Range of plate heat exchangers with stainless steel plates, for primary and secondary circulation. Models E040-2M-GB6 and R040-H2M-G6B are secondary use only. Maximum working pressure - R040-HNM-G6B range = 30.0 Bar and E040-NM-GB6 range = 20.0 Bar Maximum operating temperature - 99 °C

Section:

1350 Heat Exchangers

Size:

3/4" BSP Male

Marking:

Kaori Logo, Model, Max Pressure & Max Temp on Adhesive Label on Body. Model on Top Plate.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

R040-HNM-G6B - “N” = Number of plates 2-40 plates E040-NM-GB6 - “N” = Number of plates 2-60 plates

Approval Holder:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Manufacturer:

Kaori Heat Treatment Co., Ltd

Company Name

Kaori Heat Treatment Co., Ltd

Address

No 5-2 Chi Lin North Road Chung Li District 320030

View All Listings by this Company

Alfa Laval range of copper brazed and stainless-steel fusion bonded, stainless steel heat exchangers in various sizes ranging from 4 plates to 300 plates. Maximum working pressures and temperatures: CB10, CB11, CB15, CB16, CB16AQ, CB18, CB18AQ & CB18DW: S1/S2 circuit: 5 Bar. S3/S4 circuit 10 Bar. Max working temperature 150°C. CB20 & CB20AQ: S1/S2 circuit: 16 Bar. S3/S4 circuit 16 Bar. Max working temperature 225°C. CB65, CB65AQ & CBH65: S1/S2 circuit: 18 Bar. S3/S4 circuit 37 Bar. Max working temperature 225°C. CBH16 & CBH18: S1/S2 circuit: 32 Bar. S3/S4 circuit 32 Bar. Max working temperature 150°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC. Models added March 2023: CBH30: 50 Bar (S1/S2/S3/S4) & 225.0°C, CBH112: 45 Bar (S1/S2) 51 Bar (S3/S4) & 225.0°C, CB30: 41 Bar (S1/S2/S3/S4) & 225.0°C, CB60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB60AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH60: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB62AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CBH62: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB30AQ: 40 Bar (S1/S2/S3/S4) & 225.0°C, CB110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB110AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CBH110: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB112AQ: 37 Bar (S1/S2/S3/S4) & 225.0°C, CB24: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, CB24AQ: 29 Bar (S1/S2) 37 Bar (S3/S4) & 225.0°C, ANTW66: 29.0 Bar (S1/S2/S3/S4), ANTW18: 23 Bar (S1/S2) 28 Bar (S3/S4) 225.0°C and RM11: 15 Bar (S3/S4) & 225.0°C. Maximum operating temperatures detailed above are for primary circuits only, secondary circuits approved to 99oC.

Section:

1350 Heat Exchangers

Size:

See Models

Marking:

CB10, CB15, CB16, CB18 models: Manufacturers logo, model number and technical information on label on from of heat exchanger. CB20 and CB65 models: Manufacturers logo, model number, serial number, manufacturing date (yyyy.mm.dd), minimum and maximum working temperature, minimum and maximum working pressure and technical information on label on front of heat exchanger. Models added March 2023: Alfa Laval logo, Model, serial number on adhesive label.

Installation Requirements:

R001

Expiry date:

31/10/2027

Model:

CB10: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB11: Minimum number of plates 8, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB15: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16/CBH16: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB16AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18/CBH18: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB18AQ: Minimum number of plates 4, Maximum number of plates 60. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections. CB18DW: Minimum number of plates 4, Maximum number of plates 52. Connection Size/types: None O-ring, ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20: Minimum number of plates 10, Maximum number of plates 110. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB20AQ: Minimum number of plates 10, Maximum number of plates 110. Connection Size/types: ¾” or 1” Male BSP connections. CB65/CBH65: Minimum number of plates 10, Maximum number of plates 150. Connection types: External thread or soldered. Connection Size/types: ¾” or 1” Male BSP connections or 12mm or 28mm soldered connections for use with copper tube conforming to EN 1057. CB65AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” or 1” Male BSP connections Models added March 2023: CB30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB30AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH30: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB60AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH60: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB62AQ: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CBH62: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M. CB110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB110AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH110: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CB112AQ: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. CBH112: Minimum number of plates 10, Maximum number of plates 300. Connection Size/types: ¾” - 2” BSP M. RM11: Minimum number of plates 28, Maximum number of plates 28. Connection Size/types: 22mm ID - soldered connection for use with copper tube conforming to EN 1057. CB24: Minimum number of plates 10, Maximum number of plates 56. Connection Size/types: ¾” - 2” BSP M. ANTW18: Minimum number of plates 10, Maximum number of plates 50. Connection Size/types: ¾” - 2” BSP M. ANTW66: Minimum number of plates 10, Maximum number of plates 150. Connection Size/types: ¾” - 2” BSP M.

Approval Holder:

Alfa Laval Ltd

Company Name

Alfa Laval Ltd

Address

Doman Road Camberley Surrey

Postcode

GU15 3DN

View All Listings by this Company

Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2207373

Size:

Secondary: 15mm compression. Primary: 22mm compression.

Marking:

KESTON printed on front casing. Model and size printed on drop down door.

Installation Requirements:

R001 R140 R360

Expiry date:

31/07/2027

Proviso:

Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Model:

KESTON COMBI² C30 & KESTON COMBI² C35 COMBINATION BOILERS

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Range of air- or water-cooled commercial ice making machines with flow controlled via solenoid valve. Maximum working pressure 5 Bar

Non-metallic materials and components comply with BS6920 at 35°C

Section:

1500 Ice Making Machines

Size:

PVC lined flexible hose assembly with 3/4" BSP captive nut end connections.

Marking:

Scotsman on front panel. Scotsman, product name, operating info, on label on rear panel.

Installation Requirements:

R001 R150 R171 R511

Expiry date:

31/01/2028

Model:

NU100AS NU100WS NU150AS NU150WS NU220AS NU220WS NU300AS NU300WS

Product Images

Approval Holder:

Scotsman Ice Systems (Suzhou) Co. Ltd

Company Name

Scotsman Ice Systems (Suzhou) Co. Ltd

Address

Building 5, No. 525 South Lingang RD, Yuewang, Shaxi Town, TaicangCity, China 215437

View All Listings by this Company

Manufacturer:

Scotsman Ice Systems (Suzhou) Co. Ltd

Company Name

Scotsman Ice Systems (Suzhou) Co. Ltd

Address

Building 5, No. 525 South Lingang RD, Yuewang, Shaxi Town, TaicangCity, China 215437

View All Listings by this Company

Range of commercial air or liquid cooled ice making machines with water controlled via solenoid valve. Maximum working pressure 5.5 Bar COLD WATER USE

Section:

1500 Ice Making Machines

Size:

PVC lined flexible hose with ¾” bps captive nut end connections

Marking:

Manitowoc on front panel, model, operating info on label on back panel

Installation Requirements:

R001 R150 R171 R511

Expiry date:

31/01/2028

Model:

U(*)P0140A-251*, U(*)P0240A-251*, U(*)P0310A-251*, UGP0020A-251*, UGP0030A-251*, UGP0040A-251*, UGP0050A-251*, UGP0080A-251* Notes: U – U series (NEO) ice maker; UG – Sotto series ice maker (*) – D, Y or R. Dependent on ice cube size, D-Dice, Y-Half Dice, R-regular P –R290 (propane) Refrigerant 0140, 0240, 0310,0020,0030,0040,0050,0080 – Nominal ice production per day A – Air cooled; W-Water cooled 251 –Electrical configuration (220-240V/50Hz/ 1 Phase) *– Character(s) indicating customer/country specific options

Product Images

Approval Holder:

Manitowoc Ice, Inc

Company Name

Manitowoc Ice, Inc

Address

2110 S. 26 St Manitowoc WI 54220

Country

USA

View All Listings by this Company

Manufacturer:

Pentair Commercial Ice LLC

Company Name

Pentair Commercial Ice LLC

Address

5500 Wayzata Blvd. Suite 900 Golden Valley, MN

Postcode

55416

Country

United States

View All Listings by this Company

Range of static ultrasonic bulk water meters with stainless steel bodies and EPDM 'O'-rings. The products are supplied with two sets of optional (green) gaskets. Maximum operating temperature: Products marked T50: 65°C. Products marked T30: cold water use only.

Section:

1505 Water Meters

Size:

DN50 - DN100 flanged inlet and outlet.

Marking:

DIEHL METERING, CE, DN, maximum pressure, model name, T30 or T90, and other technical info on meter housing. Diehl Metering GmbH logo and flow arrow on body.

Installation Requirements:

R001 R008 R120

Expiry date:

31/03/2027

Model:

HYDRUS 2.0 Type 174 stainless steel (DN50-80: 200mm length, DN100: 250mm length).

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

Industriestraße 13 91522 Ansbach

Country

Germany

View All Listings by this Company

Range of water meters with a stainless-steel bodies. Maximum working pressure 16.0 Bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

See model.

Marking:

Cap ARAD and Octave Body Flow Arrow and Size Adhesive Label on Meter. ARAD, DN, Octave, CE, and Other Technical Info.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

OCTAVE RANGE 13910020V402 - DN50 13920020V402 - DN65 13930020V402 - DN80 13940020V402 - DN100 13900020V402 - DN125 13950020V402 - DN150

Product Images

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Range of differential (DPI) or relative (RPI) pressure sensors (with or without temperature transmitter) with stainless steel bodies and EPDM ‘O’-rings. The DPI2 model consists of a sensor and fitting for a capillary tube which is used for measuring the differential pressure between either sides of the sensor. Maximum working pressure 30.0 Bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

Sensor alone: ½” BSP (M). Sensor with adaptor: ¼" NPT (M), ½" NPT (M), ½" BSPP (M). Capillary tube (DPI2 models): ¼" BSPT (M).

Marking:

Grundfos name and logo, model, product no., version no., series no., technical information, and manufacturing country on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

DPI2 sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF DPI2 with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be DPI Range and unit: [B] - Of no importance to wetted parts* Gen.: [C] - Must be 2 Output: [D] Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] Of no importance to wetted parts* Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts Materials: [G] - Must be either -- or -B, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. RPI sensor alone: AAA/B.B-BBB B/C/D/E E.EE EE/FFF RPI with or without accessories: AAA/B.B-BBB B/C/D/E E.EE EE/FFF/GG/HHH/IIII Product: [A] - Must be RPI Range and unit: [B] - Of no importance to wetted parts*, Gen.: [C] - Of no importance to wetted parts*, Output: [D] - Of no importance to wetted parts* (+T = temperature transmitter), Cable: [E] - Of no importance to wetted parts*, Sealing: [F] - The first character must be E, second and third character have no importance to wetted parts, Materials: [G] - Must be either -- or -S, Connection: [H] - 02N or 03P or 02B or --, Packaging: [I] - Of no importance to wetted parts*. Code for sealing [F]: “E” = EPDM ‘O’-rings. Code for materials [G]: "B" = brass fitting, "S" = stainless steel fitting, "--" = sensor only (w/o accessory). Code for connection [H]: "02N" = 1/4" NPT, "02B" = 1/4" BSPT, "03N" = 1/2" NPT, "03P" = 1/2" BSPP, "---" = sensor only (w/o accessory). * All characters are allowed.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Manufacturer:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘Alpha’ range of circulator pumps with either a composite (plastic) or stainless steel body, plastic impellor and EPDM ‘O’-rings. The Alpha 1 model B CIL3 has a black motor housing. The Alpha 1 model B and the Alpha 2 model E stainless steel body models have either a black or red motor housing. All other models have a red motor housing. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210907

Note:

R008 does not apply to the stainless steel body models.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1¼” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and model on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008

Expiry date:

31/10/2027

Model:

ALPHA1 **1-**2 N ***3 model B & ALPHA2 **1-**2 N ***3 model B/C/D/E. ALPHA1 **1-**2 CIL3 model B Where: **1 = size of inlet/outlet connection: 20 = 1 ¼”, 15 & 25 = 1 ½”, 32 = 2”. **2 = maximum head (dm): 40, 45, 50, 50/60, 60 & 80. N denotes stainless steel body. CIL3 denotes pump with composite (plastic body). ***3 = port to port length: 130, 150 & 180mm. (Note CIL3 model does not include a port length as it is only available in one size: 130mm). B/C/D/E indicates electronic options. For example: ALPHA2 25-50 N 130 model B. Alpha 2 pump type with 1 ½ BSP (M) inlet/outlet, 50 maximum head (dm), stainless steel pump housing and 130mm port to port length.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of water pressure booster pumps, comprising of a multi-stage pump with a brass body, and an expansion vessel. The product is supplied with a strainer and two stainless steel braided EPDM lined flexible hose assemblies. The outlet assembly incorporates a non-return valve, not suitable for backflow protection. Maximum working pressure models 46601 and 46602 6.0 bar, models 46622 and 46624 9.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211024

Size:

1” BSP (F) (to strainer).

Marking:

STUART TURNER, CE, model number, maximum temperature, maximum pressure and other technical Info on adhesive label on pump.

Installation Requirements:

R001 R415

Expiry date:

30/11/2027

Model:

46601: Stuart CH 4-30 PS, 46602: Stuart CH 4-40 PS, 44622: Stuart CH 4-50 PS, 44624: Stuart CH 4-60 PS.

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of centrifugal multi-stage horizontal pressure booster pumps with brass bodies. The 46593, 46594, 46595 and 46610 models include a non-return valve (not suitable for backflow protection) and an expansion vessel. They are also supplied inline strainer and two stainless steel braided EPDM lined flexible hose assemblies with 1” captive nut x 1" BSP (M) end connection for the inlet and outlet. Maximum working pressure models 46578, 46596, 46605 and 46606: 6.0 bar, Models 46593, 46594, 46595 and 46610: 9.0 bar. Maximum operating temperature 65°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211047

Size:

46578, 46596, 46605 and 46606 models: 1” BSP (F). 46593, 46594, 46595 and 46610 models: 1” BSP (F) (to strainer).

Marking:

Stuart Turner and Stuart Turner logo on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/11/2027

Model:

46578: Stuart CH 4-30 FL, 46596: Stuart CH 4-40 FL, 46605: Stuart CH 4-50 FL, 46606: Stuart CH 4-60 FL. 46593: Stuart CH 4-30 B (with hoses), 46594: Stuart CH 4-40 B (with hoses), 46595: Stuart CH 4-50 B (with hoses), 46610: Stuart CH 4-60 B (with hoses).

Product Images

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

TP series 200 range of single stage pumps with electrocoated cast iron or bronze bodies, stainless steel impellers and EPDM ‘O’-rings. (TPE models are only available with electrocoated cast iron bodies). The products can incorporate the following shaft seal variations: BQQE (silicon carbide-silicon carbide) & BQBE (Silicon carbide-carbon). The TPE pumps are available with or without a sensor. Maximum working pressure 16.0 bar (TP and TPE40-XXX/2 and TP and TPE40 XXX/2 models). All other models 10.0 bar. Maximum operating temperature: Bronze models are 85°C, cast iron models are cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210908

Size:

TP(E)(D) 32: DN32 Flange (inlet/outlet), TP(E)(D) 40: DN40 Flange (inlet/outlet), TP(E)(D) 50: DN50 Flange (inlet/outlet), TP(E)(D) 65: DN65 Flange (inlet/outlet), TP(E)(D) 80: DN80 Flange (inlet/outlet) & TP(E)(D) 100: DN100 Flange (inlet/outlet).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, Product/Version number, technical info and manufacturing country on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

TP series 200 pumps: TP (E)(D) 32/40/50/65/80/100. Example Code: TP E D 40 -270 /2 S -A -F -A -BQQE -H C B Where: TP = Pump range. E = Electronically speed-controlled pump. D = Twin-head pump (optional). 40 = Nominal diameter of inlet and outlet ports (DN), 2 or 3 digits, value range 32/40/50/65/80/100. -270 = Maximum head [dm], 2 to 4 digits, value range from 30 to 390. /2 = Pole number (TP/TPE 40 models), one digit, value range 2/4. S = Code for sensor version: [Blank]: with MGE motor and without sensor, S: with factory-fitted differential-pressure sensor. A = Code for pump version. Can either be A, X, A+E, X+E. A: Basic Version, X: Special version, (+E): With certificate or test reports, the second character of the code for pump version is an "E". F = Code for pipe connection: DIN flange. A = Code for materials. Can either be A or Z. A: Basic version. Z: Bronze pump housing and motor stool. BQQE = Code for shaft seal including other plastic and rubber pump parts, except the neck ring. Can be BQQE (silicon carbide-silicon carbide) or BQBE (Silicon carbide-carbon). -H = Code for rated motor power [kW] - will be a letter or a number, please consult installation and operating instructions. C = Code for phase and voltage or other information [V] - will be a letter, please consult installation and operating instructions. B = Code for speed variant [rpm] - will be a letter or number, please consult installation and operating instructions.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Manufacturer:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

CR(I)(N)(E) ranges of multistage centrifugal pumps incorporating stainless steel impellers, intermediate chamber and outer sleeve. CR(E) versions have cast iron bases and pump heads coated with black cathodic paint. CRI(E) and CRN(E) versions have stainless steel bases and pumpheads. The pumps are available with the following shaft seals HQQ*, HUU*, HUB*, HQB*, where * can be E for EPDM and V for FKM. Maximum working pressures: CR1, 3 or 5 (2-36 stages) Oval flange: 16.0 bar. CR1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange: 25.0 bar CRI/N1, 3 or 5 (2-36 stages) Flexi clamp with oval flange connection: 16.0 bar CR/I/N1, 3 or 5 (2-36 stages) DIN/ANSI/JIS flange, PJE, Flexi clamp or Triclamp: 25.0 bar CR10 (1-16 stages) Oval flange or DIN/ANSI/JIS flange: 16.0 bar. CR10 (17-22 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI10 (1-16 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI10 (17-22 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar CRN10 (1-22 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR15 or 20 (1-7 stages) Oval flange: 10.0 bar. CR15 or 20 (1-10 stages) DIN/ANSI/JIS flange: 16.0 bar. CR15 or 20 (11-17 stages) DIN/ANSI/JIS flange: 25.0 bar. CRI15 or 20 (1-7 stages) Flexi clamp with oval flange connection: 10.0 bar CRI15 or 20 (1-10 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 16.0 bar. CRI15 or 20 (11-17 stages) PJE, Flexi clamp, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CRN15 or 20 (1-17 stages) PJE, Flexi clamp, Flexi clamp with oval connection, Triclamp or DIN/ANSI/JIS flange: 25.0 bar. CR models: Cold water use only. CRI/CRN models: Cold water use only and from April 2023 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2210906

Size:

Oval flange: Rp 1” - 2”. Flexi Clamp Base: Small Base (CR/I/N1/1(s)/3/5) Ø32, Medium Base (CR/I/N15/20) Ø50. Triclamp Base Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50. Flange Base: Small Base (CR/I/N1/1(s)/3/5) DN25/32, Medium Base (CR/I/N15/20) DN40 and 50. PJE Base: Small Base (CR/I/N1/1(s)/3/5) DN32, Medium Base (CR/I/N15/20) DN50.

Marking:

Grundfos and Grundfos logo, type, Model, Product/Version no., technical info, temperature (WRAS 23C or WRAS 99C), manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/10/2027

Model:

CR(I)(N)(E) 1(s) range with 2-36 stages, CR(I)(N)(E) 3 range with 2-36 stages, CR(I)(N)(E) 5 range with 2-36 stages, CR(I)(N)(E) 10 range with 1-22 stages, CR(I)(N)(E) 15 range with 1-17 stages, CR(I)(N)(E) 20 range with 1-17 stages. Model keycode: CR(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRI(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE, CRN(E)(C) 1/1(s)/3/5/10/15/20-A B-C-D-E-XXXE. Where: CR = Pump type and Cast Iron, I = EN 1.4301, N = EN 1.4401, E = Preminum Electronically Controlled Motor, C = Core (Basic) with Electronically Controlled Motor. 1/3/5/10/15/20 = Flow rate [m³/h], (s) = Reduced impeller version. A = No. of stages. B = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange. C = Code for pipe connection: A = Oval flange, CA = Flexi clamp, CX = TriClamp, F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). D = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. E = Code for rubber parts: E = EPDM, V = Viton. XXX = Code for shaft seal: HQQ, HUU, HUB, HQB. [H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide]. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

CR(N)(E) ranges of vertical multistage centrifugal pumps with stainless steel (CRN models) or black polymer coated cast iron bodies (CR models) and a stainless steel impeller. The products are available with or without a sensor. Maximum working pressure: 16.0 bar - CR(N)(E) 32 range with 1-7 stages, CR(N)(E) 45 range with 1-5 stages, CR(N)(E) 64 range with 1-5 stages. 30.0 bar - CR(N)(E) 32 range with 8-14 stages, CR(N)(E) 45 range with 6-11 stages, CR(N)(E) 64 range with 6-8 stages. 33.0 bar - CR(N)(E) 45 range with 12-13 stages. Maximum operating temperature - CR models are cold water use only. CRN models are cold water use only up to February 2nd 2023, and 99°C from February 3rd 2023.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2301900

Size:

CR/CRN 32: CR/CRN 32, 1-14 stages: DN65 and DN80 flange connection. CRN32, 1-14 stages: 3” PJE connection CR/CRN 45: CR/CRN 45, 1-13 stages: DN80 and DN100 flange connection. CRN45, 1-13 stages: 4” PJE connection. CR/CRN 64: CR/CRN 64, 1-8 stages: DN100 flange connection. CRN64, 1-8 stages: 4” PJE connection.

Marking:

Grundfos and Grundfos logo, model, type, prod/version no., technical information and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

31/01/2028

Model:

CR/CRN(E) 32-A-B C-D-E-F-XXXX, CR/CRN(E) 45-A-B C-D-E-F-XXXX, CR/CRN(E) 64-A-B C-D-E-F-XXXX. Where: Type range: CR = Pump type and Cast Iron, N = EN 1.4401, E = Preminum Electronically Controlled Motor. 32, 45 or 64 = flow rate m³/h, A = number of impellers (CR/CRN 32 1-14, CR/CRN 45 1-13, CR/CRN 64 1-8). B = number of reduced impellers: 0, 1 or 2 on CR/CRN 32 1-7, CR/CRN 45 1-5, CR/CRN 64 1-8 models, 0 or 2 on all other models. C = Code for pump version: A = Basic version, B = Oversize motor, E = Pump with certificate, G = E-pump without operating panel, H = Horizontal version, I = Different pressure rating, J = E-pump with a different maximum speed, K = Pump with low NPSH, L = Pump including Grundfos CUE and certificate, N = With sensor, O = Clean and dryed, P = Undersize motor, R = Belt driven pump, V = Cascade function, X = Special version*, Z = Pump with bearing flange, D = Code for pipe connection: F = DIN flange, G = ANSI flange, J = JIS flange, N = Changed diameter of ports, P = PJE coupling (Victaulic). E = Code for materials: A = Basic version, C = Carbon-free pump, D = Carbon-graphite filled PTFE (bearings)/tungsten carbide, H = Flanges and base plate EN 1.4408, L = Motor stool, base plate and flanges EN 1.4408, N = Flanges EN 1.4408, R = Silicone carbide /silicone carbide bearing, S = PTFE neck rings, T = Baseplate EN 1.4408, X = Special*. F = Code for rubber parts: E = EPDM, V = Viton. XXXX = Code for shaft seal: HQQE or V / HUUE or V / HUBE or V /HQBE or V. H = Balanced cartridge seal with O-ring, B = Carbon, synthetic resin-impregnated, U = Cemented tungsten carbide, Q = Silicon carbide, E = EPDM, V = Viton. *Special version ONLY covers the situation where more than 4 options are selected within the same position. This will automatically turn the 4 or more options into an X.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

‘UPM4’ range of circulator pumps with either a composite (plastic) or stainless-steel body, plastic impellor and EPDM ‘O’-rings. The 1”-1½” models are supplied with EPDM gaskets for the inlet and outlet. The 2” model has fibre/NBR gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C ((CIL3) plastic body models), 99°C (S/Steel body models).

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2211908

Note:

R008 does not apply to the stainless steel body models. R415 does not apply if used on a closed circuit.

Size:

Composite (CIL3) model: 1” BSP (M) inlet/outlet, Stainless steel (N) models: 1” BSP (M) inlet/outlet, 1½” BSP (M) inlet/outlet, 2” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model type key on top of motor housing. Grundfos Holdings A/S, part no., serial no. and date of production (PC code = PC: YYWWxxx) on side of motor housing. Flow arrow on body.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2027

Model:

UPM4/UPM4L A BBB CC-DD E EEE F GGG Where: UPM4 - pump series type - standard, UPM4L - pump series type - large (motor) version with extended P1. UPM4XL (Added October 2024) - Extra-large version with extended performance. UPM4XXL (Added June 2025) - Extra-large version with extended performance. A = K - for condensing environments. BBB = Control variant - PWM or LIN bus. CC = Nominal diameter - 15 = G1”, 25 = G1½”, 32 = G2”. DD = Maximum head, value divided by 10 = head in m, e.g. 20 = 2.0m. Can be 20, 30, 40, 45, 50, 55, 60, 65, 70, 75, 90 or 100. (90 variant added October 2024. 100 variant added June 2025). E EEE = Pump housing and port length. N 130 and N 180 = Stainless steel and 130 or 180mm port length. CIL3PP = Composite (plastic), which is only available as 130mm port length, so no value Is mentioned. F = Control box orientation. Can be 3, 6, 9, or 12. GGG = Customer code. Can be any combination or letters and numbers.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110136

Size:

FGV3 model - F (round flange) versions: DN25. FGV6-FGV20 models - F (round flange) versions: DN32-50. FGV3-FGV20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Fourgroup, model number, and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

FGV 3 FGV 6 FGV 10 FGV 15 FGV 20 Code example FGV X/Y A B C D E Where: FGV = Standard Pump model X = Rated flow [m³/h] (varies: 1-20). Y = No. of stages. A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency

Approval Holder:

FOURGROUP

Company Name

FOURGROUP

Address

via E. Fermi 8, 35020 Polverara (PD)

Country

Italy

View All Listings by this Company

Range of shower handsets (chrome plated brass bodies). The shower handset incorporates an approved check valve cartridge with a flow regulator, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210354

Note:

Open outlet use only.

Size:

1/2” BSP (M)

Marking:

THG on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

66/W Style U9A - West Coast croisillon metal , U9B - West Coast manette metal , U9C - West Coast croisillon guilloché lin , U9D - West Coast manette guillochée lin , U9E - West Coast croisillon onyx noir , U9F - West Coast manette onyx noir , U9G - West Coast croisillon marbre blanc , U9H - West Coast manette marbre blanc , U9I - West Coast manette insert à définir, U9J - West Coast croisillon insert à définir, U9K - Grand Central croisillon metal , U9L - Grand Central manette metal , U9M - Grand Central croisillon onyx noir , U9N - Grand Central manette onyx noir , U9P Grand Central manette insert à définir, U9Q Grand Central croisillon insert à définir, U9R - Grand Central croisillon marbre blanc , U9S - Grand Central manette marbre blanc, U3J – Estrela, U3K – Estrela à manettes, U3L – Estrela insert metal. Finishes A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H63 – Dark Nickel H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD Example: U9A(style)66/W(model)A02(Finishes)

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes - see model). The E082051.XXXAWZZ and E082073.XXXAWZZ models incorporate a combined TPE washer and stainless steel strainer on the inlet. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210358

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Almar Logo on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

E082027.XXXAWZZ Emotion Ø100 hand shower single jet, E082043.XXXAWZZ Emotion Ø130 hand shower single jet, E082051.XXXAWZZ Emotion Ø100 hand shower multi jet, E082073.XXXAWZZ Emotion Ø130 hand shower multi jet. XXX can be replaced by the following to denote finish: 002 - Chrome, 011 - Chrome/Black, 116 - Chrome/White, 136 - Black painted, 141 - White painted, 245 - PVD Gold, 246 - PVD Stainless Steel, 277 - Nickel brushed, 284 - PVD Copper brushed, 285 - PVD High Brass Brushed, 286 - PVD Gune Metal Brushed. ZZ is replaced with alphanumeric characters to denote packing information.

Product Images

Approval Holder:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Manufacturer:

ALMAR s.r.l

Company Name

ALMAR s.r.l

Address

Viale dello Sport, 17 bis Gavirate (VA)

Postcode

21026

Country

Italy

General Email

info@almarmadeinitaly.it

View All Listings by this Company

Range of shower columns with an integral brass body and an aluminium painted column with chrome plated upper. Flow is controlled by a solenoid valve activated by an infrared sensor. The shower head inlet incorporates a combined NBR washer and stainless steel filter. The shower outlet incorporates a plastic flow regulator. The product is supplied with an inline ½” BSP (M) x ¾” BSP (F) screwdriver operated spherical valve with chromium plated brass bodies and ball for installation on the inlet. The product drains down after each use via an integral LLDPE tube leading to a drain outlet at the base of the column. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2204349

Size:

½” BSP (M) (to spherical valve).

Marking:

Presto on front panel.

Installation Requirements:

R001 R040 R260

Expiry date:

30/04/2027

Model:

27477 - DL400 SE LYNX 30” 8L/MN pile RA droit complet (battery). 27479 - DL400 SE LYNX 30” 8L/mn SECT220/7V RA DROIT CPLT (mains).

Approval Holder:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

General Email

l.granseigne@presto.fr

View All Listings by this Company

Manufacturer:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

General Email

l.granseigne@presto.fr

View All Listings by this Company

Range of overhead shower outlets with plastic bodies (various finishes), EPDM O-rings and a stainless-steel strainer. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212081

Size:

For use with 01 800 180 basic set

Marking:

Hansgrohe on shower face.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

26 468 xxx Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm 26 468 400 Hansgrohe Raindance Select E Overhead shower 300 3jet with shower arm Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company