'ELGEF PLUS'. Black coloured, injection moulded HDPE electrofusion and spigot fittings. For use with water up to 60°C.
'ELTEX® SUPERSTRESS TUB124N6000'. Blue coloured, compression moulded HDPE material. For use with water up to 23°C.
'BorSafe™ HE3490-ELS-H,'. Black coloured, extruded polyethylene material. For use with water up to 60°C.
'RAMOFIN PPH301G6NT'. White/beige coloured, injection moulded polypropylene material. For use with water up to 85°C.
'35444 & 46850'. White coloured, extruded PTFE tape. For use with water up to 85°C.
‘202968 Tradesave Pipe Sealing Cord TSTPSC160’. White coloured nylon cord coated with a silicone paste, intended for use as a thread sealant. The cord is to be applied and tightened in accordance with Data Sheet ‘version 1.0’, dated 26/11/2025 and this material is only approved for these conditions. For use with water up to 85°C.
'ABS011 ABS Pipe Cement'. Clear, transparent (un-pigmented) solvent cement, (intended to join PVC pipe and fittings). Apply as per manufacturer's instructions 'Rev00 26112025'. Cure for 20 days at 7°C. For use with water up to 65°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9920-** | Various | 1/2" Captive nut | 10 bar | 60 °C | LAN BIAO | Handle | No | Ceramic cartridge | Not Applicable | Aerator |
**Representing different surface color treatments： No Suffix = Chrome, H: Black DYB: Matte White BZ: Pearl White HGTS: Red Antique Bronze HTL: Yellow Bronze Brushed Q: Bronze QTSL: Bronze Brushed Bright QTS: Bronze Brushed Matte STS: Acid Copper Brushed SDMGJ: Water-Plated Rose Gold N: Nickel Brushed Bright NP: Nickel Brushed TJ: Titanium Gold TJLS: Titanium Gold Brushed G: Zirconium gold GJS: Zirconium Gold Brushed GJSY: Zirconium Gold Brushed Matte PGJFY: Zirconium Gold Brushed Bright PLSJ: Brushed Gold LSJY: Brushed Gold Matte MGJ: Rose Gold MGJL: Rose Gold Brushed DMGJ: Light Rose Gold Brushed HTS: Red Copper Brushed QHP: Gunmetal Gray LSQH: Gunmetal Gray Brushed LHMGJ: Brushed Yellow Rose Gold
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 24015** | Various | 1/2" BSP (F) | 8 bar | 85 °C | NLB | On body | No | Ceramic cartridge | C-plate | Aerator | Interconnecting Hoses, |
| 25001** | Various | 1/2" BSP (F) | 8 bar | 85 °C | NLB | On body | No | Ceramic cartridge | C-plate | Aerator | Interconnecting Hoses, |
** represent different finishes No suffix: Chrome plated H: Black, N: Nickel brushed, GJS: Zirconium gold brushed, G: Zirconium gold, QTSL: Brushed bronze bright, QTS: Brushed bronze matte, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: Rose gold, MGJL: Rose gold brushed, HGT: Red bronze, HTL: Yellow bronze brushed, HTS: Red bronze brushed, PVDQH: Gun grey, HQ: Gun grey brushed, Q: Bronze, DYB: Matte white, STS: Acid copper brushed, BZ: Spray pearl white, DMGJ: Light rose gold brushed.
Wall mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlets incorporate plastic flow straightener, and the inlet incorporates a plastic filter. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use
Range of WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.
Deck mounted, two-hole, single outlet (fixed) combination tap assemby (brass body, various finishes - see model), incorporating ¼ turn ceramic disc headworks with single lever operating member. The spout outlet incorporates a self-cancelling diverter to shower outlet with Type HC device (verified by test - suitable for backflow protection against Fluid Category 3) and a plastic aerator. The products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Two hole, single outlet (swivel) combination tap assembly (brass bodies – various finishes), incorporating non-rising spindle headworks with cross top operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (optional aerator is also supplied) and the product is supplied with a shower hose, shower handset and metal back nuts. Maximum working pressure 10.0Bar Maximum operating temperature 60°C.
Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 30 090 8xx | Various | G 1/2" | 10 bar | 65 °C | AXOR | on the nut | Yes | Not applicable | Not Applicable | Not Applicable | Shower Hose, |
Where 8xx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| DH2118 | chrome | ½" conical nut | Open outlet bar | 65 °C | DELMEI, WRAS, Manufacture Date（YYYY） | On connector | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| WS3** | Various | BSP 1/2" (F) | 10 bar | 65 °C | Kind | sleeve | No | Ceramic cartridge | Not Applicable | Not Applicable |
** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| AHT2 | BSP 1/2" (F) | 10 bar | 65 °C | Kind | Body | No | 1/2 Turn ceramic disc | Not Applicable | Not Applicable |
Range of non-verifiable double check valve assemblies with DZR brass or stainless steel bodies, incorporating two spring loaded, resilient trim in-line check valve cartridges Maximum working pressure 16.0 bar Maximum operating temperature 85°C.
Page 416 of 443
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
