'Vandex Super'. Site applied, two-component, grey coloured (once mixed) cementitious coating. Mix cement powder with water in a weight ratio of 5:2. Apply as per manufacturer's Instructions for Use '2nd issue', dated '18.11.2020'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2205510

Expiry date:

31/05/2027

Approval Holder:

Vandex Isoliermittel GmbH

Company Name

Vandex Isoliermittel GmbH

Country

Germany

View All Listings by this Company

'Interline 925 Cream'. Site applied, cream coloured, two-component, solvent free epoxy coating. Mix part A (white liquid) with part B (yellow liquid) in a volume ratio of 3:1 and apply as per manufacturer’s TDS ref. ‘2252’ dated 17/12/2020. Cure for 7 days@25°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5042 Coatings, Paints & Linings

Section Subtitle:

Site applied pipe and fittings coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.

WRAS Approval Number:

2202568

Expiry date:

28/02/2027

Approval Holder:

Akzo Nobel Saudi Arabia Ltd.

Company Name

Akzo Nobel Saudi Arabia Ltd.

Country

Saudi Arabia

View All Listings by this Company

'Tiefill'. Site applied, grey coloured cementitious repair mortar. Mix Tiefill with water in a weight ratio of 9.4:1 and apply in accordance with manufacturer’s instructions for use 'bulletin no. TFILL/031/003, issued 'July 2020'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5063 Concrete, Cement and Mortar

Section Subtitle:

Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.

WRAS Approval Number:

2109566

Expiry date:

30/09/2026

Approval Holder:

Flexcrete Technologies Ltd.

Company Name

Flexcrete Technologies Ltd.

Address

Tomlinson Road, Leyland, Lancashire

Postcode

PR25 2DY

Phone

0845 2607005

General Email

Info@flexcrete.com

View All Listings by this Company

'BÜFA®-ISO-Gelcoat 3000-H 572-9735 & Synolite 5410-P-4'. Grey coloured, unsaturated polyester gelcoat with a hand-laid unsaturated polyester resin and fibreglass laminate. Apply and cure in accordance with manufacturer's user guides 'Q-035, issue 1' & 'BUKUG 1001, issue 1' dated 19/08/2020. For use with water up to 23°C.

Section:

5125 Glass Reinforced Plastics (GRP)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2111542

Expiry date:

30/11/2026

Approval Holder:

BÜFA Composite Systems GmbH & Co. KG

Company Name

BÜFA Composite Systems GmbH & Co. KG

Address

Hohe Looge 2-8, 26180 Rastede

Country

Germany

View All Listings by this Company

'Grilon BG-30/2 natural (appears cream in colour) & Grilon BG-30/2 black 9697 (black coloured)'. Injection moulded PA-GF30 materials. Grilon BG-30/2 black 9697 is for use with water up to 85°C. Between 1st October 2020 and 10th May 2022, Grilon BG-30/2 natural was for use with water up to 23°C. Between 11th May 2022 and 31st October 2025 Grilon BG-30/2 natural is for use with water up to 60°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2010567

Expiry date:

31/10/2025

Approval Holder:

EMS-CHEMIE AG

Company Name

EMS-CHEMIE AG

Address

Via Innovativa 1, CH-7013 Domat/Ems

Country

Switzerland

Phone

+41 81 632 78 78

General Email

welcome@emsgrivory.com

View All Listings by this Company

‘VP1620-WR & VP-2020-WR’. Single layer, cream coloured, extruded PEX-b tubes. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2206533

Expiry date:

30/06/2027

Approval Holder:

Zhejiang Valtec Plumbing Equipment Co., Ltd.

Company Name

Zhejiang Valtec Plumbing Equipment Co., Ltd.

Address

No. 121 Hongxing Road, Xiaoshan District, Hangzhou City,

Country

China

View All Listings by this Company

'Chemfix 10'. Red coloured chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated '12/11/2020'. Cure for 48 hours@7°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/08/2026

Approval Holder:

Chemfix Products Ltd.

Company Name

Chemfix Products Ltd.

Address

Mill Street East, Dewsbury, West Yorkshire

Postcode

WF12 9BQ

Phone

+44(0)1924 453886

View All Listings by this Company

'Chemfix 600'. Red coloured chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated '11/11/2020'. Cure for 48 hours@7°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/08/2026

Approval Holder:

Chemfix Products Ltd.

Company Name

Chemfix Products Ltd.

Address

Mill Street East, Dewsbury, West Yorkshire

Postcode

WF12 9BQ

Phone

+44(0)1924 453886

View All Listings by this Company

'STRONGHOLD SH-EP3'. Red coloured chemical anchor resin supplied in a pre-weighed dual cartridge. Apply as per manufacturer's instructions dated '12/11/2020'. Cure for 48 hours@7°C. For use with water up to 23°C. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/08/2026

Approval Holder:

Stronghold Systems (Asia) Pte. Ltd.

Company Name

Stronghold Systems (Asia) Pte. Ltd.

Address

10 Anson Road, #18-11, International Plaza, S (079903)

Country

Singapore

View All Listings by this Company

'ME2020/80 Grey'. Grey coloured, injection moulded VMQ sheet material. Shore hardness 80. Tested in-radius 1.0mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2210541

Expiry date:

31/10/2027

Approval Holder:

Elastotech s.r.l.

Company Name

Elastotech s.r.l.

Address

Via Provinciale, 92/94, 24060 Castelli Calepio (BG)

Country

Italy

Phone

0039 - 035 - 4496000

View All Listings by this Company

'TamAcryl 2000 Orange or Blue with corrosion inhibitor', orange coloured or blue coloured (once mixed), site applied acrylic grouts. Mix Part A (orange or blue) with 2% accelerator and then mix with Part B (colourless) in a 1:1 volume ratio. Apply as per manufacturer’s TDS 'V1UK20 – 2020.10.22'. Cure for 12 hours at 16°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval. These materials are for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992-3:2006 (Design of concrete structures – Liquid retraining and containing structures) with respect to normal frequency of joints. The material has been tested at a reduced surface area to volume ratio of 1000mm² per litre.

Section:

5505 Sealants - Flat Faced Joints

Section Subtitle:

Waterstops. These materials are for use in concrete reservoirs and similar structures, constructed in accordance with the design criteria of BS EN 1992 with respect to normal frequency of joints. The materials have been tested at a reduced surface area to volume ratio of 1000mm² per litre as specified in BS 6920: Part 1.

WRAS Approval Number:

2308543

Expiry date:

31/08/2028

Approval Holder:

Normet UK Ltd.

Company Name

Normet UK Ltd.

Address

Unit 9 Wheeler Road, Seven Stars Industrial Estate, Coventry

Postcode

CV3 4LA

View All Listings by this Company

'Griffon WDF-05'. Site applied, blue coloured solvent cement. Apply as per manufacturer's instructions '6311380 20200708'. Cure for 30 minutes@12°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5560 Solvent Cements

Expiry date:

31/12/2025

Approval Holder:

Bison International

Company Name

Bison International

Address

PO Box 160 NL 4460 A D Goes Netherlands

View All Listings by this Company

Range of spring loaded resilient trim check valve cartridges with a plastic body and EPDM ‘O’-rings. For insertion into specifically dimensioned bores Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

240502707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Korie, size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Korie DN12, DN12200000 Korie DN14, DN14200000 Korie DN20, DN20200000

Product Images

Approval Holder:

Yuhuan Korie Plastic Factory

Company Name

Yuhuan Korie Plastic Factory

Address

Technology Industry Functional Area, Chumen Village Yuhuan

Country

Zhejiang

View All Listings by this Company

Manufacturer:

Yuhuan Korie Plastic Factory

Company Name

Yuhuan Korie Plastic Factory

Address

Technology Industry Functional Area, Chumen Village Yuhuan

Country

Zhejiang

View All Listings by this Company

Range of spring loaded resilient trim check valve cartridges with plastic bodies. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

0026 Backflow Prevention Devices

Section Subtitle:

SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.

WRAS Approval Number:

250402705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN13 – DN25

Marking:

Korie, size and flow arrow on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

KORIE DN13, DN13200000 – DN13 KORIE DN15, DN15200000 – DN15 KORIE OV15, OV15200000 – DN15 KORIE OV20, OV20200000 – DN20 KORIE OV25, OV25200000 – DN25

Manufacturer:

Yuhuan Korie Plastics Co., Ltd.

Company Name

Yuhuan Korie Plastics Co., Ltd.

Address

Technology Industry Functional Area, Chumen Village， Yuhuan， Zhejiang

Country

China

View All Listings by this Company

Range of tundishes incorporating a black or grey plastic body or mild steel painted black body (128-2001 CST, 128-2003 CST, 128-2004 CST & 128-2005 CST models only). Maximum operating temperature 85°C.

Section:

0046 Backflow Prevention Devices

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2311336

Size:

See model

Marking:

Altecnic and product info on body. Some models are also marked with the date of manufacture. The code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

128-2001 CST 1F x 1 ¼”F Straight Tundish (black), 128-2003 CST 1 ½”F x 2”F Straight Tundish (black), 128-2004 CST 2”F x 2 ½”F Straight Tundish (black), 128-2005 CST 2 ½”F x 3”F Straight Tundish (black), 128-4001 CST 15mm x 22mm Straight Tundish (black), 128-4002 CST 15mm x 22mm Straight Tundish (black), 128-4003 CST 15mm x 22mm Straight Tundish (black bottom and clear top), 128-4004 CST 22mm x 28mm Straight Tundish (grey), AL-400010 15mm x 22mm Straight Tundish (black), AP-400010 15mm x 22mm Straight Tundish (black), AP-400012 15mm x 22mm Straight Tundish (black), G-128-2201 CST ½” M x ¾” M Angled Tundish (black), G-128-2010 CST 15mm x 22mm Straight Dry Trap Tundish (black), Model added May 2024: AP-400011 22mm x 28mm Straight Tundish (black). Model added September 2024: 128-2002CST 1 ¼” BSP(F) x 1 ½”BSP(F)

Product Images

Approval Holder:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Manufacturer:

Altecnic Limited

Company Name

Altecnic Limited

Address

Francesco House, Staples Close Stafford Staffordshire

Postcode

ST16 1WQ

Country

United Kingdom

Phone

+44 (0)1785 218200

General Email

sales@altecnic.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and is also supplied with an optional plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240604018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Francis on body From 01/08/2024 Clever on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2029

Model:

ARAYA - Long neck mono sink mixer Model 922020

Product Images

Approval Holder:

STH Westco Limited

Company Name

STH Westco Limited

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

General Email

john.gartshore@westco.co.uk

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass). Incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener and is also supplied with an optional plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

240604038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided EPDM flexible hose assemblies incorporating ½” BSP (F) captive nut end connections.

Marking:

Instinct (Brand of PHG) on body.

Installation Requirements:

R001 R006 R010

Expiry date:

30/06/2029

Model:

4E2020 - S12 LONG NECK KITCHEN MIXER CHROME

Approval Holder:

PHG (Plumbing Heating Group)

Company Name

PHG (Plumbing Heating Group)

Address

C/O Walter Tipper Ltd , Europa Way, Lichfield, Staffs.

Postcode

WS14 9TZ

View All Listings by this Company

Range of vertical and horizontal expansion vessels with EPDM membrane and stainless steel or galvanised steel connections. Maximum working pressures 10.0. Maximum operating temperature 85 °C.

Section:

1000 Expansion Vessels

Size:

¾” BSP (M) or 1” BSP (M).

Marking:

VAREM, year of production, model and further product information on adhesive label.

Installation Requirements:

R001 R535

Expiry date:

31/12/2028

Model:

Vertical models: S2005; S2008; S2012; S2019; S2020; E1024; S2025; S2040. Horizontal models: S2H19; S2H20.

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Fluxo range of Brass & PPSU crimp fittings for use with ‘Fluxo’ PEX/Al/PEX Multilayer Pipe. Crimp joint is achieved by a TH profile crimp jaws. Maximum working pressure 10bar @ 70°C, 6Bar @ 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2311334

Size:

See Model

Marking:

PPSU fittings: Fluxo, PPSU, size stamped on body. Brass fittings: Fluxo, size, DZR stamped on body. Pipe: Fluxo, date of manufacture (yyyy/mm/dd), size, ISO 21003 & other technical information.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

PPSU Crimp Equal Elbows: FLC16ZPN A 90' D.16 FLC20ZPN A 90' D.20 FLC26ZPN A 90' D.26 FLC32ZPN A 90' D.32 PPSU Crimp Equal Tees: FLT16ZPN D.16 FLT20ZPN D.20 FLT26ZPN D.26 FLT32ZPN D.32 PPSU Crimp Reducing Tees: FLT201616ZPN D.20/16/16 FLT201620ZPN D.20/16/20 FLT202016ZPN D.20/20/16 FLT261626ZPN D.26/16/26 FLT262020ZPN D.26/20/20 FLT262026ZPN D.26/20/26 FLT322032ZPN D.32/20/32 FLT322632ZPN D.32/26/32 PPSU Reducing Sleeve Reducers: FLM2016ZPN D.20/16 FLM3226ZPN D.32/26 PPSU Equal Crimp Sleeves: FLM16ZPN D.16 FLM20ZPN D.20 FLM26ZPN D.26 FLM32ZPN D.32 Brass Male Transition Elbows: FXC1612M 16mm x 3/8" FXC1615M 16mm x 1/2" FXC2015M 20mm x 1/2" FXC2020M 20mm x 3/4" FXC2620M 26mm x 3/4" FXC2626M 26mm x 1" FXC3226M 32mm x 1" Brass Female Transition Elbows: FXC1615F 16mm x 1/2" FXC2015F 20mm x 1/2" FXC2020F 20mm x 3/4" FXC2620F 26mm x 3/4" FXC2626F 26mm x 1" FXC3226F 32mm x 1" Brass Wall Mounted Transition Elbows: FXCA1615F 16mm x 1/2" FXCA2015F 20mm x 1/2" Brass Transition Elbows with Rotating Nut: FXCT1615F 16mm x 1/2" FXCT1620F 20mm x 3/4" FXCT2015F 20mm x 1/2" FXCT2020F 20mm x 3/4" FXCT2620F 26mm x 3/4" Brass Male Straight Transition Adaptors: FXM1612M 16mm x 3/8" FXM1615M 16mm x 1/2" FXM1620M 16mm x 3/4" FXM2015M 20mm x 1/2" FXM2020M 20mm x 3/4" FXM2615M 26mm x 1/2" FXM2620M 26mm x 3/4" FXM2626M 26mm x 1" FXM3226M 32mm x 1" Brass Female Straight Transition Adaptors: FXM1615F 16mm x 1/2" FXM1620F 16mm x 3/4" FXM2015F 20mm x 1/2" FXM2020F 20mm x 3/4" FXM2026F 20mm x 1" FXM2620F 26mm x 3/4" FXM2626F 26mm x 1" FXM3226F 32mm x 1 FXM3233F 32mm x 1 1/4" Brass Reducer: FXM2616 26mm x 16mm FXM2620 26mm x 20mm FXM3216 32mm x 16mm FXM3220 32mm x 20mm Nickel Plated Male Compression Adaptor for Heater: FLMPN1612M 16x3\8” FLMPN1615M 16x1\2” FLMPN2015M 20x1\2” FLMPN2020M 20x3\4” Brass Female Transition Adaptor with Rotating Nut: FXMT1612F 16mm x 3/8" FXMT1615F 16mm x 1/2" FXMT1620F 16mm x 3/4" FXMT2015F 20mm x 1/2" FXMT2020F 20mm x 3/4" FXMT2620F 26mm x 3/4" FXMT2626F 26mm x 1" FXMT3226F 32mm x 1" FXMT3233F 32mm x 1 1/4" Brass Double Female Transition Elbow Wall Plate: FXSM1615F 16mm x 1/2" FXSM2015F 20mm x 1/2" Brass Female Tee: FXT1615F 16mm x 1/2" FXT2015F 20mm x 1/2" FXT2020F 20mm x 3/4" FXT2615F 26mm x 1/2" FXT2620F 26mm x 3/4" FXT3215F 32mm x 1/2" FXT3220F 32mm x 3/4" Brass Male Transitin Tee: FXT1615M 16mm x 1/2" FXT2620M 26mm x 3/4" Brass Reducing Tee: FXT162016 16mm x 20mm x 16mm FXT202016 20mm x 20mm x 16mm FXT202620 20mm x 26mm x 20mm FXT261620 26mm x 16mm x 20mm FXT262616 26mm x 26mm x 16mm FXT262620 26mm x 26mm x 20mm FXT321632 32mm x 16mm x 32mm Bare Coils: FLEM100C16 Fluxo Pipe 16mm 100m FLEM100C20 Fluxo Pipe 20mm 100m FLEM200C16 Fluxo Pipe 16mm 200m FLEM50C26 Fluxo Pipe 26mm 50m FLEM50C32 Fluxo Pipe 32mm 50m Blue Sheathed Coils: FLEM100FB16 Fluxo Pipe 16mm 100m FLEM50FB16 Fluxo Pipe 16mm 50m FLEM50FB20 Fluxo Pipe 20mm 50m Red Sheathed Coils: FLEM100FR16 Fluxo Pipe 16mm 100m FLEM50FR16 Fluxo Pipe 16mm 50m FLEM50FR20 Fluxo Pipe 20mm 50m FLEM50FR26 Fluxo Pipe 26mm 50m Pre Insulated Coils: FLEM50G10P16 Fluxo Pipe 16mm 50m FLEM50G10P20 Fluxo Pipe 20mm 50m FLEM50G10P26 Fluxo Pipe 26mm 50m FLEM25G10P32 Fluxo Pipe 32mm 25m Bare Pipe Lengths FLEM4L16 Fluxo Pipe 16mm 4m FLEM4L20 Fluxo Pipe 20mm 4m FLEM4L26 Fluxo Pipe 26mm 4m FLEM4L32 Fluxo Pipe 32mm 4m FLEM3L16 Fluxo Pipe 16mm 3m FLEM3L20 Fluxo Pipe 20mm 3m

Product Images

Approval Holder:

Aliaxis UK Ltd.

Company Name

Aliaxis UK Ltd.

Address

35 St Peter’s Road, Huntingdon

Postcode

PE29 7DA

Country

United Kingdom

Phone

01622852761

General Email

david.cousins@aliaxis.com

View All Listings by this Company

Manufacturer:

Nicoll (pipe), REDI S.p.A. (plastic fittings) & Bonomi Idrosanitaria (brass fittings).

Company Name

Nicoll (pipe), REDI S.p.A. (plastic fittings) & Bonomi Idrosanitaria (brass fittings).

Address

Nicoll, 37, rue Pierr Marie Curie 49309 Cholet Cedex REDI S.p.A, Località Ischia di Crociano snc, 57025 Piombino, Livorno Bonomi Idrosanitaria, Vallegobbia 68 25068 Sarezzo - Brescia

General Email

View All Listings by this Company

Range of AIS tin-plated brass and PPSU press fit fittings for use with WRW & 'Maincor MLC’ multi layered PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240202078

Size:

Please refer to model.

Marking:

Manicor Pipe: Maincor and technical information on pipe. WRW Pipe: AIS XPERT and technical information on pipe. Fittings: AIS & size on Crimping profile.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

Press fit connections: P733.4040, PPSU Press-coupling, 40mm P733.5050, PPSU Press-coupling, 50mm P733.6363, PPSU Press-coupling, 63mm P703.4040, PPSU Press-elbow 90°, 40mm P703.5050, PPSU Press-elbow 90°, 50mm P703.6363, PPSU Press-elbow 90°, 63mm P723.404040, PPSU Press-Tee, 40mm P723.505050, PPSU Press-Tee, 50mm P723.636363, PPSU Press-Tee, 63mm P703.20201, PPSU Press-elbow 90°, 20mm P703.2626, PPSU Press-elbow 90°, 26mm P723.1620161, PPSU Press-Tee, 16mm-20mm P723.2020201, PPSU Press-Tee, 20mm P723.2016161, PPSU Press-Tee, 16mm-20mm P723.2016201, PPSU Press-Tee, 16mm-20mm P723.2020161, PPSU Press-Tee, 16mm-20mm P723.262626, PPSU Press-Tee, 26mm P723.261626, PPSU Press-Tee, 16mm-26mm P723.2520201, PPSU Press-Tee, 20mm-25mm P723.2520251, PPSU Press-Tee, 20mm-25mm P723.322632, PPSU Press-Tee, 26mm-32mm P723.322626, PPSU Press-coupling, 26mm-32mm P733.12020, PPSU Press-coupling, 20mm P733.20201, PPSU Press-coupling, 20mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.2625D, PPSU Press-coupling, 25mm-26mm P733.2626, PPSU Press-coupling, 26mm P733.20161, PPSU Press-coupling, 16mm-20mm P733.26201, PPSU Press-coupling, 20mm-26mm 733.3226, PPSU Press-coupling, 26mm-32mm P701.1612, PPSU male press elbow, 16mm-1/2” BSP (M) P701.2012, PPSU male press elbow, 20mm-1/2” BSP (M) P701.20121, PPSU male press elbow, 20mm-1/2” BSP (M) P701.2034, PPSU male press elbow, 20mm-3/4” BSP (M) P701.20341, PPSU male press elbow, 20mm-3/4” BSP (M) P701.2534, PPSU male press elbow, 25mm-3/4” BSP (M) P701.32100, PPSU male press elbow, 32mm-1” BSP (M) P702.1612, PPSU female press wallplate, 16mm-1/2” BSP (F) P702.2012, PPSU female press wallplate, 20mm-1/2” BSP (F) P702.20121, PPSU female press wallplate, 20mm-1/2” BSP (F) P700.1612, PPSU Female press elbow , 16mm-1/2” BSP (F) P700.2012, PPSU Female press elbow, 20mm-1/2” BSP (F) P700.20121, PPSU Female press elbow, 20mm-1/2” BSP (F) P711.1612, PPSU male press connection, 16mm-1/2” BSP (M) P711.2012, PPSU male press connection, 20mm-1/2” BSP (M) P711.2034, PPSU male press connection, 20mm-3/4” BSP (M) P711.20121, PPSU male press connection, 20mm-1/2” BSP (M) P711.2534, PPSU male press connection, 25mm-3/4” BSP (M) P711.32100, PPSU male press connection, 32mm-1” BSP (M) 1*00.1612, Press-elbow female 90º XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*00.2012, Press-elbow female 90º XPRT 20x2,25-1/2"H, 20mm-1/2” BSP (F) 1*00.20121, Press-elbow female 90º XPRT 20x2,00-1/2"H, 20mm-1/2” BSP (F) 1*00.2034, Press-elbow female 90º XPRT 20x2,25-3/4"H, 20mm-3/4” BSP (F) 1*00.20341, Press-elbow female 90º XPRT 20x2,00-3/4"H, 20mm-3/4” BSP (F) 1*00.2534, Press-elbow female 90º XPRT 25x2,50-3/4"H, 25mm-3/4” BSP (F) 1*00.2634, Press-elbow female 90º XPRT 26x3,00-3/4"H, 26mm-3/4” BSP (F) 1*00.25100, Press-elbow female 90° XPRT 25x2,5-1” H, 25mm-1” BSP (F) 1*00.32100, Press-elbow female 90º XPRT 32x3,00-1"H, 32mm-1” BSP (F) 1*01.1612, Press-elbow male 90º XPRT 16x2,00-1/2"M, 16mm-1/2” BSP (M) 1*01.1638, Press-elbow male 90º XPRT 16x2,00-3/8"M, 16mm-3/8” BSP 1*01.2012, Press-elbow male 90º XPRT 20x2,25-1/2"M, 20mm-1/2” BSP 1*01.20121, Press-elbow male 90º XPRT 20x2,00-1/2"M, 20mm-1/2” BSP 1*01.2034, Press-elbow male 90º XPRT 20x2,25-3/4"M, 20mm-3/4” BSP 1*01.20341, Press-elbow male 90º XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*01.2534, Press-elbow male 90º XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*01.2634, Press-elbow male 90º XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*01.25100, Press-elbow male 90º XPRT 25x2,50-1"M, 25-1” BSP 1*01.32100, Press-elbow male 90º XPRT 32x3,00-1"M, 32-1” BSP 1*02.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 46 mm height, 16-1/2” BSP (F) 1*02.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 46 mm height, 20-1/2” BSP 1*02.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 46 mm height, 20-1/2” BSP 1*02.2034, Press-wallplate elbow female 90º XPRT 20x2,00-3/4"F - 46 mm height, 20-3/4” BSP 1*02.2534, Press-wallplate elbow female 90º XPRT 25x2,50-3/4"F - 46 mm height, 25-3/4” BSP 1*03.1616, Press-elbow 90º XPRT 16x2,00, 16mm 1*03.2020, Press-elbow 90º XPRT 20x2,25, 20mm 1*03.20201, Press-elbow 90º XPRT 20x2,00, 20mm 1*03.2525, Press-elbow 90º XPRT 25x2,50, 25mm 1*03.2626, Press-elbow 90º XPRT 26x3,00, 26mm 1*03.3232, Press-elbow 90º XPRT 32x3,00, 32mm 1*04.3232, Press-elbow 45º XPRT 32x3,00, 32mm 1*05.1612, Double-press-tab connection elbow FT, 16x2,0-1/2-16x2,0, 16mm-1/2 BSP (F) 1*05.2012, Double-press-tab connection elbow FT,20x2,25 ½”, 20mm-1/2 BSP (F) 1*06.1612, Press-wallplate elbow female 90º XPRT 16x2,00-1/2"F - 38 mm height, 16-1/2” BSP (F) 1*06.1638, Press-wallplate elbow female 90º XPRT 16x2,00-3/8"F - 38 mm height, 16-3/8” BSP 1*06.2012, Press-wallplate elbow female 90º XPRT 20x2,25-1/2"F - 38 mm height, 20-1/2” BSP 1*06.20121, Press-wallplate elbow female 90º XPRT 20x2,00-1/2"F - 38 mm height, 20-1/2” BSP 1*07.1612, Elbow 90º with screw connection XPRT 16x2,00-1/2", 16-1/2” BSP (M) 1*07.2012, Elbow 90º with screw connection XPRT 20x2,25-1/2", 20-1/2” BSP (M) 1*07.2034, Elbow 90º with screw connection XPRT 20x2,25-3/4", 20-3/4” BSP (M) 1*07.2534, Elbow 90º with screw connection XPRT 25x2,50-3/4", 25-3/4” BSP (M) 1*08.1612, Press-UPS-connection elbow FT Geberit 16x2,0-1/2, 16mm-1/2” BSP (F) 1*10.1612, Press-connection female XPRT 16x2,00-1/2"H, 16mm-1/2” BSP (F) 1*10.1634, Press-connection female XPRT 16x2,00-3/4"H, 16-3/4” BSP 1*10.2012, Press-connection female XPRT 20x2,25-1/2"H, 20-1/2” BSP 1*10.20121, Press-connection female XPRT 20x2,00-1/2"H, 20-1/2” BSP 1*10.2034, Press-connection female XPRT 20x2,25-3/4"H, 20-3/4” BSP 1*10.20341, Press-connection female XPRT 20x2,00-3/4"H, 20-3/4” BSP 1*10.20100, Press-connection female XPRT 20x2,25-1"H, 20-1” BSP 1*10.25100, Press-connection female XPRT 25x2,50-1"H, 25-1” BSP 1*10.2534, Press-connection female XPRT 25x2,50-3/4"H, 25-3/4” BSP 1*10.26100, Press-connection female XPRT 26x3,00-1"H, 26-1” BSP 1*10.2634, Press-connection female XPRT 26x3,00-3/4"H, 26-3/4” BSP 1*10.32100, Press-connection female XPRT 32x3,00-1"H, 32-1” BSP 1*10.32114, Press-connection female XPRT 32x3,00-1 1/4"H, 32-1 1/4” BSP 1*11.1612, Press-connection male XPRT 16x2,00-1/2"M, 16-1/2” BSP (M) 1*11.1634, Press-connection male XPRT 16x2,00-3/4"M, 16-3/4” BSP 1*11.1638, Press-connection male XPRT 16x2,00-3/8"M, 16-3/8” BSP 1*11.2012, Press-connection male XPRT 20x2,25-1/2"M, 20-1/2” BSP 1*11.20121, Press-connection male XPRT 20x2,00-1/2"M, 20-1/2” BSP 1*11.2034, Press-connection male XPRT 20x2,25-3/4"M, 20-3/4” BSP 1*11.20341, Press-connection male XPRT 20x2,00-3/4"M, 20-3/4” BSP 1*11.20100, Press-connection male XPRT 20x2,25-1"M, 20-1” BSP 1*11.25100, Press-connection male XPRT 25x2,50-1"M, 25-1” BSP 1*11.2534, Press-connection male XPRT 25x2,50-3/4"M, 25-3/4” BSP 1*11.26100, Press-connection male XPRT 26x3,00-1"M, 26-1” BSP 1*11.2634, Press-connection male XPRT 26x3,00-3/4"M, 26-3/4” BSP 1*11.32100, Press-connection male XPRT 32x3,00-1"M, 32-1” BSP 1*11.32114, Press-connection male XPRT 32x3,00-1 1/4"M, 32-1 1/4” BSP 1*14.1612, Press-screw connection female XPRT 16x2,00-1/2"F, 16-1/2” BSP (F) 1*14.1634, Press-screw connection female XPRT 16x2,00-3/4"F, 16-3/4” BSP 1*14.1638, Press-screw connection female XPRT 16x2,00-3/8"F, 16-3/8” BSP 1*14.2012, Press-screw connection female XPRT 20x2,25-1/2", 20-1/2” BSP 1*14.20121, Press-screw connection female XPRT 20x2,0-1/2", 20-1/2” BSP 1*14.2034, Press-screw connection female XPRT 20x2,25-3/4", 20-3/4” BSP 1*14.20341, Press-screw connection female XPRT 20x2,00-3/4"F, 20-3/4” BSP 1*14.25100, Press-screw connection female XPRT 25x2,5-1", 25-1” BSP 1*14.2534, Press-screw connection female XPRT 25x2,5-3/4", 25-3/4” BSP 1*14.26100, Press-screw connection female XPRT 26x3,00-1"F, 26-1” BSP 1*14.2634, Press-screw connection female XPRT 26x3,00-3/4"F, 26-3/4” BSP 1*14.32100, Press-screw connection female XPRT 32x3,0-1", 32-1” BSP 1*14.32114, Press-screw connection female XPRT 32x3,0-1 1/4", 32-1 1/4” BSP 1*20.161216, Press-tee female XPRT 16x2,00-1/2"F-16x2,00, 16-1/2” BSP (F) 1*20.201220, Press-tee female XPRT 20x2,25-1/2"F-20x2,25, 20-1/2” BSP 1*20.2012201, Press-tee female XPRT 20x2,00-1/2"F-20x2,00, 20-1/2” BSP 1*20.203420, Press-tee female XPRT 20x2,25-3/4"F-20x2,25, 20-3/4” BSP 1*20.251225, Press-tee female XPRT 25x2,50-1/2"F-25x2,50, 25-1/2” BSP 1*20.253425, Press-tee female XPRT 25x2,50-3/4"F-25x2,50, 25-3/4” BSP 1*20.261226, Press-tee female XPRT 26x3,00-1/2"F-26x3,00, 26-1/2” BSP 1*20.263426, Press-tee female XPRT 26x3,00-3/4"F-26x3,00, 26-3/4” BSP 1*20.321232, Press-tee female XPRT 32x3,00-1/2"F-32x3,00, 32-1/2” BSP 1*20.323432, Press-tee female XPRT 32x3,00-3/4"F-32x3,00, 32-3/4” BSP 1*21.161216, Press tee MT 16x2,00-1/2”-16x2,00, 16-1/2” BSP (M) 1*21.253425, Press tee MT 25x2,50-3/4”-25x2,50, 25-3/4” BSP (M) 1*21.323432, Press tee MT 32x3,00-3/4”-32x3,00, 32-3/4” BSP (M) 1*23.161616, Press-T XPRT 16x2,00, 16mm 1*23.162016, Press-tee reduced XPRT 16x2,00-20x2,25-16x2,00, 16-20mm 1*23.1620161, Press-T reduced XPRT 16x2,00-20x2,00-16x2,00, 16-20mm 1*23.201616, Press-tee reduced XPRT 20x2,25-16x2,00-16x2,00, 16-20mm 1*23.2016161, Press-tee reduced XPRT 20x2,00-16x2,00-16x2,00, 16-2mm 1*23.201620, Press-T reduced XPRT 20x2,25-16x2,00-20x2,25, 16-20mm 1*23.2016201, Press-T reduced XPRT 20x2,00-16x2,00-20x2,00, 16-20mm 1*23.202016, Press-tee reduced XPRT 20x2,25-20x2,25-16x2,00, 16-20mm 1*23.2020161, Press-T reduced XPRT 20x2,00-20x2,00-16x2,00, 16-20mm 1*23.202020, Press-T XPRT 20x2,25, 20mm 1*23.2020201, Press-T XPRT 20x2,00, 20mm 1*23.2026201, Press-tee reduced XPRT 20x2,00-26x3,00-20x2,00, 20-26mm 1*23.202520, Press-tee reduced XPRT 20x2,25-25x2,50-20x2,25, 20-25mm 1*23.251616, Press-tee reduced XPRT 25x2,50-16x2,00-16x2,00, 16-25mm 1*23.251620, Press-tee reduced XPRT 25x2,50-16x2,00-20x2,25, 16-20-25mm 1*23.251625, Press-tee reduced XPRT 25x2,50-16x2,00-25x2,50, 16-25mm 1*23.252020, Press-tee reduced XPRT 25x2,50-20x2,25-20x2,25, 20-25mm 1*23.2520201, Press-tee reduced XPRT 25x2,50-20x2,00-20x2,00, 20-25mm 1*23.252025, Press-tee reduced XPRT 25x2,50-20x2,25-25x2,50, 20-25mm 1*23.2520251, Press-tee reduced XPRT 25x2,50-20x2,0-25x2,50, 20-25mm 1*23.252516, Press-tee reduced XPRT 25x2,50-25x2,5-16x2,00, 16-25mm 1*23.252520, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,25, 20-25mm 1*23.2525201, Press-tee reduced XPRT 25x2,50-25x2,50-20x2,00, 20-25mm 1*23.252525, Press-T XPRT 25x2,50, 25mm 1*23.253225, Press-tee reduced XPRT 25x2,50-32x3,00-25x2,50, 25-32mm 1*23.261616, Press-tee reduced XPRT 26x3,00-16x2,00-16x2,00, 16-26mm 1*23.2616201, Press-tee reduced XPRT 26x3,00-16x2,00-20x2,00, 16-20-26mm 1*23.261626, Press-tee reduced XPRT 26x3,00-16x2,00-26x3,00, 16-26mm 1*23.2620201, Press-tee reduced XPRT 26x3,00-20x2,00-20x2,00, 20-26mm 1*23.2620261, Press-tee reduced XPRT 26x3,00-20x2,00-26x3,00, 20-26mm 1*23.2626201, Press-tee reduced XPRT 26x3,00-26x3,00-20x2,00, 20-26mm 1*23.262626, Press-T XPRT 26x3,00, 26mm 1*23.321632, Press-tee reduced XPRT 32x3,00-16x2,00-32x3,00, 16-32mm 1*23.322032, Press-tee reduced XPRT 32x3,00-20x2,25-32x3,00, 20-32mm 1*23.3220321, Press-tee reduced XPRT 32x3,00-20x2,00-32x3,00, 20-32mm 1*23.322525, Press-tee reduced XPRT 32x3,00-25x2,50-25x2,50, 25-32mm 1*23.322532, Press-tee reduced XPRT 32x3,00-25x2,50-32x3,00, 25-32mm 1*23.322626, Press-tee reduced XPRT 32x3,00-26x3,00-26x3,00, 26-32mm 1*23.322632, Press-tee reduced XPRT 32x3,00-26x3,00-32x3,00, 26-32mm 1*23.323232, Press-T XPRT 32x3,00, 32mm 1*33.1616, Press-coupling XPRT 16x2,00, 16mm 1*33.2016, Press-coupling reduced XPRT 20x2,25-16x2,00, 16-20mm 1*33.20161, Press-coupling reduced XPRT 20x2,00-16x2,00, 16-20mm 1*33.2020, Press-coupling XPRT 20x2,25, 20mm 1*33.20201, Press-coupling XPRT 20x2,00, 20mm 1*33.2516, Press-coupling reduced XPRT 25x2,50-16x2,00, 16-25mm 1*33.2520, Press-coupling reduced XPRT 25x2,50-20x2,25, 20-25mm 1*33.25201, Press-coupling reduced XPRT 25x2,50-20x2,00, 20-25mm 1*33.2525, Press-coupling XPRT 25x2,50, 25mm 1*33.2616, Press-coupling reduced XPRT 26x3,00-16x2,00, 16-26mm 1*33.26201, Press-coupling reduced XPRT 26x3,00-20x2,00, 20-26mm 1*33.2626, Press-coupling XPRT 26x3,00, 26mm 1*33.3216, Press-coupling reduced XPRT 32x3,00-16x2,00, 16-32mm 1*33.3220, Press-coupling reduced XPRT 32x3,00-20x2,25, 20-32mm 1*33.3225, Press-coupling reduced XPRT 32x3,00-25x2,50, 25-32mm 1*33.3226, Press-coupling reduced XPRT 32x3,00-26x3,00, 26-32mm 1*33.3232, Press-coupling XPRT 32x3,00, 32mm 1*52.1616, Press-adapter for PE pipes 16x2,0-PER 16x1,5 (16/13), 16mm 1*52.2020, Press-adapter for PE pipes 20x2,25-PER 20x1,9, 20mm 1*53.161215, Press radiator connection elbow 16x2,0-150 mm-Cu 12, 16-12mm 1*53.161515, Press radiator connection elbow 16x2,0-150 mm-Cu 15, 16-15mm 1*53.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*54.161512, Press-connection MT 16x2,0-1/2-Cu 15mm, 16-1/2” BSP (M) 1*54.1610 (B), Press-adapter for copper pipes 16x2,0-Cu 10, 16-10mm 1*54.1612 (B), Press-adapter for copper pipes 16x2,0-Cu 12, 16-12mm 1*54.1615 (B), Press-adapter for copper pipes 16x2,0-Cu 15, 16-15mm 1*54.16161 (B), Press-adapter for copper pipes 16x2,0-Cu 16, 16-16mm 1*54.2018 (B), Press-adapter for copper pipes 20x2,25-Cu 18, 20-18mm 1*54.2022 (B), Press-adapter for copper pipes 20x2,25-Cu 22, 20-22mm 1*54.2522 (B), Press-adapter for copper pipes 25x2,5-Cu 22, 25-22mm 1*54.2528 (B), Press-adapter for copper pipes 25x2,5-Cu 28, 25-28mm 1*54.3228 (B), Press-adapter for copper pipes 32x3,0-Cu 28, 32-28mm 1*54.2022118, Press-connection MT 20x2,25-1 1/8-Cu 22mm, 20-1 1/8mm 1*54.2522118, Press-connection MT 25x2,5-1 1/8-Cu 22mm, 25-1 1/8mm 1*55.16, Press-plug 16x2,0, 16mm 1*55.20, Press-plug 20x2,25, 20mm 1*56.161512, Press-elbow 90° MT 16x2,0-1/2-Cu 15mm, 16-1/2mm 1*63.161535, Press radiator connection elbow 16x2,0-330 mm-Cu 15, 16-15mm 1*63.201535, Press radiator connection elbow 20x2,25-330 mm-Cu 15, 20-15mm 1*75.16, Press-tab connection for wall 16x2,0-1/2, 16-1/2” BSP 1*76.16, Press-UPS-connection elbow 16x2,0-1/2, 16-1/2” BSP 1*81.16, Press-UPS-connection elbow - Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.16L, Press-UPS-connection elbow – Multifix 16x2,0-1/2, 16-1/2” BSP 1*81.20, Press-UPS-connection elbow - Multifix 20x2,25-1/2, 20-1/2” BSP (*) 7 or 9, where 7 is for tin plated fittings, and 9 for non tin plated fittings 703.4040*, Press-elbow 90° XPRT 40x4,00-40x4,00, 40mm 704.4040*, Press-elbow 45° XPRT 40x4,00-40x4,00, 40mm 710.40112*, Press-connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 710.40114*, Press-connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 711.40112*, Press-connection male XPRT 40x4,00-1-1/2"M, 40-1 1/2” BSP 711.40114*, Press-connection male XPRT 40x4,00-1-1/4"M, 40-1 1/4” BSP 714.40112*, Press-screw connection female XPRT 40x4,00-1 1/2"F, 40-1 1/2” BSP 714.40114*, Press-screw connection female XPRT 40x4,00-1 1/4"F, 40-1 1/4” BSP 720.4010040*, Press-T female XPRT 40x4,00-1"F-40x4,00, 40-1” 723.402040*, Press-T reduced XPRT 40x4,00-20x2,25-40x4,00, 20-40mm 723.4020401*, Press-T reduced XPRT 40x4,00-20x2,00-40x4,00, 20-40mm 723.402540*, Press-T reduced XPRT 40x4,00-25x2,50-40x4,00, 25-40mm 723.402640*, Press-T reduced XPRT 40x4,00-26x3,00-40x4,00, 26-40mm 723.403232*, Press-T reduced XPRT 40x4,00 - 32x3,00 - 32x3,00, 32-40mm 723.403240*, Press-T reduced XPRT 40x4,00-32x3,00-40x4,00, 32-40mm 723.404040*, Press-T XPRT 40x4,00-40x4,00-40x4,00, 40mm 733.4025*, Press-coupling reduced XPRT 40x4,00-25x2,50, 25-40mm 733.4026*, Press-coupling reduced XPRT 40x4,00-26x2,50, 26-40mm 733.4032*, Press-coupling reduced XPRT 40x4,00-32x3,00, 32-40mm 733.4040*, Press-coupling XPRT 40x4,00-40x4,00, 40mm 703.5050*, Press-elbow 90° XPRT 50x4,50-50x4,50, 50mm 704.5050*, Press-elbow 45° XPRT 50x4,50-50x4,50, 50mm 710.50112*, Press-connection female XPRT 50x4,50-1 1/2"F, 50-1 1/2” BSP 711.50112*, Press-connection male XPRT 50x4,50-1-1/2"M, 50-1 1/2” BSP 711.50200*, Press-connection male XPRT 50x4,50-2"M, 50-2” BSP 714.50200*, Press-screw connection female XPRT 50x4,50-2"F, 50-2” BSP 720.5010050*, Press-T female XPRT 50x4,50-1"F-50x4,50, 50-1” BSP 723.502550*, Press-T reduced XPRT 50x4,50-25x2,50-50x4,50, 25-50mm 723.502650*, Press-T reduced XPRT 50x4,50-26x3,00-50x4,50, 26-50mm 723.503250*, Press-T reduced XPRT 50x4,50-32x3,00-50x4,50, 32-50mm 723.504050*, Press-T reduced XPRT 50x4,50-40x4,00-50x4,50, 40-50mm 723.505050*, Press-T XPRT 50x4,50-50x4,50-50x4,50, 50mm 733.5032*, Press-coupling reduced XPRT 50x4,50-32x3,00, 32-50mm 733.5040*, Press-coupling reduced XPRT 50x4,50-40x4,00, 40-50mm 733.5050*, Press-coupling XPRT 50x4,50-50x4,50, 50mm 703.6363*, Press-elbow 90° XPRT 63x6,00-63x6,00, 63mm 704.6363*, Press-elbow 45° XPRT 63x6,00-63x6,00, 63mm 710.63200*, Press-connection female XPRT 63x6,00-2"F, 63-2” BSP 711.63200*, Press-connection male XPRT 63x6,00-2"M, 63-2” BSP 714.63200*, Press-screw connection female XPRT 63x6,00-2"F, 63-2” BSP (F) 720.6310063*, Press-T female XPRT 63x6,00-1"F-63x6,00, 63-1” BSP 723.632563*, Press-T reduced XPRT 63x6,00-25x2,50-63x6,00, 25-63mm 723.632663*, Press-T reduced XPRT 63x6,00-26x2,50-63x6,00, 26-63mm 723.633263*, Press-T reduced XPRT 63x6,00-32x3,00-63x6,00, 32-63mm 723.634063*, Press-T reduced XPRT 63x6,00-40x4,00-63x6,00, 40-63mm 723.635063*, Press-T reduced XPRT 63x6,00-50x4,50-63x6,00, 50-63mm 723.636363*, Press-T XPRT 63x6,00-63x6,00-63x6,00, 63mm 733.6340*, Press-coupling reduced XPRT 63x6,00-40x4,00, 40-63mm 733.6350*, Press-coupling reduced XPRT 63x6,00-50x4,50, 50-63mm 733.6363*, Press-coupling XPRT 63x6,00-63x6,00, 63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings All the above fittings can be used with the following pipe sizes: , , Supplier: WRW, 101.16025, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 101.16XXX XXX=length of coil, AIS MLP PERT/ Al/PERT 16x2- coil, box- Supplier: WRW, 101.20100, AIS MLP PERT/ Al/PERT 20x2,25 - coil, box- Supplier: WRW, 101.20101, AIS MLP PERT/ Al/PERT 20x2- coil, box- Supplier: WRW, 101.25050, AIS MLP PERT/ Al/PERT 25x2,5- coil, box- Supplier: WRW, 101.26050, AIS MLP PERT/ Al/PERT 26x3- coil, box- Supplier: WRW, 101.32050, AIS MLP PERT/ Al/PERT 32x3- coil, box- Supplier: WRW, 102.16004, AIS MLP PERT/ Al/PERT 16x2 -bar- Supplier: WRW, 102.20004, AIS MLP PERT/ Al/PERT 20x2,25-bar- Supplier: WRW, 102.20104, AIS MLP PERT/ Al/PERT 20x2-bar- Supplier: WRW, 102.25004, AIS MLP PERT/ Al/PERT 25x2,5-bar- Supplier: WRW, 102.26004, AIS MLP PERT/ Al/PERT 26x3-bar- Supplier: WRW, 102.32004, AIS MLP PERT/ Al/PERT 32x3-bar- Supplier: WRW, 102.40004, AIS MLP PERT/ Al/PERT 40x4-bar- Supplier: WRW, 102.50004, AIS MLP PERT/ Al/PERT 50x4,5-bar- Supplier: WRW, 102.63004, AIS MLP PERT/ Al/PERT 63x6-bar- Supplier: WRW, 104.16100, AIS MLP PERT/ Al/PERT 16x2 -coil, no box- Supplier: WRW, 104.20100, AIS MLP PERT/ Al/PERT 16x2-coil, no box- Supplier: WRW, 104.20101, AIS MLP PERT/ Al/PERT 20x2-coil, no box- Supplier: WRW, 104.25050, AIS MLP PERT/ Al/PERT 25x2,5-coil, no box- Supplier: WRW, 104.26050, AIS MLP PERT/ Al/PERT 26x3-coil, no box- Supplier : Maincor, 816001400x x=3 or 5 (m), AIS MLP PERT/ Al/PERT , in bars: d=16x2mm 8160014xxx xxx= length of coil , AIS MLP PERT/ Al/PERT , in coils: d=16x2mm , 020061400x x=3 or 5 (m), MLP, in bars: d=20x2mm , 0200614xxx xxx= length of coil, MLP, in coils: d=20x2mm , 820001400x x=3 or 5 (m), MLP, in bars: d=20x2,25mm , 8200014xxx xxx= length of coil, MLP, in coils: d=20x2,25mm , 825001400x x=3 or 5 (m), MLP, in bars: d=25x2,5mm , 8250014xxx xxx= length of coil, MLP, in coils: d=25x2,5mm , 826001400x x=3 or 5 (m), MLP, in bars: d=26x3mm , 8260014xxx xxx= length of coil, MLP, in bars: d=26x3mm , 832001400x x=3 or 5 (m), MLP, in bars: d=32x3mm , 8320014050 only 50m coil available, MLP, in coils: d=32x3mm , 8400014005, MLP, in bars: d=40x4mm , 10150451, MLP, in bars: d=50x4,5mm , 10160601, MLP, in bars: d=63x6mm Models added April 2024: 723.324032*, Press-T reduced XPRT 32x3,00-40x4,00-32x3,00, 32-40mm 723.402532*, Press-T reduced XPRT 40x4,00-25x2,50-32x3,00, 25-40mm 723.405040*, Press-T reduced XPRT 40x4,00-50x4,50-40x4,00, 40-50mm 723.502540*, Press-T reduced XPRT 50x4,50-25x2,50-40x4,00, 25-50mm 723.506350*, Press-T reduced XPRT 50x4,50-63x6,00-50x4,50, 50-63mm (*) ending in F or w/o F, where w/o F is for tin plated fittings, and ending in F for non tin plated fittings Models added May 2024; P703.1616, PPSU Press-elbow 90° P703.2020, PPSU Press-elbow 90° P703.2525, PPSU Press-elbow 90° P703.3232, PPSU Press-elbow 90° P723.161616, PPSU Press-Tee P723.162016, PPSU Press-Tee P723.202020, PPSU Press-Tee P723.201616, PPSU Press-Tee P723.201620, PPSU Press-Tee P723.202016, PPSU Press-Tee P723.252525, PPSU Press-Tee P723.251625, PPSU Press-Tee P723.252020, PPSU Press-Tee P723.252025, PPSU Press-Tee P723.323232, PPSU Press-Tee P723.322032, PPSU Press-Tee P723.322532, PPSU Press-Tee P723.322525, PPSU Press-Tee P733.1616, PPSU Press-coupling P733.2020, PPSU Press-coupling P733.2016, PPSU Press-coupling P733.2525, PPSU Press-coupling P733.2516, PPSU Press-coupling P733.2520, PPSU Press-coupling P733.3232, PPSU Press-coupling P733.3225, PPSU Press-coupling P701.2634, PPSU male press elbow P711.20341, PPSU male press connection P711.2634, PPSU male press connection P723.2620201, PPSU Press-Tee P723.2620261, PPSU Press-Tee P723.3220321, PPSU Press-Tee P733.25201, PPSU Press-coupling P733.2616, PPSU Press-coupling

Product Images

Approval Holder:

MULTICAPAS INDUSTRIAL SLU

Company Name

MULTICAPAS INDUSTRIAL SLU

Address

C/INDUSTRIAS 4, OF. 10-11 ALCORCÓN MADRID

Postcode

28923

Country

Spain

General Email

emendez@aisoutnovation.com

View All Listings by this Company