| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| 61407 | Chrome plated | 1/2" BSP (M) | 10 | 85 | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Flow Straightener | |
| 61107 | Chrome plated | 1/2" BSP (M) | 10 | 85 | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Flow Straightener | |
| 51507AQ | Chrome plated | 1/2" BSP (M) | 10 | 85 | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Flow Straightener | |
| 61477 | Chrome plated | 1/2" BSP (M) | 10 | 85 | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Flow Straightener | |
| 61177 | Chrome plated | 1/2" BSP (M) | 10 | 85 | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Flow Straightener |
Range of stainless steel braided, EPDM lined flexible hose assemblies with DZR brass end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel or stainless steel with nylon, EPDM lined flexible hose assemblies with DZR brass end connections. Models 128-3009 CST & YU-JQAL222A are stainless steel wire, all other models are stainless steel with black nylon outer. Some models incorporate spherical valves, see models. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of stainless steel braided or nylon braided EPDM lined hose assemblies available with a variety of end connectors. Maximum operating pressure 10.0 bar. Maximum operating temperature 90°C.
Range of “Tempest” Indirect and direct unvented storage cylinders consisting of factory fitted single or twin coil circuit with either a primary or solar coil. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar@90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve adjustable between 2.7 and 3.3 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum supply pressure to the inlet control group 10.0 bar. Maximum working pressures: Secondary circuit 3.0 bar, Primary Circuit 5.5 bar & Solar circuit 5.5 bar. Maximum operating temperature 70°C.
| Product Identification | Surface Finish / Colour | Dimension | Max Working Pressure (bar) | Max Operating Temp (°C) | Marking | Marking location | All metals in the water pathway are on the 4msi positive list | Headwork for Flow Control | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|
| E2001 | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 | 85 | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Inlet Strainer |
| E2001P | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 | 85 | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Inlet Strainer |
| E2005 | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 | 85 | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Inlet Strainer |
| E2005P | Chrome plated | 15mm compression x 1/2" BSP (M)) | 10 | 85 | LEBAIN | Body | No | Thermostatic cartridge with on/off function | Not Applicable | Inlet Strainer |
Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C
Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wafer or lugged (see models) butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, with Maximum working pressure: 16 Bar. Maximum operating temperature: 100 °C.
Range of wall mounted concealed flow control valves (brass body with various finishes) incorporating, quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C.
Page 436 of 446
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
