'Ultramid D3EG10 FC Aqua Black 23285'. Black coloured, injection moulded polyamide material. For use with water up to 65°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2205511

Expiry date:

31/05/2027

Approval Holder:

BASF SE

Company Name

BASF SE

Address

Carl-Bosch-Str. 38, 67056 Ludwigshafen

Country

Germany

View All Listings by this Company

'Badadur PBT9 GF30 Natur S1' (appears cream in colour) and 'Badadur PBT9 GF30 grau 930a' (grey coloured). Natural or grey coloured, injection moulded, glass reinforced PBT materials. For use with water up to 85°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

30/04/2027

Approval Holder:

Bada AG

Company Name

Bada AG

Address

Untere Strut 1, D-77815 Bühl/Baden

Country

Germany

General Email

waldecker@bada.de

View All Listings by this Company

'Pocan B1700 000000'. Natural (appears white in colour), injection moulded PBT material. For use with water up to 23°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

31/05/2027

Approval Holder:

Envalior Deutschland GmbH

Company Name

Envalior Deutschland GmbH

Address

Chempark Dormagen, D-41538 Dormagen

Country

Germany

View All Listings by this Company

'IRRIPLASTEC PE 100 WATER'. Dual layered, extruded pipe comprising of a white coloured (opaque), PE inner layer and a black coloured, PE outer layer. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2204514

Expiry date:

30/04/2027

Approval Holder:

Adritec Europe S.A.

Company Name

Adritec Europe S.A.

Address

16th Km Larissa-Agia Road, Larissa, 41500

Country

Greece

View All Listings by this Company

'Al Jubail PE100 Pipe'. Black coloured, extruded HDPE Pipe. For use with water up to 70°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2205515

Expiry date:

31/05/2027

Approval Holder:

Al Jubail Sanitary Pipe Factory Co. Ltd.

Company Name

Al Jubail Sanitary Pipe Factory Co. Ltd.

Address

PO Box 10177, Madinat Al-Jubailal, Sinayah 31961

Country

Saudi Arabia

View All Listings by this Company

'Lupolen 3621 M RM'. Off-white coloured, roto-moulded MDPE material. For use with water up to 23°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2204513

Expiry date:

30/04/2027

Approval Holder:

Basell Polyolefine GmbH

Company Name

Basell Polyolefine GmbH

Address

Industriepark Hochst, C657/R211 D-65926 Frankfurt

Country

Germany

View All Listings by this Company

‘Xytron™ G4020DW-FC BK00001 & Xytron™ G3020DW-FC BK00001’. Black coloured, injection moulded PPS materials. In September 2023 ‘Xytron G4020DW-FC NA99001’, natural (appears beige), injection moulded PPS material was added to the approval. All are for use with water up to 85°C.

Section:

5255 Polyphenylene Sulphide (PPS)

Expiry date:

31/12/2027

Approval Holder:

Envalior

Company Name

Envalior

Address

Flughafenstrasse 101, 40474 Dusseldorf

Country

Germany

View All Listings by this Company

'4270' components. Black coloured, injection moulded EPDM rubber components with a shore hardness of 70. ‘O’ rings (in-radius 1.31mm), washers (in-radius 1.05mm) & membranes (in-radius 1.75mm) made in Italy. ‘O’ rings (in-radius 1.31mm) & washers (in-radius 1.05mm) made in China. In May 2024 ‘shaped seals’ (in-radius of 1.8mm) made in Italy, were added to the approval. In November 2024, lip seals (in-radius of 0.7mm) made in Italy, were added to the approval. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

2209501

Expiry date:

30/09/2027

Approval Holder:

Ar-tex SpA

Company Name

Ar-tex SpA

Address

Via Rasetti 12 24060 Viadanica Bergamo

Country

Italy

Phone

+39 035 939 711

General Email

info@ar-tex.it

View All Listings by this Company

'VL1713M266B Black'. Black coloured, compression moulded EPDM rubber material. Shore hardness 60. Tested in-radius size 1.02mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2204523

Expiry date:

30/04/2027

Approval Holder:

Vernay Laboratories Inc

Company Name

Vernay Laboratories Inc

Address

120E South College Street Yellow Springs Ohio 45387

Country

USA

Phone

Tel: +1 937 7677261 Fax: +1 937 7677913

View All Listings by this Company

‘AA9HWZ (88 Sh.)’. Grades ‘AA6HWZ (60 Sh.), AA7HWZ (70 Sh.), AA7SWZ (70 Sh.), AA8HWZ (80 Sh.) were added in December 2022. Black coloured, compression moulded EPDM sheet materials. With a shore hardness of between 60 & 88. Tested in-radius size 1.15mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2204526

Expiry date:

30/04/2027

Approval Holder:

Gummiwerk Kraiburg GmbH & Co

Company Name

Gummiwerk Kraiburg GmbH & Co

Address

Teplitzer Strasse 20, D-84478 Waldkraiburg

Country

Germany

Phone

+49 8638 610 Fax: +49 8638 61310

View All Listings by this Company