Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251202726

Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2035 Cistern - Flushing
Section Subtitle:: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:: 251202726
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: BAGBODESIGN & model inside cistern, 6 litre line inside cistern.
Installation Requirements:: R001 R556
Expiry date:: 31/12/2030
Model:: BAGNODESIGN BDS-K133-A01-ESG6

Approval Holder:: BAGNODESIGN (SANIPEXGROUP)

Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

WRAS Approval Number: #260102705

Range of WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2035 Cistern - Flushing
Section Subtitle:: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:: 260102705
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Bagnodesign and model inside cistern, 6 litre line inside cistern.
Installation Requirements:: R001 R556 R571
Expiry date:: 31/01/2031
Model:: BAGNODESIGN BDS-K301-A01-ESG6 & BDS-K301-D01-ESG4

WRAS Approval Number: #260101705

BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2035 Cistern - Flushing
Section Subtitle:: Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:: 260101705
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP Male or 15mm Push-fit Inlet connection.
Marking:: Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:: R001 R280
Expiry date:: 31/01/2031
Model:: Element Cistern

Approval Holder:: Thomas Dudley Limited

Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

WRAS Approval Number: #260101704

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 2034 Cistern - Flushing
Section Subtitle:: Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:: 260101704
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP Male or 15mm Push-fit Inlet connection.
Marking:: Splash cover marked Dudley. Top of Pneumatic drop valve is marked ‘Dudley’ Top of Cable Operated Drop Valve marked ‘Dudley’ Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:: R001 R280
Expiry date:: 31/01/2031
Model:: OBC Concealed Cistern (Category 5).

Approval Holder:: Thomas Dudley Limited

Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:: Thomas Dudley Limited

Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

WRAS Approval Number: #251202727

Concealed WC flushing cisterns and pan, incorporating a compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by either an IR sensor or a piezo button. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 Bar Cold water use only.

Section:: 2041 WC suites
Section Subtitle:: Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:: 251202727
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M)
Marking:: Wallgate and model on control box. 6 litre line inside cistern
Installation Requirements:: R001 R559
Expiry date:: 31/12/2030
Model:: CIST19-OPC: CIST19-OPC is used with Wallgate CWC Series 250 & 150 range of WC pans as follows: CWC-250, CWC-251, CWC-255, CWC-256, CWC-270-L, CWC- 270-R, CWC-280, CWC-281.

Approval Holder:: Wallgate Ltd.

Company Name
Wallgate Ltd.
Address
Crow Lane, Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

WRAS Approval Number: #251116303

Section:: 1660 Shower Outlets
Description:: A Shower hose(s)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
DH2118	chrome	½" conical nut	Open outlet bar	65 °C	DELMEI, WRAS, Manufacture Date（YYYY）	On connector	No

Approval Holder:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturers:: Xiamen Delmei Sanitary Ware Co., Ltd

WRAS Approval Number: #251212304

Section:: 1670 Shower Outlets
Description:: A Range of Shower kit(s)
Wall mounted.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list
WJ 15212 CH	Chrome	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 23212BBR	Brushed Brass	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 27212 BBL	Brushed Black	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 28212 MB	Matt Black	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 21212 BRZ	Brushed Bronze	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 32412 CH	Chrome	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 33412 BBR	Brushed Brass	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 37412 BBL	Brushed Black	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 38412 MB	Matt Black	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No
WJ 31412 BRZ	Brushed Bronze	1/2BSP(M)	Open outlet bar	60 °C	ZHONGRUIYISHENG	on the plate	No

Approval Holder:: ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD

Company Name
ZHEJIANG ZHONG RUI YI SHENG TRADING CO., LTD
Address
Room 1307, Building East No. 1, Tengda Center, 1800 Donghai Ave Jiaojiang District, Taizhou City Zhejiang Province
Postcode
318000
Country
CHINA
Phone
+86-576-88675561
General Email
weijoy@weijoy.cn

View All Listings by this Company
Manufacturers:: ZHEJIANG ZHONG RUI YI SHENG TRADING CO. LTD

WRAS Approval Number: #251115316

Section:: 2001 Shower Valves
Description:: A Range of Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
Wall Mounted Concealed Undefinable Air Gap - See IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
WS3**	Various	BSP 1/2" (F)	10 bar	65 °C	Kind	sleeve	No	Ceramic cartridge	Not Applicable	Not Applicable

Notes & Further Information: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Product Images

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251215312

Section:: 2001 Shower Valves
Description:: A Range of Shower valve(s) with manual temperature control , incorporating a manual diverter between outlets.
Wall Mounted Concealed. Undefinable Air Gap – See IRN’s.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
WSH**	Various	BSP 1/2(F)	12 bar	65 °C	Kind	Body	No	Ceramic cartridge	Not Applicable

Notes & Further Information: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251115319

Section:: 2011 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Concealed Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
AHT2		BSP 1/2" (F)	10 bar	65 °C	Kind	Body	No	1/2 Turn ceramic disc	Not Applicable	Not Applicable

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251216302

Section:: 2011 Shower Valves
Description:: A Shower valve(s) with thermostatic temperature control, incorporating a manual diverter between outlets.
Wall Mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
F1200*	chrome or matte black	3/4” BSP(F)	5 bar	85 °C	KY-LIN	on body	No	Ceramic cartridge

Notes & Further Information: Where * denotes the finish color, and can be replaced with the following: CHR = Chrome BLK = Matte Black The inlets incorporate stainless steel strainers and an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Approval Holder:: KYLIN Sanitary Technology (Xiamen) Co., Ltd

Company Name
KYLIN Sanitary Technology (Xiamen) Co., Ltd
Address
No.878, Tongfu Road, Tong’an District, Xiamen City, Fujian Province
Postcode
361100
Country
China
Phone
+86 159 8082 4540
General Email
961459820@qq.com

View All Listings by this Company
Manufacturers:: KYLIN Sanitary Technology (Xiamen) Co., Ltd

WRAS Approval Number: #260102707

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickel plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 Bar Maximum operating temperature: 85.0°C (Fig 250W models) or 60.0°C (Fig 250CW models)

Section:: 0034 Backflow Prevention Devices
Section Subtitle:: SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:: 260102707
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1/2”, ¾”, 1.1/4” or 1.1/2” BSP (F) (Fig 250W models) 15 & 22mm compression (Fig 250CW models)
Marking:: Hattersley logo, DN, PN, flow arrow and CR on body.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Fig 250W Fig 250CW

Approval Holder:: Hattersley

Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

WRAS Approval Number: #260115306

Section:: 0440 Headworks
Description:: A Range of Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
Plastic body/bodies
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001
Expiry date:: 31/01/2031

Product Identification	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork
T2609	26mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3503	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3505	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T4003	40mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T4005	40mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3507	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3506	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T4010	40mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3511	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge
T3516	35mm	16 bar	85 °C	Company brand, WRAS	Body	No	Ceramic cartridge

Approval Holder:: Wenzhou City Yuebo Cartridge Co., Ltd

Company Name
Wenzhou City Yuebo Cartridge Co., Ltd
Address
22-9 Luomei Avenue, Haicheng Street Wezhou
Postcode
325055
Country
China
General Email
5273363642@qq.com

View All Listings by this Company
Manufacturers:: Wenzhou City Yuebo Cartridge Co., Ltd

WRAS Approval Number: #260215901

Section:: 0445 Combination Tap Assemblies
Description:: A Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
Deck Mounted kitchen tap. Inlet hoses are stainless steel braided & PEX lined. Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R009 R090
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K009*	Various	Captive nut G1/2"	10 bar	65 °C	WINSDRUM	On body	No	1/4 Turn ceramic disc	Metal Backnuts	Aerator	Flow Regulator Fitted,

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #260115314

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of achieving AUK3 tap gap PEX lined stainless steel braided inlet hoses
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
UALA305	Chrome plated	1/2" BSP (F)	10 bar	65 °C	UK BATHROOMS LTD	Handle	No	Ceramic cartridge	C-plate	Aerator
UKB8922W	Chrome plated	1/2" BSP (F)	10 bar	65 °C	UK BATHROOMS LTD	Handle	No	Ceramic cartridge	C-plate	Aerator
UKB9072W	Chrome plated	1/2" BSP (F)	10 bar	65 °C	UK BATHROOMS LTD	Handle	No	Ceramic cartridge	C-plate	Aerator
UKB7202W	Chrome plated	1/2" BSP (F)	10 bar	65 °C	UK BATHROOMS LTD	Handle	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: UK Bathrooms Ltd

Company Name
UK Bathrooms Ltd
Address
Aston House Redburn Road Newcastle Upon Tyne
Postcode
NE5 1NB

View All Listings by this Company

WRAS Approval Number: #260215303

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted. Inlet hoses are stainless steel braided, PEX lined.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
108-1010	Chrome plated	1/2" BSP (F)	10 bar	60 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator
310-1010	Chrome plated	1/2" BSP (F)	10 bar	60 °C	CEILSA	Handle	No	Ceramic cartridge	C-plate	Aerator
365-1010	Chrome plated	1/2" BSP (F)	5 bar	65 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator
220-1010	Chrome plated	1/2" BSP (F)	10 bar	65 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator
108-1080	Chrome plated	1/2" BSP (F)	10 bar	60 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator
310-1080	Chrome plated	1/2" BSP (F)	10 bar	60 °C	CEILSA	Handle	No	Ceramic cartridge	C-plate	Aerator
365-1080	Chrome plated	1/2" BSP (F)	5 bar	65 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator
220-1080	Chrome plated	1/2" BSP (F)	10 bar	65 °C	CEILSA	Handle	No	Ceramic cartridge	Nut	Aerator

Approval Holder:: Jiangmen Ceilsa Bath Co., Ltd

Company Name
Jiangmen Ceilsa Bath Co., Ltd
Address
No.66 Longshan Road Zhishan Town Heshan Guangdong
Country
China
General Email
247232695@qq.com

View All Listings by this Company
Manufacturers:: Jiangmen Ceilsa Bath Co., Ltd

WRAS Approval Number: #260215304

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck mounted. Stainless-steel braided, EPDM lined flexible inlet hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
3320-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3188-**‌	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3313-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3322-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3322A-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3322B-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3274-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator
3271-**	Various	1/2" BSP (F)	5 bar	65 °C	CARLOTA	Handle	No	Ceramic cartridge	C-plate	Aerator

Notes & Further Information: Where ** represents finish and can be replaced by: CR = Chrome plated, MB = Matt black， BB = Brushed brass， BN = Brushed nickel, GM = Gun Metal

Approval Holder:: Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd

Company Name
Zhejiang Carlota Sanitary Ware Manufactory Co.,Ltd
Address
No.10 Jinbo Road, Bingang Industrial Area, Shamen Town, Yuhuan, Zhejiang Province
Country
China
Phone
0086-13777626837
General Email
305779895@qq.com

View All Listings by this Company
Manufacturers:: Zhejiang Carlota Sanitary Ware Manufactory Co., Ltd

WRAS Approval Number: #260215306

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Inlet Hoses are nylon braided and PEX lined. Capable of achieving AUK3 Tap Gap.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009 R010
Expiry date:: 28/02/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
P10000921	Chrome plated	⅜" captive nut	7 bar	60 °C	duschy	Rear of body	No	Ceramic cartridge	C-plate	Aerator
P10000923	Chrome plated	½" captive nut	7 bar	60 °C	duschy	Rear of body	No	Ceramic cartridge	C-plate	Aerator
DS01-B-3/8	Matt black	⅜" captive nut	7 bar	60 °C	duschy	Rear of body	No	Ceramic cartridge	C-plate	Aerator
DS01-B-1/2	Matt black	½" captive nut	7 bar	60 °C	duschy	Rear of body	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Xuancheng City Duschy Electronic and Electrical Appliances Co., Ltd

Company Name
Xuancheng City Duschy Electronic and Electrical Appliances Co., Ltd
Address
No.28, Hongyue Road, Economic and Technologic Development Zone, Xuancheng City, Anhui Province
Country
China
General Email
247232695@qq.com

View All Listings by this Company
Manufacturers:: Xuancheng City Duschy Electronic and Electrical Appliances Co., Ltd

WRAS Approval Number: #250715315

Section:: 0450 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Inlet Hoses are stainless steel braided and PEX lined. Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/07/2030
Model:: 5301* 5301H*

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
5301*	Various	½" captive nut	10 bar	65 °C	LUSSO	On body	No	1/4 Turn ceramic disk	C-plate	Aerator
5301H*	Various	½" captive nut	10 bar	65 °C	LUSSO	On body	No	1/4 Turn ceramic disk	C-plate	Aerator

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome, RG - Rose Gold, BTG - Brushed Titanium gold, BZG - Brushed Zirconium gold, BRG - Brushed Rose gold, MW - Matte white, BS - Brushed stainless, BN - Brushed nickel, PN - Polished nickel, GM - Gunmetal, B - Matte black, TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: Lusso Stone Ltd

Company Name
Lusso Stone Ltd
Address
Lusso House Princeton Drive Stockton
Country
United Kingdom
General Email
customerservice @lusso.com

View All Listings by this Company

WRAS Approval Number: #260117302

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap EPDM lined Stainless Steel Braided inlet hoses
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
EMB20CP	CHROME	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20BN	BRUSHED NICKEL	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20MB	MATT BLACK	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20AB	ARTISAN BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20BB	BRUSHED BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator
EMB20PB	PATINATED BRASS	1/2" BSP	5 bar	65 °C	cleanwater	on bottom of faucet	No	Ceramic Cartridge	C-plate	Aerator

Approval Holder:: Clearwater Products Limited t/a Sterling

Company Name
Clearwater Products Limited t/a Sterling
Address
Shannon Place Tewkesbury Business Park Tewkesbury Gloucestershire
Postcode
GL20 8BB
Country
United Kingdom
Phone
0168429955
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: ZHEJIANG CORAL SANITARY CO., LTD