Range of regulating balancing valves with blue epoxy coated ductile iron bodies incorporating EPDM gaskets and hand wheel operating member. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.
'ApiAlu PP-RCT Class 2 Pipe'. Extruded, multi-layered pipe comprising of a green coloured PP-RCT inner layer, aluminium middle layer and black coloured PE 100 outer layer. For use with water up to 85°C.
'TIMCO VESF 300/VESF 410'. Site applied, two-part (supplied with internal mixing nozzle so no manual mixing required), brown coloured chemical anchor resin. Apply as per manufacturer's instructions dated 01.12.2025. Cure for 4 days@5°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 24016** | Various | 1/2" BSP (F) | 8 bar | 85 °C | NLB | On body | No | Ceramic cartridge | C-plate | Aerator | Interconnecting Hoses, |
** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.
Range of deck mounted single hole, single outlet, fixed electronically controlled tap assemblies with (brass bodies – various finishes), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of wall mounted, single outlet, fixed electronically controlled tap assemblies with (brass bodies - chrome plated), incorporating a solenoid valve controlling the flow which is activated via an infrared sensor. The spout outlet incorporates a plastic aerator, and the product is supplied with a metal backnut. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated stainless brass body). Flow is controlled by a solenoid valve and is activated via an infrared sensor. The spout outlets incorporate plastic aerators. Maximum working pressure 8.0 Bar Maximum operating temperature 60.0°C
Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use
Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055 (2018) WC Cistern incorporating a side or bottom entry float operated inlet valve discharging via a Type AG air gap and a dual flush Syphon of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a lever. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side or bottom entry compact type float operated inlet valve and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap with a Pneumatic or Cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.
Range of multi-layer shower hoses with a PVC inner hose, supplied with EPDM ‘O’-rings. Maximum operating temperature 60.0°C Open outlet use only.
Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickel plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe (manufactured to BS EN 1057). Maximum working pressure 10.0 Bar Maximum operating temperature: 85.0°C (D220W models) or 60.0°C (D220CW models)
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5001JC45-1 | Chrome | 1/2 BSP(F) | 10 bar | 85 °C | HUANRI | BODY | No | Ceramic cartridge | C-plate | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| XB-CT48S001 | 49mm | 16 bar | 85 °C | Tzxinbai, XB-CT48S001 | Body | No | |||||
| XB-CT48S002 | 49mm | 16 bar | 85 °C | Tzxinbai, XB-CT48S002 | Body | No | |||||
| XB-CT48S003 | 49mm | 16 bar | 85 °C | Tzxinbai, XB-CT48S003 | Body | No | |||||
| XB-CT07S | 34mm | 16 bar | 85 °C | Tzxinbai, XB-CT07S | Body | No | |||||
| XB-CT27S | 27mm | 16 bar | 85 °C | Tzxinbai, XB-CT27S | Body | No | |||||
| XB-CT28S | 28mm | 16 bar | 85 °C | Tzxinbai, XB-CT28S | Body | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| JD-WK313P* ** | Various | 1/2" Captive nut | 10 bar | 60 °C | Kind | Operating member | No | Ceramic cartridge | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| JD-WK323P* ** | Various | 1/2" Captive nut | 10 bar | 60 °C | Kind | Operating member | No | Ceramic cartridge | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| JD-WK2003* ** | Various | 1/2" Captive nut | 10 bar | 60 °C | Kind | Operating member | No | Ceramic cartridge | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| JD-WK2003-3* ** | Various | 1/2" Captive nut | 10 bar | 60 °C | Kind | Operating member | No | Ceramic cartridge | Metal Backnuts | Aerator | Flow Regulator Fitted, |
| JD-WK743* ** | Various | 1/2" Captive nut | 10 bar | 60 °C | Kind | Operating member | No | Ceramic cartridge | Metal Backnuts | Aerator | Flow Regulator Fitted, Interconnecting Hoses, |
1. The first * denotes different handles and can be replaced with A, B, C and D. 2. The second ** represents different types of finishes as follows. C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: white CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Wastes | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4001JC45-1 | Chrome | 1/2BSP(F) | 10 bar | 85 °C | HUANRI | BODY | No | Ceramic cartridge | C-plate | Aerator | Click Type | |
| 4001JC45-3 | Chrome | 1/2BSP(F) | 10 bar | 85 °C | HUANRI | BODY | No | Ceramic cartridge | C-plate | Aerator |
The model 4001JC45-1 and 4001JC45-3 taps are same, except that 4001JC45-1 comes with a click-type waste fitting included during sale, while the 4001JC45-3 model does not.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T5002 | Chrome plating | ½” BSF (F) Captive nut | 5 bar | 65 °C | SONAS | on operating member | No | Ceramic cartridge | C-plate | Aerator |
Page 496 of 522
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
