Range of commercial dish washing machines. Flow is controlled by a solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure: 4.0 Bar. Maximum operating temperature: 60°C.

Section:

2390 Washing Machines

Section Subtitle:

Dish. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

250402712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PVC bodied appliance hose with an EPDM inner liner incorporating a ¾” BSP (F) captive nut end connection.

Marking:

DC Products logo on control panel. DC Products logo, model name and other technical information on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

ED50A, ED900A, SD40A, SXD40A, SD45A, SD50A, SXD45A, SXD50A, PG/PD40A, PG/PD45A, PG/PD50A, OG/OD40A, OG/OD50A, X600A, X700A, W700A, W1100, W1400A, W1400SA, SD900A, SD1000A, SD1300A, SD1350A, PD1000A, PD1300A, PD1350A, OD1400A, OD1425A, OD1450A, DC57-42A, DC57-62A, DC67A, DC109A. Key: SD = Standard series dish, SXD = Standard extra dish, ED = ECONOMY SERIES DISH, PG/PD = Premium series glass/Premium range dish, OG/OD = Optima series glass/dish W or X = washrite range. DC = Direct Catering Range (the numbers for the DC range also represent basket size). The number 40, 45 and 50 numbers relate to the basket size. The numbers 600, 700, 900, 1000, 1100, 1350, 1400 are arbitrary number or once related to the pump sizes. Any model that has the letter ‘A’ immediately after the model number signifies that the break tank has been fitted. Additional suffixes of varying character may be present after the letter ‘A’, e.g. ‘PD50A D’ List of available suffixes: BPI – boost pump CP – chemical pumps D – Drain pump DL – lock DP – detergent pump DR – Dryer HR – recovery IS – Softener LT – Light RDP – rinse and detergent pumps RP – rinse pump SW – Saniwash TD – thermos Disinfection UV – UV light. All the above models have the same pathway.

Approval Holder:

DC Products Ltd

Company Name

DC Products Ltd

Address

Unit 25 lodge hill Industrial Park Westbury Sub Mendip Somerset

Postcode

BA5 1EY

View All Listings by this Company