Directory Search Results

Print List

#240602718

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602718
Size:
½” BSP (M)
Marking:
BAGNODESIGN and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
BDS-B695-D13-ESG1 concealed WC flushing cistern

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#250102706

Concealed WC dual flushing cisterns with a BS 1212- 4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a manually operated dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. The inlet supply incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250102706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Honjim logo and WRAS logo on cistern cover. 6 litre line inside cistern.
Installation Requirements:
R001 R556
Expiry date:
31/01/2030
Model:
G-1030

Approval Holder:
Zhejiang Honjim Intelligent Technology Co., Ltd
Company Name
Zhejiang Honjim Intelligent Technology Co., Ltd
Address
Port-neighboring Industrial estate, Jiantiao Town, Sanmen County, Taizhou City, Zhejiang Province,China

View All Listings by this Company

Print This Approval


#250401701

WC Cistern incorporating a side or bottom entry float operated inlet valve and a dual flush Drop Valve (Acclaim V) or Syphon (Acclaim S) of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by lever or manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250401701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male inlet connection.
Marking:
‘Cascade +’ or ‘Dudley Turbo’ on syphon. ‘Dudley’ and ‘TD’ on drop valve ‘HYDROFLO’.‘DUDLEY BS 1212/4’ inlet valve, Thomas Dudley Ltd on cistern. 6 litre line inside cistern
Installation Requirements:
R001 R280 R556
Expiry date:
30/04/2030
Model:
Acclaim V & Acclaim S.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250602712

Concealed WC dual flushing cistern with a vertical BS 1212-4 (2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush pneumatic outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 Bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
250602712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
My life, Wras and model number on cistern, 6 Litre mark inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2030
Model:
MLSOLCC

Approval Holder:
MyLife Bathrooms Limited
Company Name
MyLife Bathrooms Limited
Address
Greenbank Industrial Estate Rampart Road Newry
Postcode
BT34 2QU
Country
United Kingdom
Phone
07835115808
General Email
cahal.lynch@mylifebathrooms.com

View All Listings by this Company

Print This Approval


#250201703

Concealed BS EN 14055: 2018 WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 4 litres. The cistern can be operated by touch free electronic or manual push button / push plate options. The supply hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
250201703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP Male or 15mm Push-fit Inlet connection.
Marking:
Front service cover is marked with Dudley logo moulding Top of outlet drop valve marked TD Front nut of inlet valve marked DUDLEY
Installation Requirements:
R001 R574 R581
Expiry date:
31/01/2030
Model:
Vantage Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2104902

BS EN 997:2018 RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern with a side entry compact type float operated inlet valve which discharges via a Type AG airgap and a dual flush pneumatic drop valve capable of full flush volumes of 4.5 litres and a reduced flush of 3 litres. The inlet connection hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2104902
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘RAK CERAMICS’
Installation Requirements:
R001 R559
Expiry date:
30/04/2026
Model:
RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan and Thomas Dudley Illusion A or Illusion Compact Universal Frame

Approval Holder:
Ruddy Joinery & Fit-Out Specialists
Company Name
Ruddy Joinery & Fit-Out Specialists
Postcode
MK45 5BS

View All Listings by this Company

Print This Approval


#2304110

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304110
Size:
Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.
Marking:
ABI INTERIORS LOGO on front cover, Model number & product info on adhesive label on body
Installation Requirements:
R001 R009 R170 R040
Expiry date:
30/04/2028
Model:
17450

Approval Holder:
ABI Interiors International LTD
Company Name
ABI Interiors International LTD
Address
10 John Street London
Postcode
WC1N 2EB
Country
United Kingdom
Phone
02045 389222
General Email
robert.b@abiinteriors.com

View All Listings by this Company

Print This Approval


#250902707

‘TankBoost’ range of cold-water storage cisterns, incorporating a float operated inlet valve. The C5 suffix models incorporate a Type ‘AB’ air gap with a meshed weir overflow (verified by test - suitable for backflow protection against Fluid Category 5). Cisterns with SUB in the model code incorporate a submersible pump and an expansion vessel. All models incorporate a screened warning pipe and dip tube. Models without a C5 suffix also incorporate a screened breather. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
250902707
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Salamander pumps and salamander logo on body. Salamander pumps, model number (which indicates capacity), product information and serial number on adhesive label on body.
Installation Requirements:
R001 R008 R415 R574
Expiry date:
30/09/2030
Model:
TNK-100-SUB, TNK-200-SUB, TNK-350-SUB, TNK-450-SUB, TNK-100, TNK-200, TNK-350, TNK-450. Type ‘AB’ air gap models: TNK-100-SUBC5, TNK-200-SUBC5, TNK-350-SUBC5, TNK-450-SUBC5, TNK-100-C5, TNK-200-C5, TNK-350-C5, TNK-450-C5. Where: 100, 200, 350, 450 indicates the stored volume of water in the tank in litres. SUB indicates that the unit includes a submersible pump for boosting the stored water in the tank. C5 indicates a CAT5 variant of the unit.

Approval Holder:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

Print This Approval


#250902723

‘TankBoost 5 bar’ range of cold-water storage cisterns, incorporating a float operated inlet valve. The C5 suffix models incorporate a Type ‘AB’ air gap with a meshed weir overflow (verified by test - suitable for backflow protection against Fluid Category 5). Cisterns with SUB in the model code incorporate a submersible pump and an expansion vessel. All models incorporate a screened warning pipe and dip tube. Models without a C5 suffix also incorporate a screened breather. Maximum working pressure 10.0 bar. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
250902723
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Salamander pumps and salamander logo on body. Salamander pumps, model number (which indicates capacity), product information and serial number on adhesive label on body.
Installation Requirements:
R001 R008 R415 R574
Expiry date:
30/09/2030
Model:
TNK5-200-SUB, TNK5-350-SUB, TNK5-450-SUB. Type ‘AB’ air gap models: TNK5-200-SUBC5, TNK5-350-SUBC5, TNK5-450-SUBC5. Where: 200, 350, 450 indicates the stored volume of water in the tank in litres. SUB indicates that the unit includes a submersible pump for boosting the stored water in the tank.

Approval Holder:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company
Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528
General Email
lewisw@salamanderpumps.co.uk

View All Listings by this Company

Print This Approval


#241004050

DAB range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
241004050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20 litres – 42,000 litres.
Marking:
DAB, serial number & nominal capacity on adhesive label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/10/2029
Model:
DAB Esytank DAB Excell Tank

Approval Holder:
DAB Pumps
Company Name
DAB Pumps
Address
Severalls Business Park 6 Gilberd CT Highwoods Colchester
Postcode
CO4 9WN
Country
United Kingdom

View All Listings by this Company

Print This Approval


#260102703

Range of hot pressed moulded GRP sectional cold water storage cisterns. Larger cisterns are fitted with PVC roof supports and are supplied with stainless steel ladders, tie rods, braces and hatches. Cold water use only.

Section:
0135 Cisterns
Section Subtitle:
Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
260102703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
NON-POTABLE USE ONLY.
Size:
1000 litres 430,000 litres.
Marking:
Mitsubishi chemical infratec, Hishitank, capacity, model, size, serial number on label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/01/2031
Model:
GE & GSE Hishitank.

Approval Holder:
Mitsubishi Chemical Infratec Co., Ltd.
Company Name
Mitsubishi Chemical Infratec Co., Ltd.
Address
1-1, Marunouchi 1-Chome, Chiyoda-ku, Tokyo 100-8251
Country
Japan
Phone
+81-80-2683-2994
General Email
yusuke.nakao.ma@mcgc.com

View All Listings by this Company

Print This Approval


#251001702

Dudley Turbo Edge dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns and WC suites.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
251001702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” Outlet, Adjustable syphon height 7½” to 9½”.
Marking:
Dudley Turbo Edge on cap.
Installation Requirements:
R001 R556
Expiry date:
31/10/2030
Model:
Dudley Turbo Edge Adjustable Syphon.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260104705

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.

Section:
0278 Bidets and associated fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
TOTO printed on seat body. TOTO & product info on label on rear of seat.
Installation Requirements:
R001 R574
Expiry date:
31/01/2031
Model:
Neorest EW 2.0 – TCF994RWGE

Approval Holder:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#251202705

Range of bottom entry BS1212-4 (2016) delayed or non delayed action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
FLUME on float. BS1212-4 only body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
AB769 Bottom entry inlet valve with G1/2” plastic thread AB769 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#251102003

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
FLUME on float. BS1212-4 on body
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
AB772

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250904710

Range of bottom and side entry BS1212-4 (2016) compact type float operated inlet valves, for WC flushing cisterns with plastic bodies and adjustable floats and a plastic flow regulator at the inlet. Maximum operating pressure: 10 bar. Maximum operating temperature: 23°C.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250904710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 only applied to model AG104 PLUS BOTTOM.
Size:
See models.
Marking:
OLI & BS1212-4 on body.
Installation Requirements:
R001 R550 R560
Expiry date:
30/09/2030
Model:
AG104 PLUS SIDE - ½” BSP (M), AG104 PLUS VERTICAL - 3/8” Captive Nut, AG104 PLUS BOTTOM - ½” BSP (M).

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#251002022

Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251002022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
SHUN JIE, BS 1212-4, WRAS logo and datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/10/2030
Model:
F7

Approval Holder:
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Company Name
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Address
89 Malang Road, Changlingjiang Village, Mazhu Town, Yuyao City, Zhejiang

View All Listings by this Company
Manufacturer:
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Company Name
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Address
89 Malang Road, Changlingjiang Village, Mazhu Town, Yuyao City, Zhejiang

View All Listings by this Company

Print This Approval


#251202710

Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 applies to the bottom entry model only
Size:
½” BSP (M)
Marking:
NAT logo and BS1212-4 on float , datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
NA206 AG Bottom Fill Valve NA306 AG Side Fill Valve

Approval Holder:
Xiamen Nat Plumbing Inc.
Company Name
Xiamen Nat Plumbing Inc.
Address
UNIT 2, 5TH FLR. NO.18‐8 XIAFEI ROAD, HAICANG DISTRICT, 361028 XIAMEN, P. R. CHINA
Country
China
Phone
86-592-6538317

View All Listings by this Company

Print This Approval


#250402714

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with bottom entry. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250402714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Unitop logo, BS1212-4 & datum level on body.
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/04/2030
Model:
A28-06 254

Approval Holder:
Ellsi Limited
Company Name
Ellsi Limited
Postcode
DN15 8SL
Country
United Kingdom
General Email
martin@ellsi.co.uk

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company

Print This Approval


#251102048

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model M3230WR can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
Miellat, Model number & BS1212-4 on body.
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
M3230WR

Approval Holder:
Miellat Industries LLC
Company Name
Miellat Industries LLC
Address
Unit B-24, KEZAD Logistics Park, 2 Al Zaeem St, Khalifa Industrial Zone Abu Dhabi
Country
U.A.E
General Email
info@miellat.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 11

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.