Directory Search Results

Print List

#240602072

Copper press-fit fittings with copper with EPDM `O`-rings. For use with copper pipe manufactured in accordance with BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240602072
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Sizes are in mm Pressfit
Marking:
KEMPRESS, SANHA, the letter of "K-Tick", DVGW, & size on fitting body.
Installation Requirements:
R001
Expiry date:
30/06/2029
Model:
Copper Fitting (CW024A) J07000 15mm 90°Elbow (Female / Female) J07001 22mm 90° Elbow (Female / Female) J07002 28mm 90° Elbow (Female / Female) J07003 35mm 90° Elbow (Female / Female) J07004 42mm 90° Elbow (Female / Female) J07005 54mm 90° Elbow (Female / Female) J07180 67mm 90° Elbow (Female / Female) J07181 76mm 90° Elbow (Female / Female) J07182 108mm 90° Elbow (Female / Female) J07006 15mm 90°Elbow (Male / Female) J07007 22mm 90°Elbow (Male / Female) J07008 28mm 90°Elbow (Male / Female) J07009 35mm 90°Elbow (Male / Female) J07010 42mm 90°Elbow (Male / Female) J07011 54mm 90°Elbow (Male / Female) J07012 15mm 45°Elbow (Female / Female) J07013 22mm 45°Elbow (Female / Female) J07014 28mm 45°Elbow (Female / Female) J07015 35mm 45°Elbow (Female / Female) J07016 42mm 45°Elbow (Female / Female) J07017 54mm 45°Elbow (Female / Female) J07201 67mm 45°Elbow (Female / Female) J07202 76mm 45°Elbow (Female / Female) J07237 108mm 45°Elbow (Female / Female) J06998 15mm 45°Elbow (Male / Female) J06999 22mm 45°Elbow (Male / Female) J07018 28mm 45°Elbow (Male / Female) J07019 35mm 45°Elbow (Male / Female) J07020 42mm 45°Elbow (Male / Female) J07022 54mm 45°Elbow (Male / Female) J07023 15mm Connector (Female / Female) J07024 22mm Connector (Female / Female) J07025 28mm Connector (Female / Female) J07026 35mm Connector (Female / Female) J07027 42mm Connector (Female / Female) J07028 54mm Connector (Female / Female) J07210 67mm Connector (Female / Female) J07211 76mm Connector (Female / Female) J07212 108mm Connector (Female / Female) J07029 15mm Connector Slip (Female / Female) J07030 22mm Connector Slip (Female / Female) J07031 28mm Connector Slip (Female / Female) J07032 35mm Connector Slip (Female / Female) J07033 42mm Connector Slip (Female / Female) J07034 54mm Connector Slip (Female / Female) J07224 67mm Connector Slip (Female / Female) J07225 76mm Connector Slip (Female / Female) J07068 22X15mm Bushing (Male / Female) J07069 28X15mm Bushing (Male / Female) J07070 28X22mm Bushing (Male / Female) J07071 35X22mm Bushing (Male / Female) J07072 35X28mm Bushing (Male / Female) J07073 42X22mm Bushing (Male / Female) J07074 42X28mm Bushing (Male / Female) J07131 42X35mm Bushing (Male / Female) J07075 54X35mm Bushing (Male / Female) J07076 54X42mm Bushing (Male / Female) J07103 67X28mm Bushing (Male / Female) J07220 67X35mm Bushing (Male / Female) J07221 67X42mm Bushing (Male / Female) J07200 67X54mm Bushing (Male / Female) J07104 76X35mm Bushing (Male / Female) J07105 76X42mm Bushing (Male / Female) J07222 76X54mm Bushing (Male / Female) J07223 76X67mm Bushing (Male / Female) J07215 108X42mm Bushing (Male / Female) J07216 108X54mm Bushing (Male / Female) J07217 108X64mm Bushing (Male / Female) J07218 108X67mm Bushing (Male / Female) J07219 108X76mm Bushing (Male / Female) J07057 22X15mm Reducer (Female / Female) J07058 22X18mm Reducer (Female / Female) J07059 28X15mm Reducer (Female / Female) J07158 28X22mm Reducer (Female / Female) J07060 35X22mm Reducer (Female / Female) J07061 35X28mm Reducer (Female / Female) J07062 42X22mm Reducer (Female / Female) J07063 42X28mm Reducer (Female / Female) J07064 42X35mm Reducer (Female / Female) J07065 54X28mm Reducer (Female / Female) J07066 54X35mm Reducer (Female / Female) J07067 54X42mm Reducer (Female / Female) J07035 15mm Tee - Equal (Female / Female / Female) J07036 22mm Tee - Equal (Female / Female / Female) J07037 28mm Tee - Equal (Female / Female / Female) J07038 35mm Tee - Equal (Female / Female / Female) J07039 42mm Tee - Equal (Female / Female / Female) J07040 54mm Tee - Equal (Female / Female / Female) J07206 67mm Tee - Equal (Female / Female / Female) J07186 76mm Tee - Equal (Female / Female / Female) J07203 108mm Tee - Equal (Female / Female / Female) J07041 22X15X15mm Tee- Reducing (Female / Female / Female) J07042 22X15X22mm Tee- Reducing (Female / Female / Female) J07043 22X22X15mm Tee- Reducing (Female / Female / Female) J07044 28X15X28mm Tee- Reducing (Female / Female / Female) J07045 28X22X28mm Tee- Reducing (Female / Female / Female) J07046 35X15X35mm Tee- Reducing (Female / Female / Female) J07047 35X22X35mm Tee- Reducing (Female / Female / Female) J07048 35X28X35mm Tee- Reducing (Female / Female / Female) J07049 42X22X42mm Tee- Reducing (Female / Female / Female) J07050 42X28X42mm Tee- Reducing (Female / Female / Female) J07051 42X35X42mm Tee- Reducing (Female / Female / Female) J07052 54X22X54mm Tee- Reducing (Female / Female / Female) J07053 54X28X54mm Tee- Reducing (Female / Female / Female) J07054 54X35X54mm Tee- Reducing (Female / Female / Female) J07055 54X42X54mm Tee- Reducing (Female / Female / Female) J07207 67X28X67mm Tee- Reducing (Female / Female / Female) J07190 67X35X67mm Tee- Reducing (Female / Female / Female) J07208 67X42X67mm Tee- Reducing (Female / Female / Female) J07191 67X54X67mm Tee- Reducing (Female / Female / Female) J07192 76X22X67mm Tee- Reducing (Female / Female / Female) J07193 76X28X76mm Tee- Reducing (Female / Female / Female) J07209 76X35X76mm Tee- Reducing (Female / Female / Female) J07194 76X42X76mm Tee- Reducing (Female / Female / Female) J07213 76X54X76mm Tee- Reducing (Female / Female / Female) J07195 76X67X76mm Tee- Reducing (Female / Female / Female) J07196 108X54X108mm Tee- Reducing (Female / Female / Female) J07205 108X67X108mm Tee- Reducing (Female / Female / Female) J07197 108X76X108mm Tee- Reducing (Female / Female / Female) J07242 35mm Cu End Cap J07243 42mm Cu End Cap J07244 54mm Cu End Cap J07226 67mm Cu End Cap J07227 76mm Cu End Cap J07228 108mm Cu End Cap

Approval Holder:
Kembla (HK) Limited
Company Name
Kembla (HK) Limited
Country
China
Phone
+852 2833 9308
General Email
charles.tam@kembla.com.hk

View All Listings by this Company

Print This Approval


#2207402

FLOMASTA range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2207402
Note:
For above and below ground use
Size:
20mm – 63mm.
Marking:
Flomasta, WRAS, PN & size on nut.
Installation Requirements:
R001
Expiry date:
31/07/2027
Model:
FLOMASTA compression fittings 20-63mm 320*****U ADAPTOR MALE FLOMASTA 320A*****U ADAPTOR FEMALE FLOMASTA 320B*****U END PLUG FLOMASTA 320C*****U FLANGED ADAPTOR FLOMASTA 320D*****U FLANGED ADAPTOR (4 BOLTS)FLOMASTA 321******U COUPLING FLOMASTA 321A*****U REDUCING COUPLING FLOMASTA 321B*****U REPAIR COUPLING FLOMASTA 322******U ELBOW 90 FLOMASTA 322A*****U ELBOW THREADED MALE FLOMASTA 322C*****U ELBOW FEMALE for POP-UP FLOMASTA 322B*****U ELBOW THREADED FEMALE FLOMASTA 322D*****U WALL ELBOW COMPRESSION FLOMASTA 323******U TEE THREADED FEMALE FLOMASTA 323A*****U TEE THREADED MALE FLOMASTA 324******U TEE 90° ELYSEE FLOMASTA 324A*****U TEE REDUCING FLOMASTA 321C*****U UNIVERSAL ADAPTOR FLOMASTA Where XXX-YYY-ZZZ for product family cocdes with only 3 digits 330 (standard code prefix) – yyy (1st end diameter) -zzz (2nd end diameter) Xxx(x)-yyy-zz for product family codes with e altter as a firth digit 330A (A standard code) – (063) yyy diameter – (06) zz threaded diameter.

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#241002051

Range of system 2000 of flange adaptors and connectors with ductile iron bodies (Blue Epoxy Coated) incorporating EPDM seals. For use with PE pipe manufactured to En 12201 & PVC Pipe manufactured to DIN 8062. Maximum working pressure: 16.0Bar Cold water use only.

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
241002051
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models below
Marking:
Hawle logo and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
System 2000 Range: 0400 DN50 – DN600 0430 DN63 – DN355 5045 DN80 & DN100 8075 DN63 – DN315 8515 DN63 – DN225 8525 DN63 – DN225 8535 DN63 – DN315 8545 DN63 – DN315 8555 DN63 – DN315 8557 DN63 – DN315
Product Images

Approval Holder:
E-Hawle Armaturenwerke GmbH
Company Name
E-Hawle Armaturenwerke GmbH
Address
Wagrainer Stabe 13 AT 4840 Vocklabruck

View All Listings by this Company

Print This Approval


#241002039

Indirect heat interface unit with copper brazed, stainless-steel heat exchangers, providing heating and instantaneous hot water. The product incorporates an expansion vessel on the cold-water supply to the plate heat exchanger and a safety relief valve on the heating circuit set @ 2.5 bar. The DHW and heating circuits are both fitted with drain valves incorporating cover caps. Maximum working pressure 16 Bar (Primary), 10 Bar (DHW) & 3 Bar (Heating) Maximum operating temperature 95°C

Section:
1350 Heat Exchangers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4” BSP (M)
Marking:
YGHP, serial number, pressure, temperature and other technical information on adhesive label inside body
Installation Requirements:
R001 R140 R360 R511
Expiry date:
31/10/2029
Model:
YGHP E 018
Product Images

Manufacturer:
YGHP Ltd
Company Name
YGHP Ltd

View All Listings by this Company

Print This Approval


#2103042

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
¾” BSP - 2” BSP (M) inlet and outlet.
Marking:
George Kent on lid.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
GKMV30 - DN15, 20, 25, 30 & 40

Approval Holder:
George Kent (Malaysia) Berhad
Company Name
George Kent (Malaysia) Berhad
Address
1115 Blok A, Jalan Puchong, Taman Meranti Jaya, 47120 Puchong, Selangor Darul Ehsan
Country
Malaysia

View All Listings by this Company

Print This Approval


#241002010

Range of in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 1½” BSP (M)
Marking:
ZENNER on cover. Flow arrow on body. Zenner and product info on meter face.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
IUWS hydr. 2,5-110-1/2 D-cell IUWS hydr. 2,5-165-1/2 D-cell IUWS hydr. 2,5-170-1/2 D-cell IUWS hydr. 2,5-190-1/2 D-cell IUWS hydr. 4-105-3/4 D-cell IUWS hydr. 4-130-3/4 D-cell IUWS hydr. 4-165-3/4 D-cell IUWS hydr. 4-190-3/4 D-cell IUWS hydr. 4-220-3/4 D-cell IUWS hydr. 10-150-1 D-cell IUWS hydr. 10-160-1 D-cell IUWS hydr. 10-160-5/4 D-cell IUWS hydr. 10-260-5/4 D-cell IUWS hydr. 16-150-6/4 D-cell IUWS hydr. 16-200-6/4 D-cell IUWS hydr. 16-300-6/4 D-cell IUWS hydr. 25-300-2 D-cell
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company
Manufacturer:
Zenner Meters (Shanghai) Ltd.
Company Name
Zenner Meters (Shanghai) Ltd.
Address
No 15 Dongxing Road Songjiang Ind Zone Shanghai
Country
China

View All Listings by this Company

Print This Approval


#240902075

Range of in-line water meters with plastic bodies. The inlet incorporates a plastic filter. Maximum working pressure; 16 Bar Maximum operating temperature 50°C

Section:
1505 Water Meters
WRAS Approval Number:
240902075
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
All models available in body lengths of 165, 170 and 190mm
Size:
1" BSP (M)
Marking:
Contazara, Model and technical information on faceplate. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
CZ4000- Q3=4

Approval Holder:
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company

Print This Approval


#241002014

Range of IUW ultrasonic water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature: 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models below, note all sizes listed in DN are flanged connections.
Marking:
Zenner, DN, Year of manufacture (YYYY) and technical information on dial face. Size & flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
IUW Q3-25, DN50, Length 200mm IUW Q3-25, DN50, Length 270mm IUW Q3-25, DN50, Length 300mm IUW Q3-40, DN65, Length 200mm IUW Q3-40, DN65, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 300mm IUW Q3-63, DN80, Length 225mm IUW Q3-63, DN80, Length 200mm IUW Q3-100, DN100, Length 360mm IUW Q3-100, DN100, Length 350mm IUW Q3-100, DN100, Length 250mm IUW Q3-160, DN125, Length 250mm IUW Q3-250, DN150, Length 300mm IUW Q3-250, DN150, Length 500mm IUW Q3-400, DN200, Length 350mm IUW Q3-630, DN250, Length 450mm IUW Q3-1000, DN300, Length 500mm
Product Images

Approval Holder:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#241002027

Range of in-line water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters, and the outlets incorporate non-return valves (not suitable for backflow protection). Maximum working pressure 16.0 Bar. Maximum operating temperature 65.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M) ¾” BSP (M 1¼” BSP M, 1½” BSP M, 2” BSP
Marking:
Janz logo, model code and other info on meter box
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
Smartio DN15 Q3=2,5 R*** Smartio DN20 Q3=2,5 R*** Smartio DN20 Q3=4 R*** Models added August 2025: Smartio DN25 Q3=6,3 R*** Smartio DN32 Q3=10 R*** Smartio DN40 Q3=16 R*** Body lengths: DN25: 150mm/160mm/175mm/198mm*/220mm*/260mm* DN32: 150mm/160mm/200mm*/220mm*/260mm* DN40: 150mm/200mm/300mm* *It’s possible to put a non-return valve (NRV)
Product Images

Manufacturer:
Janz Contagem e Gestão de Fluidos, SA
Company Name
Janz Contagem e Gestão de Fluidos, SA
Address
Av. Infante D. Henrique nº 286 Lisboa
Postcode
1950-421
Country
Portugal
Phone
00351 21 831 6000

View All Listings by this Company

Print This Approval


#241002034

Range of water meters with brass bodies with plastic impellers. LXSZ models incorporate a spherical valve on the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
LXSZxx: Laison name and logo on meter face. Flow arrow on body LXCxx: Laison name and logo on meter face. Flow arrow on plastic housing
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
LXSZxx & LXCxx Where xx denotes the inlet/outlet connections and can be replaced with any of the following: 15 = ¾” BSP (M) 20 = 1” BSP (M) 25 = 1.1/4” BSP (M)
Product Images

Approval Holder:
Hangzhou Laison Technology Co., Ltd.
Company Name
Hangzhou Laison Technology Co., Ltd.
Address
No.525 Xixi Road, Xihu district, Hangzhou, Zhejiang province, China

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 634 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.