Directory Search Results

Print List

#240702013

Range of wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel bodies). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure - 8 Bar. Maximum operating temperature - 65 °C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240702013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm spigot connection
Marking:
Stern logo on tap body
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
360100 – Cubica B 360200 – Cubica E 360110 – Cubica DP B 360210 – Cubica DP E
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#240702043

Range of wall mounted, two-hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via infra-red sensor. Temperature is controlled independently via a thermostatic cartridge with a dome operating member which incorporates a manual override button. The spout outlets incorporate plastic aerators, and both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240702043
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) x 1/2" BSP (M) offset unions.
Marking:
Aquis on tap body.
Installation Requirements:
R001 R010 R040 R570
Expiry date:
31/07/2029
Model:
110.305.11 - W35, 110.306.11 - W35, 110.307.11 - W45, 110.308.11 - W45.
Product Images

Approval Holder:
Aquis Systems AG
Company Name
Aquis Systems AG
Address
Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company
Manufacturer:
Aquis Systems AG
Company Name
Aquis Systems AG
Address
Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company

Print This Approval


#240704045

Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The main body incorporates a plastic flow regulator and stainless steel strainer prior to the solenoid. The inlets to the main body of the GS10, CM10 & GH10 model variants incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. These models also have a manual temperature control operated by a single lever on the side of the body. The inlet hoses incorporate a TPE gasket. The models are supplied with or without a pop-up waste. The GS20 & GM20 model variants are single feed. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
240704045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) captive nut flexi hose
Marking:
Aquis etched on body.
Installation Requirements:
R001 R006 R570
Expiry date:
31/07/2029
Model:
161.00Z.FFKKKK - Ultra GS10 161.01Z.FFKKKK - Ultra GS10 161.10Z.FFKKKK - Ultra GS10 161.10XY.FFKKKK - Ultra GS10 161.04Z.FFKKKK - Ultra GS20 161.05Z.FFKKKK - Ultra GS20 161.14Z.FFKKKK - Ultra GS20 161.00XY.FFKKKK - Ultra GS20 162.00Z.FFKKKK - Ultra GM10 162.01Z.FFKKKK - Ultra GM10 162.10Z.FFKKKK - Ultra GM10 162.10XY.FFKKKK - Ultra GM10 162.04Z.FFKKKK - Ultra GM20 162.05Z.FFKKKK - Ultra GM20 162.14Z.FFKKKK - Ultra GM20 162.00XY.FFKKKK - Ultra GM20 163.00Z.FFKKKK - Ultra GH10 163.01Z.FFKKKK - Ultra GH10 163.10Z.FFKKKK - Ultra GH10 163.10XY.FFKKKK - Ultra GH10 Product no. I Z (accessories without influence of water pathway) 0 = standard without additional accessories 1 = incl. pop-up waste 6 = Varioconnect 7 = Varioconnect incl. pop-up waste 8 = incl. Solar 9 = incl. Solar and pop-up waste Product no. II X (power supply without influence of water pathway) 0 = Lithium battery 1 = Mains, surface mounted 2 = Mains, flush-mounted 3 = Alkaline battery 4 = Varioconnect 8 = incl. Solar Y (accessories without influence of water pathway) 0 = standard without additional accessories 1 = incl. Pop-up waste FF (colour) 00 = Brushed Nickel 11 = Chrome 22 = Polished Brass 44 = Satin Finished KKKK (customer/country variant) No influence on water pathway.
Product Images

Approval Holder:
Aquis Systems AG
Company Name
Aquis Systems AG
Address
Balgacherstrasse 17 9445 Rebstein Switzerland

View All Listings by this Company

Print This Approval


#240704722

Side entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240704722
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
BSP1/2” (M) Plastic, BSP1/2” (M) Brass, BSP3/8” (M) Brass
Marking:
R&T, model & BS1212-4 on body
Installation Requirements:
R001 R550 R560
Expiry date:
31/07/2029
Model:
A1423
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#240702703

Range of side and bottom entry BS1212-3 inlet valves, with plastic bodies and brass shanks. Maximum working pressure: 3.0 Bar low pressure and 14.0 bar high pressure Maximum operating temperature: Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240702703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
For use with a float complying with BS 2456, which is not part of this approval.
Size:
½” BSP (M)
Marking:
BS1212-3 on nut. EcoTech and product code on side of valve.
Installation Requirements:
R001 R550 R560
Expiry date:
31/07/2029
Model:
B3012 & B3013
Product Images

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#240602715

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602715
Size:
½” BSP (M)
Marking:
WRAS & Flomasta on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#240602716

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602716
Size:
½” BSP (M)
Marking:
Flomasta & WRAS on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#240704050

AXOR UNO Range of single-hole, single outlet, (fixed) over the rim bidet combination tap assemblies, (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever or dome type operating members. The spout outlets incorporate plastic aerators. The products are supplied with lever operated pop-up waste (not verified by test). Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240704050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
38 211 xx0 45 200 xx0
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2203380

Range of ceramic disc headworks incorporating brass bodies and NBR ‘O’-rings. For insertion into any specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2203380
Size:
see model
Marking:
Manufacturer's logo on body.
Installation Requirements:
R001
Expiry date:
31/03/2027
Model:
CDV002 CDV002H CDV002C 17.8mm Ø.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Taizhou Zhonghao Machine Co Ltd.
Company Name
Taizhou Zhonghao Machine Co Ltd.
Address
PENGJIE HARDWARE INDUSTRIAL ZONE LUQIAO DISTRICT TAIZHOU CITY ZHEJIANG
Country
China
General Email

View All Listings by this Company

Print This Approval


#240704033

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-down spray with a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240704033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Lanbiao etched on operating member.
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/07/2029
Model:
F1214-** Pull down kitchen mixer. ‐**Represents the following different surface treatments: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white 21. DMGJ‐ Light Rose Gold
Product Images

Approval Holder:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company
Manufacturer:
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Company Name
TAIZHOU LANBIAO SANITARY WARE CO., LTD
Address
Xudou Villiage Qinggang Yuhuan Zhejiang
Postcode
317606
Country
China
Phone
18957382651
General Email
957989256@qq.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 597 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.