Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2101327

Range of water meter manifolds with a plastic body and a spherical valve at the inlet. Models MB2012525DM & MB2010303DM incorporates two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection Model MB201010BM is for use with Irish Heavy gauge pipe manufactured to 15134/1977. All other models are for use with blue MDPE pipe manufactured to EN12201. Maximum working pressure 12.5 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Size:: see mdoel
Marking:: Ebco and flow arrow on body
Installation Requirements:: R001 R008
Expiry date:: 31/01/2026
Model:: MB2012525BM: 25mm pushfit. MB2012020BM: 20mm pushfit. MB2010101BM: ½” HG Irish compression. MB2010303BM: ¾” BSP (F). MB2011010BM: 25mm compression. MB2012525DM: 25mm pushfit. MB2010303DM: ¾” BSP (F).

Product Images

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #2109321

Range of circulation fittings with gun metal bodies, plastic cones & guides and EPDM ‘O’ rings. The products incorporate a dynamic venturi valve. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:: 1530 Miscellaneous Fittings
Size:: see model
Marking:: Kemper’s logo, flow arrow, DN and PN on body.
Installation Requirements:: R001
Expiry date:: 30/09/2026
Model:: 6501001500 - DN15 x ½” BSP (F) 6501002000 - DN20 x ¾” BSP (F) 6501002500 - DN25 x 1” BSP (F) 6501003200 - DN32 x 1 ¼” BSP (F) 6501004000 - DN40 x 1 ½” BSP (F) 6501005000 - DN50 x 2” BSP (F) 6502001500 - DN15 x ½” BSP (F) 6502002000 - DN20 x ¾” BSP (F) 6502002500 - DN25 x 1” BSP (F) 6502003200 - DN32 x 1 ¼” BSP (F) 6502004000 - DN40 x 1 ½” BSP (F) 6502005000 - DN50 x 2” BSP (F) 6501201500 - DN15 x ¾” BSP (M) 6501202000 - DN20 x 1” BSP (M) 6501202500 - DN25 x 1 ¼” BSP (M) 6501203200 - DN32 x 1 ½” BSP (M) 6501204000 - DN40 x 1 ¾” BSP (M) 6501205000 - DN50 x 2 3/8” BSP (M)

Product Images

Approval Holder:: Gebr. Kemper GmbH + Co. KG

Company Name
Gebr. Kemper GmbH + Co. KG
Address
Harkortstr. 5 57462 Olpe Germany
Phone
+49(0) 27618910
General Email
info@kemper-olpe.de

View All Listings by this Company

WRAS Approval Number: #2305069

Concealed wall mounted rough inset with a brass body, incorporating EDPM O-rings. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2305069
Size:: ½” BSP F Inlets
Marking:: SHS logo on body
Installation Requirements:: R001 R010 R040
Expiry date:: 31/05/2028
Model:: T2020-IS-XX Where the product code suffix ‘XX’ denotes the product is unfinished

Product Images

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

WRAS Approval Number: #2104307

Range of black plastic bodied multistage, self or manually primed, high pressure centrifugal pumps with a stainless steel outer casing, plastic impellors, EPDM seals and ‘O’-rings. Maximum working pressure 8.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 2104307
Size:: 1” BSP (M) x 1” BSP (M)
Marking:: WILO, manufacturers address, TYP, art no, date of manufacture (YYwWW, e.g. 20w51 - 2020 week 51) and other technical information on adhesive label on body.
Installation Requirements:: R001 R415
Expiry date:: 30/04/2026
Model:: HiMulti 3- range: Example code: HiMulti 3-23 P/1/5/230/S1 Where: HiMulti 3 = series name. 2 = Nominal flow (m3/h) (other possible value is 4). 3 = Number of Impellers (other possible values are 4 and 5). P = Self Priming version (other possible variant without P non self-priming variant) 1 single phase. 5 = Pump frequency - 50hz. 230 = Pump voltage - 230V S1 = Mechanical seal version.

Product Images

Approval Holder:: WILO France SAS

Company Name
WILO France SAS
Address

View All Listings by this Company
Manufacturer:: WILO France SAS

Company Name
WILO France SAS
Address

View All Listings by this Company

WRAS Approval Number: #2104051

Range of wall mounted hose union taps (brass, chrome plated brass or DZR brass body) incorporating a non-rising spindle headwork with a butterfly handle operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1780 Taps
Section Subtitle:: Hose union tap(s).
WRAS Approval Number:: 2104051
Size:: ¾” BSP male inlet x 19mmØ hose outlet
Marking:: V&G, WRAS and size on body. Model 13.20202.G20.CP5R-8511 also has ‘DR’ on body.
Installation Requirements:: R001 R040
Expiry date:: 30/04/2026
Model:: 13.20202.G20.CP03-8510. 13.20202.G20.CP5R-8510. 13.20202.G20.CP5R-8511.

Product Images

Approval Holder:: Zhejiang Valogin Technology Co. Ltd.

Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:: Zhejiang Valogin Technology Co. Ltd.

Company Name
Zhejiang Valogin Technology Co. Ltd.
Address
Qinggang Technological Ind. Zone, Yuhuan, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2103343

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL-F1400120012487 & JL-140038003813

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2012359

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C. Model added September 2021 (501500) has a maximum operating temperature of 120°C. All other models have a maximum operating temperature of 115°C.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 2012359
Size:: See model
Marking:: Caleffi logo on body.
Installation Requirements:: R001 R200
Expiry date:: 31/12/2025
Model:: Serie 502 Robocal: ⅜" BSP (M): 502430. 502430 CON. 502430 CST. 502431 BSC. 502434 CST. 502435 CST. 502533. 502533 FRT. 502533 RIF. 502533 TAK. 502934 CST. 502937 BSC. Art. 502 Robocal with flow valve: ¼" BSP (M): 502420. 502530. ⅜" BSP (M): 502530 TH. 502530 TH1. 502930 TH. Art. 502 Robocal Long: ⅜" BSP (M): 502630. 502630 CST. 502630 WLF. 502631 CST. 502635 CST. 502636 CST. 502638 CST. 502638 OEM. 502730. 502730 A. 502730 BSC. 502730 CST. 502730 GRN. 502730 NTR. 502822. ½" BSP (M): 502640. 502643A. 15mm compression: 502649. Art. 502 Minical ⅜": ⅜" BSP (M): 502030. 502030 CON. 502030 CST. 502031. 502034 CST. 502035 CST. 502036 CST. 502037 CST. 502037 VLL. 502037 WLF. 502038 CST. 502130. 502130 CST. 502130 ENC. 502130 FRT. 502130 GRN. 502130 TAK. 502130 TH. 502130 TH1. 502131. 502131 TH. 502132 DEC. 502133. 502134 DEC. 502135 RIF. 502231. 502231 CST. 502231 TH. 502232 TH. Art. 502 Minical ½" BSP (M): 502020 CST. 502040. 502040 CON. 502040 CST. 502040 MI. 502040A. 502041. 502041 MI. 502043. 502043 CST. 502043 IMM. 502043A. 502043A CST. 502046 IMM. 502140. 502140 ENC. 502140 FRT. 502141. 502142. 502144 ART. 502144 DEC. 502145 RIF. 502241. 502242 TH. 502243A. 502246 IMM. 502343A. ¾" BSP (M): 502050. 502051. 502052 CST. 1" BSP (M): 502060. 502061. Model added September 2021: ¾” BSP (F): 501500.

Product Images

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2103314

Range of manually adjustable pressure reducing valves with DZR brass bodies and EPDM ‘O’- rings. Maximum inlet pressure 15.0 bar, adjustable outlet range of 2.2 to 4 bar. Maximum operating temperature 60°C.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 2103314
Size:: See model
Marking:: Rubinetteria Malorani Pietro logo, size, CR, flow arrow, made in Italy and date of manufacture XX where the first x can be replaced by 1 = 1st quarter of the year etc, and the second x replaced by A = 2020, B = 2021, C = 2022.
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: Code 101 – 3/8” BSP (F) inlet/outlet Code 102 – 1/2” BSP (F) inlet/outlet Code 102MF – 1/2” BSP (F) inlet x ¾” BSP (M) outlet Models added January 2022 Code 102MF.12 – ½” BSP (M) x ½” BSP (F) Code 104MF – ½” BSP (M) x ¾” BSP (F)

Approval Holder:: Rubinetteria Malgorani Pietro Srl

Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 28010 Colazza Italy
Phone
0039 322 218129
General Email
fabio@malgorani.it

View All Listings by this Company
Manufacturer:: Rubinetteria Malgorani Pietro Srl

Company Name
Rubinetteria Malgorani Pietro Srl
Address
Via per Invorio 24 28010 Colazza Italy
Phone
0039 322 218129
General Email
fabio@malgorani.it

View All Listings by this Company

WRAS Approval Number: #2304047

Range of in-line, pressure reducing valves with DZR brass bodies and stainless-steel strainers. Maximum inlet supply pressure 16.0 bar. Outlet supply pressure is adjustable within the range of 1.5 bar to 6.0 bar. Maximum operating temperature 45°C or 65°C, please refer to model.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 2304047
Size:: ½” or ¾” BSP female or male inlet and outlet. 15mm or 22mm compression fitting inlet and outlet for use with copper pipe to BS EN 1057:2006+A1:2010.
Marking:: Reliance Water Controls, DN, DR, flow arrow and pressure on body.
Installation Requirements:: R001
Expiry date:: 30/04/2028
Model:: Cold water 312 Compact Series (operating temperature 45°C) comprising of models: PRED312020, PRED312025, PRED312001, PRED312005, PRED312010 & PRED312015. Hot water 312 Compact Series (operating temperature 65°C) comprising of models: PRED312070, PRED312071, PRED312075, PRED312076, PRED312050, PRED312055, PRED312060, PRED312061, PRED312065 & PRED312066.

Product Images

Approval Holder:: Reliance Worldwide Corporation

Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

WRAS Approval Number: #2203322

Range of pre-set angled pressure relief valves for use on primary closed circuits, incorporating DZR brass bodies, EPDM diaphram and EPDM or NBR ‘O’-ring. For maximum working pressure please refer to model. Maximum operating temperature 99°C.

Section:: 2210 Valves
Section Subtitle:: Pressure relief.
WRAS Approval Number:: 2203322
Size:: see model
Marking:: Caleffi logo, flow arrow and date of manufacture (WWYY) on body. Opening pressure on cap.
Installation Requirements:: R001 R200
Expiry date:: 31/03/2027
Model:: Series 311, 312, 3124, 313 & 314 ½” (FXF) models: 311412 - 120 pka 311415 - 1.5 bar 311425 - 2.5 bar 311425 CST - 2.5 bar 311430 – 3.0 bar 311430 CST – 3.0 bar 311431 – 3.0 bar 311431 CST – 3.0 bar 311435 - 3.5 bar 311440 – 4.0 bar 311450 – 5.0 bar 311460 – 6.0 bar 31147 – 7.0 bar 311480 – 8.0 bar 311490 CST – 9.0 bar 313425 - 2.5 313425 CST - 2.5 313430 – 3.0 bar 313432 – 3.0 bar 313432 CST – 3.0 bar 313433 – 3.0 bar 313434 – 3.0 bar 313440 CST – 4.0 bar 313460 – 6.0 bar 313470 – 7.0 bar 313580 – 8.0 bar ½” (MxF) models: 312405 CST – 4.0 bar 312406 CST – 2.0 bar 312407 CST – 6.0 bar 312415 CST – 5.0 bar 312418 CST – 8.0 bar 312417 CST – 1.0 bar 312443 CST – 3.0 bar 312471 CST – 7.0 bar 312411 BRT – 2.5 bar 312416 CST – 7.0 bar 312419 SD – 10.0 bar 312421 CST – 1.0 bar 312424 CST – 3.0 bar 312425 – 2.5 bar 312425 CST – 2.5 bar 312426 SD – 10.0 bar 312427 CST – 10.0 bar 312428 – 1.8 bar 312430 – 3.0 bar 312430 CST – 3.0 bar 312431 CST – 3.0 bar 312432 CST – 3.0 bar 312433 – 3.0 bar 312435 – 3.5 bar 312437 – 3.0 bar 312437 VLL 3.0 bar 312439 – 3.0 bar 312439 – 3.0 bar 312440 – 4.0 bar 312447 CST – 3.5 bar 312450 – 2.5 bar 312460 – 6.0 bar 312460 CST – 6.0 bar 312467 CST – 6.0 bar 312469 – 6.0 bar 312469 NTR – 6.0 bar 312470 – 7.0 bar 312473 – 7.0 bar 312477 VLL – 7.0 bar 312480 – 8.0 bar 312480 CST – 8.0 bar 312493 CST – 9.0 bar 314401 CST 1/2" M x F 314425 – 2.5 bar 314430 – 3.0 bar 314431 CST – 3.0 bar 314432 – 3.0 bar 314432 CST – 3.0 bar 314433 CST – 3.0 bar 314435 CST – 3.0 bar 314436 CST – 3.0 bar 314437 VLL – 3.0 bar 314439 CST – 3.0 bar 314442 CST – 4.0 bar 314460 – 6.0 bar 314462 – 6.0 bar 314462 CST – 6.0 bar 314470 – 7.0 bar 314472 CST – 7.0 bar 314478 OCN – 7.0 bar 314480 – 8.0 bar 314488 OCN – 8.0 bar 1/2" (clip x M) models: 312001 CST – 2.0 bar 312005 BSC – 3.0 bar 1/2" (clip x F) models: 312002 SD – 8.0 bar 312003 GRD – 2.5 bar 312004 CST – 2.0 bar 312006 GRD – 2.0 bar 312007 CST – 6.0 bar 312008 CST – 3.5 bar 312009 – 3.0 bar 312020 CST – 10.0 bar 312400 CST – 3.0 bar 312403 BRT – 3.0 bar 312404 CST – 3.0 bar 312408 BRT – 3.0 bar 312409 BSC – 3.0 bar 312410 CST – 2.5 bar 1/2" (MxM) models: 312412 SD – 10.0 bar 312414 SD – 3.0 bar 312422 CST – 2.0 bar 312429 VHG – 3.0 bar 312438 CST – 3.0 bar Added in April 2022 312020 CST - 10 Bar – ½” / Clip x F 312428 - 1.8 Bar – ½” / M x F

Product Images

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company