Two hole, wall mounted, double outlet (swivel) combination tap assembly (chromium plated brass). Incorporating rising spindle headworks on the tap body controlling the supply to the pull out hand held pre rinse outlet. An additional rising spindle headwork with a cross top operating member controls the flow to the spout outlet. Maximum working pressure 8.6 bar. Maximum operating temperature 85°C.

Section:

0570 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a double outlet and a swivel spout.

WRAS Approval Number:

2010358

Size:

¾” BSP (F)

Marking:

Encore logo (brand of CHG Europe B.V), series ID, material batch ID number on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/10/2025

Model:

KWP34-1014-FGEU

Product Images

Approval Holder:

CHG Europe B.V.

Company Name

CHG Europe B.V.

Postcode

THE NETHERLANDS

View All Listings by this Company

Three-hole, single outlet, fixed combination tap assembly with a brass body (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with lever type pop-up waste and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2011010

Size:

Stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hose with 3/8” BSP captive nut.

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2025

Model:

31 073 xxx Hansgrohe Metris Classic 3-hole basin mixer 100 with pop-up waste set. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of standpipes for bath/showers with a brass body (various finishes, see model). The standpipes incorporate an approved flexible hose. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2010021

Size:

Stainless steel braided EPDM lined hose assembly with a ¾” captive nut end connection

Marking:

SHS on base plate

Installation Requirements:

R001 R040

Expiry date:

31/10/2025

Model:

V238W-XX Standpipes for Bath / Showers Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headwork with cross top operating members and manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (optional aerator is also supplied) and the product is supplied with a shower hose, shower handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2010305

Size:

¾” BSP (M).

Marking:

Burlington Brands on indice on operating member.

Installation Requirements:

R001 R006 R020

Expiry date:

31/10/2025

Model:

CL15 – Burlington Claremont deck bath shower mixer

Product Images

Approval Holder:

Bathroom Brands Group Ltd.

Company Name

Bathroom Brands Group Ltd.

Postcode

DA1 5FU

Country

United Kingdom

Phone

01322 475 739

General Email

David.Cheshire@bathroombrands.com

View All Listings by this Company

`Wellmate` range of expansion vessels with plastic bodies and rubber diaphragms Maximum working pressure 8.6 Bar, cold water use only.

Section:

1000 Expansion Vessels

Size:

1” NPT (M) (060 to 150) or 1 ¼” NPT (M) (180 to 450)

Marking:

Marking: Pentair, Pentair logo, model & product info on label on body

Installation Requirements:

R001 R530 R535

Expiry date:

31/10/2025

Model:

WM0060 CE, WM0075 CE, WM0120 CE, WM0150 CE, WM0180 CE, WM0235 CE, WM0300 CE, WM0330 CE & WM0450 CE.

Product Images

Approval Holder:

Pentair Residential Filtration

Company Name

Pentair Residential Filtration

Address

20580 Enterprise Brookfield WI 53008-0730

Country

USA

View All Listings by this Company

Range of cylindrical expansion vessels incorporating butyl rubber diaphragms. The products are supplied with an Airfix TD T piece. Maximum working pressure of model Airfix D 35 litre is 8.0 bar. All other models have a maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2009016

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework. This product has not been tested or approved for anti-legionella claims made by the approval holder.

Size:

¾” BSP (F) x ¾” BSP (F) x ¾” BSP (F) tee piece connection

Marking:

Airfix, Flamco and technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Airfix D 8 litre, 12 litre, 18 litre, 25 litre & 35 litre.

Product Images

Approval Holder:

Flamco Limited

Company Name

Flamco Limited

Address

Washway Lane, St. Helens

Postcode

WA10 6PB

Phone

+44 (0) 1744 744 744

General Email

info@flamco.co.uk

View All Listings by this Company

Manufacturer:

Flamco BV

Company Name

Flamco BV

Address

Amersfoortseweg 9 3750 GM Bunschote Nederland

Phone

+31 182 591800 Fax: +31 182 522557

General Email

info@flamco.nl

View All Listings by this Company

Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010907

Size:

12mm & 14mm.

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

1013575 - UPONOR MLC PIPE WHITE 12x1,6 1013366 - UPONOR MLC PIPE WHITE 14x2,0 1014511 UPONOR S‐PRESS ADAPTER 14‐15CU 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 14‐R1/2"MT 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 14‐RP1/2"FT 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 14‐12CU L = 150 MM 1015615 UPONOR SMART RADI ELBOW ADAPTER PLATED S‐Press 14‐ 15 CU L = 350 MM 1014886 UPONOR S‐PRESS TEE 14‐14‐14 1015154 UPONOR S‐PRESS COUPLING 14‐14 1015437 UPONOR SMART AQUA TAP ELBOW S‐PRESS 14‐RP1/2"FT 1013813 Uponor Uni‐X compression adapter plated MLC UK 12‐ 15mmFT 1013831 Uponor Uni‐X compression adapter MLC UK 12‐15mmFT 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1/2"MT‐1/2"MT 1013914 UPONOR UNI‐C ELBOW PLATED MLC G1/2"MT‐G1/2"MT 1013946 UPONOR UNI‐C TEE PLATED MLC G1/2"MT‐ G1/2"MT‐G1/2"MT

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Range of copper and bronze capillary brazed fittings for use with copper pipe manufactured to EN1057:2006 +A1:2010. Maximum pressure 10.0 Bar (54mm up to and including 108mm) Maximum pressure 2.0 Bar (Over 108mm up to and including 159mm) Maximum operating temperature 100°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010034

Marking:

Marking: Flowflex logo, number of standard and size on the bodies

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

5002A LONG EQUAL 90DEG BEND EF (Size = mm Brazed): 5002A.67, 5002A.76, 5002A.89, 5002A.108. 5041 45DEG ELBOW EF (Size = mm Brazed): 5041.67, 5041.76, 5041.108, 5041.133, 5041.159. 5090 EQUAL ELBOW EF (Size = mm Brazed): 5090.67, 5090.76, 5090.89, 5090.108, 5090.133, 5090.159. 5092 STREET ELBOW EF (Size= mm Brazed): 5092.67, 5092.76. 5130 TEE EQUAL EF (Size = mm Brazed): 5130.67, 5130.76, 5130.108, 5130.133, 5130.159. 5130R TEE REDUCED BRANCH EF (Size = mm x mm x mm Brazed): 5130R.672867, 5130R.673567, 5130R.674267, 5130R.675467, 5130R.762876, 5130R.763576, 5130R.764276, 5130R.765476, 5130R.766776, 5130R.10835108, 5130R.10842108, 5130R.10854108, 5130R.10867108, 5130R.10876108, 5130R.133108133, 5130R.15954159, 5130R.15967159, 5130R.15976159, 5130R.159108159, 5130R.159133159. 5240 REDUCING CPLG (Size = mm x mm Brazed): 5240.67x42, 5240.67x54, 5240.76x54, 5240.76x67, 5240.89x76, 5243 FITTING RED EF (Size = mm x mm Brazed): 5243.67x22, 5243.67x28, 5243.67x35, 5243.67x42, 5243.67x54, 5243.76x35, 5243.76x42, 5243.76x54, 5243.76x67, 5243.89x76, 5243.108x42, 5243.108x54, 5243.108x67, 5243.108x76, 5243.108x89, 5243.133x67, 5243.133x76, 5243.133x108, 5243.159x76, 5243.159x108, 5243.159x133. 5270 COUPLING EF (Size = mm x mm Brazed): 5270.67, 5270.76, 5270.89, 5270.108, 5270.133, 5270.159. 5301 STOP END EF (Size = mm Brazed): 5301.67, 5301.76, 5301.89, 5301.108, 5301.159. 4270G CUFI STRAIGHT BRONZE ADAPTOR (Size = mm Brazed x BSP M): 4270G.67x2½”, 4270G.76x3", 4270G.108x4". 4243G CUIT ADAPTOR BRONZE (Size = mm Brazed by BSP F): 4243G.67x2½”, 4243G.76x2½”, 4243G.76x3", 4243G.108x4". Type of Tube: EN 1057:2006 +A1:2010 Seamless round copper tube, material condition R250 half hard

Product Images

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of press fittings incorporating copper or copper alloy bodies and EPDM O’-rings for use with copper tube to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010316

Size:

See model.

Marking:

Conex logo >B< on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Copper alloy: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (M) PIR4090G060600 – ¾” x ¾” BSP (M) PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½” BSP (M) PIR4092G060600 – ¾” x ¾” BSP (M) PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M) PIR4243G040600 – ½” x ¾” BSP (M) PIR4243G060400 – ¾” x ½” BSP (M) PIR4243G060600 – ¾” x ¾” BSP (M) PIR4243G080600 – 1” x ¾” BSP (M) PIR4243G080800 – 1” x 1” BSP (M) PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (M) PIR4471G060600 – ¾” – ¾” BSP (M) PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M) PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M) PIR4270G060600 – ¾” x ¾” BSP (M) PIR4270G080800 – 1” x 1” BSP (M Copper: PIR5040; - 45° Street Elbow PIR5040 040000 – ½” BSP (M) PIR5040 060000 – ¾” BSP (M) PIR5040 080000 – 1” BSP (M) PIR5001; - 90° Street Bend PIR5001 040000 – ½” BSP (M) PIR5001 060000 – ¾” BSP (M) PIR5001 080000 – 1” BSP (M) PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½” BSP (M) PIR5240 080400 – 1” x ½” BSP (M) PIR5240 080600 – 1” x ¾” BSP (M) PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½” BSP (M) PIR5002; - 90° Bend PIR5002 040000 – ½” BSP (M) PIR5002 060000 – ¾” BSP (M) PIR5002 080000 – 1” V PIR5041; - 45° Elbow PIR5041 040000 – ½” BSP (M) PIR5041 060000 – ¾” BSP (M) PIR5041 080000 – 1” BSP (M) PIR5130; - Equal Tee PIR5130 040000 – ½” BSP (M) PIR5130 060000 – ¾” BSP (M) PIR5130 080000 – 1” BSP (M) PIR5270; - Coupler PIR5270 040000 – ½” BSP (M) PIR5270 060000 – ¾” BSP (M) PIR5270 080000 – 1” BSP (M) PIR5301; – Stop End PIR5301 040000 – ½” BSP (M) PIR5301 060000 – ¾” BSP (M) PIR5301 080000 – 1” BSP (M) PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” BSP (M) PIR5130 080408 – 1” x ½” x 1” BSP (M) PIR5130 080608 – 1” x ¾” x 1” BSP (M) PIR5275; - Slip Coupler PIR5275 040000 – ½” BSP (M) PIR5275 060000 – ¾” BSP (M) PIR5275 080000 – 1” BSP (M) PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½” BSP (M) PIR5243 080400 – 1” x ½” BSP (M) PIR5243 080600 – 1” x ¾” BSP (M) PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½” BSP (M) Models added February 2021: PIR5130 080806 – 1” X 1” X ¾” BSP (M) PIR5130 040604 – ½” X ¾” X ½” BSP (M) PIR5130 060806 – ¾“ X 1” X ¾” BSP (M) PIR5130 040804 – ½” X 1” X ½” BSP (M) PIR5130 080404 – 1” X ½” X ½” BSP (M) PIR5130 080604 – 1” X ¾” X ½” BSP (M) PIR5130 080406 – 1” X ½” X ¾” BSP (M)

Product Images

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa SL

Company Name

IBP Atcosa SL

Address

General Email

View All Listings by this Company

Range of stainless-steel plate heat exchangers with copper brazing. Maximum working pressure 30.0 Bar. Maximum operating temperature 100°C.

Section:

1350 Heat Exchangers

Size:

1” BSP (M)

Marking:

UK Exchangers Ltd, maximum pressure, maximum temperature, WRAS, model number and other technical info on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

UKE-BR050 (20, 30, 40, 50 or 60 plates). UKE-BR050R (20, 30, 40, 50 or 60 plates). UKE-BR095H (20, 30, 40, 50, 60 or 80 plates).

Product Images

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company