Range of Talbot pushfit fittings with polyprolylene or acetal bodies and EPDM o-rings for use with MDPE PE80 pipe (BS EN 12201). For use above and below ground use. Maximum working pressure 16 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310389

Size:

See models for pushfit fittings. Copper compression fittings – 15mm & 22mm for use with copper (EN1057).

Marking:

Talbot, size and pressure rating moulded on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Adaptor Male Thread - Type 1 Solid Body 20mm – 63mm: E6581; E6580; E6579; E6582; E9128; E3515; E3516; E10423. Adaptor Male Thread - Type 2 Cone and body 20mm – 32mm: E2729; E2371; E2732. Adaptor Female Thread - Type 1 Solid Body 20mm – 63mm: E11082; E5095; E3578; E5092; E5096; E3517; E8532; E6588; E8534; E8535; E8536. Adaptor Female Thread - Type 2 Cone and body 20mm – 32mm: E2730; E2735; E5094: E5098; E2736; E8625. Adaptor Female – Copper - Type 1 Solid Body 20mm for Above ground use ONLY: E4145. Adaptor Female – Copper - Type 2 Cone and Body 20mm - 25mm for Above ground use ONLY: E4147; E5182. Tank Connector - Type 1 Solid Body 25mm: E7248. Connector Body - Type 1 Solid Body 20mm – 63mm: E3520; E3521; E2831; E3522; E3523; E3995; E3524; E3525; E7283; E3996. Connector – Body Type 2 Cone and Body 20mm – 32mm: E2822; E2825; E2826; E2829; E2833. Equal Tee Connector - Type 1 Solid Body 20mm – 63mm: E3537; E3538; E3033; E3363; E3038; E3039; E3998; E3997. Equal Tee Connector - Type 2 Cone and Body 20mm – 32mm: E3032; E3037; E3042; E3036; E3040; E3041. Tee Connector P/f x F/Thread - Type 1 Solid Body 20mm – 63mm: E3035; E3043; E3044; E3045; E4355; E4356. Bend / Elbow Connector Body - Type 1 Solid Body 20mm – 63mm: E7734; E9010; E3518; E3519. Bend / Elbow Connector Body - Type 2 Cone and Body 20mm – 32mm: E2781; E2783; E2784. Elbow Connector Body P/F x F/Thread - Type 1 Solid Body 20mm – 63mm: E6151; E6152; E6153; E6154; E4353; E4354; E2787. Elbow Connector Body P/F x F/Thread - Type 2 Cone and Body 20mm – 32mm: E2782; E2789; 2788. Elbow Connector Body P/F x M/Thread - Type 1 Solid Body 25mm – 32mm: E4670; E4671. Stop End - Type 1 Solid Body 20mm – 63mm: E3364; E3365; E3366; E5097; E4375. Wall Plate Elbow - Type 1 Solid Body 20mm – 32mm: E2798; E2799; E2800. Repair Connector Straight - Type 1 Solid Body 20mm – 32mm: E7782; E7777; E7778.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of syphonic flush valves with plastic bodies. Cold water only

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311324

Size:

½” BSP

Marking:

Derwent Macdee

Installation Requirements:

R001 R571 R572

Expiry date:

30/11/2028

Model:

DSD1538 DSD1683 DSD7125 DSD8225 DSD9225 140108 140037

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Manufacturer:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Range of manually operated and sensor operated dual flush WC outlet valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2310323

Size:

1 ½” BSP (M), 2” BSP (M).

Marking:

Wirquin moulded on body.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

31/10/2028

Model:

JOLLYFLUSH – 81811129, JOLLYFLUSH – 10120446, JOLLYTRONIC – 10120021.

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Range of plate heat exchangers with stainless steel plate bodies and copper brazing. Maximum working pressure: 45 Bar. Maximum operating temperature: 99 °C.

Section:

1350 Heat Exchangers

Size:

See models.

Marking:

Hrale logo, Model, pressure and product info on adhesive label.

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

B3-5, B3-6, B3-9 - ¼” BSP (F) or ⅜” welded pipe connections. B3-12, B3-13, B3-14, B3-15, B3-23, B3-36 & B3-42 - ¾” BSP (M) or 7/8” welded pipe connections. B3-14 DW, B3-16, B3-18 & B3-20 - 1” BSP (M) or 7/8” welded pipe connection. B3-26, B3-27, B3-52, B3-52 DW, B3-60, B3-40, B3-68 & B3-80 - 1 ¼” BSP (M) or 1 ⅜” welded pipe connections. B3-32, B3-32 DW & B3-35 - 1” BSP (M) or 1 1/8” welded pipe connections. B3-63, B3-95, B3-95 DW, B3-115 – 2 ½” BSP (M) or 2 ⅜” welded pipe connections. B3-105 – 3” BSP (M) or 3” welded pipe connections. B3-30 – 1” BSP (M) or 1” welded pipe connections.

Approval Holder:

Ningbo Hrale Plate Heat Exchanger Co., Ltd.

Company Name

Ningbo Hrale Plate Heat Exchanger Co., Ltd.

Address

No. 98, Binwan Road, Binhai New Area, Fenghua, Ningbo, China

View All Listings by this Company

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2309373

Note:

Open outlet use only.

Size:

8mm pushfit.

Marking:

CARYSIL on body. Technical information on adhesive label on body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

GCBHTTANK (Grey), CBHTTANK (Black), WCBHTTANK (White).

Approval Holder:

CARYSIL BRASSWARE LTD

Company Name

CARYSIL BRASSWARE LTD

Address

20 WHITCLIFFE ROAD WEST YORKSHIRE

Postcode

BD19 3NU

View All Listings by this Company

Range of ultrasonic water meters with plastic bodies and transdcuers, and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. BS6920 50°C.

Section:

1505 Water Meters

Size:

See model

Marking:

Integra logo (‘INTEGRA’), TOPAS SONIC, size, pressure and other technical information on meter face.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

TOPAS COMPOSITE (TSM) DN15, L110: ¾” BSP (M) inlet/outlet. TOPAS COMPOSITE (TSM) DN20, L135: 1” BSP (M) inlet/outlet. TOPAS COMPOSITE (TSM) DN20, L165: 1” BSP (M) inlet/outlet. TOPAS COMPOSITE (TSM) DN20, L190: 1” BSP (M) inlet/outlet.

Approval Holder:

INTEGRA Metering SAS

Company Name

INTEGRA Metering SAS

Address

18 avenue Escadrille Normandie Niemen BLAGNAC

Postcode

31700

Country

France

Phone

+33 561 112 356

General Email

seda.bourneuf@im-ultrasonic.com

View All Listings by this Company

Range of water meters with blue epoxy power coated cast iron bodies, incorporating plastic turbines, NBR ‘O’-rings and gaskets. Maximum working pressure 16.0 bar. BS6920 50°C.

Section:

1505 Water Meters

Size:

DN50 - DN200 flanged

Marking:

GAER, model number and other technical info printed on dial face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

GMW PLUS RANGE

Approval Holder:

Hidroglobal Tecnologia del Agua S.A.

Company Name

Hidroglobal Tecnologia del Agua S.A.

Address

C/ GARBÍ 3 Pol.Ind. Can Volart PARETS DEL VALLÈS

Postcode

08150

Country

Spain

Phone

+34 93 573 74 00

General Email

calidad@hidroglobal.com

View All Listings by this Company

Range of water meter manifolds with brass or DZR brass bodies. The outlets incorporate non-return valves (not suitable for backflow protection). For use with copper pipe manufactured to BS EN 1057 (WBBADAPT112). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

2311061

Note:

Products supplied with blanking cap and O-ring for transportation. R009 applies to plastic cap

Size:

See model.

Marking:

MWM and flow arrow on body - WBBADAPT112. MWM, CR and flow arrow on body - WBBADAPT112-F.

Installation Requirements:

R001 R009

Expiry date:

30/11/2028

Model:

WBBADAPT112 - 15mm compression brass, WBBADAPT112-F - ¾” BSP (F) DZR.

Approval Holder:

MWM Distributors Ltd

Company Name

MWM Distributors Ltd

Address

Units 52 & 53 Enfield Industrial Estate Windsor Road

Postcode

B97 6DE

Country

Redditch

Phone

+44 (0) 1527 68200

General Email

sales@mwmdistributorltd.com

View All Listings by this Company

Range of single and doubled sphered rubbered expansion bellows incorporating a variety of flanged end connections. Style 99 TUF also incorporates a threaded inlet connection. Maximum working pressure 16.0 Bar Model (99 SSHDC) Maximum working pressure 20.0 Bar Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

see models

Marking:

VIP & WRAS on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

00/0596 (PN6), 00/0600 (PN16) – DN32-300, 00/0597 (BSP) – DN20-80, 00/0599 (PN6), 00/0601 (PN16) – DN32-300,

Approval Holder:

Valves Instruments Plus Ltd

Company Name

Valves Instruments Plus Ltd

Address

VIP House Chaddock Lane Astley Manchester

Postcode

M29 7JT

Country

United Kingdom

Phone

01942 885 700

View All Listings by this Company

Three hole, basic rough-in set with a brass body, incorporating EPDM O-ring seals. The product is supplied with a shower hose and a stainless steel braided, silicone lined flexible connecting hose. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2311033

Size:

½” BSP (M)

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R007 R010 R040

Expiry date:

30/11/2028

Model:

13 439 180

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company