Directory Search Results

Print List

#2107105

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2107105
Note:
Open outlet use only.
Size:
2” BSP (M)
Marking:
Kohler and model number on valve body
Installation Requirements:
R001 R571
Expiry date:
31/07/2026
Model:
1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).

Approval Holder:
Kohler (Thailand) Public Company Limited
Company Name
Kohler (Thailand) Public Company Limited
Address
16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422

View All Listings by this Company

Print This Approval


#2105044

Range of domestic hot water units incorporating instantaneous or semi-instantaneous plate heat exchanger assemblies. The product incorporates a motorised control valve, managed primary and secondary pumps (see model), and a drain valve on both circuits. Maximum working pressures: 10.0 bar primary, 9.5 bar secondary. Maximum operating temperatures: 110°C primary, 85°C secondary.

Section:
1350 Heat Exchangers
Size:
1 ¼” BSP (F) on both primary and secondary circuits.
Marking:
Cetetherm SAS, AQUAFIRST, Max working pressure/temperature for primary and secondary circuits, serial number, article number and year of manufacture (YYYY) on adhesive label on heat exchanger frame.
Installation Requirements:
R001 R140 R360
Expiry date:
31/05/2026
Model:
AQUAFIRST 2000/4000/6100/8000 series: Flxxnnyy FI = Aquafirst range xx = 20: 2000 M3 Plates serie (differentiation on primary side). 40: 4000 M3 Plates serie (differentiation on primary side). 61: 6100 M6 Plates serie (differentiation on primary side and secondary pump). 80: 8000 M6 Plates serie (differentiation on primary side and secondary pump). nn = 07 up to 55 for the number of gasketed plates. yy = IS: Instantaneous (no pump on DHW) with single primary pump ID: Instantaneous (no pump on DHW) with twin head primary pump SS: Semi-instantaneous with one primary pump and one DHW pump DS: Semi-instantaneous with twin head primary pump and one DHW pump DD: Semi-instantaneous with twin head primary pump and two DHW pump Article Number: FI2007IS. FI2007ID. FI2007SS. FI2007DS. FI2007DD. FI2017IS. FI2017ID. FI2017SS. FI2017DS. FI2017DD. FI4027IS. FI4027ID. FI4027SS. FI4027IS. FI4027DD. FI4045IS. FI4045ID. FI4045SS. FI4045DS. FI4045DD. FI6113IS. FI6113ID. FI6113SS. FI6113DS. FI6113DD. FI6123IS. FI6123ID. FI6123SS. FI6123DS. FI6123DD. FI8031IS. FI8031ID. FI8031SS. FI8031DS. FI8031DD. FI8055IS FI8055ID FI8055SS FI8055DS FI8055DD.

Approval Holder:
CETETHERM SAS
Company Name
CETETHERM SAS
Address
Route du stade ZI du moulin Pontcharra sur Turdine
Postcode
69490
Country
France
General Email
jeanmichel.montoni@cetetherm.com

View All Listings by this Company
Manufacturer:
CETETHERM SAS
Company Name
CETETHERM SAS
Address
Route du stade ZI du moulin Pontcharra sur Turdine
Postcode
69490
Country
France
General Email
jeanmichel.montoni@cetetherm.com

View All Listings by this Company

Print This Approval


#2104019

Range of unvented electric storage water heaters consisting of a mild steel, glass/enamel coated tank, heating element and pressure relief valve set at 6.0 bar. Maximum working pressure 5.5 bar. Maximum operating temperature 75°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2104019
Size:
½” BSP (M) inlets and outlets
Marking:
Hyco logo on front of appliance. Technical information on adhesive label on side of appliance.
Installation Requirements:
R001 R140
Expiry date:
30/04/2026
Model:
Unvented 2kW version: SF05K (5 litre), SF10K (10 litre) & SF15K (15 litre). Unvented 1.2kW version: SF10K12 (10 litre) & SF15K12 (15 litre).

Approval Holder:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2109322

Range of ice making machines. The inlet supply is controlled by a solenoid valve. Inlet hose supplied. Maximum working pressure 5.0 bar. Cold water use only.

Section:
1500 Ice Making Machine(s)
Size:
¾” BSP (M)
Marking:
Scotsman, model number, date of manufacture (YYMM) and other product information on adhesive label on panel.
Installation Requirements:
R001 R009 R150 R171
Expiry date:
30/09/2026
Proviso:
Discharge to drain must be via a type `AA` `AB` or `AD` airgap or in accordance with EN 1717
Model:
Scotsman AC206, AC226, EC 206, EC226, Scotsman MC46, MC1210

Approval Holder:
Scotsman Ice Srl
Company Name
Scotsman Ice Srl
Address
Via Lainate 31 20010 Pogliano Milanese
Country
Italy
Phone
+39 02 93550500

View All Listings by this Company
Manufacturer:
Scotsman Ice Srl
Company Name
Scotsman Ice Srl
Address
Via Lainate 31 20010 Pogliano Milanese
Country
Italy
Phone
+39 02 93550500

View All Listings by this Company

Print This Approval


#2105313

Range of flow meters incorporating black epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
See model
Marking:
GWF, Nominal diameter, year of manufacture (YYYY), temp class, install conditions, max pressure, type edge (meter type) manufacturer & other technical information on data label on meter housing
Installation Requirements:
R001
Expiry date:
31/05/2026
Model:
Sonico Edge Range Available in the following sizes: Inlet 50mm Length 200mm, 270mm & 300mm Inlet 65mm Length 200mm & 300mm Inlet 80mm Length 200mm, 225mm, 300mm, 350mm, 370mm & 413mm Inlet 100mm Length 250mm, 350mm, 360mm, 370mm & 483mm Inlet 125mm Length 250mm Inlet 150mm Length 300mm & 500mm

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#2106022

Range of water meter manifolds incorporating DZR brass bodies, PTFE washers, a non-return valve and ball valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
¾” BSP (F) inlet and outlet
Marking:
MWM, CR & flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
WBBADAPT112-BV

Approval Holder:
MWM Distributors Ltd
Company Name
MWM Distributors Ltd
Address
Units 52 & 53 Enfield Industrial Estate Windsor Road
Postcode
B97 6DE
Country
Redditch
Phone
+44 (0) 1527 68200
General Email
sales@mwmdistributorltd.com

View All Listings by this Company

Print This Approval


#2104702

`Groundbreaker Mk3` water meter box incorporating a concentric water meter manifold (plastic body) with screw down stop valve, single check valve (verified by test as suitable for backflow prevention up to fluid category 2) & compression fittings. The product is intended to be installed upon the external wall of a premises and incorporates internal insulation (insulation not verified by test). For use with MDPE pipe (manufactured to EN12201). Maximum working pressure 12.0 bar. Cold water use only.

Section:
1525 Meter Chambers - Wall Mounted
Size:
25mm compression.
Marking:
Groundbreaker logo on cover
Installation Requirements:
R001 R415 R430
Expiry date:
1/05/2026
Model:
Groundbreaker Mk3

Approval Holder:
Steve Leigh & Associates Ltd
Company Name
Steve Leigh & Associates Ltd
Address
13 Farriers Road Stowmarket Suffolk
Postcode
IP14 2NS
Phone
01449 673 451
General Email
sales@groundbreaker.co.uk

View All Listings by this Company

Print This Approval


#2109035

Range of flow and temperature sensors with stainless steel bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:
1530 Miscellaneous Fittings
Marking:
Droople & flow arrow on body
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
SAR-FT-BSP-MM12, SAR-FT-BSP-MM34 & SAR-FT-BSP-MM1.

Approval Holder:
Droople SA
Company Name
Droople SA
Address
Route du Verney 18, 1070 Puidoux
Country
Switzerland

View All Listings by this Company

Print This Approval


#2109321

Range of circulation fittings with gun metal bodies, plastic cones & guides and EPDM ‘O’ rings. The products incorporate a dynamic venturi valve. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
1530 Miscellaneous Fittings
Size:
see model
Marking:
Kemper’s logo, flow arrow, DN and PN on body.
Installation Requirements:
R001
Expiry date:
30/09/2026
Model:
6501001500 - DN15 x ½” BSP (F) 6501002000 - DN20 x ¾” BSP (F) 6501002500 - DN25 x 1” BSP (F) 6501003200 - DN32 x 1 ¼” BSP (F) 6501004000 - DN40 x 1 ½” BSP (F) 6501005000 - DN50 x 2” BSP (F) 6502001500 - DN15 x ½” BSP (F) 6502002000 - DN20 x ¾” BSP (F) 6502002500 - DN25 x 1” BSP (F) 6502003200 - DN32 x 1 ¼” BSP (F) 6502004000 - DN40 x 1 ½” BSP (F) 6502005000 - DN50 x 2” BSP (F) 6501201500 - DN15 x ¾” BSP (M) 6501202000 - DN20 x 1” BSP (M) 6501202500 - DN25 x 1 ¼” BSP (M) 6501203200 - DN32 x 1 ½” BSP (M) 6501204000 - DN40 x 1 ¾” BSP (M) 6501205000 - DN50 x 2 3/8” BSP (M)

Approval Holder:
Gebr. Kemper GmbH+Co. KG
Company Name
Gebr. Kemper GmbH+Co. KG
Address
Harkortstr. 5 Olpe
Postcode
57462
Country
Germany
Phone
+49 2761 8910
General Email
h.u.gall@gall-engineering.de

View All Listings by this Company

Print This Approval


#2105010

Range of multistage centrifugal pumps with stainless steel (AISI 304) bodies and impellers, and EPDM ‘O’-rings. Maximum working pressure 12.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2105010
Size:
3” BSP (F) inlet x 2½” BSP (F) outlet.
Marking:
Pedrollo S.p.A. logo and model on body. PEDROLLO, CE, model, maximum temperature, and other technical information on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/05/2026
Model:
FCR 15/2. FCR 15/3. FCR 15/4. FCR 15/5. FCR 30/2. FCR 30/3. FCR 30/4.

Approval Holder:
Pedrollo Spa
Company Name
Pedrollo Spa
Address

View All Listings by this Company
Manufacturer:
Pedrollo Spa
Company Name
Pedrollo Spa
Address

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 5 of 247

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.