Range of brass stopcocks. Compression connections, to be used with copper pipe EN1057 only. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

2310 Valves

Section Subtitle:

Stop, metal, screw down.

WRAS Approval Number:

2304375

Size:

16.20142.812.CP5R-8510 - 15MM X 25MM BRASS, 16.20142.851.CP5R-8510 - 20MM X 25MM BRASS, 16.20142.831.CP5R-8510 - 22MM X 25MM BRASS, 16.20102.840.CP5R-8510 - 25MM X 25MM BRASS, 16.20142.812.CP5R-8511 - 15MM X 25MM DZR, 16.20142.851.CP5R-8511 - 20MM X 25MM DZR, 16.20142.831.CP5R-8511 - 22MM X 25MM DZR, 16.20102.840.CP5R-8511 - 25MM X 25MM DZR.

Marking:

PFP, size, EN1213, flow arrow, date of manufacture: MM-YY, EN1254-2, size stamped on body and nut.

Installation Requirements:

R001 R120

Expiry date:

30/04/2028

Model:

10145508 - 15MM X 25MM BRASS, 10145495 - 22MM X 25MM BRASS, 10145534 - 25MM X 25MM BRASS,

Approval Holder:

Primaflow F & P

Company Name

Primaflow F & P

Address

Votec House, Hambridge Lane, Newbury

Postcode

RG14 5TN

Country

United Kingdom

View All Listings by this Company

‘Satefy group’ with a brass inlet and a DZR brass body which incorporates a lever operated spherical valve, followed by an approved check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and a plastic bodied pressure relief valve (set at 6.0 bar). The product incorporates a test point. The compression connections are for use copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

2345 Valves

Section Subtitle:

Special combination assemblies.

WRAS Approval Number:

241204702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compression

Marking:

Caleffi logo, DN15, CR mark and flow arrow cast on body. Date of manufacture WW/YY printed on body. Caleffi and Caleffi logo, flow arrow, CE marking on pressure relief valve body. 6 bar, size, EN1491 and other technical information on pressure relief valve operating gear

Installation Requirements:

R001 R008 R120

Expiry date:

31/12/2029

Model:

528716

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of UV disinfection units with stainless steel bodies. Maximum working pressure 10.3 bar. Maximum operating temperature 60°C.

Section:

2411 Disinfection Equipment

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Luminor Rainier, model, WRAS and serial number on adhesive label on body

Installation Requirements:

R001 R150 R170

Expiry date:

31/05/2029

Model:

Single Lamp UV Disinfection Units: LRx-35X Rainier - 1½” NPT (M). LRx-55X Rainier - 2” NPT (M). LRx-85X Rainier - 2” NPT (M). Double Lamp UV Disinfection Units: LRx-110X Rainier - 2½” NPT (M). LRx-140X Rainier - 3” NPT (M). LRx-175X Rainier - 4” NPT (M). X denotes a UV sensor or a glow plug and is replaced with: 5= Glow Plug & 6 = UV Sensor. X denotes the type of power cord and is replaced with: 1 = NEMA 5/15. 2 = CEE 7/7. 3 = BS1363. 4 = AS/NZ 3112. 5 = NEMA 6/15. Additional Suffixes can be used for different lamps or sensor calibrations: HW, TOC or 50.

Product Images

Approval Holder:

Luminor Environmental Inc.

Company Name

Luminor Environmental Inc.

Address

80 Southgate Drive, Unit 4, Guelph, ON Guelph

Postcode

N1G 4P5

Country

Canada,

View All Listings by this Company

'Edelpoxy FN TM 142'. Factory coloured, red coloured epoxy resin coating consisting of a base and hardener. Mix base and hardener in a 3:1 volume ratio and apply as per manufacturer's IFU 'PCC/ PC 142', dated '10.07.2018'. Cure for 7 days@30°C. For use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240555036

Expiry date:

31/05/2029

Approval Holder:

PC Chanda & Co. PVT Ltd.

Company Name

PC Chanda & Co. PVT Ltd.

Address

Ravi Auto House, 103 Park Street, 6th Floor, Kolkata 700016

Country

India

View All Listings by this Company

'LMI.Hygienic HI-Build Epoxy'. Factory applied, two- component, blue coloured epoxy coating. Mix base and hardener in a weight ratio of 100:15 and apply as per manufacturer's instructions 'LMIEP1403032', dated '22/06/2024'. Cure for 2 hours@20°C. For use with water up to 23°C. This material is only approved for the mixing & curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240555058

Expiry date:

31/05/2029

Approval Holder:

L.M.I. Ductile Iron Pipes & Fittings

Company Name

L.M.I. Ductile Iron Pipes & Fittings

Address

Alnasb, Bousher, Muscat Governorate

View All Listings by this Company