Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2112013

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 2112013
Size:: See Model
Marking:: Avonflow, size, PN10 on body
Installation Requirements:: R001 R511
Expiry date:: 31/12/2026
Model:: EPH_VAL20_0049 Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052 Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054 Drain-Off Cock - Type A (15mm Spigot).

Product Images

Approval Holder:: JIANGXI AVONFLOW HVAC TECH CO., LTD.

Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company

WRAS Approval Number: #2112062

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 2112062
Size:: See Model
Marking:: Flomasta (Brand of Kingfisher), size and PN10 on body
Installation Requirements:: R001 R511
Expiry date:: 31/12/2026
Model:: EPH_VAL20_0049 Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052 Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054 Drain-Off Cock - Type A (15mm Spigot).

Product Images

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

WRAS Approval Number: #2110065

Range of shower hoses with PVC outer (various finishes - see model), PET reinforcement layer, PVC inner liner and EPDM washers. Maximum operating temperature 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2110065
Note:: Open outlet use only.
Size:: ½” BSP captive nut/conical (cone) nut (see model).
Marking:: DELMEI on conical nut. NT, WRAS and year of manufacture (YYYY) on ferrule. From February 2022 the products will be marked with: DELMEI, WRAS and year of manufacture (YYYY) on conical nut.
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: Easy Clean Chrome: DH4002-03-151-0560 1.25m PVC hose cone to nut, DN7. DH4002-04-011-0560 1.5m PVC hose cone to nut, DN7. DH4002-01-091-0560 1.75m PVC hose cone to nut, DN7. DH4002-02-011-0560 1.5m PVC hose cone to nut, DN9. DH4002-00-41C-0560 1.75m PVC hose cone to nut, DN11. DH4022-01-011-0560 1.5m PVC hose cone to cone, DN7. DH4022-00-092-0560 1.75m PVC hose cone to cone, DN7. White: DH3001-00-011-0560 1.5m PVC hose cone to cone, DN7. Easy Clean Silver: DH3012-00-011-0560 1.5m PVC hose cone to nut, DN7.

Product Images

Approval Holder:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturer:: Xiamen Delmei Sanitary Ware Co Ltd

Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

WRAS Approval Number: #2110350

Range of interlocking metal shower hoses with silicone liner and EPDM washers. Maximum operating temperature 70°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2110350
Note:: Open outlet use only.
Size:: ½” Conical nut
Marking:: Neoperl, 21 (manufacturing location) date of manufacture (YYYY/MM) on crimp
Installation Requirements:: R001
Expiry date:: 31/10/2026
Model:: Chromalux Agraff Sil – 39.53CD.EFG.HI Part Code Structure 39.53CD.EFG.HI Part Code nomenclature constructed in the following manner: - 39.ABCD.EFG.HI A = Hose Type B = Hose Material CD.EFG = Manufacturing sequential number HI = Packaging information

Product Images

Approval Holder:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:: Neoperl GmbH

Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

WRAS Approval Number: #2205703

Range of shower hoses available in a variety of external sheath materials and finishes (see models) with EPDM washers. Maximum operating temperature 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2205703
Note:: Open outlet use only.
Size:: ½” BSP captive conical nut inlet and outlet
Marking:: HKP, WRAS and year of manufacturer in format (YYYY) on conical nut.
Installation Requirements:: R001
Expiry date:: 31/05/2027
Model:: HKP series of shower hoses. Model: HKP 1234-AA XXXX 1 stands for external hose colour: 1 = white, 2 = golden, 3 = black, 4 = chrome, 5 = stainless steel natural colour, 6 = chrome and black colour. 2 stands for DN of hose: 1=DN8, 2=DN10. 3 stands for external sheath material: 1 = brass, 2 = stainless steel material, 3 = PVC, 4 = SS+PVC. 4 stands for hose nipple material: 1 = brass, 2= plastic (POM). AA stands for hose end connect nut: A = ½” brass, B = ½” ABS yellow, C = ½” ABS white, D = ½” ABS blue， E = ½” ABS chrome. XXXX stand for length of hose (200mm to 2500mm)

Approval Holder:: Zhejiang Kaiyue Plastic Industry Co., Ltd

Company Name
Zhejiang Kaiyue Plastic Industry Co., Ltd
Address
No. 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone
Country
Zhejiang,
Phone
+86-0579-84793818

View All Listings by this Company
Manufacturer:: Zhejiang Kaiyue Plastic Industry Co., Ltd

Company Name
Zhejiang Kaiyue Plastic Industry Co., Ltd
Address
No. 166 Jia Xi Road, Jianshan Town, Pan An Industry Zone
Country
Zhejiang,
Phone
+86-0579-84793818

View All Listings by this Company

WRAS Approval Number: #2201029

Range of stainless steel and brass double interlocked PEX lined flexible hose assemblies (various finishes - see model) incorporating EPDM washers. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201029
Size:: See model
Marking:: IL Flessibile company logo (ilF in a circle), WRAS and year of manufacture (YY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: FXW2CX.AABBCCCC.DDD Model code key: AA: identifies hose raw material and diameter BB: identifies the type of external finish CCCC: identifies the type of fittings DDD: identifies the length (between 50 and 200cm) DN 14 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½" BSP conical nuts - female, ½" BSP anti-twist conical nuts - female, ¾” BSP knurled round nut - female, ⅜” BSP nuts - female, ⅜" BSP cylindrical connector - female, ½" BSP demountable connector - female, ⅜” BSP (M), M15 x1, M12 x1. DN 15 various brass end connectors: ½" BSP knurled nuts - female, ½" BSP hexagonal nuts - female, ½” BSP smooth nuts - female, ½” BSP conical nuts - female, ½” BSP anti-twist conical nuts - female, ⅜” BSP (M). DN 17 brass end connectors: ½” BSP (F) x ½” BSP (F). Surface finishes: Raw, Chromed, Electropolished, Polished, Gold, Bronze, Copper, Nickel, ACR, White, Black, Red, Grey, Silver, Old brass, Beige, Green, Yellow, Orange, Champagne, Fumé, Black metal, Gun metal.

Product Images

Approval Holder:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company
Manufacturer:: IL FLESSIBILE di Nicastri e C srl

Company Name
IL FLESSIBILE di Nicastri e C srl
Address
VIA FELICE VEDANI 16 INVORIO
Postcode
28045
Country
Italy
Phone
+39 335 5948283
General Email
g.buratti@ilflessibile.it

View All Listings by this Company

WRAS Approval Number: #2201003

Range of plastic shower hoses (chrome effect finish) incorporating a PVC inner liner, with EPDM ‘O’-rings and/or washers. Models H3DN6-XXX101C and H3DV2-XXX101A incorporate stainless steel strainers. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201003
Note:: Open outlet use only.
Size:: ½” BSP captive nuts
Marking:: JETOM and WRAS on captive nut
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: H3D05-XXX101C, H3D30-XXX101C, H8Y30-XXX101C, H3DN6-XXX101A, H3DN7-XXX101C, H3DV2-XXX101A. "XXX" means the length of shower hose from 50CM~200CM (for 50CM,"XXX" is "050" for 200CM "XXX" is "200" etc.)

Product Images

Approval Holder:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'an City, Fujian Province, Quanzhou City, Fujian Province, P.R. China
Country
China
Phone
+86 595 68979514

View All Listings by this Company
Manufacturer:: Quanzhou Jetom Hose Industry Co. Ltd.

Company Name
Quanzhou Jetom Hose Industry Co. Ltd.
Address
High-Tech Industrial Zone, Luncang Town, Nan'an City, Fujian Province, Quanzhou City, Fujian Province, P.R. China
Country
China
Phone
+86 595 68979514

View All Listings by this Company

WRAS Approval Number: #2201334

Range of PET (Polyethylene terephthalate) braided flexible hoses incorporating PEX liner and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. (10.0 bar for models added September 2025). Maximum operating temperature 70°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201334
Size:: See Model
Marking:: TUCAI, NT, WRAS and date of manufacture (YY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: PULLOUT PEX BL DN6: hose bore DN6 PULLOUT PEX BL: hose bore DN8 End connections for both DN6 & DN8: H1/2 conical, H1/2 ET, H1/2 UJ, H3/8 UJ, H3/8 Captive nut, H1/2 Captive nut, H11x1 Captive nut, M15X1, M8X1, M10X1, M12X1, M14X1, M15X1 with ‘O’-ring, LISO 10, LISO 8, CLIP 10, CLIP 11, CLIP 15, G3/8 BSP, M16x1, M16x1 with ‘O’-ring, M18x1.5, M18x1.5 with ‘O’-ring, M22x1, CLIP 14, 1/2-18UNS, 11/16-16 UNS Models and sizes added December 2024; PULLOUT PEX BL DN6: stainless steel braiding PULLOUT PEX BL ACB DN6: polymeric PA braiding PULLOUT PEX BL: DN 8 stainless steel braiding PULLOUT PEX BL ACB: DN8, polymeric PA braiding Available fittings: M10X1 M11X1 M12X1 M12X1.5 M15X1 1/2-18UNS 11/16-16UN 1/2-14NPSM G3/8 G1/2 CLIP 10 CLIP 14 Models added in September 2025 M15X1 11/16-16UN G3/8 G1/2 G1/2 axial seal

Product Images

Approval Holder:: Tucai SA

Company Name
Tucai SA
Address
Llobateras 10-12, Poligomo Industrial Santiga, 08210 Barbera Del Valles (Barcelona)
Country
Spain
Phone
+34 93 718 9562

View All Listings by this Company
Manufacturer:: Ningbo Tucai Flexible Pipe Co., Ltd.

Company Name
Ningbo Tucai Flexible Pipe Co., Ltd.
Address
No. 1 Beixing Road, Mazhu Town Yuyao, Zheijiang, 31450
Country
China

View All Listings by this Company

WRAS Approval Number: #2201069

Range of plastic shower hoses (chrome effect finish) incorporating a PVC inner liner, with EPDM ‘O’-rings and/or washers. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2201069
Note:: Open outlet use only.
Size:: ½” BSP captive nuts
Marking:: Nabis on captive nut
Installation Requirements:: R001
Expiry date:: 31/01/2027
Model:: A05054 NAB 2M PVC LINED SHOWER HOSES

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

WRAS Approval Number: #2109011

Range of stainless steel, PVC and nylon braided shower hoses (various finishes), incorporating PVC, EPDM or PEX liners and various end connections.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2109011
Size:: See model
Marking:: GOLOY, WRAS and date of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 30/09/2026
Model:: M15 (M) inlet-1/2" BSP conical nut models: Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment 1/2" BSP captive nut inlet x 1/2" BSP conical nut outlet models: PVC hose: HC11 50~250cm Nylon hose 50~250cm HE1: grey surface treatment HE2: black surface treatment Stainless Steel Double lock hose HXXXXX 50~250cm 1st X stands for materials of inner tube: A=PVC B=EPDM P=PEX 2nd X stands for inner diameter: 7=DN7 10=DN10 3rd X stands for materials of outer tube: 1=SUS201 2=SUS202 3=SUS304 4th X and 5th X stands for colour of surface treatment: 01=electrolysis 02=chrome plated 03=matt black 04=ORB 05=green bronze 06=antique brass 07=golden 08=karat gold 09=rose gold 10=red bronze 11=drawing nickel

Product Images

Approval Holder:: Xiamen Oshince Technology Co., Ltd

Company Name
Xiamen Oshince Technology Co., Ltd
Address
No.177, South Second Ring Road, Tong An Industrial district, Xiamen City
General Email
qab@goloy.com

View All Listings by this Company
Manufacturer:: Xiamen Oshince Technology Co., Ltd

Company Name
Xiamen Oshince Technology Co., Ltd
Address
No.177, South Second Ring Road, Tong An Industrial district, Xiamen City
General Email
qab@goloy.com

View All Listings by this Company