Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2312316

Range of stainless steel press-fit fittings (316L) and pipes (316L - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312316
Size:: see models
Marking:: Fittings - CHNCON & Size on body. Pipe – CHNCON & Size.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: SM01 EQUAL COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM02 SLIP COUPLING: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM03 REDUCER MF: 18-15mm, 22-15mm, 22-18mm, 28-15mm, 28-18mm, 28-22mm, 35-18mm, 35-22mm, 35-28mm, 42-22mm, 42-28mm, 42-35mm, 54-22mm, 54-28mm, 54-35mm, 54-42mm, 76.1-42mm, 76.1-54mm, 88.9-54mm, 88.9-76.1mm, 108-76.1mm, 108-88.9mm. SM04 90° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM05 90°ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM06 45° ELBOW FF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM07 45° ELBOW MF: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS01 90° ELBOW WITH PLANE ENDS: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SS02 SHORT PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SS03 LONG PIPE BRIDGE: 15mm, 18mm, 22mm, 28mm. SM08 EQUAL TEE: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM09 REDUCING TEE: 18-15-18mm, 22-15-22mm, 22-18-22mm, 28-15-28mm, 28-18-28mm, 28-22-28mm, 35-15-35mm, 35-18-35mm, 35-22-35mm, 35-28-35mm, 42-15-42mm, 42-18-42mm, 42-22-42mm, 42-28-42mm, 42-35-42mm, 54-15-54mm, 54-18-54mm, 54-22-54mm, 54-28-54mm, 54-35-54mm, 54-42-54mm, 76.1-22-76.1mm, 76.1-28-76.1mm, 76.1-35-76.1mm, 76.1-42-76.1mm, 76.1-54-76.1mm, 88.9-22-88.9mm, 88.9-28-88.9mm, 88.9-35-88.9mm, 88.9-42-88.9mm, 88.9-54-88.9mm, 88.9-76.1-88.9mm, 108-22-108mm, 108-28-108mm, 108-35-108mm, 108-42-108mm, 108-54-108mm, 108-76.1-108mm, 108-88.9-108mm. SM10 TEE WITH MALE THREAD END: 15-R 1/2''-15mm, 18-R 1/2''-18mm, 22-R 3/4''-22mm, 28-R 1''-28mm, 35-R 1 1/4''-35mm. SM11 TEE WITH FEMALE THREAD END: 15-Rp 1/2''-15mm, 18-Rp 1/2''-18mm, 18-Rp 3/4''-18mm, 22-Rp 1/2''-22mm, 22-Rp 3/4''-22mm, 28-Rp 1/2''-28mm, 28-Rp 3/4''-28mm, 28-Rp 1''-28mm, 35-Rp 1/2''-35mm, 35-Rp 3/4''-35mm, 35-Rp 1''-35mm, 35-Rp 1 1/4''-35mm, 42-Rp 1/2''-42mm, 42-Rp 3/4''-42mm, 42-Rp 1''-42mm, 42-Rp 1 1/2''-42mm, 54-Rp 1/2''-54mm, 54-Rp 3/4''-54mm, 54-Rp 1''-54mm, 54-Rp 2''-54mm, 76.1-Rp 3/4''-76.1mm, 76.1-Rp 2''-76.1mm, 88.9-Rp 3/4''-88.9mm, 88.9-Rp 2''- 88.9mm, 108-Rp 3/4''-108mm, 108-Rp 2''-108mm. SM12 90° FEMALE ELBOW: 15mm-Rp 1/2'', 18mm-Rp 1/2'', 22mm-Rp 3/4'' , 28mm-Rp 1''. SM13 90° ELBOW WITH MALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM14 90°ELBOW WITH FEMALE THREAD END: 15mm-R 1/2'', 18mm-R 1/2'', 22mm-R 3/4'' , 28mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 2''. SM15 FEMALE ELBOW WITH WALL PLATE: NW-15mm-Rp 1/2'', NW-18mm-Rp 1/2'', NW-22mm-Rp 1/2''. SM16 MALE ADAPTOR: 15mm-R 1/2'', 18mm-R 1/2'', 18mm-R 3/4'', 22mm-R 1/2'', 22mm-R 3/4'', 22mm-R 1'', 28mm-R 3/4'', 28mm-R 1'', 35mm-R 1'', 35mm-R 1 1/4'', 42mm-R 1 1/4'', 42mm-R 1 1/2'', 54mm-R 1 1/2'', 54mm-R 2'', SM17 FEMALE ADAPTOR: 15mm-Rp 1/2'', 15mm-Rp 3/4'', 18mm-Rp 1/2'', 18mm-Rp 3/4'', 22mm-Rp 1/2'', 22mm-Rp 3/4'', 22mm-Rp 1'', 28mm-Rp 3/4'', 28mm-Rp 1'', 35mm-Rp 1'', 35mm-Rp 1 1/4'', 42mm-Rp 1 1/4'', 42mm-Rp 1 1/2'', 54mm-Rp 1 1/2'', 54mm-Rp 2''. SS04 MALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SS05 FEMALE CONNECTOR: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM18 ADAPTOR WITH UNION NUT: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 22mm- 1'', 28mm- 1'', 28mm- 1 1/4'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM19 ADAPTOR UNION WITH MALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM20 ADAPTOR UNION WITH FEMALE THREAD: 15mm- 1/2'', 18mm- 3/4'', 22mm- 3/4'' , 28mm- 1'', 35mm- 1 1/4'', 42mm- 1 1/2'', 54mm- 2''. SM21 CAP: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SM22 FLANGE WITH PRESS-JOINT: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. SP 1620 Stainless Steel Pipe - Φ x TH: 15mm x 1, 18mm x 1, 22mm x 1.2, 28mm x 1.2, 35mm x 1.5, 42mm x 1.5, 54mm x 1.5, 76.1mm x 2, 88.9mm x 2, 108mm x 2.

Approval Holder:: ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.

Company Name
ZHEJIANG ZHENGKANG INDUSTRIAL CO.,LTD.
Address
: NO.678 Dingxiang Road, Binhai Garden, Economic and Technological Development Zone, Wenzhou
Country
China

View All Listings by this Company

WRAS Approval Number: #2312317

Range of stainless steel press-fit fittings (316L or 304) and pipes (SUS316L or SUS304 - EN 10312), the fitttings incorporate EPDM O-rings. Crimp joint is achieved by a M profile crimp jaws. Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312317
Size:: see models
Marking:: Fittings - PIPRESS, size and stainless steel grade (SUS316L or SUS304). Pipe - PIPRESS, size and stainless steel grade (SUS316L or SUS304).
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Stainless Steel Press Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Adjustable Connector: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press B-type reducing connector: 18x15mm, 22x15mm, 22x18mm, 28x15mm, 28x18mm, 28x22mm, 35x15mm, 35x18mm, 35x22mm, 35x28mm, 42x15mm, 42x18mm, 42x22mm, 42x28mm, 42x35mm, 54x15mm, 54x18mm, 54x22mm, 54x28mm, 54x35mm, 54x42mm, 76.1x54mm, 88.9x54mm, 88.9x76.1mm, 108x54mm, 108x76.1mm, 108x88.9mm. Stainless Steel Press A-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 90°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press A-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press B-type 45°elbow: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press End cap: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Equal tee: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press Reducing Tee: 18×15mm, 22×15mm, 22×18mm, 28×15mm, 28×18mm, 28×22mm, 35×15mm, 35×18mm, 35×22mm, 35×28mm, 42×15mm, 42×18mm, 42×22mm, 42×28mm, 42×35mm, 54×15mm, 54×18mm, 54×22mm, 54×28mm, 54×35mm, 54×42mm, 76.1×22mm, 76.1×28mm, 76.1×35mm, 76.1×42mm, 76.1×54mm, 88.9×22mm, 88.9×28mm, 88.9×35mm, 88.9×42mm, 88.9×54mm, 88.9×76.1mm, 108×22mm, 108×28mm, 108×35mm, 108×42mm, 108×54mm, 108×76.1mm, 108×88.9mm. Stainless Steel Pipe Bridge: 15mm, 18mm, 22mm, 28mm. Stainless Steel Press Female adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female Swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×3/4'', 22mm×1‘’, 28mm×1'', 28mm×1-1/4'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 42mm×2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Male threaded adapter: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×3/4'', 28mm×1'', 35mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/4'', 42mm×1-1/2'', 54mm×1-1/2'', 54mm×2'', 76.1mm×2-1/2'', 88.9mm×3'', 108mm×4''. Stainless Steel Press Female threaded 90°elbow: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4'', 42mm×1-1/2'', 54mm×2''. Stainless Steel Press Female threaded 90°elbow with bracket: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Female Short 90°elbow: 15mm×1/2'', 18mm×1/2'', 22mm×1/2'', 22mm×3/4'', 28mm×1'', 35mm×1-1/4''. Stainless Steel Press Male threaded 90°elbow: 15mm× 1/2'', 18mm× 1/2'', 22mm× 1/2'', 22mm× 3/4'', 28mm× 1'', 35mm× 1-1/4'', 42mm× 1-1/2'', 54mm× 1-1/2'', 54mm× 2''. Stainless Steel Press Female Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×1/2'', 35mm×3/4'', 35mm×1'', 35mm×1-1/4'', 42mm×1/2'', 42mm×3/4'', 42mm×1-1/2'', 54mm×1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Male Threaded Tee: 15mm×1/2'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 28mm×1/2'', 28mm×3/4'', 28mm×1'', 35mm×3/4'', 35mm×1-1/4'', 42mm×3/4'', 42mm×1-1/2'', 54mm×3/4'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. Stainless Steel Press Flange: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm. Stainless Steel Press 3Pcs Union Male swivel adapter: 15mm×1/2'', 15mm×3/4'', 18mm×1/2'', 18mm×3/4'', 22mm×1/2'', 22mm×3/4'', 22mm×1'', 28mm×3/4'', 28mm×1'', 35mm×1-1/4'', 35mm×1-1/2'', 42mm×1-1/2'', 54mm×2'', 76.1mm×3/4'', 76.1mm×2'', 88.9mm×3/4'', 88.9mm×2'', 108mm×3/4'', 108mm×2''. PIPRESS-Stainless Steel Pipe: 15mm, 18mm, 22mm, 28mm, 35mm, 42mm, 54mm, 76.1mm, 88.9mm, 108mm.

Approval Holder:: ZHEJIANG QILU TECHNOLOGY CO., LTD.

Company Name
ZHEJIANG QILU TECHNOLOGY CO., LTD.
Address
BUILDING24, No.1399 LIANGMU ROAD, HANGZHOU
Country
China

View All Listings by this Company

WRAS Approval Number: #2312363

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312363
Size:: 16mm – 75mm.
Marking:: Geberit & size on fittings. Geberit, size, model & material on pipes.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:: Geberit Sales Ltd.

Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company
Manufacturer:: Geberit Sales Ltd.

Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

WRAS Approval Number: #240202047

‘Polyplumb’ plastic compression and push-fit fittings for use with polyethylene pipe (Polyguard PE80 ‐PE/AL/PE‐barrier pipe to BS8588), Polyplumb barrier pipe (to BS7291) & Copper pipe (to BS EN 1057). Inserts must be used to accommodate the Polyplumb Barrier pipes. For above and below ground use. Maximum working pressure: 12.5bar. Cold water use only.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240202047
Size:: See models.
Marking:: Polypipe logo, size, pressure rating on cap nut (Polyguard compression fittings). Polypipe logo, size, impression No, year code of manufacture (i.e. E=2022) on cap nut (Polyguard pushfit fittings). Polypipe logo or ‘Polypipe’, size, PE/AL/PE, Polyguard, date of manufacture (Polyguard barrier pipes). Polyplumb, size, PB Barrier, date of manufacture (Polyplumb barrier pipes).
Installation Requirements:: R001
Expiry date:: 28/02/2029
Model:: PGF40325 - 25mm x 3/4" Polyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40925 - 25mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40932 - 32mm Socket End Plug - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF4782515 - 25mm x 15mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47825 - 25mm x 22mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF47832 - 32mm x 28mm Copper Transition Coupling -Polyguard pushfit plastic fitting for use with Polyplumb barrier pipe and copper pipes. PGF402525 - 25mm x 25mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF403232 - 32mm x 32mm Transition Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PEbarrier pipe. PGF40025 - 25mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40032 - 32mm Straight Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40225 - 25mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40232 - 32mm Equal Tee - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40632 - 32mm x 25mm Reducing Coupler - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40132 - 32mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40125 - 25mm 90° Elbow - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40332 - 32mm x 1” Poyguard x FBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40425 - 25mm x 3/4" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe. PGF40432 - 32mm x 1" Polyguard x MBSP Coupling - Polyguard compression plastic fitting for use with Polyguard PE80 – PE/AL/PE-barrier pipe.

Product Images

Approval Holder:: Polypipe Limited (Trading as Polypipe Building Products)

Company Name
Polypipe Limited (Trading as Polypipe Building Products)
Address
Broomhouse Lane, Edlington, Doncaster
Postcode
DN12 1ES
Country
South Yorkshire
Phone
+44 (0) 1709 770000 Fax: 01709 770001
General Email
marketing@polypipe.com

View All Listings by this Company
Manufacturer:: Polypipe Limited (Trading as Polypipe Building Products)

Company Name
Polypipe Limited (Trading as Polypipe Building Products)
Address
Broomhouse Lane, Edlington, Doncaster
Postcode
DN12 1ES
Country
South Yorkshire
Phone
+44 (0) 1709 770000 Fax: 01709 770001
General Email
marketing@polypipe.com

View All Listings by this Company

WRAS Approval Number: #2311919

‘Hetta system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with multilayer pipe PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

Section:: 1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer
Section Subtitle:: Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.
WRAS Approval Number:: 2311919
Size:: Compression: 16mm, 20mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.
Marking:: Compression fittings: Tweetop ‘T’ logo, size, EN1254-3, production date and manufacturing source on compression nut. Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY, with a (month), A (Year), Y (production facility). Where: a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter L, S or A. e.g. bGA = manufactured February 2018 by facility A Pipe: , Hetta Systems, size, pressure ratings and date of manufacture (YYYY/MM/DD).
Installation Requirements:: R001
Expiry date:: 30/11/2028
Model:: PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63.
PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20 . COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.

Approval Holder:: Hetta Systems (UK) Ltd.

Company Name
Hetta Systems (UK) Ltd.
Address
UNIT E5 TRIDENT BUSINESS PARK DATEN AVENUE
Postcode
WA3 6AX
Country
WARRINGTON

View All Listings by this Company
Manufacturer:: Tweetop Sp Z.o.o

Company Name
Tweetop Sp Z.o.o
Address
ul.Ludowa 24 C 71-700 Szczecin Poland

View All Listings by this Company

WRAS Approval Number: #2312342

Instantor range of brass compression fittings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2312342
Size:: 8mm, 10mm, 12mm, 15mm, 22mm & 28mm
Marking:: Instantor, size & EN1254-2 on nut. ‘S’ cast on body of tee piece.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Instantor range comprising of models: Straight Coupler 410077 8mm C x C 410088 10mm C x C 410099 12mm C x C 410001 15mm C x C 410002 22mm C x C 410003 28mm C x C Straight Coupler Adaptor 410087 10 x 8mm C x C 410017 15 x 8mm C x C 410098 12 x 10mm C x C 410018 15 x 10mm C x C 410019 15 12mm C x C 410021 22 x 15mm C x C 410022 22mm x 3/4" C x C 410032 28 x 22mm C x C Straight Coupler 411077 8mm x 1/4" C x M.I 411079 8mm x 3/8" C x M.I 411071 8mm x 1/2" C x M.I 411087 10mm x 1/4" C x M.I 411089 10mm x 3/8" C x M.I 411081 10mm x 1/2" C x M.I Straight Coupler 411019 15mm x 3/8" C x M.I 411001 15mm x 1/2" C x M.I 411012 15mm x 3/4" C x M.I 411021 22mm x 1/2" C x M.I 411002 22mm x 3/4" C x M.I 411023 22mm x 1" C x M.I 411032 28mm x 3/4" C x M.I 411003 28mm x 1" C x M.I Straight Coupler 412079 8mm x 3/8" C x F.I. 412087 10mm 1/4" C x F.I. 412081 10mm x 1/2" C x F.I. 412089 10mm x 3/8" C x F.I. 412091 12mm x 1/2" C x F.I. 412019 15mm x 3/8" C x F.I. 412001 15mm x 1/2" C x F.I. 412012 15mm x 3/4" C x F.I. 412021 22mm x 1/2" C x F.I. 412002 22mm x 3/4" C x F.I. 412023 22mm x 1" C x F.I. 412032 28mm x 3/4" C x F.I. 412003 28mm x 1" C x F.I. Elbow 415077 8mm C x C 415088 10mm C x C 415001 15mm C x C 415002 22mm C x C 415003 28mm C x C 415021 22mm x 15mm C x C Elbow 416087 10mm x 1/4" C x M.I. 416089 10mm x 3/8" C x M.I. 416081 10mm x 1/2" C x M.I. 416001 15mm x 1/2" C x M.I. 416012 15mm x 3/4" C x M.I. 416021 22mm x 1/2" C x M.I. 416002 22mmx 3/4" C x M.I. 416023 22mm x 1" C x M.I. 416032 28mm x 3/4" C x M.I. 416003 28mm x 1" C x M.I. Elbow 417001 15mm x 1/2" C x F.I. 417021 22mm x 1/2" C x F.I. 417002 22mm x 3/4" C x F.I. 417023 22mm x 1" C x F.I. 417003 28mm x 1" C x F.I. 417012 3/4" x 15mm F.I. x C Equal Tee's 418777 8mm C x C x C 418888 10mm C x C x C 418001 15mm C x C x C 418002 22mm C x C x C 418003 28mm C x C x C Reducing Tee's 418211 22 x 15 x 15mm C x C x C 418212 22 x 15 x 22mm C x C x C 418221 22 x 22 x 15mm C x C x C 418313 28 x 15 x28mm C x C x C 418331 28 x 28 x 15mm C x C x C 418322 28 x 22 x 22mm C x C x C 418323 28 x 22 x 28mm C x C x C 418332 28 x 28 x 22mm C x C x C Wallplate Elbow 419001 15mm x 1/2" C x F.I. 421001 15mm x 1/2" C x F.I. HD 421002 22mm x 3/4" C x F.I. HD 430001 15mm x 15mm x 1/2" 430 Tee C x C x F.I 430002 22mm x 22mm x 3/4" 430 Tee C x C x F.I Stop End Compression 451007 8mm 451008 10mm 451001 15mm 451002 22mm 451003 28mm Compression Nut 478008 10mm 478A 478009 12mm 478A 478001 15mm 478A 478002 22mm 478A 478003 28mm 478A Compression Ring 479007 8mm 478B 479008 10mm 478B 479001 15mm 478B 479002 22mm 478B 479003 28mm 478B

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Conex Works, Santry Avenue, Dublin
Postcode
D09 K160
Country
Ireland
Phone
353 1 842 6255
General Email
sales@sanbra.ie

View All Listings by this Company

WRAS Approval Number: #2312347

Range of packaged plate heat exchangers comprising of stainless steel plates with EPDM gaskets. The products are supplied with twin primary circulation pumps, a secondary circulation pump, 3 port control valve and a control panel with full Mod BUS BMS connectivity. Maximum working pressure - Primary and Secondary circuits 10.0 bar. Maximum operating temperature 85°C.

Section:: 1350 Heat Exchangers
Size:: 25, 30, 35 and 38 Series: Primary circuit: 1¼” BSP (F) inlet x 1¼” BSP (M) outlet. Secondary circuit: 1¼” BSP (M) inlet x 1¼” BSP (F) outlet. 40 Series: Primary circuit: 1½” BSP (F) inlet x 1½” BSP (M) outlet. Secondary circuit: 1½” BSP (F) inlet x 1½” BSP (F) outlet. 50 Series: Primary circuit: 2” BSP (M) inlet/outlet. Secondary circuit: 2” BSP (F) inlet/outlet.
Marking:: CHWS logo on front of control unit. CHWS logo serial number and model number on label on back plate.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: Propak Thermal range: 25 Series: 2507, 2509, 2511, 2513, 2515. 30 Series: 3013, 3017, 3019, 3021, 3023, 3025, 3029, 3033, 3039, 3045. 35 Series: 3531, 3535, 3539, 3543. 38 Series: 3811, 3821, 3829, 3835, 3843, 3851, 3859, 3867, 3875. 40 Series: 4015, 4017, 4019, 4021, 4029, 4035, 4041. 50 Series: 5021, 5025, 5031, 5035, 5039, 5043, 5049.

Approval Holder:: Commercial Hot Water Solutions Ltd.

Company Name
Commercial Hot Water Solutions Ltd.
Address
THe Hive, Beaufighter Road, Weston-Super-Mare
Postcode
BS24 8EE

View All Listings by this Company

WRAS Approval Number: #240102040

Range of in-line ultrasonic water meters with DZR brass bodies and a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 1505 Water Meters
Size:: DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M).
Marking:: Hydrus, Saudi Meters Company, DN, PN, technical data and product information on meter face.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: Hydrus range: 3092801 (DN15), 3092646 (DN20), 3092804 (DN25), 3092805 (DN32).

Product Images

Approval Holder:: SAUDI METERS COMPANY

Company Name
SAUDI METERS COMPANY
Address
2nd Industrial Area-4719, Riyadh 14331-7141, Unit # 14, Kingdom of Saudi Arabia

View All Listings by this Company
Manufacturer:: SAUDI METERS COMPANY

Company Name
SAUDI METERS COMPANY
Address
Street # 173, 2nd Industrial Area, P.O. Box 185, Riyadh 11383, Saudi Arabia

View All Listings by this Company

WRAS Approval Number: #240102070

Range of in-line water meters with plastic or brass bodies (see model) with stainless-steel strainers at the inlet. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:: 1505 Water Meters
Size:: ½” BSP (M) (DN15), 1¼” BSP (M) (DN25), 1 ½” BSP (M) (DN32) or 2” BSP (M) (DN40) Inlets x Outlets
Marking:: Itron logo, Aquadis, Pressure, CE and other information on faceplate. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/01/2029
Model:: P1 HR Aquadis+ DN15 brass P1 HR Aquadis+ DN15 composite P111+ Aquadis+ DN25 brass P110+ Aquadis+ DN32 brass P290+ Aquadis+ DN40 brass

Product Images

Approval Holder:: Itron Metering Solutions UK Ltd

Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company
Manufacturer:: Itron Metering Solutions UK Ltd

Company Name
Itron Metering Solutions UK Ltd
Address
Unit 10, Haven Exchange Felixstowe Suffolk
Postcode
IP11 2QX
Phone
+44 161 865 1181

View All Listings by this Company

WRAS Approval Number: #2312083

CZ4000 range of in-line water meters with polyamide bodies and EPDM rubber `O` rings. The meters incorporate a plastic strainer. Maximum working pressure 16.0 Bar

Non-metallic materials and components comply with BS6920 at 50°C

Section:: 1505 Water Meters
Size:: ¾” BSP M Inlet x Outlet
Marking:: Contazara , Model, Pressure, CE and other information on faceplate.
Installation Requirements:: R001
Expiry date:: 31/12/2028
Model:: CZ4000 Range DN 15 110mm DN 15 115mm DN 15 134mm DN 15 165mm DN 15 170mm DN 15 190mm DN 20 110mm DN 20 115mm DN 20 134mm DN 20 165mm DN 20 170mm DN 20 190mm

Approval Holder:: Contadores De Agua De Zaragoza S.A. (Contazara S.A.)

Company Name
Contadores De Agua De Zaragoza S.A. (Contazara S.A.)
Address
Carretera Castellon KM. 5 5 50720 Zaragoza Spain

View All Listings by this Company