Range of Wall mounted, four-hole, single outlet (swivel) combination tap assemblies (Various Finishes). Incorporating a ceramic cartridge headwork controlling the flow to the shower handset and two quarter turn ceramic disc headworks controlling the flow to the spout outlet, all with single lever operating members. The spout outlets incorporate a plastic aerator. The inlet to the shower handsets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

240702063

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless Steel braided PEX lined flexible hose assemblies with ½” BSP captive nut end connecitons

Marking:

Vola logo on operating member

Installation Requirements:

R001 R010 R040

Expiry date:

31/07/2029

Model:

VOLA BK10 VOLA BK10A VOLA BK10B VOLA BK12 VOLA BK12A VOLA BK12B Model VOLA BK10, VOLA BK10A, VOLA BK10B, VOLA BK12, VOLA BK12A & VOLA BK12B Brass and Stainless Steel are available with different surface. finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold. Differences in the models: VOLA BK10, BK12 – Mixer with Adjustable Bracket and water collection box VOLA BK10A, BK12A – Mixer with Bracket VOLA BK12B, BK12B – Mixer Alone VOLA BK10, BK10A, BK10B – mixer with double swivel spout VOLA 090D-XX and mixer with hand shower VOLA BK12, BK12A, BK12B –mixer with swivel spout VOLA 090E-XX and mixer with hand shower

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of combined bath filler, waste and overflow assemblies (in various finishes with a plastic body). The outlets incorporate plastic aerator. Maximum operating temperature 60°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

240704023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M

Marking:

Hansgrohe on face plate.

Installation Requirements:

R001 R160 R576

Expiry date:

31/07/2029

Model:

58 123 xx0 58 125 180 58 126 180 58 127 xx0 58 128 xx0

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted spout outlets, (brass bodies - various finishes), supplied with cross top or single lever operating members and trim sets. The spout outlet incorporates a plastic aerator. This product is supplied with a click type waste (not verified by test). Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240588005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

1/2" BSP (M)

Marking:

Waterworks on spout outlet.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

DS60LS (Cross top), DS70LS (Lever). Finishes available: Brass, Chrome, Nickel, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold.

Approval Holder:

Waterworks

Company Name

Waterworks

Address

10 John Street London

Postcode

WC1N2EB

Country

United Kingdom

View All Listings by this Company

Range of stainless-steel expansion bellows with either threaded or flanged end connections. Maximum working pressure JP115: 10.0 bar & JP116VS: 16.0 bar. Maximum operating temperature JP115: 82oC & JP116VS: 100°C.

Section:

0870 Tubes

Section Subtitle:

Stainless Steel.

WRAS Approval Number:

240704051

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

JP115: Stourflex JP115 on ferrule end of BSP connections. JP116VS: Stourflex JP116VS on flanged end.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

JP115 Range - Stainless Steel Axial Expansion Joints With S/S BSPT Male Ends - DN15-DN80 (1/2” BSPT (M) - 3” BSPT (M)). JP116VS Range - Stainless Steel Axial Expansion Joints With Carbon Steel Vanstone Swivel NP16 Flanged End Connections (DN32-DN300).

Approval Holder:

Stourflex Ltd

Company Name

Stourflex Ltd

Address

Junction Road Audnam Stourbridge

Postcode

DY8 4YH

Country

United Kingdom

Phone

+441384 393 329

General Email

james.croydon@stourflex.co.uk

View All Listings by this Company

Range of chemical dosing equipment. The outlet of the injector incorporates a connection for injection of chemicals via venturi action. Max operating pressure 5.9 bar. Cold water only

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

240704714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Only suitable for use with chemicals no greater than a FC3, additional backflow protection is required for chemicals greater than FC3. When used where the risk is greater than FC3, IRN 415 applies.

Size:

¾” BSP (F) Captive nut

Marking:

HYDRO on front panel.

Installation Requirements:

R001 R040 R160

Expiry date:

31/07/2029

Model:

HYDSP0121 LiquidSense Pro HYDSP0122 LiquidSense Pro HYDSP0123 LiquidSense Pro HYDSP6347 Penguin Pro HYDSP6348 Penguin Pro HYDSP6997 Penguin HYD85125GB EvoDose HYD850353GB EvoDose HYD859411GB EvoDose HYD39111GB Accudose 2 HYD39101GB Accudose 2

Approval Holder:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

Manufacturer:

PSG Hydro

Company Name

PSG Hydro

Address

Hochstrasse 150-152 47228 Duisburg

Country

Germany

View All Listings by this Company

In-line water filter and housing with polypropylene body. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” pushfit

Marking:

PROBOIL, model and technical information on adhesive label on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/08/2029

Model:

PT1201RMC, PT1204, PT1206, HK1076 & HK1077 INLINE WATER FILTER AND HOUSING

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Range of PFD press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404060

Size:

see models

Marking:

PFD & size etched on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

60111515 15mm Pressfit Coupler 60112222 22mm Pressfit Coupler 60112828 28mm Pressfit Coupler 60113535 35mm Pressfit Coupler 60114242 42mm Pressfit Coupler 60115454 54mm Pressfit Coupler 60171515 15mm Pressfit Slip Coupler 60172222 22mm Pressfit Slip Coupler 60172828 28mm Pressfit Slip Coupler 60173535 35mm Pressfit Slip Coupler 60174242 42mm Pressfit Slip Coupler 60175454 54mm Pressfit Slip Coupler 60411515 15mm Pressfit Elbow 60412222 22mm Pressfit Elbow 60412828 28mm Pressfit Elbow 60413535 35mm Pressfit Elbow 60414242 42mm Pressfit Elbow 60415454 54mm Pressfit Elbow 60431515 15mm Pressfit Street Elbow 60432222 22mm Pressfit Street Elbow 60432828 28mm Pressfit Street Elbow 60433535 35mm Pressfit Street Elbow 60434242 42mm Pressfit Street Elbow 60435454 54mm Pressfit Street Elbow 60451515 15mm Pressfit Obtuse Elbow 60452222 22mm Pressfit Obtuse Elbow 60452828 28mm Pressfit Obtuse Elbow 60453535 35mm Pressfit Obtuse Elbow 60454242 42mm Pressfit Obtuse Elbow 60455454 54mm Pressfit Obtuse Elbow 60481515 15mm Pressfit Obtuse Street Elbow 60482222 22mm Pressfit Obtuse Street Elbow 60482828 28mm Pressfit Obtuse Street Elbow 60483535 35mm Pressfit Obtuse Street Elbow 60484242 42mm Pressfit Obtuse Street Elbow 60485454 54mm Pressfit Obtuse Street Elbow 60132215 22 x 15mm Pressfit Fitting Reducing 60132815 28 x 15mm Pressfit Fitting Reducing 60132822 28 x 22mm Pressfit Fitting Reducing 60133515 35mm x 15mm Pressfit Fitting Reducing 60133522 35 x 22mm Pressfit Fitting Reducing 60133528 35 x 28mm Pressfit Fitting Reducing 60134215 42 x 15mm Pressfit Fitting Reducing 60134222 42 x 22mm Pressfit Fitting Reducing 60134228 42 x 28mm Pressfit Fitting Reducing 60134235 42 x 35mm Pressfit Fitting Reducing 60135415 54 x 15mm Pressfit Fitting Reducing 60135422 54 x 22mm Pressfit Fitting Reducing 60135428 54 x 28mm Pressfit Fitting Reducing 60135435 54 x 35mm Pressfit Fitting Reducing 60135442 54 x 42mm Pressfit Fitting Reducing 60151515 15x15x15 mm Pressfit Equal Tee 60222222 22x22x22 mm Pressfit Equal Tee 60282828 28x28x28 mm Pressfit Equal Tee 60353535 35x35x35 mm Pressfit Equal Tee 60424242 42x42x42 mm Pressfit Equal Tee 60545454 54x54x54 mm Pressfit Equal Tee 60222215 22x22x15 mm Pressfit Reducing Tee 60282815 28x28x15 mm Pressfit Reducing Tee 60282822 28x28x22 mm Pressfit Reducing Tee 60353515 35x35x15 mm Pressfit Reducing Tee 60353522 35x35x22 mm Pressfit Reducing Tee 60353528 35x35x28 mm Pressfit Reducing Tee 60424215 42x42x15 mm Pressfit Reducing Tee 60424222 42x42x22 mm Pressfit Reducing Tee 60424228 42x42x28 mm Pressfit Reducing Tee 60424235 42x42x35 mm Pressfit Reducing Tee 60545415 54x54x15 mm Pressfit Reducing Tee 60545422 54x54x22 mm Pressfit Reducing Tee 60545428 54x54x28 mm Pressfit Reducing Tee 60545435 54x54x35 mm Pressfit Reducing Tee 60545442 54x54x42 mm Pressfit Reducing Tee 60221522 22x15x22 mm Pressfit Reducing Tee 60221515 22x15x15 mm Pressfit Reducing Tee 60282222 28x22x22 mm Pressfit Reducing Tee 60282228 28x22x28 mm Pressfit Reducing Tee 60151522 15x15x22 mm Pressfit Reducing Tee 60811515 15mm Pressfit End Cap 60812222 22mm Pressfit End Cap 60812828 28mm Pressfit End Cap 60813535 35mm Pressfit End Cap 60814242 42mm Pressfit End Cap 60815454 54mm Pressfit End Cap 60112215 22 x 15mm Pressfit Reducing Coupler 60112815 28 x 15mm Pressfit Reducing Coupler 60112822 28 x 22mm Pressfit Reducing Coupler 60113515 35 x 15mm Pressfit Reducing Coupler 60113522 35 x 22mm Pressfit Reducing Coupler 60113528 35 x 28mm Pressfit Reducing Coupler 60114215 42 x 15mm Pressfit Reducing Coupler 60114222 42 x 22mm Pressfit Reducing Coupler 60114228 42 x 28mm Pressfit Reducing Coupler 60114235 42 x 35mm Pressfit Reducing Coupler 60115415 54 x 15mm Pressfit Reducing Coupler 60115422 55 x 22mm Pressfit Reducing Coupler 60115428 56 x 28mm Pressfit Reducing Coupler 60115435 54 x 35mm Pressfit Reducing Coupler 60115442 54 x 42mm Pressfit Reducing Coupler 60291515 15MM Pressfit Full Crossover 60292222 22MM Pressfit Full Crossover 60271515 15MM Pressfit Part Crossover 60272222 22MM Pressfit Part Crossover 60422215 22mm x 15mm Pressfit Reducing Elbow 60422815 28 x 15mm Pressfit Reducing Elbow 60422822 28mm x 22mm Pressfit Reducing Elbow

Approval Holder:

PressFit Direct Ltd.

Company Name

PressFit Direct Ltd.

Address

10 Aylesbury Court Lapworth

Postcode

B94 6BE

View All Listings by this Company

‘ZL’ range of U profile press fittings (nickel plated brass bodies) for use with ‘ZL’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704717

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

Zhongliang and size on crimp of the body Zhongliang and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union ZL-KY101-S1616 S16X16 ZL-KY101-S2020 S20X20 ZL-KY101-S2525 S25X25 ZL-KY101-S3232 S32X32 Unequal Straight Union ZL-KY102-S2016 S20X16 ZL-KY102-S2516 S25X16 ZL-KY102-S2520 S25X20 ZL-KY102-S3216 S32X16 ZL-KY102-S3220 S32X20 ZL-KY102-S3225 S32X25 Male Straight Union ZL-KY103-S1612M S 16X1/2M ZL-KY103-S1634M S 16X3/4M ZL-KY103-S2012M S 20X1/2M ZL-KY103-S2034M S 20X3/4M ZL-KY103-S2512M S 25X1/2M ZL-KY103-S2534M S 25X3/4M ZL-KY103-S2511M S25X1M ZL-KY103-S3234M S 32X3/4M ZL-KY103-S3211M S 32X1M Female Straight Union ZL-KY104-S1612F S 16X1/2 F ZL-KY104-S1634F S 16X3/4 F ZL-KY104-S2012F S 20X1/2 F ZL-KY104-S2034F S 20X3/4 F ZL-KY104-S2534F S 25X3/4 F ZL-KY104-S2511F S 25X1 F ZL-KY104-S3234F S 32X3/4 F ZL-KY104-S3211F S 32X1 F Swivel Coupling ZL-KY105-1612F 16X1/2F ZL-KY105-2012F 20X1/2F ZL-KY105-2034F 20X3/4F ZL-KY105-2534F 25X3/4F Equal Elbow ZL-KY106-L1616 L 16X16 ZL-KY106-L2020 L 20X20 ZL-KY106-L2525 L 25X25 ZL-KY106-L3232 L 32X32 Female Elbow ZL-KY107-L1612F L 16X1/2 F ZL-KY107-L1634F L 16X3/4 F ZL-KY107-L2012F L 20X1/2 F ZL-KY107-L2034F L 20X3/4 F ZL-KY107-L2534F L 25X3/4 F ZL-KY107-L2511F L 25X1 F ZL-KY107-L3211F L 32X1 F Male Elbow ZL-KY108-L1612M L16x1/2M ZL-KY108-L2012M L20x1/2M ZL-KY108-L2034M L20X3/4M ZL-KY108-L2534M L25x3/4M ZL-KY108-L3211M L32x1M Swivel Elbow ZL-KY109-1612F 16X1/2F ZL-KY109-2034F 20X3/4F Equal Tee ZL-KY110-T161616 T 16X16X16 ZL-KY110-T202020 T 20X20X20 ZL-KY110-T252525 T 25X25X25 ZL-KY110-T323232 T 32X32X32 Unequal Tee ZL-KY111-T162016 T 16X20X16 ZL-KY111-T201616 T 20X16X16 ZL-KY111-T201620 T20X16X20 ZL-KY111-T202016 T20X20X16 ZL-KY111-T251625 T 25X16X25 ZL-KY111-T252516 T 25X25X16 ZL-KY111-T251616 T25X16X16 ZL-KY111-T252020 T 25X20X20 ZL-KY111-T252025 T 25X20X25 ZL-KY111-T321632 T32X16X32 ZL-KY111-T322032 T32X20X32 ZL-KY111-T322525 T32X25X25 ZL-KY111-T322532 T32X25X32 Female Tee ZL-KY112-T2512F25 T25X1/2FX25 Elbow With Plate-Male ZL-KY114-1612M 16X1/2M ZL-KY114-1634M 16X3/4 M ZL-KY114-2034M 20X3/4 M Elbow with Plate-Female ZL-KY115-1612F 16X1/2 F ZL-KY115-1634F 16X3/4F ZL-KY115-2012F 20X1/2F ZL-KY115-2034F 20X3/4F End cap ZL-KY116-16 16 ZL-KY116-20 20 ZL-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. BWRB1620100 16*2.0 BWRB2020200 20*2.0 BTRB2525100 25*2.5 BTRB3230100 32*3.0

Approval Holder:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Manufacturer:

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name

Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Address

122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City

Country

China

View All Listings by this Company

Range of M profile press fit fittings with a brass body and NBR O-rings, for use with copper pipe manufactured to EN1057 and stainless-steel pipe manufactured to EN10312. Maximum working pressure: 10 Bar. Maximum operating temperature: 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

E logo and size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Straight adaptor - Press fit x Female: 2PSFe1501 - 15MM x 1/2" (F) BSP, 2PSFe1502 - 15MM x 3/4" (F) BSP, 2PSFe2201 - 22MM x 1/2" (F) BSP, 2PSFe2202 - 22MM x 3/4" (F) BSP, 2PSFe2203 - 22MM x 1" (F) BSP, 2PSFe2802 - 28MM x 3/4" (F) BSP, 2PSFe2803 - 28MM x 1" (F) BSP, 2PSFe3503 - 35MMx 1" (F) BSP, 2PSFe3504 - 35MM X 11/4" (F) BSP, 2PSFe4205 - 42MM X 11/2" (F) BSP, 2PSFe5406 - 54MM X 2" (F) BSP. Straight adaptor - Press fit x Male: 2PSKe1501 - 15MM X 1/2" (M) BSP, 2PSKe1502 - 15MM X 3/4"(M) BSP, 2PSKe2201 - 22MM X 1/2" (M) BSP, 2PSKe2202 - 22MM X 3/4" (M) BSP, 2PSKe2203 - 22MM X 1" (M) BSP, 2PSKe2802 - 28MM X 3/4" (M) BSP, 2PSKe2803 - 28MM X 1" (M) BSP, 2PSKe3503 - 35MM X 1" (M) BSP, 2PSKe3504 - 35MM X 11/4" (M) BSP, 2PSKe4205 - 42MM X 11/2" (M) BSP, 2PSKe5406 - 54MM X 2" (M) BSP. Straight adaptor - Press fit x Swivel Female: 2PSQe1501 - 15MM X 1/2" (F) BSP SWIVEL, 2PSQe1502 - 15MM X 3/4" (F) BSP SWIVEL, 2PSQe2202 - 22MM X 3/4" (F) BSP SWIVEL, 2PSQe2203 - 22MM X 1" (F) BSP SWIVEL, 2PSQe2803 - 28MM X 1" (F) BSP SWIVEL, 2PSQe2804 - 28MM X 11/4" (F) BSP SWIVEL. Straight pipe union coupling - Press fit x Female/Male: 2PSHe1501 - 15MM X 1/2" (M) BSP UNION, 2PSHe2202 - 22MM X 3/4" (M) BSP UNION, 2PSHe2803 - 28MM X 1" (M) BSP UNION, 2PSHe3504 - 35MM X 1 1/4" (M) BSP UNION, 2PSHe4205 - 42MM X 1 1/2" (M) BSP UNION, 2PSHe5406 - 54MM X 2" (M) BSP UNION, 2PSGe1501 - 15MM X 1/2" (F) BSP UNION, 2PSGe2202 - 22MM X 3/4"(F) BSP UNION, 2PSGe2803 - 28MM X 1"(F) BSP UNION, 2PSGe3504 - 35MM X 1 1/4" (F) BSP UNION, 2PSGe4205 - 42MM X 1 1/2"(F) BSP UNION, 2PSGe5406 - 54MM X 2"(F) BSP UNION. 90°Elbow adaptor- Press fit x Female/Male: 2PSFe1501E - 15MM X 1/2" (F) BSP, 2PSFe2202E - 22MM X 3/4" (F) BSP, 2PSFe2803E - 28MM X 1" (F) BSP, 2PSKe1501E - 15MM X 1/2" (M) BSP, 2PSKe2202E - 22MM X 3/4" (M) BSP, 2PSKe2803E - 28MM X 1" (M) BSP. Elbow Wall Plate - Press fit x Female: 2PSRe1501 - 15MM X 1/2" (F) BSP. Branch Tee: Press fit x Female x Press fit: 2PSJe151501 - 15MM X 15MM X 1/2" (F) BSP, 2PSJe222201 - 22MM X 22MM X 1/2" (F) BSP, 2PSJe222202 - 22MM X 22MM X 34" (F) BSP, 2PSJe282801 - 28MM X 28MM X 1/2" (F) BSP, 2PSJe282802 - 28MM X 28MM X 3/4" (F) BSP, 2PSJe353501 - 35MM X 35MM X 1/2" (F) BSP, 2PSJe424201 - 42MM X 42MM X 1/2" (F) BSP, 2PSJe545401 - 54MM X 54MM X 1/2" (F) BSP.

Approval Holder:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240702052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models.

Marking:

Tectite 316 & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Manufacturer:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company