Directory Search Results

Print List

#240904726

‘PREMIX’ range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The supplies to both the domestic hot water and primary circuit are controlled via spherical valves. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 80°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
240904726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression (Primary Circuit) 15mm compression (Secondary Circuit)
Marking:
E.C.A. on front cover. E.C.A, model and technical information including KW rating on adhesive label on body.
Installation Requirements:
R001 R360
Expiry date:
30/09/2029
Model:
8116350010 CALORA PREMIX 24 HM ERP UK 8116484110 CALORA PREMIX 14 HM ERP UK 8116487110 CALORA PREMIX 20 HM ERP UK 8116356010 CALORA PREMIX 28 HM ERP UK 8116389010 CITIUS PREMIX 14 HM ERP UK 8116392010 CITIUS PREMIX 20 HM ERP UK 8116353010 CITIUS PREMIX 24 HM ERP UK 8116380010 CITIUS PREMIX 28 HM ERP UK 8116576110 Proteus Premix 42 HM DG ERP UK 8116550010 Proteus Premix 45 HM DG ERP UK

Approval Holder:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company
Manufacturer:
Emas Makina Sanayi A.S.
Company Name
Emas Makina Sanayi A.S.
Address
Mustafa Kemal Blv. No:13 Keçiliköy Osb/Yunusemre Manisa
Postcode
45030
Country
Turkey
General Email
egecakmakci@emas.com.tr

View All Listings by this Company

Print This Approval


#240904008

Range of ultrasonic remote transmission water meters with stainless steel body. The products incorporate a single check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) & 1” BSP (M) Size added October & November 2024 ¾” BSP (M)
Marking:
Manufacturer’s logo, model, WRAS, flow arrow. Date of manufacture (MM/YY) and technical info on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
LXCY-15 & LXCY-25 Model added October 2024 LXCY-20 3/4" BSP (M) Model added November 2024: LXCY_20 : 3/4" BSP (M)

Approval Holder:
Sanchuan Wisdom Technology Co., Ltd.
Company Name
Sanchuan Wisdom Technology Co., Ltd.
Address
Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company
Manufacturer:
Sanchuan Wisdom Technology Co., Ltd.
Company Name
Sanchuan Wisdom Technology Co., Ltd.
Address
Sanchuan Hydraulic Industrial Park, Longgang Section, Hi-Tech Development Zone, Yingtan, Jiangxi, P.R.China

View All Listings by this Company

Print This Approval


#240902708

`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot inlet x 1/2" BSP (M) outlet
Marking:
Y Stern logo on sensor unit
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240904713

Range of leak detection devices incorporating a DZR brass body and non-return valve (not intended for and not suitable for backflow protection). Models Stopleak 1 & Stopleak 2 incorporate a spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
240904713
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
This product has not been tested or approved for leak detection claims made by the approval holder.
Size:
Please refer to model.
Marking:
RBM, flow arrow, PN & CR on body. RBM and product info on control unit.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Stopleak 1: ¾” BSP (M) Stopleak 2: 1” BSP (M) Stopleak 3: 1” BSP (M) x ¾” BSP (M) reducer

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#240988010

Range of wall brackets (brass bodies – various finishes). Open outlet use only Maximum working temperature 85°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
PPI on flange
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
N116-L XXX N116-P XXX XXX Denotes different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240704056

Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M).
Marking:
Company logo, Made in Italy, temperature and pressure cast on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
54DM15000 & 54DM15000XX Stopshock xx (Packaging variation)

Approval Holder:
Barberi Rubinetterie Industriali Srl
Company Name
Barberi Rubinetterie Industriali Srl
Address
Via Monte Fenera 7 13018 Valduggia Italy
Phone
+39 163 48 284
General Email
barberi@barberi.it

View All Listings by this Company

Print This Approval


#240904711

Range of single stage booster pumps incorporating a flow switch. Model 46349 CH 12-14 B is supplied with a pressure vessel and incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a strainer and stainless-steel braided EPDM lined flexible connection hoses. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240904711
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Stuart Turner and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/09/2029
Model:
46387 CH 9-14 FL CH Single Stage Automatic Flow Switch: 1” BSP (M). 46349 CH 12-14 B CH Single Stage Boostamatic: 1” BSP (F).

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company
Manufacturer:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#2301103

Shower handset with plastic body. Maximum operating temperature 85C Open outlet use only

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301103
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Aqualisa on body
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
704314 65MM SINGLE MODE HANDSET AL064 - SQUARE

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#240903005

Chrome plated brass shower handset. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240903005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
HERITAGE ON THE HANDSET
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
THC24 THA24

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240903009

Shower outlet kit, consisting of chromium plated ABS shower handset and PVC lined shower hose. The kit is also supplied with a riser rail and handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240903009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
BRISTAN on the Handset
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
CAS KIT05 C KIT106 C HAND22 C HAND102 C 144364

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 651 of 1043

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.