 16 | 85 | V&G,WRAS,1/2,MMYY,CR | BODY | No | Rising spindle | Open Outlet | Flexible Spout | ||
| 13.20302.G20.CP5R-8511 | ¾” BSP (M) | 16 | 85 | V&G,WRAS,3/4,MMYY,CR | BODY | No | Rising spindle | Open Outlet | Flexible Spout | ||
| 13.20362.G15.CP5R-8511 | ½” BSP (M) | 16 | 85 | V&G,WRAS,1/2,MMYY,CR | BODY | No | Rising spindle | Open Outlet | Flexible Spout |
Wall Mounted Undefinable air gap see IRNs Incorporates approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
A7255AA range of PEX lined shower hoses incorporating corrugated interlocking metal hoses with various finishes. All hoses incorporate EPDM washers. Maximum operating temperature 65°C.
Rinnai range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C
Range of automatic air venting valves with a brass body and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TSSL1 | Chrome | 15mm Compression | 5 | 60 | AQUALISA | shower valve | No | Single sequential | Not Applicable | Inlet Strainer, Shower Hose, Handset, Riser Rail | |
| AQSL1 | Chrome | 15mm Compression | 5 | 60 | AQUALISA | shower valve | No | Single sequential | Not Applicable | Inlet Strainer, Shower Hose, Handset, Riser Rail |
Wall Mounted thermostatically controlled shower valve supplied with shower hand-set, hose with riser rail and overhead shower in chrome finish. Incorporating a 1/4 turn ceramic disc headwork & flow regulator. Maximum temperature 65°C. Maximum Pressure 5 bar.
Range of wall mounted concealed thermostatic blending valves with brass bodies (various finishes), incorporating single sequential headworks with single lever operating members. The inlet couplings incorporate plastic flow regulators & metal strainers. The outlets incorporate approved check valve cartridges, however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C
Page 827 of 893
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
