Supreme S16 range of fittings for use with PE pipes (manufactured to EN12201-2). Supplied with a plastic pipe support liner For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310377

Size:

see model

Marking:

Supreme, made in Italy, sie and PN on fitting nut.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

90° Increasing Tee S070020025 20x25x20 S070025032 25x32x25 90° Reducing Tee S075025020 25x25x20 S075032025 32x32x25 S075040032 40x40x32 S075050032 50x50x32 S075050040 50x50x40 S075063050 63x63x50 S075075063 75x75x63 S075090075 90x90x75 S075110090 110x110x90 S075110063 110x63x110 90° Tee S080020020 20x20x20 S080025025 25x25x25 S080032032 32x32x32 S080040040 40x40x40 S080050050 50x50x50 S080063063 63x63x63 S080075075 75x75x75 S080090090 90x90x90 S080110110 110x110x110 90° Tee with Female Thread S085020012 20X20X1/2" S085020034 20X20X3/4" S085025012 25X25X1/2" S085025034 25X25X3/4" S085025100 25X25X1" S085032012 32X32X1/2" S085032034 32X32X3/4" S085032100 32X32X1" S085032114 32X32X1"1/4 S085040100 40X40X1" S085040114 40X40X1"1/4 S085040112 40X40X1"1/2 S085050114 50X50X1"1/4 S085050112 50x50x1"1/2 S085050200 50x50x2" S085063112 63x63x1"1/2 S085063200 63x63x2" S085063212 63x63x2"1/2 S085075200 75x75x2" S085075212 75x75x2"1/2 S085075300 75x75x3" S085090212 90x90x2"1/2 S085090300 90x90x3" S085110300 110x110x3" S085110400 110x110x4" 90° Tee with Male Thread S090020012 20x20x1/2" S090020034 20x20x3/4" S090025012 25x25x1/2" S090025034 25x25x3/4" S090025100 25x25x1" S090032012 32x32x1/2" S090032034 32x32x3/4" S090032100 32x32x1" S090032114 32x32x1"1/4 S090040100 40x40x1" S090040114 40x40x1"1/4 S090040112 40x40x1"1/2 S090050114 50x50x1"1/4 S090050112 50x50x1"1/2 S090050200 50x50x2" S090063112 63x63x1"1/2 S090063200 63x63x2" S090063212 63x63x2"1/2 S090075212 75x75x2"1/2 S090075300 75x75x3" S090090300 90x90x3" S090110401 110x110x4" Male Adaptor S095020012 20x1/2" S095020034 20x3/4" S095020100 20x1" S095025012 25x1/2" S095025034 25x3/4" S095025100 25x1" S095032012 32x1/2" S095032034 32x3/4" S095032100 32x1" S095032114 32x1"1/4 S095032112 32x1"1/2 S095040100 40x1" S095040114 40x1"1/4 S095040112 40x1"1/2 S095040200 m40x2" S095050114 50x1"1/4 S095050112 50x1"1/2 S095050200 50x2" S095063114 63x1"1/4 S095063112 m63x1"1/2 S095063200 63x2" S095063212 63x2"1/2 S095075200 75x2" S095075212 75x2"1/2 S095075300 75x3" S095090200 90x2" S095090212 90x2"1/2 S095090300 90x3" S095090400 90x4" S095110200 110x2" S095110300 110x3" S095110400 110x4" Female Adaptor S100020012 20x1/2" S100020034 20x3/4" S100025012 25x1/2" S100025034 25x3/4" S100025100 25x1" S100032012 32x1/2" S100032034 32x3/4" S100032100 32x1" S100032114 32x1"1/4 S100040100 40x1" S100040114 40x1"1/4 S100040112 40x1"1/2 S100050114 50x1"1/4 S100050112 50x1"1/2 S100050200 50x2" S100063112 63x1"1/2 S100063200 63x2" S100063212 63x2"1/2 S100075200 75x2" S100075212 75x2"1/2 S100075300 75x3" S100090200 90x2" S100090212 90x2"1/2 S100090300 90x3" S100090400 90x4" S100110200 110x2" S100110300 110x3" S100110400 110x4" Coupling S105020000 20 S105025000 25 S105032000 32 S105040000 40 S105050000 50 S105063000 63 S105075000 75 S105090000 90 S105110000 110

Repair Coupling S106020000 20 S106025000 25 S106032000 32 S106040000 40 S106050000 50 S106063000 63 S106075000 75 S106090000 90 S106110000 110 Reducing Coupling S110025020 25x20 S110032020 32x20 S110032025 32x25 S110040025 40x25 S110040032 40x32 S110050032 50x32 S110050040 50x40 S110063032 63x32 S110063040 63x40 S110063050 63x50 S110075050 75x50 S110075063 75x63 S110090063 90x63 S110090075 90x75 S110110063 110x63 S110110075 110x75 S110110090 110x90 Plug S115020000 20 S115025000 25 S115032000 32 S115040000 40 S115050000 50 S115063000 63 S115075000 75 S115090000 90 S115110000 110 90° Elbow S120020000 20 S120025000 25 S120032000 32 S120040000 40 S120050000 50 S120063000 63 S120075000 75 S120090000 90 S120110000 110 90° Elbow with Female Thread S125020012 20x1/2" S125020034 20x3/4" S125025012 25x1/2" S125025034 25x3/4" S125025100 25x1" S125032012 32x1/2" S125032034 32x3/4" S125032100 32x1" S125032114 32x1"1/4 S125040100 40x1" S125040114 40x1"1/4 S125040112 40x1"1/2 S125050114 50x1"1/4 S125050112 50x1"1/2 S125050200 50x2" S125063112 63x1"1/2 S125063200 63x2" S125063212 63x2"1/2 S125075212 75x2"1/2 S125075300 75x3" S125090300 90x3" S125090400 90x4" S125110400 110x4" 90° Elbow with Male Thread S130020012 20x1/2" S130020034 20x3/4" S130025012 25x1/2" S130025034 25x3/4" S130025100 25x1" S130032012 32x1/2" S130032034 32x3/4" S130032100 32x1" S130032114 32x1"1/4 S130040100 40x1" S130040114 40x1"1/4 S130040112 40x1"1/2 S130050114 50x1"1/4 S130050112 50x1"1/2 S130050200 50x2" S130063112 63x1"1/2 S130063200 63x2" S130063212 63x2"1/2 S130075212 75x2"1/2 S130075300 75x3" S130090300 90x3" S130090400 90x4" S130110400 110x4" Victaulic S134063200 63x2" S134110400 110x4" Flange Adaptor S135040112 40x1"1/2 S135050112 50x1"1/2 S135050200 50x2" S135063200 63x2" S135075212 75x2"1/2 S135075300 75x3" S135090300 90x3" S135090400 90x4" S135110400 110x4" Wall Plate Elbow S127020012 20x1/2" S127025034 25x3/4" 90° Elbow - Female Outlet 90° S128025012 25X25X1/2" S128032012 32X32X1/2" S128032034 32X32X3/4" Pipe Liner 772900020 20 772900025 25 772900032 32 772900040 40 772900050 50 772900063 63

Approval Holder:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Manufacturer:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company

Stainless steel press fittings incorporating EPDM ‘O’-rings for above ground use only. To be used with stainless steel 316L pipe (EN 10312). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310360

Size:

See models

Marking:

Ningbo Mingyang logo, size, grade on body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Coupling: VV-C15: 15mm, VV-C22: 22mm, VV-C28: 28mm, VV-C35: 35mm, VV-C42: 42mm, VV-C54: 54mm. Type A 90° elbow: VV-EA9015: 15mm, VV-EA9022: 22mm, VV-EA9028: 28mm, VV-EA9035: 35mm, VV-EA9042: 42mm, VV-EA9054: 54mm. Type A 45° elbow: VV-EA4515: 15mm, VV-EA4522: 22mm, VV-EA4528: 28mm, VV-EA4535: 35mm, VV-EA4542: 42mm, VV-EA4554: 54mm. Type B 90° elbow: VV-EB9015: 15mm, VV-EB9022: 22mm, VV-EB9028: 28mm, VV-EB9035: 35mm, VV-EB9042: 42mm, VV-EB9054: 54mm. Tee joint: VV-T15: 15mm, VV-T22: 22mm, VV-T28: 28mm, VV-T35: 35mm, VV-T42: 42mm, VV-T54: 54mm. Socket type flange transfer adapter: VV-F15: 15mm, VV-F22: 22mm, VV-F28: 28mm, VV-F35: 35mm, VV-F42: 42mm, VV-F54: 54mm. Reducing joint: VV-C2215: 22×15mm, VV-C2815: 28×15mm, VV-C2822: 28×22mm, VV-C3515: 35×15mm, VV-C3522: 35×22mm, VV-C3528: 35×28mm, VV-C4222: 42×22mm, VV-C4228: 42×28mm, VV-C4235: 42×35mm, VV-C5422: 54×22mm, VV-C5428: 54×28mm, VV-C5435: 54×35mm, VV-C5442: 54×42mm. Type B 45° elbow: VV-EB4515: 15mm, VV-EB4522: 22mm, VV-EB4528: 28mm, VV-EB4535: 35mm, VV-EB4542: 42mm, VV-EB4554: 54mm. Nut shift adapter: VV-AI15-1/2": 15mm×1/2, VV-AI22-1/2": 22mm×1/2, VV-AI22-3/4": 22mm×3/4, VV-AI28-1": 28mm×1, VV-AI35-11/4": 35mm×11/4, VV-AI42-11/2": 42mm×11/2, VV-AI54-2": 54mm×2. Female thread convert adapter(conical): VV-CI15-1/2": 15mm×1/2, VV-CI22-1/2": 22mm×1/2, VV-CI22-3/4": 22mm×3/4, VV-CI28-1": 28mm×1, VV-CI35-11/4": 35mm×11/4, VV-CI42-11/2": 42mm×11/2, VV-CI54-2": 54mm×2. Female thread 90°convert elbow(short): VV-EI9015-1/2": 15mm×1/2, VV-EI9022-1/2": 22mm×1/2, VV-EI9022-3/4": 22mm×3/4. Single head clamp reducer: VV-CP2215: 22×15mm, VV-CP2815: 28×15mm, VV-CP2822: 28×22mm, VV-CP3515: 35×15mm, VV-CP3522: 35×22mm, VV-CP3528: 35×28mm, VV-CP4222: 42×22mm, VV-CP4228: 42×28mm, VV-CP4235: 42×35mm, VV-CP5422: 54×22mm, VV-CP5428: 54×28mm, VV-CP5435: 54×35mm, VV-CP5442: 54×42mm. Tee with female thread (conical): VV-TI15-1/2": 15mm×1/2, VV-TI22-1/2": 22mm×1/2, VV-TI22-3/4": 22mm×3/4, VV-TI28-1/2": 28mm×1/2, VV-TI28-3/4": 28mm×3/4, VV-TI28-1": 28mm×1, VV-TI35-11/4": 35mm×11/4, VV-TI42-11/2": 42mm×11/2, VV-TI54-2": 54mm×2. Adjustable joint: VV-A15: 15mm, VV-A22: 22mm, VV-A28: 28mm, VV-A35: 35mm, VV-A42: 42mm, VV-A54: 54mm. Cap: VV-H15: 15mm, VV-H22: 22mm, VV-H28: 28mm, VV-H35: 35mm, VV-H42: 42mm, VV-H54: 54mm. Reducing tee: VV-T2215: 22×15mm, VV-T2815: 28×15mm, VV-T2822: 28×22mm, VV-T3515: 35×15mm, VV-T3522: 35×22mm, VV-T3528: 35×28mm, VV-T4222: 42×22mm, VV-T4228: 42×28mm, VV-T4235: 42×35mm, VV-T5422: 54×22mm, VV-T5428: 54×28mm, VV-T5435: 54×35mm, VV-T5442: 54×42mm. Tee adapter with male thread: VV-TE15-1/2": 15mm×1/2, VV-TE22-1/2": 22mm×1/2, VV-TE22-3/4": 22mm×3/4, VV-TE28-1/2": 28mm×1/2, VV-TE28-1": 28mm×1, VV-TE35-11/4": 35mm×11/4, VV-TE42-11/2": 42mm×11/2, VV-TE54-2": 54mm×2. Male thread convert adapter: VV-CE15-1/2": 15mm×1/2, VV-CE22-1/2": 22mm×1/2, VV-CE22-3/4": 22mm×3/4, VV-CE28-1": 28mm×1, VV-CE35-11/4": 35mm×11/4, VV-CE42-11/2": 42mm×11/2, VV-CE54-2": 54mm×2. Female thread 90°elbow (long): VV-EAI9015-1/2": 15mm×1/2, VV-EAI9022-1/2": 22mm×1/2, VV-EAI9022-3/4": 22mm×3/4, VV-EAI9028-1": 28mm×1, VV-EAI9035-11/4": 35mm×11/4, VV-EAI9042-11/2": 42mm×11/2, VV-EAI9054-2": 54mm×2. Male thread 90°elbow (long): VV-EAE9015-1/2": 15mm×1/2, VV-EAE9022-1/2": 22mm×1/2, VV-EAE9022-3/4": 22mm×3/4, VV-EAE9028-1": 28mm×1, VV-EAE9035-11/4": 35mm×11/4, VV-EAE9042-11/2": 42mm×11/2, VV-EAE9054-2": 54mm×2.

Approval Holder:

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Company Name

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Address

No. 255, Buzheng East Road, Wangchun Industrial Park, Haishu District, Ningbo, Zhejiang

View All Listings by this Company

Manufacturer:

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Company Name

Ningbo Mingyang Stainless Steel Pipe Co., Ltd.

Address

No. 255, Buzheng East Road, Wangchun Industrial Park, Haishu District, Ningbo, Zhejiang

View All Listings by this Company

Range of water meters with brass bodies, with integral plastic strainer and EPDM ‘O’- rings. The product is supplied with an optional combined plastic washer and stainless-steel strainer for installation on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See model.

Marking:

DIEHL, maximum pressure, ALTAIR, year of manufacture (YYYY) and other product information on the dial face. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

25/260 (ALTAIR V4 Type A2 DN25): 1¼” BSP (M) inlet and outlet, 32/260 (ALTAIR V4 Type A2 DN32): 1½” BSP (M) inlet and outlet.

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

67 rue du Rhône 68300 Saint-Louis

Country

France

View All Listings by this Company

Range of water meters with plastic or brass bodies, incorporating EPDM O-rings. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 - ¾” BSP (M) DN25 - 1 ¼” BSP (M) DN40 – 2” BSP (M)

Marking:

Baylan, model and technical info on upper body. Flow arrow on lower body

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

AK-411 DN15, DN20, DN25, DN32, DN40 AK-411P DN15, DN20, DN25, DN32, DN40

Approval Holder:

BAYLAN OLCU ALETLERI SAN. TICARET

Company Name

BAYLAN OLCU ALETLERI SAN. TICARET

Address

ANONIM SIRKETI AOSB 10032 SOKAK NO 16 CIGLI IZMIR TURKEY

View All Listings by this Company

ALTAIR V5 Type A3 range of inline and concentric water meters. Inline models have brass or plastic bodies, concentric models are available with DZR brass or plastic bodies, the MCI model has a plastic body. Incorporates a plastic strainer. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

ALTAIR V5 Type A3 DN20 (inline) & ALTAIR V5 Type A3 - MCI: 1” BSP (M). ALTAIR V5 Type A3 - CONCENTRIC & CONCENTRIC COMPOSITE: 2” BSP (M). Models added February 2025: 3/4" BSP (M) X 3/4" BSP (M) Models added January 2026: ALTAIR V5 Type A3 DN15-170mm 3/4" BSP male inlet and outlet ALTAIR V5 Type A3 DN20- 190mm 1" BSP male inlet and outlet ALTAIR V5 Type A3 DN20 Concentric 1”1/2" BSP male (concentric)

Marking:

All models: Diehl, ALTAIR, year of manufacture YYYY and technical information on dial face.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

ALTAIR V5 Type A3 DN20: 20/130, 20/165, 20/175, 20/190. ALTAIR V5 Type A3 CONCENTRIC: CONC. ALTAIR V5 Type A3 CONCENTRIC COMPOSITE: CONC COMP. ALTAIR V5 Type A3 MCI: MCI. Models added November 2024: ALTAIR V5 Type A3 DN20 – Plastic Bodies 20/165 & 20/190 Models added March 2025: ALTAIR V5 Type A3 DN15 15/110 15/115 15/165 15/170 Models added January 2026 ALTAIR V5 Type A3 DN15 - length: 110/115/134/165/170mm ALTAIR V5 Type A3 DN20 - length: 130/165/175/190mm ALTAIR V5 Type A3 DN20 – concentric

Approval Holder:

Diehl Metering GmbH

Company Name

Diehl Metering GmbH

Address

67 rue du Rhône 68300 Saint-Louis

Country

France

View All Listings by this Company

Manufacturer:

Diehl Metering SAS & Diehl Metering Sp. z o.o

Company Name

Diehl Metering SAS & Diehl Metering Sp. z o.o

Address

67 rue du Rhône/ul. Cieszyńska 1 A, BP 10160/43-440 Bażanowice France/Poland

View All Listings by this Company

Range of water meters with (blue epoxy coated) brass bodies and plastic working chamber. The inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 - ½” BSP (M) to DN40 - 1½” BSP (M).

Marking:

GAER, RGABER, Model and company info on dial face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2028

Model:

GMV range DN 15 DN 20 DN 25 DN 32 DN 40

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

calidad@hidroglobal.com

View All Listings by this Company

Range of water meters with DZR brass bodies and EPDM ‘O’-rings. The inlet incorporates either a plastic or stainless steel strainer (see model). The product is supplied loose fibre gaskets for installation on the inlet and outlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

Type (Horizontal) MTK3 & MTK3coder MP: 1¼” BSP (M) - 2⅜” BSP (M). Type (Rispipe VS & Downpipe VF) MTK3-VF & MTK3-VFcoder MP: 1¼” BSP (M) - 2” BSP (M). MTK3-VS & MTK3-VScoder MP: 1¼” BSP (M) - 2” BSP (M). Sizes added July 2025: Type (Horizontal) MTK3e: 1¼” BSP (M) - 2⅜” BSP (M). Type (Rispipe VS & Downpipe VF) MTK3-VFe: 1¼” BSP (M) - 2” BSP (M). MTK3-VSe: 1¼” BSP (M) - 2” BSP (M).

Marking:

GWF, barcode, production year (YYYY), serial number, measuring range (R..), meter type (MTK3, MTK3coder MP, MTK3-VF, MTK3-VFcoder MP, MTK3-VS, MTK3-VScoder MP, MTK3e, MTK3-VFe or MTK3-VSe), and other technical information on holding ring (around dial face). Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Type (Horizontal) MTK3 / MTK3coder MP: MTK3(coder MP) Q3 6,3 G1¼B DN25 260mm (Plastic strainer), MTK3(coder MP) Q3 10 G1¼B DN25 260mm (Plastic strainer), MTK3(coder MP) Q3 10 G1½B DN32 260mm (Plastic strainer), MTK3(coder MP) Q3 16 G2B DN40 300mm (Plastic strainer), MTK3(coder MP) Q3 25 G2 3/8B DN50 300mm (S/Steel strainer). Type (Rispipe VS & Downpipe VF) MTK3-VF & MTK3-VFcoder MP: MTK3-VF(coder MP) Q3 6,3 G1¼B DN25 150mm (S/Steel strainer), MTK3-VF(coder MP) Q3 10 G1½B DN32 150mm (S/Steel strainer), MTK3-VF(coder MP) Q3 16 G2B DN40 200mm (Plastic strainer). MTK3-VS & MTK3-VScoder MP: MTK3-VS(coder MP) Q3 6,3 G1¼ DN25 150mm (S/Steel strainer), MTK3-VS(coder MP) Q3 10 G1½B DN32 150mm (S/Steel strainer), MTK3-VS(coder MP) Q3 16 G2B DN40 200mm (Plastic strainer). Models added July 2025: MTK3e Q3 6,3 G1¼B DN25 260mm (Plastic strainer), MTK3e Q3 10 G1¼B DN25 260mm (Plastic strainer), MTK3e Q3 10 G1½B DN32 260mm (Plastic strainer), MTK3e Q3 16 G2B DN40 300mm (Plastic strainer), MTK3e Q3 25 G2 3/8B DN50 300mm (S/Steel strainer). Type (Rispipe VS & Downpipe VF) MTK3-VFe Q3 6,3 G1¼B DN25 150mm (S/Steel strainer), MTK3-VFe Q3 10 G1½B DN32 150mm (S/Steel strainer), MTK3-VFe Q3 16 G2B DN40 200mm (Plastic strainer). MTK3-VSe Q3 6,3 G1¼ DN25 150mm (S/Steel strainer), MTK3-VSe Q3 10 G1½B DN32 150mm (S/Steel strainer), MTK3-VSe Q3 16 G2B DN40 200mm (Plastic strainer).

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Manufacturer:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Pentobox range of water meter manifolds with plastic bodies and an integral spherical valve on the inlet. The models incorporate a non-return valve, (not suitable for backflow protection). Compression models are for use with metric and imperial PE80 pipe (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

Please refer to model.

Marking:

AVK logo and date stamp on cover. Flow arrow on meter box body. Date stamp and size on manifold. (Date stamps = two clocks, one for month, the other for year).

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

8054125521110301000: 25mm compression. 8054132521110301000: 32mm compression. 8054121521110301000: ½" compression. 8054326521110301000: ¾" BSP (F). 8054125521110331000: 25mm compression. 8054132521110331000: 32mm compression. 8054121521110331000: ½" compression. 8054326521110331000: ¾" BSP (F).

Approval Holder:

AVK UK Ltd.

Company Name

AVK UK Ltd.

Address

8 Rushmills, Northampton

Postcode

NN4 7YB

Country

United Kingdom

Phone

01246479100

General Email

chle@avkuk.co.uk

View All Listings by this Company

Range of flow sensors with or without brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

See models

Marking:

With body: Sika logo, flow arrow moulded on body; Sika logo, model number, pressure, flow arrow and other tech info on label on cable. Internal turbine without body: Sika logo, model number, date of manufacture (WWYY) and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Range of flow sensors with brass bodies, Type series VTY20 VY2061abcdefgh Flow sensor for DN20 VY2061MAHNefA5 Flow sensor with brass turbine body (CW617N-DW) 1”BSP(M) VY2061K50000YY Only internal turbine system without turbine body Models VY2061abcdefgh with ab: for body material (MA = Brass CW617N-DW, K5 = without turbine body, only the internal turbine system), with cd: for sensor and signal output (HN = Hall sensor NPN, 00 = without sensor), with ef: for electrical cable connection (various – in combination can be 00…99 or AA…ZZ, examples 05 = 500 mm, X1 = 80 mm with Molex plug connector), with gh: for process connection (A5 = G1 male thread - nominal size DN20, YY = without – only possible with ab = K5). Models VY2061abyyyyyzz with ab: for body material (MA = Brass CW617N-DW, K5 = without turbine body, only the internal turbine system), with yyyyy: for name of customer (5 digits), with zz: for consecutive number (2 digits, 01…99). Note: Models VY2061abyyyyyzz are customized versions CW724R brass version added June 2024.

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of pumps, single and 4-stage, with stainless steel bodies and plastic impellers. The pumps are housed within a plastic casing. The outlets of the WGZ15-20EA, WGZ15-45EA and WGZ15-45EAB models incorporate a non-return valve. The WGZ15-35EA.and WGZ15-35EAB models have a twin pump arrangement which incorporates a non-return valve within the connecting pipe between the pumps. Maximum working pressure 10.0 Bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2310307

Size:

1” BSP (F).

Marking:

Zhejiang Wigo Intelligence Pump Co., Ltd.GREENPRO (registered trademark of Zhejiang Wigo Intelligence Pump Co., Ltd.), Model No. and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2028

Model:

Frequency conversion booster pumps with 4 stages: WGZ15-45EA, WGZ15-45EAB. Frequency conversion booster pumps with single stage: WGZ15-20EA, WGZ15-35EA, WGZ15-35EAB.

Approval Holder:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Zhejiang Wigo Intelligence Pump Co., Ltd.

Company Name

Zhejiang Wigo Intelligence Pump Co., Ltd.

Address

No. 2 Shengda Road, Zeguo Town, Wenling Town, Zhejiang

Country

China

View All Listings by this Company