Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310389

Size:

See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).

Marking:

Talbot, size and pressure rating moulded on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

‘DELBRAZE’ range of copper and copper alloy braze fittings for use with copper pipe (EN1057). Maximum working pressure: 16 bar. Maximum working temperature: 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2311066

Size:

See models. Note all sizes are the diameter of the fitting for brazing unless otherwise states.

Marking:

Conex logo >B< and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

5270 – Straight Coupler: 5270 067000000 – 67mm, 5270 06700000L – 67mm long, 5270 076000000 – 76mm, 5270 108000000 – 108mm, 5270 133000000 – 133mm, 5270 159000000 – 159mm. 5243 – Fitting Reducer: 5243 067028000 – 67mm x 28mm, 5243 067035000 – 67mm x 35mm, 5243 067042000 – 67mm x 42mm, 5243 067054000 – 67mm x 54mm, 5243 076035000 – 76mm x 35mm, 5243 076042000 – 76mm x 42mm, 5243 076054000 – 76mm x 54mm, 5243 076067000 – 76mm x 67mm, 5243 108054000 – 108mm x 54mm, 5243 108076000 – 108mm x 76mm, 5243 133108000 – 133mm x 108mm, 5243 159108000 – 159mm x 108mm, 5243 159133000 – 159mm x 133mm. 5009 – Metric to imperial: 5009 076024000 – 76mm x 3”, 5009 108032000 – 108mm x 4”. 5240 – Reduced Coupler: 5240 067028000 – 67mm x 28mm, 5240 067042000 – 67mm x 42mm, 5240 067054000 – 67mm x 54mm, 5240 067054000L – 67mm x 54mm, 5240 076028000 – 76mm x 28mm, 5240 076035000 – 76mm x 35mm, 5240 076042000 – 76mm x 42mm, 5240 076054000 – 76mm x 54mm, 5240 108054000 – 108mm x 54mm, 5240 108076000 – 108mm x 76mm, 5240 133108000 – 133mm x 108mm. 5041 – 45 Deg Obtuse Elbow: 5041 067000000 – 67mm, 5041 067000000L – 67mm, 5041 076000000 – 76mm, 5041 108000000 – 108mm, 5041 133000000 – 133mm, 5041 159000000 – 159mm. 5040 – Obtuse Street Elbow: 5040 067000000 – 67mm, 5040 067000000L – 67mm, 5040 076000000 – 76mm, 5040 108000000 – 108mm, 5040 133000000 – 133mm. 5090 – 90Deg Elbow: 5090 067000000 – 67mm, 5090 076000000 – 76mm, 5090 108000000 – 108mm. 5092 – Street Elbow: 5092 067000000 – 67mm. 5001A – Street Bend: 5001A067000000 – 67mm, 5001A067000000L – 67mm, 5001A076000000 – 76mm, 5001A108000000 – 108mm, 5001A133000000 – 133mm, 5001A159000000 – 159mm. 5002A – Street Elbow: 5002A067000000 – 67mm, 5002A067000000L – 67mm, 5002A076000000 – 76mm, 5002A108000000 – 108mm, 5002A133000000 – 133mm, 5002A159000000 – 159mm. 5130 – Equal Tee: 5130 067067067 – 67mm, 5130 076076076 – 76mm, 5130 108108108 – 108mm, 5130 133133133 – 133mm, 5130 159159159 – 159mm, 5130 067067067L – 67mm. 5130 – Reduced Branch Tee: 5130 067022067 – 67mm x 67mm x 22mm, 5130 067028067 – 67mm x 67mm x 28mm, 5130 067035067 – 67mm x 67mm x 35mm, 5130 067042067 – 67mm x 67mm x 42mm, 5130 067054067 – 67mm x 67mm x 54mm, 5130 076022076 – 76mm x 76mm x 22mm, 5130 076028076 – 76mm x 76mm x 28mm, 5130 076035076 – 76mm x 76mm x 35mm, 5130 076042076 – 76mm x 76mm x 42mm, 5130 076054076 – 76mm x 76mm x 54mm, 5130 076067076 – 76mm x 76mm x 67mm, 5130 108028108 – 108mm x 108mm x 28mm, 5130 108035108 – 108mm x 108mm x 35mm, 5130 108042108 – 108mm x 108mm x 42mm, 5130 108054108 – 108mm x 108mm x 54mm, 5130 108067108 – 108mm x 108mm x 67mm, 5130 108076108 – 108mm x 108mm x 76mm, 5130 133108133 – 133mm x 133mm x 108mm, 5130 159108159 – 159mm x 159mm x 108mm. 5301 – Stop End: 5301 067000000 – 67mm, 5301 067000000L – 67mm, 5301 076000000 – 76mm, 5301 108000000 – 108mm, 5301 133000000 – 133mm, 5301 159000000 – 159mm. 4270G – Female Straight Connector: 4270G067020000 – 67mm x 2.1/2” BSP (F). 4243G – Male Straight Connector: 4243G067020000 – 67mm x 2.1/2” BSP (M) 4243G076024000 – 76mm x 3” BSP (M), 4243G108032000 – 108mm x 4” BSP (M).

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Single flush WC outlet valves with an ABS plastic body (WC01), operated via a mains powered infra red sensor assembly (WC03). Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311323

Size:

1 ½” BSP(M) SIZE ADDED OCTOBER 2024 2” BSP

Marking:

DVS, website, telephone no on sensor rosette.

Installation Requirements:

R001 R571 R572

Expiry date:

30/11/2028

Model:

WCO1 (flush valve) To be installed using the following kit: WCO3 (flush valve kit)

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Range of syphonic flush valves with plastic bodies. Cold water only

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311324

Size:

½” BSP

Marking:

Derwent Macdee

Installation Requirements:

R001 R571 R572

Expiry date:

30/11/2028

Model:

DSD1538 DSD1683 DSD7125 DSD8225 DSD9225 140108 140037

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Manufacturer:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

WC dual flush valve with a plastic body, operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Maximum operating temperature – Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310061

Note:

Direct connection to inlet valve not permitted.

Size:

2” BSP (M)

Marking:

Rongji. Date of manufacture (YYYY/MM/DD) on body

Installation Requirements:

R001 R571 R580 R581

Expiry date:

31/10/2028

Model:

A2120

Approval Holder:

Xiamen R&J Precision Technology Co., Ltd.

Company Name

Xiamen R&J Precision Technology Co., Ltd.

Address

View All Listings by this Company

Manufacturer:

Xiamen R&J Precision Technology Co., Ltd.

Company Name

Xiamen R&J Precision Technology Co., Ltd.

Address

View All Listings by this Company

Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310323

Size:

1 ½” BSP (M), 2” BSP (M).

Marking:

Wirquin moulded on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

31/10/2028

Model:

JOLLYFLUSH – 81811129, JOLLYFLUSH – 10120446, JOLLYTRONIC – 10120021.

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311084

Size:

2” BSP (M)

Marking:

UK Bathrooms Ltd on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

B218M B228 B2650

Approval Holder:

UK Bathrooms Ltd

Company Name

UK Bathrooms Ltd

Address

Aston House Redburn Road Newcastle Upon Tyne

Postcode

NE5 1NB

View All Listings by this Company

Range of plate heat exchangers with stainless steel plate bodies and copper brazing. Maximum working pressure: 45 Bar. Maximum operating temperature: 99 °C.

Section:

1350 Heat Exchangers

Size:

See models.

Marking:

Hrale logo, Model, pressure and product info on adhesive label.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

B3-5, B3-6, B3-9 - ¼” BSP (F) or ⅜” welded pipe connections. B3-12, B3-13, B3-14, B3-15, B3-23, B3-36 & B3-42 - ¾” BSP (M) or 7/8” welded pipe connections. B3-14 DW, B3-16, B3-18 & B3-20 - 1” BSP (M) or 7/8” welded pipe connection. B3-26, B3-27, B3-52, B3-52 DW, B3-60, B3-40, B3-68 & B3-80 - 1 ¼” BSP (M) or 1 ⅜” welded pipe connections. B3-32, B3-32 DW & B3-35 - 1” BSP (M) or 1 1/8” welded pipe connections. B3-63, B3-95, B3-95 DW, B3-115 – 2 ½” BSP (M) or 2 ⅜” welded pipe connections. B3-105 – 3” BSP (M) or 3” welded pipe connections. B3-30 – 1” BSP (M) or 1” welded pipe connections.

Approval Holder:

Ningbo Hrale Plate Heat Exchanger Co., Ltd.

Company Name

Ningbo Hrale Plate Heat Exchanger Co., Ltd.

Address

No. 98, Binwan Road, Binhai New Area, Fenghua, Ningbo, China

View All Listings by this Company

‘MJ-SDC plus’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

½” BSP (M) inlet/outlet (DN15). ¾” BSP (M) inlet/outlet (DN20). 1” BSP (M) inlet/outlet (DN25). 1¼” BSP (M) inlet/outlet (DN32) 1½” BSP (M) inlet/outlet (DN40) 2” BSP (M) inlet/outlet (DN50)

Marking:

Manufacturers logo, address, model, year of manufacture (yy), size and technical information on dial face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

MJ-SDC plus Water meter DN15, DN 20, DN 25, DN 32, DN 40,DN 50

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

Manufacturer:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company

‘Wesan WP’ range of water meters with black epoxy coated cast iron bodies, plastic impellers and EPDM ‘O’-rings and seal. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

DN150- 200.

Marking:

WESAN, Diehl Metering, size, Year of manufacture (YYYY) and other technical information printed on dial face. Size, MWP and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

WESAN WP DN150, WESAN WP DN200.

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestrasse 13/Am Weimarer Berg 3, 91522 Ansbach/99510 Apolda

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestrasse 13/Am Weimarer Berg 3, 91522 Ansbach/99510 Apolda

Country

Germany

View All Listings by this Company