Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250412002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Justlink, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – 2 – XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B. XX = DN (Dimension from 06 to 10): DN6 = 06, DN8 = 08, DN10 = 10. D = Outer braided material, SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon Braided. Inner tube material, 2 = PEX XXX = Length (15cm to 200cm) 015 = 15cm … 200 = 200cm For example: JL-09*11-08-SS-2-045 would be for F1/2 x F1/2 elbow, DN8, stainless steel braided, PEX inner tube, 45cm long. DN6 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN8 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN10 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Models with compression connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250404006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN8 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 26= F15 27= 15mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN10 bore diameter hose with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 20= M10*(12‐110) with single O‐ring or double O-ring 21= M11*(12‐110) with single O‐ring or double O-ring 22= M12*(12‐110) with single O‐ring or double O-ring 23= M14*(12‐110) with single O‐ring or double O-ring 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 35= 10mm pushfit 38= 22mm pushfit 39= 10mm pushfit isolation valve 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN13 bore diameter hose with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 24= M15*(12‐110) with single O‐ring or double O-ring 25= M16*(12‐110) with single O‐ring or double O-ring 27= 15mm smooth tube 28= 22mm smooth tube 31= 15mm compression fitting 38= 22mm pushfit 41= 15mm pushfit isolation valve 42= 22mm pushfit isolation valve DN19 bore diameter hose with the following end connections: 13= F3/4 14= F3/4 elbow 15= M3/4 16= F1 17= F1 elbow 18= M1 28= 22mm smooth tube 38= 22mm pushfit 42= 22mm pushfit isolation valve Sizes added July 2025: DN8 09= F1/2 10= F1/2 wing nut 29= 10mm compression fitting 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN10 09= F1/2 10= F1/2 wing nut 30= 12mm compression fitting 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 36= 12mm pushfit 37= 15mm pushfit 40= 12mm pushfit isolation valve DN13 09= F1/2 10= F1/2 wing nut 32= 22mm compression fitting 33= 15mm isolation valve 34= 22mm isolation valve 37= 15mm pushfit Dn19 32 = 22mm Compression fitting 34 = 22mm isolation valve

Marking:

Justlink, WRAS, ‘it’ and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – Eit – XXX A*B denotes connection size and type and is replaced with a two digit number (please refer to size). XX denotes bore diameter of hose and is replaced with a two digit number (please refer to size). D denotes the outer braided material and is replaced with: SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon wire. E denotes the liner material and is replaced with 1 for EPDM. XXX denotes the length of the hose between 15cm & 200cm and is replaced with a number.

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of vertical cased and insulated direct and indirect unvented stainless steel hot water storage cylinders. Fitted with a Caleffi 309463 GLD temperature and pressure relief valve sat at 6 bar & 90°C, and supplied with an inlet control group consisting of in-line pressure reducing valve (Caleffi set at 3 bar) and pressure relief valve (Caleffi CWIC200055) set at 4.5 bar, and incorporates a stainless-steel mesh and an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2), expansion vessel and filling loop. Maximum working pressure 4.4 bar. Maximum operating temperature 99°C.

Section:

1890 Unvented Heating Apparatus

Size:

28mm compression.

Marking:

Ideal Heating, Manufacturers name, address, date of manufacturer, capacity, model no, serial no, pressure and technical information on adhesive label on body.

Installation Requirements:

R001 R140 R360 R511 R530

Expiry date:

31/05/2028

Model:

IDEPLUHP150DUOPPSZSL & IDEPLUHP180DUOPPSZSL. 475mm diameter 150, 180, litre; single coil cylinders on top of a buffer cylinder for coupling with a range of heat pumps 5kW to 14kW; Pre-plumbed and pre-wired; single zone

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Range of air venting valves with blue epoxy coated ductile iron or plastic bodies with plastic floats. Maximum working pressure 16.0 Bar. Cold water use only.

Section:

1980 Valves

Section Subtitle:

Air venting. Fittings in this section are suitable for above ground installations only.

WRAS Approval Number:

250702040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” - 6” BSPT (M) & DN150 - 200 flanged

Marking:

A.R.I, Aquestia logo and product information on adhesive label on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

D-040 C 3/4" ,1",2". D-040 L 3/4" ,1",2". D-040 3/4" ,1",2". D-43 NS 2", 3",4",6" (DN150 flanged),8" (DN200 flanged). D-43 2", 3",4",6" (DN150 flanged),8" (DN200 flanged). D-46 2",3",4",6" (DN150 flanged). D-46 NS 2",3",4",6" (DN150 flanged). S-050 1/2",3/4",1". S-050-C 1/2",3/4",1". S-050 L 1/2",3/4",1". S-052 1/2",3/4",1". NS- Non Slam L- Long C- Casted (cover with casted cup).

Manufacturer:

Aquestia Ltd.

Company Name

Aquestia Ltd.

Address

Kfar Charouv Ramat Hagolan

Postcode

12932000

Country

Israel

View All Listings by this Company

Range of wall mounted, concealed, thermostatic shower valves with (brass bodies – various trim set finishes. Incorporating a quarter turn ceramic disc headwork which controls the flow using dome type operating member. Temperature is controlled independently via a thermostatic cartridge also using a dome type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250402031

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

To be used with rough set 15896180 which has 1/2" BSP (F) inlets

Marking:

Hansgrohe logo on face plate, Hansgrohe logo on valve body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

15896180 15872000 15872670 15874000 15874670 15838000 15838670 15847000 15847670

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Model added February 2026: RP3 SAI SHCDIV C

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Model OP TS3650TO ELC - Wall mounted concealed. Wall Mounted Exposed - All other Models Inlets incorporate servicing valves and approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/05/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Wall mounted, thermostatic shower valve (chromium plated brass) for use with copper pipe (manufactured to BS EN 1057). The flow is controlled by a quarter turn ceramic disc headwork with either a dome or lever type operating member. The temperature is controlled by a thermostatic cartridge with either a dome or lever type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602032

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

Intatec logo and model on rear of body

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

ST20010CP & ST20010PH Coolflow

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Range of wall mounted thermostatic blending valves with brass bodies (various finishes). Incorporating either 2-way ceramic disc diverters (2 on, 1 off) that also controls the flow (model DB3100.a.bbb) or with a ceramic disc headwork that controls the flow only to a single outlet (model DB3200.a.bbb.). Both incorporate lever type operating members. The temperature is controlled independently via a thermostatic cartridge with lever type operating members. Inlets incorporate approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250608013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dolphin Solutions Limited logo on faceplate and flow arrow body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Model:

DB3100.a.bbb, DB3200.a.bbb. ‘a’ identifies the external finish to the metal parts from ‘DB3x00.1.bbb’ to DB3x00.9.bbb’: ‘.1’ denotes brushed/satin polished. ‘.2’ denotes mirror polished. ‘.3’ denotes brushed/satin polished with PVD coating. ‘.4’ denotes mirror polished with PVD coating. ‘.5’ denotes powder coated. ‘.6 - .9’ to denote other material and finish options that may be available in the future. ‘bbb’ indicates the colour of PVD or powder coat that has been applied from ‘DB3x00.a.01’ to DB3x00.a.999’. Can be either two or three digits.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall Mounted Inlets incorporate stainless steel strainers and an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

31/07/2030

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company