Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Please refer to model for maximum operating pressure. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Stuart Turner and product info label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: 47342 Showermate S1.5 bar Twin. 47343 Showermate S2.0 bar Twin. 44925 Showermate S2.0 bar Twin. 44923 Showermate S2.0 bar Single. 44924 Showermate S1.5 bar Twin. 47340 Showermate S2.0 bar Single. Maximum working pressure 4.0 bar: 47341 Showermate S2.6 bar Single. 44920 Showermate S2.6 bar Twin. 44919 Showermate S2.6 bar Single. 47344 Showermate S2.6 bar Twin.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250504706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.

Marking:

Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2030

Proviso:

Open outlet use only.

Model:

140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Manufacturer:

Panelli S.r.l.

Company Name

Panelli S.r.l.

Address

Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Range of overhead shower and shower handsets with (brass or plastic bodies – various finishes), incorporating a stainless-steel strainer on the inlets. Open outlet use only Maximum operating temperature – 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241188019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Shower handsets - ½” BSP (M) Overhead showers – ½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

704418 110MM 3 FUNCTION HANDSET AL089 - DARK GREY PLATE 704307 110MM 3 FUNCTION HANDSET AL059 706901 110MM 3 FUNCTION HANDSET MATT BLACK AL242 707540 99MM SHOWER HANDSET CHROME AL255 ROUND ACY1004 100MM FIXED HEAD ROUND CHROME ACY1007 300MM FIXED HEAD ROUND CHROME 704336 200MM FIXED HEAD (CP) AL065 SQUARE 704323 200MM FIXED HEAD (CP) AL070 ROUND 704426 192MM FIXED HEAD (CP) AL088 DARK GREY PLATE 704477 200MM FIXED HEAD (CP) AL087 SQUARE 707543 200MM FIXED HEAD CHROME AL259 ROUND 706906 200MM ROUND FIXED HEAD MATT BLACK AL243 Added Jan 2026: 707344 200MM FIXED HEAD AL191 - SQUARE MB 707335 192MM FIXED HEAD MATT BLACK AL180

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250404023

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.

Marking:

Hansgrohe on face plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall mounted brass shower outlets in various finishes. Open outlet use only. Maximum operating temperature: 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251002001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4" BSP (M).

Marking:

Vola on base plate

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

VOLA 080ST-XX, VOLA 080ST+100-XX, VOLA 080ST+200-XX, VOLA 080ST-100-XX. Model VOLA 080ST-XX, VOLA 080ST-100-XX, VOLA 080ST+100-XX and VOLA 080ST+200-XX made in Brass or stainless steel material are available with the different surface finish. Suffix “XX” indicate the number of surface finish and denotes For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed copper, B69=Brushed Silver, B70=Brushed Gold. For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).

Marking:

Aqualisa on the handset body or overhead shower swivel joint.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet use only.

Model:

Chrome Shower handset: ACY1012 Chrome Overhead showers: 704120 704121 704119

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of pressure sensors with stainless steel bodies. Models consist of a sensor and male threaded end. Maximum working pressure: See Models. Maximum operating temperature 90°C.

Section:

1720 Switches

Section Subtitle:

Pressure operated.

WRAS Approval Number:

250402038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¼” BSP (M)

Marking:

Customer Production Number, Sensata Production Number, Production Date, Location Code, Sensata Mark and pressure range laser etched on cover.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

35CP11-15165006YS00H2EC & 35CP11-38165006YS00H2EC: 6 bar, 35CP11-16165109YS00H2EC: 9 bar, 35CP11-11165010YS00H2EC & 35CP11-36165010YS00H2EC:10 bar, 35CP11-12165016YS00H2EC & 35CP11-37165016YS00H2EC: 16 bar, 35CP11-18165025YS00H2EC & 35CP11-39165025YS00H2EC: 25 bar, 35CP11-19165040YS00H2EC & 35CP11-40165040YS00H2EC: 40 bar.

Approval Holder:

Sensata Technologies Holland B.V.

Company Name

Sensata Technologies Holland B.V.

Address

Jan Tinbergenstraat 80, 7559 SP Hengelo (O), The Netherlands

View All Listings by this Company

Manufacturer:

Sensata Technologies ( China) Co., Ltd

Company Name

Sensata Technologies ( China) Co., Ltd

Address

18# Chuang Xin Xinbei District Changzhou

Country

Jiangsu

View All Listings by this Company

Range of pillar taps with brass bodies (chromium plated) incorporating either a quarter turn ceramic disc headworks with single lever operating members (TAP9013 model) or non-rising spindle headwork with dome type operating members (TAP1118 model). The spout outlets incorporate a plastic flow straingtener. The products are supplied with metal backnuts. Maximum working pressure 5.5 bar. Maximum operating temperature 70°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

250415007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

NSS and production date (DmYY) on body. (Where the day ‘D’ is represented by alphanumeric characters, 1-10, then A to H = 11 to 18, J to N = 19 to 23, P to T = 24 to 28, V to W = 29 to 30 and X = 31, month ‘m’ is denoted by a letter, a = January, b = February, c = March, d = April, e = May, f = June, g = July, h = August, j = September, k = October, m = November, n = December, and year ‘YY’ is numeric, e.g. 8a25 = 8th January 2025).

Installation Requirements:

R001 R006

Expiry date:

30/04/2030

Model:

TAP1118, TAP9013.

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Manufacturer:

Ningbo Swan Sanitary Co., Ltd.

Company Name

Ningbo Swan Sanitary Co., Ltd.

Address

Taoyuan Village, Hengjie Town, Haishu District, Ningbo City

Country

China

General Email

View All Listings by this Company

Range of stainless-steel braided flexible hose assemblies incorporating EPDM inner and plastic (BFSFH12-EE80/150) or brass (BFSFH19-EE60) captive nut end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

241002101

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP X 3/4” BSP ELBOW.

Marking:

MIDBRASS®, WRAS and Year of manufacture (YYYY).

Installation Requirements:

R001 R008

Expiry date:

31/10/2029

Model:

BFSFH12-EE80, BFSFH19-EE60 & BFSFH12-EE150.

Approval Holder:

Monarch Water Ltd

Company Name

Monarch Water Ltd

Address

Fair Green Diss Norfolk

Postcode

IP22 4DG

Country

United Kingdom

Phone

01986 784759

General Email

kdelaney@monarchwater.co.uk

View All Listings by this Company

Manufacturer:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Manufacturer:

Navigator MSL Ltd.

Company Name

Navigator MSL Ltd.

Address

Mill Road, Sharnbrook, Beds.

Postcode

MK44 1NP

Phone

01234 781234

General Email

sales@navigatormsl.com

View All Listings by this Company

Range of stainless steel or nylon braided, PEX lined flexible hose assemblies with various brass end connections. Maximum working pressure 10.0 Bar. Maximum operating temperature 85 °C.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250412002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Justlink, WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001 R008

Expiry date:

30/04/2030

Model:

JL – A*B – XX – D – 2 – XXX Where model = JL – Connection A * Connection B – DN – Outer braided material – Inner tube material – Length JL = abbreviation of manufacturer’s company name Jianglin. A*B = Connection A and Connection B. XX = DN (Dimension from 06 to 10): DN6 = 06, DN8 = 08, DN10 = 10. D = Outer braided material, SS = stainless steel wire, SN = stainless steel wire plus black nylon wire, N = Nylon Braided. Inner tube material, 2 = PEX XXX = Length (15cm to 200cm) 015 = 15cm … 200 = 200cm For example: JL-09*11-08-SS-2-045 would be for F1/2 x F1/2 elbow, DN8, stainless steel braided, PEX inner tube, 45cm long. DN6 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN8 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 19= M8*(12‐110) with single O‐ring 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 26= F15 29= 10mm compression fitting 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 45= M8*(12‐110) with double O-ring 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring DN10 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/4 20= M10*(12‐110) with single O‐ring 21= M11*(12‐110) with single O‐ring 22= M12*(12‐110) with single O‐ring 24= M15*(12‐110) with single O‐ring 30= 12mm compression fitting 31= 15mm compression fitting 33= 15mm isolation valve 35= 10mm pushfit 36= 12mm pushfit 37= 15mm pushfit 39= 10mm pushfit isolation valve 40= 12mm pushfit isolation valve 41= 15mm pushfit isolation valve 46= M10*(12‐110) with double O-ring 47= M11*(12‐110) with double O-ring 48= M12*(12‐110) with double O-ring 50= M15*(12‐110) with double O-ring

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of PVC outer layer shower hoses with a PVC internal layer and EPDM washers. Open outlet use only. Maximum operating temperature:60C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

250488007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) Captive nut.

Marking:

Aqualisa on ferrule

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

707019 1.5m Smooth Hose Matt Black AL241 Shower Hose

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of 2, 3, 4, 5 or 6 port manifold assemblies with brass bodies. The products incorporate a spherical valve with a plastic ball on either the inlet or on each outlet (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

250304703

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Fastec® F13 internal Ø 20.75 - 20.93mm

Marking:

Teco logo, DN, PN, year and batch/month (YYMM) and F13 on body.

Installation Requirements:

R001

Expiry date:

31/03/2030

Model:

Manifold with valve on each outlet: DN2309727: DN10 Manifold 2 ways F13F, DN2105548: DN10 Manifold 3 ways F13F, DN1901798: DN10 Manifold 4 ways F13F, DN1901797: DN10 Manifold 5 ways F13F, DN2309733: DN10 Manifold 6 ways F13F, Manifold with valve on inlet: DN2410745: DN15 Manifold 4 ways F13F, DN1901854: DN15 Manifold 5 ways F13F.

Manufacturer:

TECO Srl

Company Name

TECO Srl

Address

Via Sandro Pertini n.39/41 25050 Provaglio d'Iseo (BS)

Country

Italy

View All Listings by this Company

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating ceramic disc headwork which controls the flow to 2 outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

240988030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Not supplied with shower hose, shower handset or overhead shower outlet.

Size:

½”x ¾” BSP (M) offset unions or 15mm compression

Marking:

Aqualisa on body

Installation Requirements:

R001 R010 R040

Expiry date:

30/09/2029

Model:

707737 Eco valve assy (incl flow restrictor) 704318 Dual outlet bar valve complete AL081 – Round 704329 - Dual outlet bar valve complete AL080 – Square 707345 - Dual Outlet bar valve complete AL192 - Square 704328 + 704318 Shower column (CP) AL074 – Round + Dual outlet bar valve complete AL081 – Round Models added Jan 2026: 706903+706910 DUAL OUTLET BAR VALVE COMPLETE MATT BLACK AL185 – ROUND + SHOWER COLUMN MATT BLACK AL184 - ROUND 704329+704335 Dual outlet bar valve complete AL080 – Square+ SHOWER COLUMN (CP) AL063 - SQUARE 707345+707342 Dual Outlet bar valve complete AL192 – Square + SHOWER COLUMN AL190 - SQUARE MB

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of concealed thermostatic blending valves (brass bodies – various finishes) with ceramic diverter controlling the flow which also diverts to 2 outlets and a thermostatic cartridge controlling the temperature independently. The inlets incorporate an approved check valve cartridge which has not been fully tested to demonstrate it provides backflow protection. Shower hose and handset not supplied. Maximum working pressure 10.0 Bar Maximum operating temperature 70 °C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250512005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F) Inlet & outlet

Marking:

TAIZHOU EVERGREAT PLUMBING & SANITARYWARE CO.,LTD on cover plate.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

EG1909004 EG1909004BB EG1909004BRN EG1909004MB

Approval Holder:

Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd

Company Name

Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd

Address

Xiaqiu Industrial Area Qinggang Town Yuhuan

Country

China

General Email

sales@tzevergreat.com

View All Listings by this Company

Manufacturer:

Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd

Company Name

Taizhou Evergreat Plumbing & Sanitary Ware Co., Ltd

Address

Xiaqiu Industrial Area Qinggang Town Yuhuan

Country

China

General Email

sales@tzevergreat.com

View All Listings by this Company

Range of wall mounted thermostatic shower valves (chromium plated brass bodies), incorporating ceramic disc headwork controlling the flow and a thermostatic cartridge independently controlling the temperature, both using single lever operating members. Both inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Products are supplied with a chromium plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250503005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression

Marking:

ESTEEM on operating member.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

E80019, E80020.

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Model added February 2026: RP3 SAI SHCDIV C

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Shower valve(s) with thermostatic temperature control

Wall mounted Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection)

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/06/2030

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of wall mounted self-closing thermostatic shower valves with brass bodies, with a chrome plated dome type operating member. Models are also supplied with a chrome plated shower head with a plastic aerator. Both inlets incorporate stainless steel strainers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250602015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models:

Marking:

790BOX - Delabie on case cover 790218 – Delabie on button and shower head 790219 – Delabie on button and shower head

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

790BOX – ½” BSP (M) X 3/4" BSP (F) 790218 – ¾” BSP (M) 790219 – ¾” BSP (M)

Manufacturer:

Delabie SAS

Company Name

Delabie SAS

Address

1-3 Henderson house Hithercroft Road Wallingford Oxfordshire

Postcode

OX10 9DG

Country

United Kingdom

View All Listings by this Company

Ranges of solenoid valves with plastic bodies, incorporating EPDM ‘O’-rings and diaphragms. The products incorporate a plastic flow regulator and a plastic filter on the inlet. The VAI-FC model can also be supplied with a brass filter. The products incorporate a plastic flow regulator on the outlet, (except for the VAI-FC model). Maximum working pressure 10.0 bar Maximum operating temperature 85°C.

Section:

2240 Valves

Section Subtitle:

Solenoid, plastic.

WRAS Approval Number:

250502702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Vxy-FC: ½” or ¾” BSP (M) inlet x 10mm or 13mm spigot 90° or 180° outlet, VS01-FC: ⅜” BSP (M) inlet x 10mm spigot outlet, VS02-FC: ½” BSP (M) inlet x 10mm spigot outlet, V18Qc-FC: ¾” BSP (M) inlet x Ø ¼" (or 6mm) or ⅜" or 5/16" (or 8mm) push-fit connector outlet, VAI-FC: ⅜” or ½” or ¾” BSP (M) inlet in-line and outlet, SAD-E-FC: ¾” BSP (M) inlet x 10mm spigot 90° outlet, ASD-FC: ¾” BSP (M) inlet x 10mm spigot 90°outlet.

Marking:

Robertshaw logo on metal frame. Technical information on adhesive label.

Installation Requirements:

R001 R008

Expiry date:

31/05/2030

Model:

Vxy-FC series: V18-FC, V19-FC, V28-FC, V29-FC, V38-FC, V39-FC, V48-FC, V58-FC. Where: 1 to 5 = number of outlets. 8 or 9 = outlet orientation compared to inlet where 8: 180° (in line), 9: 90° (angled). VS01-FC, VS02-FC, V18Qc-FC, VAI-FC, SAD-E-FC, ASD-FC.

Approval Holder:

ROBERTSHAW ITALY S.r.L.

Company Name

ROBERTSHAW ITALY S.r.L.

Address

Via Baccanello 1/B, 24030 Terno d’Isola (Bg)

Country

Italy

View All Listings by this Company