The 3G Metric Imperial range of plastic compression fittings with polypropylene bodies, compression nut and silicone seal for use with PE80 pipe (manufactured to BS EN 12201). Maximum working pressure: Fittings when used with PE100 pipe = 16.0 bar. Fittings when used with PE80 pipe = 12.0 bar. For above and below ground and cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206349

Size:

see model

Marking:

Philmac and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

3G Metric Imperial Range: Wall Plate Elbow models: 98902200 20mm(½”) x ½” 98903100 25mm(¾”) x ½” 98903200 25mm(¾”) x ¾” End Cap models: 98902900 20(½") 98903900 25(¾") 98904900 32(1") 98905900 40(1¼") 98906900 50(1½") 98907900 63(2") Elbow models: 98902800 45˚ 20(½") 98903800 45˚ 25(¾") 98904800 45˚ 32(1") 98905800 45˚ 40(1¼") 98906800 45˚ 50(1½") 98907800 45˚ 63(2") 98952200 20(½") x 20(½") 98953300 25(¾") x 25(¾") 98954400 32(1") x 32(1") 98955500 40(1¼") x 40(1¼") 98956600 50(1½") x 50(1½") 98957700 63(2") x 63(2") 98962100 20(½") x ½" FI BSP 98962200 20(½") x ¾" FI BSP 98963100 25(¾") x ½" FI BSP 98963200 25(¾") x ¾" FI BSP 98963300 25(¾") x 1" FI BSP 98964300 32(1") x 1" FI BSP 98964400 32(1") x 1¼" FI BSP 98965400 40(1¼") x 1¼" FI BSP 98965500 40(1¼") x 1½" FI BSP 98966500 50(1½") x 1½" FI BSP 98966600 50(1½") x 2" FI BSP 98967600 63(2") x 2" FI BSP 98973200 25(¾") x ¾" MI BSP 98974300 32(1") x 1" MI BSP Joiner/Coupler models: 98912200 20(½") x 20(½") 98913300 25(¾") x 25(¾") 98914400 32(1") x 32(1") 98915500 40(1¼") x 40(1¼") 98916600 50(1½") x 50(1½") 98917700 63(2") x 63(2") Reducing Joiner/Coupler models: 98913200 25(¾") x 20(½") 98914200 32(1") x 20(½") 98914300 32(1") x 25(¾") 98915300 40(1¼") x 25(¾") 98915400 40(1¼") x 32(1") 98916300 50(1½") x 25(¾") 98916400 50(1½") x 32(1") 98916500 50(1½") x 40(1¼") 98917400 63(2") x 32(1") 98917500 63(2") x 40(1¼") 98917600 63(2") x 50(1½") End Connector models: 98922100 20(½") x ½" MI BSP 98922200 20(½") x ¾" MI BSP 98922300 20(½") x 1" MI BSP 98923100 25(¾") x ½" MI BSP 98923200 25(¾") x ¾" MI BSP 98923300 25(¾") x 1" MI BSP 98924200 32(1") x ¾" MI BSP 98924300 32(1") x 1" MI BSP 98924400 32(1") x 1¼" MI BSP 98924500 32(1") x 1½" MI BSP 98925300 40(1¼") x 1" MI BSP 98925400 40(1¼") x 1¼" MI BSP 98925500 40(1¼") x 1½" MI BSP 98925600 40(1¼") x 2" MI BSP 98926500 50(1½") x 1½" MI BSP 98926600 50(1½") x 2" MI BSP 98927500 63(2") x 1½" MI BSP 98927600 63(2") x 2" MI BSP 98982100 20(½") x ½" FI BSP 98982200 20(½") x ¾" FI BSP 98982300 20(½") x 1" FI BSP 98983100 25(¾") x ½" FI BSP 98983200 25(¾") x ¾" FI BSP 98983300 25(¾") x 1" FI BSP 98984200 32(1") x ¾" FI BSP 98984300 32(1") x 1" FI BSP 98984400 32(1") x 1¼" FI BSP 98985400 40(1¼") x 1¼" FI BSP 98985500 40(1¼") x 1½" FI BSP 98986500 50(1½") x 1½" FI BSP 98986600 50(1½") x 2" FI BSP 98987500 63(2") x 1½" FI BSP 98987600 63(2") x 2" FI BSP Tee models: 98932200 20(½") x 20(½") x 20(½") 98933300 25(¾") x 25(¾") x 25(¾") 98934400 32(1") x 32(1") x 32(1") 98935500 40(1¼") x 40(1¼") x 40(1¼") 98936600 50(1½") x 50(1½") x 50(1½") 98937700 63(2") x 63(2") x 63(2") 98942100 20(½") x 20(½") x ½" FI BSP 98942200 20(½") x 20(½") x ¾" FI BSP 98943100 25(¾") x 25(¾") x ½" FI BSP 98943200 25(¾") x 25(¾") x ¾" FI BSP 98943300 25(¾") x 25(¾") x 1" FI BSP 98944100 32(1") x 32(1") x ½" FI BSP 98944200 32(1") x 32(1") x ¾" FI BSP 98944300 32(1") x 32(1") x 1" FI BSP 98944400 32(1") x 32(1") x 1½" FI BSP 98945100 40(1¼") x 40(1¼") x ½" FI BSP 98945200 40(1¼") x 40(1¼") x ¾" FI BSP 98945400 40(1¼") x 40(1¼") x 1¼" FI BSP 98945500 40(1¼") x 40(1¼") x 1½" FI BSP 98946100 50(1½") x 50(1½") x ½" FI BSP 98946200 50(1½") x 50(1½") x ¾" FI BSP 98946500 50(1½") x 50(1½") x 1½" FI BSP 98946600 50(1½") x 50(1½") x 2" FI BSP 98947600 63(2") x 63(2") x 2" FI BSP 98993100 25(¾") x 25(¾") x ½" MI BSP 98993200 25(¾") x 25(¾") x ¾" MI BSP Reducing Tee models: 98933200 25(¾") x 25(¾") x 20(½") 98933400 25(¾") x 25(¾") x 32(1") 98934300 32(1") x 32(1") x 25(¾") 98935300 40(1¼") x 40(1¼") x 25(¾") 98935400 40(1¼") x 40(1¼") x 32(1") 98936300 50(1½") x 50(1½") x 25(¾") 98936400 50(1½") x 50(1½") x 32(1") 98936500 50(1½") x 50(1½") x 40(1¼") 98937300 63(2") x 63(2") x 25(¾") 98937400 63(2") x 63(2") x 32(1") 98937600 63(2") x 63(2") x 50(1½") Reducing Elbow models: 98952300 25(¾") x20(½")

Approval Holder:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

Manufacturer:

Philmac Pty Ltd

Company Name

Philmac Pty Ltd

Address

Diplocks Way, Hailsham, East Sussex

Postcode

BN27 3JF

Phone

+44 (0) 1323 847 323 Fax: 01323 844775

General Email

philmacorders@philmac.co.uk

View All Listings by this Company

>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201312

Size:

Please refer to model.

Marking:

Conex logo (B) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

ZK International Group

Company Name

ZK International Group

Address

NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang

Country

China

General Email

View All Listings by this Company

‘Tectite Sprint’ range of pushfit fittings with copper or DZR brass bodies. 10mm, 15mm, 22mm & 28mm pushfit fittings are for use with copper pipe (manufactured to BS EN 1057) and polybutylene barrier pipe and cross linked PEX barrier pipe (manufactured to BS 7291). 35mm, 42mm & 54mm pushfit fittings are for use with copper pipe (manufactured to BS EN 1057) only. When used with PB & PEX pipes operating parameter are: 12.0 bar@cold water. 3.0 bar@92°C. When used with copper pipes operating parameter are: 20.0 bar@cold water. 10.0 bar@100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201049

Size:

See model

Marking:

YF logo (abbreviation of Yorkshire Fittings, a brand of Aalberts Integrated Piping Systems Ltd) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

‘Tectite Sprint’ range: Copper Models: 75500 TT1/TT270 10mm Coupling, 75660 TT1/TT270 12mm Coupling, 75661 TT1/TT270 14mm Coupling, 75501 TT1/TT270 15mm Coupling, 75662 TT1/TT270 16mm Coupling, 75663 TT1/TT270 18mm Coupling, 75502 TT1/TT270 22mm Coupling, 75503 TT1/TT270 28mm Coupling, 75900 TT1/TT270 35mm Coupling, 75901 TT1/TT270 42mm Coupling, 75902 TT1/TT270 54mm Coupling, 75530 TT12/TT090 10mm Elbow, 75689 TT12/TT090 12mm Elbow, 75690 TT12/TT090 14mm Elbow, 75531 TT12/TT090 15mm Elbow, 75691 TT12/TT090 16mm Elbow, 75692 TT12/TT090 18mm Elbow, 75532 TT12/TT090 22mm Elbow, 75533 TT12/TT090 28mm Elbow, 75921 TT12/TT090 35mm Elbow, 75922 TT12/TT090 42mm Elbow, 75923 TT12/TT090 54mm Elbow, 75852 TT12CP/TT090 12mm Elbow, 75853 TT12CP/TT090 15mm Elbow, 75854 TT12CP/TT090 22mm Elbow, 75535 TT12S/TT092 10mm Street Elbow, 75536 TT12S/TT092 10mm x 15mm Strt Red Elbow, 75693 TT12S/TT092 12mm Street Elbow, 75537 TT12S/TT092 15mm Street Elbow, 75695 TT12S/TT092 16mm Street Elbow, 75696 TT12S/TT092 18mm Street Elbow, 75538 TT12S/TT092 22mm Street Elbow, 75924 TT12S/TT092 35mm Street Elbow, 75925 TT12S/TT092 42mm Street Elbow, 75926 TT12S/TT092 54mm Street Elbow, 75838 TT1CP/TT270 15mm Coupling, 75839 TT1CP/TT270 22mm Coupling, 75551 TT21/TT041 15mm Obtuse Elbow, 75703 TT21/TT041 16mm Obtuse Elbow, 75704 TT21/TT041 18mm Obtuse Elbow, 75552 TT21/TT041 22mm Obtuse Elbow, 75553 TT21/TT041 28mm Obtuse Elbow, 75927 TT21/TT041 35mm Obtuse Elbow, 75928 TT21/TT041 42mm Obtuse Elbow, 75929 TT21/TT041 54mm Obtuse Elbow, 75705 TT21S/TT040 12mm Obtuse Street El, 75585 TT21S/TT040 15mm Obtuse Street El, 75708 TT21S/TT040 18mm Obtuse Street El, 75586 TT21S/TT040 22mm Obtuse Street El, 75587 TT21S/TT040 28mm Obtuse Street El, 75930 TT21S/TT040 35mm Obtuse Street Elbow, 75931 TT21S/TT040 42mm Obtuse Street Elbow, 75932 TT21S/TT040 54mm Obtuse Street Elbow, 75555 TT24/TT130 10mm Equal Tee, 75709 TT24/TT130 12mm Equal Tee, 75710 TT24/TT130 14mm Equal Tee, 75556 TT24/TT130 15mm Equal Tee, 75712 TT24/TT130 18mm Equal Tee, 75557 TT24/TT130 22mm Equal Tee, 75558 TT24/TT130 28mm Equal Tee, 75933 TT24/TT130 35mm Equal Tee, 75934 TT24/TT130 42mm Equal Tee, 75935 TT24/TT130 54mm Equal Tee, 75861 TT24CP/TT130 15mm Equal Tee, 75862 TT24CP/TT130 22mm Equal Tee, 75565 TT25/TT130 15mm x 15mm x 10mm/TT130 15mm x 10mm x 15mm Tee, 75714 TT25/TT130 15mm x 15mm x 12mm/TT130 15mm x 12mm x 15mm Tee, 75719 TT25/TT130 18mm x 18mm x 15mm/TT130 18mm x 15mm x 18mm Tee, 75566 TT25/TT130 22 mm x 22mm x 10mm/TT130 22mm x 10mm x 22mm Tee, 75567 TT25/TT130 22 mm x 22mm x 15mm/TT130 22mm x 15mm x 22mm Tee, 75722 TT25/TT130 22 mm x 22mm x 18mm/TT130 22mm x 18mm x 22mm Tee, 75568 TT25/TT130 28 mm x 28mm x 15mm /TT130 28mm x 15mm x 28mm Tee, 75569 TT25/TT130 28 mm x 28mm x 22mm /TT130 28mm x 22mm x 28mm Tee, 75937 TT25/TT130 35 mm x 35mm x 22mm Tee, 75940 TT25/TT130 42 mm x 42mm x 22mm Tee, 75944 TT25/TT130 54 mm x 54mm x 22mm Tee, 75865 TT25CP 22mm x 22mm x 15mm /TT130 22mm x 15mm x 22mm Tee, 75724 TT26 15mm x 12mm x 15mm/TT130 15mm x 15mm x 12mm Tee, 75573 TT26 22mm x 15mm x 22mm/TT130 22mm x 22mm x 15mm Tee, 75574 TT26 28mm x 15mm x 28mm/TT130 28mm x 28mm x 15mm Tee, 75575 TT26 28mm x 22mm x 28mm/TT130 28mm x 28mm x 22mm Tee, 75869 TT26CP 22mm x 15mm x 22mm/TT130 22mm x 22mm x 15mm Tee, 75582 TT27/TT130 22mm x 15mm x 15mm Tee RedEndBch, 75584 TT27/TT130 28mm x 22mm x 22mm Tee RedEndBch, 75870 TT27CP/TT130 22mm x 15mm x 15mm RedEndBch, 75520 TT5 15mm x 1/2” BSP (M) Tank Coupling, 75521 TT5 22mm x 3/4” BSP (M) Tank Coupling, 75523 TT6/TT243 15mm x 10mm Reducer, 75524 TT6/TT243 15mm x 12mm Reducer, 75525 TT6/TT243 22mm x 15mm Reducer, 75526 TT6/TT243 28mm x 15mm Reducer, 75527 TT6/TT243 28mm x 22mm Reducer, 75909 TT6/TT243 35mm x 15mm Reducer, 75910 TT6/TT243 35mm x 22mm Reducer, 75911 TT6/TT243 35mm x 28mm Reducer, 75913 TT6/TT243 42mm x 22mm Reducer, 75914 TT6/TT243 42mm x 28mm Reducer, 75915 TT6/TT243 42mm x 35mm Reducer, 75917 TT6/TT243 54mm x 22mm Reducer, 75918 TT6/TT243 54mm x 28mm Reducer, 75919 TT6/TT243 54mm x 35mm Reducer, 75920 TT6/TT243 54mm x 42mm Reducer, 75590 TT61/TT301 10mm Stop End, 75731 TT61/TT301 12mm Stop End, 75732 TT61/TT301 14mm Stop End, 75591 TT61/TT301 15mm Stop End, 75733 TT61/TT301 16mm Stop End, 75734 TT61/TT301 18mm Stop End, 75592 TT61/TT301 22mm Stop End, 75593 TT61/TT301 28mm Stop End, 75868 TT61CP/TT301 15mm Stop End, 75600 TT62/TT062 10mm x 1/2” BSP (M) Str Tap Conn, 75736 TT62/TT062 12mm x 3/8” BSP (M) Str Tap Conn, 75601 TT62/TT062 15mm x 1/2” BSP (M) Str Tap Conn, 75740 TT62/TT062 16mm x 3/4” BSP (M) Str Tap Conn, 75603 TT62/TT062 22mm x 3/4” BSP (M) Str Tap Conn, 75604 TT63/TT063 10mm x 1/2” BSP (M) Bent Tap Conn, 75605 TT63/TT063 15mm x ½” BSP (M) Bent Tap Conn, 75850 TT6CP/TT243 22mm x 15mm Reducer. Brass Models: 75540 TT13/TT092G 15mm x 1/2” BSP (M) Male Elbow, 75833 TT13/TT092G 22mm x 3/4” BSP (M) Male Elbow, 75697 TT14/TT090G 14mm x ½” BSP (F) Female Elbow, 75545 TT14/TT090G 15mm x 1/2” BSP (F) Female Elbow, 75698 TT14/TT090G 16m m x 1/2” BSP (F) Female Elbow, 75831 TT14/TT090G 22mm x 3/4” BSP (F) Female Elbow, 75548 TT15/TT471G 12mm x 1/2” BSP (F) Backplate ELB, 75550 TT15/TT471G 15mm x 1/2” BSP (F) Backplate ELB, 75664 TT1R/TT240 14mm x 12mm Red Coupling, 75504 TT1R/TT240 15mm x 10mm Red Coupling, 75665 TT1R/TT240 15mm x 12mm Red Coupling, 75667 TT1R/TT240 16mm x 14mm Red Coupling, 75668 TT1R/TT240 18mm x 15mm Red Coupling, 75505 TT1R/TT240 22mm x 15mm Red Coupling, 75671 TT1R/TT240 22mm x 18mm Red Coupling, 75840 TT1RCP/TT240 15mm x 10mm Red Coupling, 75673 TT2/TT270G 12mm x 1/2” BSP (F) Female Cplng, 75675 TT2/TT270G 14mm x 1/2” BSP (F) Female Cplng, 75674 TT2/TT270G 14mm x 3/8” BSP (F) Female Cplng, 75510 TT2/TT270G 15mm x 1/2” BSP (F) Female Cplng, 75676 TT2/TT270G 16mm x 1/2” BSP (F) Female Cplng, 75677 TT2/TT270G 18mm x 1/2” BSP (F) Female Cplng, 75835 TT2/TT270G 18mm x 3/4” BSP (F) Strt Female Con, 75511 TT2/TT270G 22mm x 3/4” BSP (F) Female Cplng, 75678 TT2/TT270G 28mm x 1” BSP (F) Female Cplng, 75903 TT2/TT270G 35mm x 1.1/4” BSP (F) Str Fem Con, 75904 TT2/TT270G 42mm x 1.1/2” BSP (F) Str Fem Con, 75905 TT2/TT270G 54mm x 2” BSP (F) Str Fem Con, 75843 TT2CP/TT270G 15mm x 1/2” BSP (F) Female Coup, 75680 TT3/TT243G 10mm x 1/2” BSP (M) Male Coupling, 75679 TT3/TT243G 10mm x 3/8” BSP (M) Male Coupling.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110393

Size:

See model.

Marking:

Cupro Fit and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

EKYH0000, Equal coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, Straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, Reducing coupler: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, Fitting reducer: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, Female adapter: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, Male adapter: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, Long straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, Reducing elbow: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, Crossover:15mm, 22mm, 28mm EKYH0167, Part crossover: 15mm, 22mm, 28mm EKYH0201, Equal Tee: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, Reducing tee: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, Cap, size: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Approval Holder:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire

Postcode

DY11 7QN

View All Listings by this Company

Range of ‘StrengThin™’ 100 System couplings and fittings for use with stainless steel pipe (manufactured to EN 10217-7). For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206013

Size:

Please refer to model.

Marking:

Victaulic logo, model, size and technical information on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

StrengThin™ 100 System Couplings and Fittings comprising of models: No. E490, 90° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E491, 45° Elbow: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E492, Tee: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E493, Reducing Tee: DN65 x DN65 x DN50; DN80 x DN80 x DN50, DN80 x DN80 x DN65, DN100 x DN100 x DN50 DN100 x DN100 x DN65, DN100 x DN100 x DN80, DN125 x DN125 x DN65, DN125 x DN125 x DN80, DN125 x DN125 x DN100, DN150 x DN150 x DN80, DN150 x DN150 x DN100, DN150 x DN150 x DN125, DN200 x DN200 x DN100, DN200 x DN200 x DN125, DN200 x DN200 x DN150; DN250 x DN250 x DN1250, DN250 x DN250 x DN150, DN250 x DN250 x DN200; DN300 x DN300 x DN150, DN250 x DN250 x DN200 & DN250 x DN250 x DN250. No. E494, & E494G Adaptor Nipple: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E495, Concentric Reducer: DN65xDN50, DN80xDN50, DN80xDN65, DN100xDN50, DN100xDN65, CN100xDN80, DN125xDN80, DN125xDN100, DN150xDN100, D150xDN125, DN200xDN125, DN200xDN150, DN250xDN150, DN250xDN200, DN300xDN200 & DN300xDN250. No. E496, End Cap: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Style E497, Rigid Coupling: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. No. E498, Flange Adaptor: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300. Models added April 2024: Style E155 ‘StrengThin™’ 100 system Expansion Joint: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Manufacturer:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Kuterlite K900 Pro range of compression fittings with DZR brass bodies for use with copper pipe (EN 1254) Maximum working pressure for 8mm-10mm = 70.0 bar. Maximum working pressure for 12mm – 28mm = 20.0 bar. Maximum working pressure for 35mm – 54mm = 6.0 bar. Maximum operating temperature 90°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206027

Size:

Please refer to model.

Marking:

Kuterlite PRO, Flow arrow, EN 1254-2 and size on nut. CR on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

K910X: Straight Coupling 10mm to 54mm K911X: (M) Coupling 12mm to 54mm x ¼” BSP (M) to 2” BSP (M) K911PX: (M) Coupling 8mm to 54mm x ½” BSP (F) to 2” BSP (F) K911LBX: Long Tank Coupling 22mm x ¾” BSP (M) & 28mm x 1” BSP (M) K911TCX: Tank Coupling 15mm to 54mm x ½” BSP (M) to 2” BSP (M) K912X: (F) Coupling 12mm to 54mm x 3/8” BSP (F) to 2” BSP (F) K915X: Elbow 12mm to 54mm K916X: (M) Elbow 12mm to 54mm x 3/8” BSP (M) to 2” BSP (M) K916PX: (M) Elbow 15 to 28mm x ½” BSP (M) to 1” BSP (M) K916LBX: Long (M) Elbow 22mm x ¾” BSP (M) K917X: (F) Elbow 12mm to 42mm x 3/8” BSP (F) to 1.1/2” BSP (F) K917WX: (F) Wall Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918X: Equal Tee 10mm to 54mm K918BX: Tee (Reduced) 15mm to 54mm K918EBX: Tee End & Branch 15mm to 28mm K918EEX: Tee (Both Reduced) 12mm to 22mm K920X: (M) End Tee 15mm x ½” BSP (M) x 15mm K920HX: (M) Branch Tee 15mm x 15mm x ½” BSP (M) K923X: Cross 15mm KS926X: Swivel Tap Connector 15mm x ½” BSP (M) to ¾” BSP (M) & 22mm x ¾” BSP (M) K927X: Bent Tap Connector 15mm x ½” BSP (M) & 22mm x ¾” BSP (M) K930X: (F) Branch Tee 15mm to 28mm x 15mm to 28mm x ¼” BSP (F) to 1” BSP (F) K930EX: (F) End Tee 15mm to 28mm x ½” BSP (F) to ¾” BSP (F) x 15mm to 28mm K941X (F) Adaptor 22mm x ¾” BSP (F) K947X: Reducer 8mm to 28mm K948: Reducing Set 22mm to 28mm K949: Reducing Set 35mm to 54mm KS950X: Tank Connector 15mm to 54mm K951X: Stop End 12mm to54mm K953X: Crossover 15mm K972X: Blanking Plug 15mm to 54mm K1870X: Kufit Adaptor 15mm to 22mm K915XCP: Elbow 15mm & 35mm K917WXCP: Backplate Elbow 15mm x ½” BSP (F) & 22mm x ¾” BSP (F) K918XCP: Equal Tee 15mm K918BXCP: Tee (Reduced) 15mm to 28mm K947XCP: One Piece Reducer 15mm to 22mm

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). The HLE20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211802

Size:

End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLE11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLE11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLE11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLE20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLE20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLE20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLE20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLE30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208804

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

HLE11ECC-a Elbow 90 degree C X C: 8mm-108mm. HLE11ECC-b Street Elbow 90 degree Ftg X C: 8mm-108mm. HLE11ECC-c Street Elbow 45 degree Ftg X C: 8mm-108mm. HLE11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-e Elbow 45 degree C X C: 8mm-108mm. HLE11ECC-f Elbow 45 degree Long Turn C X C: 8mm-108mm. HLE11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-h Elbow 90 degree Long Turn C X C: 8mm-108mm. HLBGQW Partial Crossover Ftg x C: 12mm-28mm. HLE20CC-a Straight Coupling with dot C X C: 8mm-108mm. HLE20CC-b Slip Straight Coupling C X C: 8mm-108mm. HLE20CC-c Straight Coupling with groove C X C: 8mm-108mm. HLE21RCC-a Fitting Reducer Ftg X C: 8mm-108mm. HLE21RCC-b Reducing Coupler C X C: 8mm-108mm and ½” - 1”. HLE30TCC-a Equal TEE CxCxC: 8mm-108mm. HLE30TCC-b DWV Equal TEE CxCxC: 12mm-54mm. HLE31TRC Reducing Tee CxCxC: 8mm-108mm. HLE40CAP Cap: 8mm-108mm. HLGQW Full Crossover C x C: 12mm-28mm. HLNSZJ Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). HLUXW Return Bend Stop: 15mm-54mm. HLWSZJ Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). HLYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Range of end feed copper or gunmetal solder fittings for use with copper pipe. Maximum working pressure 16.0 bar (Sizes 8 - 28mm). Maximum working pressure 10.0 bar (Sizes 35 - 108mm). Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207803

Size:

8mm to 108mm

Marking:

Viega on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Copper models: 95002A - elbow 90°, 95001A - elbow 90°, 95041 - elbow 45°, 95040 - elbow 45°, 95090 - elbow 90°, 95092 - elbow 90°, 95103 - T-piece, 95085 - crossover, 95086 - crossover, 95270 - coupling, 95240 - reducing coupling, 95243 - reducing, 95301 - cap. Gunmetal models: 94130G - T-piece, 94243G - adapter, 94472G - Wall plate, 94090G - adapter elbow 90°, 94280G - adapter, 94270G - adapter, 94246G - plug-in piece, 94092G - adapter elbow 90°, 94340 - screw fitting, 94471G - wall plate elbow, 94096G - adapter union elbow 90°, 94340G - adapter union.

Approval Holder:

Viega GmbH & Co. KG

Company Name

Viega GmbH & Co. KG

Address

Viega Platz 1 Attendorn

Postcode

57439

Country

Germany

Phone

+49 (2722) 61-5280

General Email

andre.quartier@viega.de

View All Listings by this Company

Range of dual flush, WC outlet valves. CJ305 is operated via a push button assembly or with battery powered infra red sensor. CJ302 is controlled with a push button assembly for either full or reduced flush and both models incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2203023

Note:

R581 applies to infra-red only.

Size:

2” BSP (M)

Marking:

Cj302: Oceanwell and model number on valve body. CJ305: Oceanwell and model number on top of valve body.

Installation Requirements:

R001 R571 R581

Expiry date:

31/03/2027

Model:

Cj302 CJ305

Approval Holder:

Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name

Oceanwell (Xiamen) Industrial Co.,Ltd

Address

33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen

Country

China

Phone

+86-592-5710506

View All Listings by this Company

Manufacturer:

Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name

Oceanwell (Xiamen) Industrial Co.,Ltd

Address

33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen

Country

China

Phone

+86-592-5710506

View All Listings by this Company