Directory Search Results

Print List

#241102047

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve that is activated via an infrared sensor. Certain models incorporate a mixer spout which incorporates a manual temperature control. The spout outlets also incorporate a plastic flow straighter. Maximum working pressure; 5 Bar Maximum operating temperature: 60°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241102047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
R010 only applies to models with one inlet
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP F captive nut end connections.
Marking:
Delabie on body.
Installation Requirements:
R001 R007 R010 R040
Expiry date:
30/11/2029
Model:
379MCHB 379ENCB 379DERB 379MCH15 379DER15 379D1315 379112 Model added December 2024: 379ENC15
Product Images

Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France

View All Listings by this Company

Print This Approval


#241104031

Range of electronic combination tap assemblies, incorporating a solenoid valve controlling the flow that is activated via an infra-red sensor. The Xeris models (012930699 & 012940699) incorporate a check valve cartridge in the inlet hose, however the complete assembly has not been tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
241104031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assembly with a 3/8” BSP (F) end connections
Marking:
Schell on body
Installation Requirements:
R001 R006 R009
Expiry date:
30/11/2029
Model:
012000699 – Puris 012120699 – Puris 012300699 - Celis 012310699- Celis 021680699 – Modus Trend 021690699 – Modus Trend 021720699 – Modus E 021720613 – Modus E 021730699 – Modus E 021730613 – Modus E 012930699 - Xeris 012940699 – Xeris The difference between the article 02172 series and 02173 series is the power supply: 02172 series is with battery pack and 02173 series is with power adapter.
Product Images

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#241204717

Side and bottom entry BS1212 - 3 compact type float operated valve for WC flushing cisterns Maximum operating pressure 14 bar. Maximum operating temperature 23°C

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
241204717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
No float supplied and not considered part to this approval.
Size:
½” BSP male
Marking:
BS1212 PT3 & MacDee on body.
Installation Requirements:
R001 R008 R550 R554 R560
Expiry date:
31/12/2029
Model:
Side entry: DVS1082 silenta DVS1092 silenta DVF5300 silenta CF1004XX silenta Cranked Pedestal: DVS3182 silenta DVS3872 silenta DVS3882 silenta DVS3972 silenta DVS3982 silenta Bottom entry: DVF5200 silenta CF1702XX silenta CF1005XX silenta
Product Images

Approval Holder:
Wirquin Ltd
Company Name
Wirquin Ltd
Address
Unit 3 Alpha Court Thorne Doncaster
Postcode
DN8 5TZ
Country
United Kingdom
Phone
01302 312252
General Email
mick.kirby@wirquin.co.uk

View All Listings by this Company

Print This Approval


#241204709

Range of spring loaded, resilient trim check valve cartridges with plastic body. For insertion into fittings with specifically sized bores. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
241204709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN15, DN20 & DN25.
Marking:
W (Watts logo – Socla is a unit of the Watts Group), DN & flow arrow on body. Models WM020 & WM025 also have Ocean on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
Type TK range: Model WM015 (Ref W149015600 or 149B043318): DN15. Model WM020 (Ref W140020600 or 149F043509): DN20. Model WM025 (Ref W140025600 or 149F043510): DN25.
Product Images

Approval Holder:
Socla SAS
Company Name
Socla SAS
Address
365, Rue du Lt Putier, 71530 Virey Le Grand, France
Phone
+33 3 85 97 42 42

View All Listings by this Company

Print This Approval


#250102709

Spring loaded, resilient trim, in-line check valve cartridge with NBR & EPDM ‘O’-rings, plastic guide, stem and body. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 8.6 Bar. Maximum operating temperature 60°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
250102709
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
12.8mm OD
Marking:
SOLEX on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
T10193
Product Images

Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China

View All Listings by this Company

Print This Approval


#2304107

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304107
Size:
Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.
Marking:
Caple and product info on adhesive label on body. Caple on cover plate
Installation Requirements:
R001 R009 R170 R040
Expiry date:
30/04/2028
Model:
BOILER2

Approval Holder:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval


#250104712

Range of stainless steel calorifiers. Max working pressure 10 bar. Max operating temperature 90°C.

Section:
0090 Calorifiers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1 ½” BSP (F) x 2” BSP (F)
Marking:
Versol (manufacturer) website address, manufacturer address serial no. Year of manufacture (YYYY) Material, capacity, pressure max, temp max and other tech info on data plate
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
VERSOTHERM STI-500 Storage Calorifiers-500L VERSOTHERM STI-750 Storage Calorifiers-750L VERSOTHERM STI-1000 Storage Calorifiers-1000L VERSOTHERM STI-1500 Storage Calorifiers-1500L VERSOTHERM STI-2000 Storage Calorifiers-2000L
Product Images

Manufacturer:
Versol Ltd Sp Zoo,
Company Name
Versol Ltd Sp Zoo,
Address
Robotnicza 38, 39-100 Ropczyce

View All Listings by this Company

Print This Approval


#241215004

Range of flow regulators, aerators and flow straighteners with plastic bodies. Maximum operating temperature 60°C.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
241215004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
See model.
Marking:
B14-7L, B13.8-8L, B16-9L, C19-9L, C19-7L& C19-5L models: FS on body. All other models: Feng Shun on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
Flow regulators: A18-9L: Ø 18.06mm, B14-7L: Ø 14.42mm, B13.8-8L: Ø 14.12mm, B16-9L: Ø 16.05mm, C19-9L: Ø 18.86mm, C19-7L: Ø 18.72mm, C19-5L: Ø 18.77mm. Aerators: J06-5L: Ø 15.11mm, J28: Ø 25.28mm, J01-7L: Ø 20.84mm. Flow straightener: J08-1: Ø 20.65mm.
Product Images

Approval Holder:
Ningbo Fenghua Xinfengshun Sanitary Ware Co., Ltd
Company Name
Ningbo Fenghua Xinfengshun Sanitary Ware Co., Ltd
Address
No.39 Ruifeng Road, Fenghua, Ningbo City, Zhejiang 315500
Country
China

View All Listings by this Company
Manufacturer:
Ningbo Fenghua Xinfengshun Sanitary Ware Co., Ltd
Company Name
Ningbo Fenghua Xinfengshun Sanitary Ware Co., Ltd
Address
No.39 Ruifeng Road, Fenghua, Ningbo City, Zhejiang 315500
Country
China

View All Listings by this Company

Print This Approval


#250204004

Range of balancing valves with DZR brass bodies Maximum operating pressure 25 bar. Maximum operating temperature 99°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250204004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” – 2” BSP (F)
Marking:
PN, CR, flow arrow, size and date of manufacture (YYWW) on body. Albion logo on operating member.
Installation Requirements:
R001
Expiry date:
28/02/2030
Model:
ART22 ART23 ART28

Approval Holder:
Albion Valves (UK) Limited
Company Name
Albion Valves (UK) Limited
Address
9a Fallbank Industrial Estate Dodworth Barnsley
Postcode
S75 3LS
Country
United Kingdom
Phone
01226 729900
General Email
samjed@albionvalvesuk.com

View All Listings by this Company

Print This Approval


#250112002

Ceramic cartridge headwork with a plastic body, for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
250112002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Ø 45mm
Marking:
Bristan on body.
Installation Requirements:
R001
Expiry date:
31/01/2030
Model:
08GC45FBE00.04

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 359 of 407

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.