Directory Search Results

Print List

#2210538

‘Ramofin PPH300G6BK11’. Black coloured, injection moulded, polypropylene material. For use with water up to 85°C.

Section:
5265 Polypropylene
Section Subtitle:
Material only. Components made from materials listed in this section may require to be submitted for audit tests.
WRAS Approval Number:
2210538
Expiry date:
31/10/2027

Approval Holder:
Polyram Ram-On Industries
Company Name
Polyram Ram-On Industries
Address
Ram-on 1920500, Israel
Phone
+972 6649 9555 Fax: +972 6649 9763

View All Listings by this Company

Print This Approval


#2210017

‘Tubular’ range of wall mounted spout outlets (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The box assembly incorporates a solenoid valve, screwdriver operated spherical valve and the spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210017
Size:
½” BSP (M)
Marking:
Stern on front face of spout.
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
Tubular 2030B (model code 350300). Tubular 2030E (model code 350400). Tubular 2030 LB (model code 350310). Tubular 2030 LE (model code 350410).

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2210026

A range of deck mounted, single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The temperature is controlled independently via a dome operating member. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and single check valve cartridges (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 5.0 Bar Maximum operating temperature 65 °C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210026
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8" BSP captive nut end connections.
Marking:
Stern base of tap
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
236930 Trendy TB 236935 Trendy TE

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2206324

Range of single hole, single outlet (swivel) electronically controlled tap assemblies. The flow and temperature is controlled by a ceramic cartridge headworks with single lever operating members. The flow is also controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The hose inlets incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2206324
Size:
Stainless steel braided PEX lined flexible hoses with 3/8” BSP (F) captive nut end connections.
Marking:
Schell and company logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2027
Model:
002420699 002430699 002440699

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#2212022

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The main body incorporates a stainless-steel strainer prior to the solenoid. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212022
Size:
Stainless steel braided PEX lined flexible hose assemblies with 3/8” BSP captive nut end connections.
Marking:
Stern on operating member.
Installation Requirements:
R001 R006 R009
Expiry date:
31/12/2027
Model:
237250 Extreme Plus B, 237300 Extreme E, 237200 Extreme B, 237350 Extreme Plus E.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2212034

Range of wall mounted tap assemblies for cold or premixed water with chromium plated brass bodies. Flow is controlled by a solenoid valve activated via an infra-red sensor and the spout outlets have plastic aerators. Supplied with stainless steel braided PEX lined connection hoses. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212034
Size:
10mm spigot.
Marking:
Stern logo on sensor plate.
Installation Requirements:
R001 R007 R040
Expiry date:
31/12/2027
Model:
340300 – Extreme WMB, 340200 – Extreme WME, 340400 – Extreme WM LB, 340500 – Extreme WM LE.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2212038

Range of single hole, single outlet, electronically controlled tap assemblies (chrome plated brass body). The flow is controlled by a solenoid valve activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Supplied with a stainless steel braided PEX lined flexible connection hose and a manual lever for controlling the temperature. Maximum working pressure 8.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212038
Size:
½” BSP male
Marking:
Stern on top of body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2027
Model:
239200 - Trendy 1000B, 239300 - Trendy 1000E, 239600 - Trendy 1000LB, 239700 - Trendy 1000LE, 239201 - Trendy 1000B AB1953, 239301 - Trendy 1000E AB1953, 239601 - Trendy 1000LB AB1953, 239701 - Trendy 1000LE AB1953.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2212069

Range of deck mounted single hole, single outlet (fixed) electronically controlled tap assemblies (stainless steel for models 236303 & 236404 only or chromium plated brass for all others). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. The inlets incorporate stainless steel strainers and the products are supplied with stainless steel braided PEX line connection hoses. Maximum working pressure 8.0 Bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2212069
Size:
10mm Spigot
Marking:
STERN on top of body.
Installation Requirements:
R001 R006 R009
Expiry date:
31/12/2027
Model:
235130 Smart XLB, 235220 Smart XLE, 236300 Elite B, 236400 Elite E, 236500 Elite LB, 236600 Elite LE, 236303 Elite B AISI316, 236404 Elite E AISI316.

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2206063

Bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow restrictor. Maximum working pressure 10.0 bar. Cold water only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2206063
Size:
½” BSP (M)
Marking:
Ideal Standard, Model, WRAS and BS1212-4 on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/06/2027
Model:
EEM90010002, EEM83230067 & EV98067

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2207048

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207048
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R280 R556 R571 R581 R001
Expiry date:
31/07/2027
Model:
TR9008. Model added March 2024 INST13008

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2207049

Concealed WC dual flushing cistern with a bottom entry BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207049
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9002 Model added March 2024 INST13002

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2203378

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203378
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
FF9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm FF9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm FF9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm FF9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm FF9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm FF9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. FF9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm FF9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added March 2023: FF9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm

Approval Holder:
Bathroom Engineering Ltd (Tece UK)
Company Name
Bathroom Engineering Ltd (Tece UK)
Address
The Boathouse Wirral Park Road
Postcode
BA6 9XE
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2304033

Range of non-verifiable single check valve assemblies with DZR brass bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
0030 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type EB - Non verifiable single check valve.
WRAS Approval Number:
2304033
Size:
See Models
Marking:
IDC “E” logo. PN, Size, CR and flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
ACV0040101 (1/2” BSP (F)), ACV0040201 (3/4” BSP (F)), ACV0040301 (1” BSP (F)), ACV0040401 (1.1/4” BSP (F)), ACV0040501 (1.1/2” BSP (F)), ACV0040601 (2” BSP (F))

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Print This Approval


#2303361

Range of insulated, black coloured polyethylene storage cisterns suitable for storing non-wholesome water. The cisterns incorporate an AB air gap arrangement with a meshed weir overflow arrangement. The cisterns are supplied with a float valve and blue plastic float. Cold water use only.

Section:
0090 Calorifiers
Size:
12 – 100 gallons.
Marking:
Poly, A30, Polytank and other technical information on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/03/2028
Model:
Polytank Poly A30 range comprising of models: PC12R-AB PC15R-AB PC18R-AB PC20R-AB PC25R-AB PC35R-AB PC42R-AB PC50R-AB PC70R-AB PC100R-AB

Approval Holder:
Polytank Group Ltd
Company Name
Polytank Group Ltd
Address
Naze Lane East Freckleton Preston
Postcode
PR4 1UN
Phone
+44 (0) 1772 632850
General Email
sales@polytank.co.uk

View All Listings by this Company

Print This Approval


#2303012

Range of thermostatic cartridges with brass or plastic bodies (see model) incorporating a stainless-steel strainer and EPDM ‘O’-rings. Maximum working pressure 10.0 Bar. Temperature: 75°C – GR-FX-X05S, GR-FX-01S, GR-FX-13T & GR-FX-X08. 65°C - GR-FX-04S & GR-FX-02TF.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2303012
Size:
See Model.
Marking:
Guoren on body (GR-FX-X05S) or strainer (all other models).
Installation Requirements:
R001
Expiry date:
31/03/2028
Model:
Plastic bodies GR-FX-04S: 32mm OD GR-FX-X05S: M26x1.5 GR-FX-01S: M24x1.0 Brass bodies GR-FX-02TF: 32mm OD GR-FX-13T: 32mm OD GR-FX-X08: M30x1.25

Approval Holder:
Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
Company Name
Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
Address
No. 2 RongShi Road, ChaYu Industrial Zone, Town ZeGuo
Country
WenLing,

View All Listings by this Company
Manufacturer:
Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
Company Name
Taizhou Guoren Thermostatic Sanitaryware Co. Ltd.
Address
No. 2 RongShi Road, ChaYu Industrial Zone, Town ZeGuo
Country
WenLing,

View All Listings by this Company

Print This Approval


#2304015

Range of thermostatic cartridges with a brass housing, stainless-steel filters and EPDM ‘O’-rings. For insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
2304015
Size:
M42X1.5
Marking:
HG (Hansgrohe) & product information on body.
Installation Requirements:
R001
Expiry date:
30/04/2028
Model:
30742361 30742371

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2212054

Range of single hole, single outlet pull out spray, combination tap assemblies (brass bodies, various finishes – see models) incorporating ceramic cartridge headworks with single lever operating members controlling the hot and cold and a quarter turn ceramic disk headwork with a dome type operating member controlling chilled water supply. The spout outlet incorporates a plastic aerator. The inlet from the tap to the pull-out spray hose incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2212054
Size:
Polyamide braided PEX lined flexible hose assemblies incorporating 3/8" BSP (F) captive nut end connections.
Marking:
Grohe on body
Installation Requirements:
R001 R009 R090
Expiry date:
31/12/2027
Model:
30601000 - Minta pull-out duo L-spout chrome, 30601DC0 - Minta pull-out duo L-spout supersteel, 30590000 - Minta pull-out duo L-spout chrome, 30590DC0 - Minta pull-out duo L-spout supersteel, 30590KF0 - Minta pull-out duo L-spout matt black. Models added June 2023: 416967045 - Minta pull-out duo L-spout chrome, 416967DC4 - Minta pull-out duo L-spout supersteel, 416967KF4 - Minta pull-out duo L-spout matt black.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2211060

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating quarter turn ceramic disc headworks with single lever operating members. The spout is a pull-down hose and handset with an optional spray function. The outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2211060
Size:
PEX lined flexible hose assemblies with stainless steel braiding with 1/2" BSP (F) captive nut end connection.
Marking:
Cooke & Lewis & Date of manufacture MM/YYYY on body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/11/2027
Model:
3663602930662

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#2303802

Range of single hole, single outlet (fixed) combination tap assemblies (chrome plated brass), incorporating ceramic cartridge headworks or ceramic disk headworks (model 152108) with single lever operating members. The spout outlet incorporates either a plastic aerator or flow straightener, (Model 152308 is only supplied with an aerator) . The products are supplied with a click type pop-up waste. 152108 and 179428 maximum working pressure 10.0 bar. 152038, 143338 and 179438 maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2303802
Note:
Click type waste verified by test.
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
PPI on rear of body
Installation Requirements:
R001 R010 R006
Expiry date:
31/03/2028
Model:
152108 152038 143338 179428 179438

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2301310

Range of single hole, single outlet combination tap assembly with brass bodies (chrome plated), incorporating ceramic cartridge headwork and single lever operating members. Spouts incorporate a plastic aerator. Model 3326530L is supplied with a lever-operated pop-up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2301310
Size:
Polyamide (PA) braided PEX lined flexible hoses ½” BSP captive nut.
Marking:
Grohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2028
Model:
3326530L, 3246730L.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company
Manufacturer:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 31 of 113

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.