Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251202033

Range of stainless-steel pressure sensors. Maximum working pressures: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o (Thread G1): 10.0 bar. B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with METEC - metallic measuring cell: 25.0 bar, B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o with Piezoresistive - metallic measuring cell: 40.0 bar. Maximum operating temperature 100°C

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: B83.a-b-C5-3-f-g-h-i-j-k-l-m-n-o: 1” BSP (M). B83.a-b-LF-e-f-g-h-i-j-k-l-m-n-o: ½” NPT (M) & ¼” NPT (F). B83.a-b-D8/N8/D4/CQ/VE/CH-e-f-g-h-i-j-k-l-m-n-o: DN25, DN50 and DN80 flanged.
Marking:: VEGA on body. VEGA model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: VEGABAR 83 range: B83.a-b-cd-e-f-g-h-i-j-k-l-m-n-o a = Scope: • Not relevant for WRAS approval b = Approval: • Not relevant for WRAS approval cd = Process fitting / Material (NOTE - PN40 indicated below is possible maximum, the actual maximum working pressure is dictated by measuring cell, see entry ‘e’): • Material: 316L, Alloy C276 • Threads o C5: Thread G1, ISO228-1 / 316L (only Piezoresistive - metallic measuring cell) o LF: Thread ½NPT, innen ¼NPT, ASME B1.20.1 / 316L - D8: Flange DN25 PN40 Form C, EN1092-1/ 316/316L (only Piezoresistive - metallic measuring cell) - N8: Flange DN25 PN40 Form B1, EN1092-1 / 316/316L - D4: Flange DN50 PN40 Form C, EN1092-1/ 316/316L - CQ: Flange DN50 PN40 Form B1, EN1092-1 / 316/316L - VE: Flange DN80 PN40 Form C, EN1092-1 / 316/316L - CH: Flange DN80 PN40 Form B1, EN1092-1 / 316/316L e = Process temperature • Is up to the Process fitting and Material Thread C5 -> 3 (EPDM) High Temperature (METEC measuring cell): F, H, or T Low temperature (Piezoresistive - metallic measuring cell): S or E f = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) g = Measuring range • Not relevant for WRAS approval (maximum is 40 bar) h = Accuracy class • Different accuracy classes from 0.075 % to 0.20 % i = Electronics • Not relevant for WRAS approval j = Supplementary electronics • Not relevant for WRAS approval k = Housing • Not relevant for WRAS approval l = Housing version / Protection • Not relevant for WRAS approval m = Cable entry / Connection • Not relevant for WRAS approval n = Display/adjustment module PLICSCOM • Not relevant for WRAS approval o = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: WRAS

Approval Holder:: VEGA Grieshaber KG

Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company
Manufacturer:: VEGA Grieshaber KG

Company Name
VEGA Grieshaber KG
Address
Am Hohenstein 113 Schiltach
Postcode
77761
Country
Germany
General Email
info.de@vega.com

View All Listings by this Company

WRAS Approval Number: #251215708

Range of EPDM expansion joints. Maximum working pressures: YXY6: 6.0 bar, YXY10: 10.0 bar, YXY16: 16.0 bar, YXY25: 25.0 bar. Maximum operating temperature 85°C.

Section:: 1530 Miscellaneous Fittings
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: ‘YXY’ (abbreviation of company name) on EPDM expansion body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: YXY6 and YXY10: DN20 - DN1200 flanged. YXY16: DN20 - DN500 flanged. YXY25: DN20 - DN600 flanged. Size added February 2026: YXY16: DN600 flanged.

Approval Holder:: Gongyi City New Yue Water Supply Material Co., Ltd

Company Name
Gongyi City New Yue Water Supply Material Co., Ltd
Address
Feiyao village, Zhitian Town, Gongyi City, Zhengzhou City, Henan province
Country
China

View All Listings by this Company
Manufacturer:: Gongyi City New Yue Water Supply Material Co., Ltd

Company Name
Gongyi City New Yue Water Supply Material Co., Ltd
Address
Feiyao village, Zhitian Town, Gongyi City, Zhengzhou City, Henan province
Country
China

View All Listings by this Company

WRAS Approval Number: #251202029

Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 251202029
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 855755 Eccentric coupling STOP CHECK: ½” BSP (M) x ¾” BSP (M) Offset Union. 855755UK In-line STOP CHECK: ½” BSP (M) x ¾” BSP (M).
Marking:: 855755 model: Delabie on valve body and cowl. 855755UK model: Delabie on cowl.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 855755 Eccentric coupling STOP CHECK, 855755UK In-line STOP CHECK.

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

WRAS Approval Number: #250702730

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. Maximum operating temperature 35°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702730
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: U3 & U5 : 1” BSP (F) inlet x 1” BSP (F) outlet. U7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. U9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Felsom, Exa Pumps Srl, model and other technical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Proviso:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:: ULTRA range: U 3 – XX/Y, U 5 – XX/Y, U 7 – XX/Y, U 9 – XX/Y, U 3 – XX/Y T, U 5 – XX/Y T, U 7 – XX/Y T, U 9 – XX/Y T, U 18 – XX/Y T. (U) 3/5/7/9/18 = nominal flow rate in m³/h. XX = nominal power HPx100. U3/T (single or three phase): 50-150. U5/T (single or three phase): 70-200. U7 (single phase): 100-300. U7T (three phase): 100-350. U9/T (single or three phase): 100-250. U18 (three phase only): 180-400. Y = Number of impellers. U3, U5 (single or three phase): 2-7 stages. U7 (single phase): 2-6 stages. U7 (three phase): 2-7 stages. U9 (single or three phase): 2-5 stages. U18 (three phase only): 2-4 stages. Suffix T = 3 phase.

Product Images

Approval Holder:: Exa Pumps SrL

Company Name
Exa Pumps SrL
Address
Via Tre Confini, 23 22010 Gera Lario CO
Country
Italy
Phone
0039 0344 910054
General Email
infor@exapumps.com

View All Listings by this Company

WRAS Approval Number: #241002725

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 241002725
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:: U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.
Marking:: Felsom, Exa Pumps Srl, model and other technical information on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/10/2029
Model:: ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Product Images

Approval Holder:: Exa Pumps SrL

Company Name
Exa Pumps SrL
Address
Via Tre Confini, 23 22010 Gera Lario CO
Country
Italy
Phone
0039 0344 910054
General Email
infor@exapumps.com

View All Listings by this Company

WRAS Approval Number: #251102026

Range of overhead shower outlets with (stainless steel bodies - various finishes). The inlet incorporates a combined EPDM washer and an approved check valve cartridge: however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: Open outlet use only. Maximum operating temperature 65.0°C

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 251102026
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F)
Marking:: 81xx8053 model: ABOUTWATER (brand of Fratelli Fantini S.p.A.) on body. 86xx8083 model: FANTINI on body.
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030
Model:: 81xx8053 86xx8083 Where xx denotes finish and can be replaced by: 01 = Gold plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 38 = 93 = Brushed Stainless steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD, S1 = Deep Black PVD, Q7 = Pure Brass PVD, Q8 = Raw Metal PVD.

Approval Holder:: Fratelli Fantini Spa

Company Name
Fratelli Fantini Spa
Address
Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

WRAS Approval Number: #2111074

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:: 1715 Strainers
Size:: DN50 up DN400 flanged inlet and outlet
Marking:: Pettinaroli logo, model, size and pressure on data plate on body. Size, pressure, batch number and flow arrow on body.
Installation Requirements:: R001
Expiry date:: 30/11/2026
Model:: ST2D (EN 1092-2 PN16 Flanges) ST2DA (ANSI Flanges)

Approval Holder:: Fratelli Pettinaroli Spa

Company Name
Fratelli Pettinaroli Spa
Address
Via Pianelli, 38 San Maurizio d'Opaglio (NO)
Postcode
28017
Country
Italy
Phone
+39 0322 96217
General Email
luca.rossi@pettinaroli.com

View All Listings by this Company

WRAS Approval Number: #251202040

Flexible safety hose assembly with PVC, composite inner hose and corrugated outer cover incorporating EPDM gaskets. The inlet of the hose incorporates a plastic strainer. The hose is fitted with an integral device which is intended to stop the flow of water (please note that this function has not been verified by test). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 251202040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: This product has not been tested or approved for anti-flooding claims made by the approval holder.
Size:: ¾” captive nut
Marking:: TP REFLEX, flow arrow, date of manufacture (DD.WW.YYYY), WRAS and technical information on cover of valve body. TP REFLEX and date of manufacture (date wheel) on elbow connection
Installation Requirements:: R001 R008
Expiry date:: 31/12/2030
Model:: S18 Safety inlet hose

Approval Holder:: TP Reflex Group S.p.A

Company Name
TP Reflex Group S.p.A
Address
Via Brescia 8, Tradate (VA)
Country
Italy
Phone
0331 816611
General Email
info@tp-spa.com

View All Listings by this Company

WRAS Approval Number: #250909001

Range of stainless steel, interlocked shower hoses with EPDM liner and O-rings. Open outlet use only. Maximum operating temperature 65°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 250909001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: G 1/2"
Marking:: AXOR or Hansgrohe laser etched on the nut.
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: 28 112 xxx - AXOR - Metal shower hose 1.25 m 28 116 xxx - AXOR - Metal shower hose 1.60 m 28 120 xxx - AXOR - Metal shower hose 2.00 m

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #260102003

Range of stainless-steel braided, EPDM lined flexible hose assemblies. The captive nut end connections incorporate a washer, the M10 connection incorporates an ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 260102003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models below
Marking:: VIOSPIRAL PAT UNI, WRAS and year of manufacture (YY) on ferrule. Ovoflex, WRAS and technical information on adhesive label on hose.
Installation Requirements:: R001
Expiry date:: 31/01/2031
Model:: Novaflex inox flexible connecting hose DN10, F-F 1/2'' BSP: 00-8XX Where XX denotes length: 00 - 20cm, 01 - 25cm, 02 - 30cm, 03 - 35cm, 04 - 40cm, 05 - 45cm, 06 - 50cm, 07 - 60cm, 08 - 70cm, 09 - 80cm, 10 - 90cm, 11 - 100cm, 12 - 120cm, 13 - 150cm, 14 - 200cm. Novaflex inox flexible connecting hose monoforo DN8, M10x1 - F 1/2'': 00-8XX Where XX denotes length: 35 - 30cm, 36 - 40cm, 37 - 50cm, 38 - 60cm, 39 - 80cm.

Approval Holder:: Viospiral SA

Company Name
Viospiral SA
Address
10 Kehagia Str AG I Rentis 18233
Country
Piraeus

View All Listings by this Company