Range of copper end feed fittings for use with copper tube manufactured to EN1057 For above and below ground use. 5mm to 54mm = Maximum working pressure 25.0 bar. 67mm to 159mm = Maximum working pressure 16.0 bar. Maximum operating temperature 100°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207337

Size:

see model

Marking:

K logo, standard & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

EENS – 90° Elbow 15mm code EENS015 22mm code EENS022 28mm code EENS028 35mm code EENS035 42mm code EENS042 54mm code EENS054 67mm code EENS067 76mm code EENS076 108mm code EENS108 159mm code EENS159 EEFS – 45° Elbow 15mm code EEFS015 22mm code EEFS022 28mm code EEFS028 35mm code EEFS035 42mm code EEFS042 54mm code EEFS054 67mm code EEFS067 76mm code EEFS076 108mm code EEFS108 159mm code EEFS159 REN – 90° Elbow-Reduction 22x15mm code REN02215 ECC – Straight Coupler 15mm code ECC015 22mm code ECC022 28mm code ECC028 35mm code ECC035 42mm code ECC042 54mm code ECC054 67mm code ECC067 76mm code ECC076 108mm code ECC108 159mm code ECC159 ENN – Fitting Reducer 22x15mm code ENN02215 28x15mm code ENN02815 28x22mm code ENN02822 35x15mm code ENN03515 35x22mm code ENN03522 35x28mm code ENN03528 42x22mm code ENN04222 42x28mm code ENN04228 42x35mm code ENN04235 54x22mm code ENN05422 54x28mm code ENN05428 54x35mm code ENN05435 54x42mm code ENN05442 67x28mm code ENN06728 67x35mm code ENN06735 67x42mm code ENN06742 67x54mm code ENN06754 76x42mm code ENN07642 76x54mm code ENN07654 76x67mm code ENN07667 108x54mm code ENN10854 108x67mm code ENN10867 108x76mm code ENN10876 159x76mm code ENN15976 159x108mm code ENN159108 EKK – Stop End 15mm code EKK015 22mm code EKK022 28mm code EKK028 35mm code EKK035 42mm code EKK042 54mm code EKK054 ERR – Reducer Coupler 22x15mm code ERR02215 28x15mm code ERR02815 28x22mm code ERR02822 35x15mm code ERR03515 35x22mm code ERR03522 35x28mm code ERR03528 42x22mm code ERR04222 42x28mm code ERR04228 42x35mm code ERR04235 54x22mm code ERR05422 54x28mm code ERR05428 54x35mm code ERR05435 54x42mm code ERR05442 67x28mm code ERR06728 67x35mm code ERR06735 67x42mm code ERR06742 67x54mm code ERR06754 76x35mm code ERR07635 76x42mm code ERR07642 76x54mm code ERR07654 76x67mm code ERR07667 108x42mm code ERR10842 108x54mm code ERR10854 108x67mm code ERR10867 108x76mm code ERR10876 159x76mm code ERR15976 159x108mm code ERR159108 ETE – Equal Tee 15mm code ETE015 22mm code ETE022 28mm code ETE028 35mm code ETE035 42mm code ETE042 54mm code ETE054 67mm code ETE067 76mm code ETE076 108mm code ETE108 159mm code ETE159 ETR-REB – Reduced End Tee 22x15x15mm code ETR0221515 28x22x22mm code ETR0282222 35x28x28mm code ETR0352828 ETR-RB – Reduced Branch Tee 22x22x15mm code ETR0222215 28x28x15mm code ETR0282815 28x28x22mm code ETR0282822 35x35x15mm code ETR0353515 35x35x22mm code ETR0353522 35x35x28mm code ETR0353528 42x42x15mm code ETR0424215 42x42x22mm code ETR0424222 42x42x28mm code ETR0424228 42x42x35mm code ETR0424235 54x54x15mm code ETR0545415 54x54x22mm code ETR0545422 54x54x28mm code ETR0545428 54x54x35mm code ETR0545435 54x54x42mm code ETR0545442 67x67x22mm code ETR0676722 67x67x28mm code ETR0676728 67x67x35mm code ETR0676735 67x67x42mm code ETR0676742 67x67x54mm code ETR0676754 76x76x22mm code ETR0767622 76x76x28mm code ETR0767628 76x76x35mm code ETR0767635 76x76x42mm code ETR0767642 76x76x54mm code ETR0767654 76x76x67mm code ETR0767667 108x108x28mm code ETR10810828 108x108x35mm code ETR10810835 108x108x42mm code ETR10810842 108x108x54mm code ETR10810854 108x108x67mm code ETR10810867 108x108x76mm code ETR10810876 159x159x54mm code ETR159159054 159x159x67mm code ETR159159067 159x159x76mm code ETR159159076 159x159x108mm code ETR159159108 ETR-RE – Reduced End Tee 22x15x22mm code ETR0221522 28x22x28mm code ETR0282228 ETR-BER – Reduced End Tee 15x15x22mm code ETR0151522 22x22x28mm code ETR0222228

Product Images

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

CB (CENTRE) Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208806

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CB, W & size on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

635690 EF Straight Coupler x 8mm 635691 EF Straight Coupler x 10mm 635692 EF Straight Coupler x 15mm 635693 EF Straight Coupler x 22mm 635694 EF Straight Coupler x 28mm 635695 EF Straight Coupler x 35mm 635696 EF Straight Coupler x 42mm 635697 EF Straight Coupler x 54mm 635698 EF Slip Coupling x 15mm 635699 EF Slip Coupling x 22mm 635700 EF Stop End x 8mm 635701 EF Stop End x 10mm 635702 EF Stop End x 15mm 635703 EF Stop End x 22mm 635704 EF Stop End x 28mm 635705 EF Stop End x 35mm 635706 EF Stop End x 42mm 635707 EF Stop End x 54mm 635708 EF Reducing Coupling x 15mm x 10mm 635709 EF Reducing Coupling x 22mm x 15mm 635710 EF Reducer x 10mm x 8mm 635711 EF Reducer x 15mm x 8mm 635712 EF Reducer x 15mm x 10mm 635713 EF Reducer x 22mm x 15mm 635714 EF Reducer x 28mm x 15mm 635715 EF Reducer x 28mm x 22mm 635716 EF Reducer x 35mm x 15mm 635717 EF Reducer x 35mm x 22mm 635718 EF Reducer x 35mm x 28mm 635719 EF Reducer x 42mm x 15mm 635720 EF Reducer x 42mm x 22mm 635721 EF Reducer x 42mm x 28mm 635722 EF Reducer x 42mm x 35mm 635723 EF Reducer x 54mm x 15mm 635724 EF Reducer x 54mm x 22mm 635725 EF Reducer x 54mm x 28mm 635726 EF Reducer x 54mm x 35mm 635727 EF Reducer x 54mm x 42mm 635728 EF Imperial to Metric Coupling x 15mm x 1/2" 635729 EF Imperial to Metric Coupling x 22mm x 3/4" 635730 EF Imperial to Metric Coupling x 28mm x 1" 635731 EF Elbow 90 Degree x 8mm 635732 EF Elbow 90 Degree x 10mm 635733 EF Elbow 90 Degree x 15mm 635734 EF Elbow 90 Degree x 22mm 635735 EF Elbow 90 Degree x 28mm 635736 EF Elbow 90 Degree x 35mm 635737 EF Elbow 90 Degree x 42mm 635738 EF Elbow 90 Degree x 54mm 635739 EF Elbow 45 Degree x 15mm 635740 EF Elbow 45 Degree x 22mm 635741 EF Elbow 45 Degree x 28mm 635742 EF Elbow 45 Degree x 35mm 635743 EF Elbow 45 Degree x 42mm 635744 EF Elbow 45 Degree x 54mm 635745 EF Street Elbow 90 Degree x 15mm 635746 EF Street Elbow 90 Degree x 22mm 635747 EF Street Elbow 90 Degree x 28mm 635748 EF Street Elbow 90 Degree x 35mm 635749 EF Street Elbow 90 Degree x 42mm 635750 EF Street Elbow 90 Degree x 54mm 635751 EF Street Elbow 45 Degree x 15mm 635752 EF Street Elbow 45 Degree x 22mm 635753 EF Street Elbow 45 Degree x 28mm 635754 EF Street Elbow 45 Degree x 35mm 635755 EF Street Elbow 45 Degree x 42mm 635756 EF Street Elbow 45 Degree x 54mm 635758 EF Equal Tee x 10mm 635759 EF Equal Tee x 15mm 635760 EF Equal Tee x 22mm 635761 EF Equal Tee x 28mm 635762 EF Equal Tee x 35mm 635763 EF Equal Tee x 42mm 635764 EF Equal Tee x 54mm 635765 EF Reducing Tee x 22 x 22 x 15mm 635766 EF Reducing Tee x 28 x 28 x 15mm 635767 EF Reducing Tee x 28 x 28 x 22mm 635768 EF Reducing Tee x 35 x 35 x 15mm 635769 EF Reducing Tee x 35 x 35 x 22mm 635770 EF Reducing Tee x 35 x 35 x 28mm 635771 EF Reducing Tee x 42 x 42 x 15mm 635772 EF Reducing Tee x 42 x 42 x 22mm 635773 EF Reducing Tee x 42 x 42 x 28mm 635774 EF Reducing Tee x 42 x 42 x 35mm 635775 EF Reducing Tee x 54 x 54 x 15mm 635776 EF Reducing Tee x 54 x 54 x 22mm 635777 EF Reducing Tee x 54 x 54 x 28mm 635778 EF Reducing Tee x 54 x 54 x 35mm 635779 EF Reducing Tee x 54 x 54 x 42mm 635780 EF Reducing Tee - One End Only x 22 x 15 x 22mm 635781 EF Reducing Tee - One End Only x 28 x 15 x 28mm 635782 EF Reducing Tee - One End Only x 28 x 22 x 28mm 635783 EF Reducing Tee - One End and Branch x 22 x 15 x 15mm 635784 EF Reducing Tee - One End and Branch x 28 x 22 x 22mm 635785 EF Reducing Tee - Both Ends Reduced x 15 x 15 x 22mm 635786 EF Full Crossover x 15mm 635787 EF Full Crossover x 22mm 635788 EF Partial Crossover x 15mm 635789 EF Partial Crossover x 22mm 635800 EF Straight Tap Connector x 15mm x 1/2" 635801 EF Straight Tap Connector x 15mm x 3/4" 635802 EF Straight Tap Connector x 22mm x 3/4" 635803 EF Bent Tap Connector x 15mm x 1/2" 635804 EF Straight Union Adaptor x 22mm x 1" 635805 EF Bent Union Adaptor x 22mm x 1"

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of heat exchangers connected to copper waste pipe, Where the waste is discharged down a “rotator” into a copper waste pipe, and potable water is returned to the shower/heating device via a copper double walled jacket around the copper waste pipe. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:

1350 Heat Exchangers

Size:

½” BSP (F)

Marking:

Manufacturer ( Builidng Product Distribution) Manufacturer address Type Category BPD Ltd Serial No. Model & other information on Adhesive label.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Showersave: QB1-21C QB1-16C QB1-12C QB1-21 Cyclone QB1-21 QB1-16 QB1-12 QB1-21D QB1-21D HE Models added June 2024 - maximum working pressure of 10.0 bar. QBI-2IXE QBI-I0XE

Product Images

Approval Holder:

BPD Limited

Company Name

BPD Limited

Address

View All Listings by this Company

Water control valve with a DZR brass body and EPDM ‘O’-rings. The product incorporates a pressure sensor, ultrasonic sensor, temperature sensor and a motorised spherical valve with a DZR brass ball (chrome plated) and PTFE seats. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2207042

Note:

This product has not been tested or approved for leak detection and automatic shut-off claims made by the approval holder.

Size:

¾” BSP (F) inlet and outlet.

Marking:

TOLLCO on adhesive label on body. CR, Size, flow arrow and HELA on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

2120013 Waterunit - Control (DN20).

Product Images

Approval Holder:

Tollco AB

Company Name

Tollco AB

Address

View All Listings by this Company

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2204088

Note:

Open outlet use only

Size:

See models

Marking:

AQUATOOLS on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AT821122 (F), AT821123 ½” BSP (M), AT821124 (M) & AT821125 (M) quick fit connectors

Approval Holder:

AQUATOOLS

Company Name

AQUATOOLS

Address

26 rue Charles Edouard Jeanneret 78300 Poissy

Country

France

View All Listings by this Company

Range of shower arms, ceiling arms, water intakes and wall mounted outlet brackets with either chrome plated brass or stainless steel). Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2204087

Note:

Open outlet use only.

Marking:

CP HART on base plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2027

Model:

Wall mounted shower arms: CPHSP2138, ZCPHSP2138, CPHSP213830, ZCPHSP213830, CPHSP213845 , ZCPHSP213845, CPHSP2584, ZCPHSP2584, CPHSP2585, ZCPHSP2585, CPHSP2538, ZCPHSP2538, CPHSP2945, ZCPHSP2945, CPHSP2946, ZCPHSP2946, CPHSP2587 & ZCPHSP2587 Ceiling mounted shower arms: CPHSP2586 & ZCPHSP2586 Water Intakes: CPHSP2013, ZCPHSP2013, CPHSP2954 & ZCPHSP2954 Wall outlet CPHSP2172, ZCPHSP2172, CPHSP2287, ZCPHSP2287, CPHSP2951, ZCPHSP2951, CPHSP2438, ZCPHSP2438, CPHSP2690 & ZCPHSP2690

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Wall mounted shower outlet with chrome plated body. The inlet incorporates a flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207320

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Schell on body

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

01.821 06 99

Product Images

Approval Holder:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Range of shower handsets with a black plastic body and EPDM ‘O’-rings. Model includes a trigger mechanism that alters the spray pattern. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207362

Note:

Open outlet only

Size:

½” BSP (M).

Marking:

Delmei on body

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

DK2164 Spray. B952430XG Spray.

Product Images

Approval Holder:

Xiamen Delmei Sanitary Ware Co Ltd

Company Name

Xiamen Delmei Sanitary Ware Co Ltd

Address

No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Pillar tap incorporating (chromium plated) brass body quarter turn ceramic disc headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 85°C. The product is supplied with metal backnuts.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2207364

Size:

½” BSP (M).

Marking:

Francis Pegler (brand of StH Westco.) on body From 01/08/2024 Clever on body.

Installation Requirements:

R001 R006

Expiry date:

31/07/2027

Model:

4S1211 ARAYA

Product Images

Approval Holder:

STH Westco Limited

Company Name

STH Westco Limited

Address

Unit C6 William Way Moss Industrial Estate St Helens Road Leigh

Postcode

WN7 3PT

Country

United Kingdom

Phone

01942 265230

General Email

john.gartshore@westco.co.uk

View All Listings by this Company

Range of concealed manually operated blending valves (brass bodies with chromium plated exposed trim sets) incorporating self-cancelling diverters (except models added December 2023 – 36020626 & 36020832) ceramic cartridge headworks controlling both temperature and flow with a single lever operating member. The inlets and the outlet incorporate approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2207012

Note:

IRN’s R030 will not apply to 36020626 & 36020832. This approval does not include a shower hose and handset or overhead shower.

Size:

½” (F) BSP

Marking:

Dornbracht on face plate

Installation Requirements:

R001 R010 R030 R040

Expiry date:

31/07/2027

Model:

Concealed Valves: 3502097090 3507097090 3502197090 3507197090 For use with exposed trim parts consisting of a ceramic cartridge, single lever operating member and self-cancelling diverter): 36120670 36120660 36120626 36120809 36120845 Models added December 2022 36120831 36120832 Models added December 2023: 36020626 (without self-cancelling diverter), 36020832 (without self-cancelling diverter), 36020831 (without self-cancelling diverter). Models added in December 2023 also for use with concealed parts listed above, however the diverter slot is plugged.

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company