Range of brass threaded fittings,. Above ground use only. Maximum operating pressure of 16.0 bar. Maximum operating temperature of 85°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241204008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Proflex or Proflex & size on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

Proflex range: Thread Blank Cap PFB300-2 1/8"F PFB300-4 1/4"F PFB300-6 3/8"F PFB300-8 1/2"F PFB300-12 3/4"F PFB300-16 1"F PFB300-20 1-1/4"F PFB300-24 1-1/2"F PFB300-32 2" F PFB300-8WS 1/2"F PFB300-12WS 3/4"F PFB300-15 1/2"F PFB300-22 3/4"F PFB300-28 1"F PFB300-35 1-1/4"F PFB300-42 1-1/2"F PFB300-54 2"F Thread Flange Plug PFB301-2 1/8"M PFB301-4 1/4"M PFB301-6 3/8"M PFB301-8 1/2"M PFB301-12 3/4"M PFB301-16 1"M PFB301-20 1-1/4"M PFB301-24 1-1/2"M PFB301-32 2"M Thread Square Head Plug PFB301A-2 1/8"M PFB301A-4 1/4"M PFB301A-6 3/8"M PFB301A-8 1/2"M PFB301A-12 3/4"M PFB301A-16 1"M PFB301A-20 1-1/4"M PFB301A-24 1-1/2"M PFB301A-32 2"M Thread Blank Plug PFB302-2 1/8''M PFB302-4 1/4"M PFB302-6 3/8"M PFB302-8 1/2"M PFB302-12 3/4"M PFB302-16 1"M PFB302-20 1-1/4"M PFB302-24 1-1/2"M PFB302-32 2"M Thread Flange Locknut (Backnut) PFB303-2 1/8''F PFB303-4 1/4"F PFB303-6 3/8"F PFB303-8 1/2"F PFB303-12 3/4"F PFB303-16 1"F PFB303-20 1-1/4"F PFB303-24 1-1/2"F PFB303-32 2"F Thread Locknut PFB303A-2 1/8''F PFB303A-4 1/4"F PFB303A-6 3/8"F PFB303A-8 1/2"F PFB303A-12 3/4"F PFB303A-16 1"F PFB303A-20 1-1/4"F PFB303A-24 1-1/2"F PFB303A-32 2"F Thread Socket FxF PFB304-2 1/8"F PFB304-4 1/4"F PFB304-6 3/8"F PFB304-8 1/2"F PFB304-12 3/4"F PFB304-16 1"F PFB304-20 1-1/4"F PFB304-24 1-1/2"F PFB304-32 2"F Thread Octagonal Socket FxF PFB304A-2 1/8"F PFB304A-4 1/4"F PFB304A-6 3/8"F PFB304A-8 1/2"F PFB304A-12 3/4"F PFB304A-16 1"F PFB304A-20 1-1/4"F PFB304A-24 1-1/2"F PFB304A-32 2"F Thread Equal Straight Coupling F PFB305-2 1/8''F PFB305-4 1/4''F PFB305-6 3/8"F PFB305-8 1/2"F PFB305-12 3/4"F PFB305-16 1"F PFB305-20 1-1/4"F PFB305-24 1-1/2"F PFB305-32 2"F Thread Reducing Straight Coupling PFB306-4-8 1/4"Fx1/2"F PFB306-8-6 1/2"Fx3/8"F PFB306-12-6 3/4"Fx3/8"F PFB306-12-8 3/4"Fx1/2"F PFB306-12-24 3/4''Fx1-1/2''F PFB306-12-32 3/4''Fx2''F PFB306-16-8 1"Fx1/2"F PFB306-16-12 1"Fx3/4"F PFB306-20-16 1-1/4"Fx1"F PFB306-24-16 1-1/2"Fx1"F PFB306-24-20 1-1/2"Fx1-1/4"F PFB306-32-16 2"Fx1"F PFB306-32-20 2"Fx1-1/4"F PFB306-32-24 2"Fx1-1/2"F Thread Barrel Nipple PFB307-2 1/8"M PFB307-4 1/4"M PFB307-6 3/8"M PFB307-8 1/2"M PFB307-12 3/4"M PFB307-16 1"M PFB307-20 1-1/4"M PFB307-24 1-1/2"M PFB307-32 2''M Thread Running Nipple PFB308-2 1/8"M PFB308-4 1/4"M PFB308-6 3/8"M PFB308-8 1/2"M PFB308-12 3/4"M PFB308-16 1"M Thread Running Taper Nipple PFB308T-2 1/8"M PFB308T-4 1/4"M PFB308T-6 3/8"M PFB308T-8 1/2"M PFB308T-12 3/4"M PFB308T-16 1"M Thread Running Long Nipple MxL PFB308L-6-100 3/8"Mx100mm PFB308L-8-25 1/2"Mx25mm PFB308L-8-45 1/2"Mx45mm PFB308L-8-3IN 1/2"Mx3'' PFB308L-8-4IN 1/2"Mx4'' PFB308L-8-100 1/2"Mx100mm PFB308L-8-6IN 1/2"Mx6'' PFB308L-12-27 3/4"Mx27mm PFB308L-12-3IN 3/4"Mx3'' PFB308L-12-4IN 3/4"Mx4'' PFB308L-12-100 3/4"Mx100mm PFB308L-12-6IN 3/4"Mx6'' PFB308L-16-31 1"Mx31mm PFB308L-16-55 1"Mx55mm PFB308L-16-3IN 1"Mx3'' PFB308L-16-100 1"Mx100mm PFB308L-16-6IN 1"Mx6'' Thread Hex Equal Nipple PFB309-2 1/8''M PFB309-4 1/4"M PFB309-6 3/8"M PFB309-8 1/2"M PFB309-12 3/4"M PFB309-16 1"M PFB309-20 1-1/4"M PFB309-24 1-1/2"M PFB309-32 2"M Thread Reducing Hex Nipple MxM PFB310-4-2 1/4''Mx1/8''M PFB310-6-2 3/8''Mx1/8''M PFB310-6-4 3/8"Mx1/4"M PFB310-8-4 1/2"Mx1/4"M PFB310-8-6 1/2"Mx3/8"M PFB310-12-6 3/4''Mx3/8''M PFB310-12-8 3/4"Mx1/2"M PFB310-16-8 1"Mx1/2"M PFB310-16-12 1"Mx3/4"M PFB310-20-12 1-1/4"Mx3/4"M PFB310-20-16 1-1/4"Mx1"M PFB310-24-8 1-1/2"Mx1/2''M PFB310-24-12 1-1/2"Mx3/4''M PFB310-24-16 1-1/2"Mx1"M PFB310-24-20 1-1/2"Mx1-1/4"M PFB310-32-12 2‘’Mx3/4‘’M PFB310-32-16 2"Mx1"M PFB310-32-20 2"Mx1-1/4"M PFB310-32-24 2"Mx1-1/2"M Thread Equal Adaptor (Connector) MxF PFB311-6 3/8"MxF PFB311-8 1/2"MxF PFB311-12 3/4"MxF PFB311-16 1"MxF PFB311-20 1-1/4"MxF PFB311-24 1-1/2"MxF PFB311-32 2"MxF Thread Reducing Adaptor (Connector) MxF PFB312-2-4 1/8''Mx1/4''F PFB312-2-6 1/8''Mx3/8''F PFB312-2-8 1/8''Mx1/2''F PFB312-4-6 1/4"Mx3/8"F PFB312-4-8 1/4''Mx1/2''F PFB312-4-12 1/4''Mx3/4''F PFB312-6-2 3/8''Mx1/8''F PFB312-6-4 3/8'Mx1/4'F PFB312-6-8 3/8"Mx1/2"F PFB312-6-12 3/8''Mx3/4''F PFB312-8-6 1/2"Mx3/8"F PFB312-8-12 1/2"Mx3/4"F PFB312-8-16 1/2"Mx1"F PFB312-8-20 1/2''Mx1-1/4''F PFB312-12-6 3/4''Mx3/8''F PFB312-12-8 3/4"Mx1/2"F PFB312-12-16 3/4"Mx1"F PFB312-12-20 3/4''Mx1-1/4''F PFB312-12-24 3/4''Mx1-1/2''F PFB312-12-32 3/4''Mx2''F PFB312-16-8 1''Mx1/2''F PFB312-16-12 1"Mx3/4"F PFB312-16-20 1"Mx1-1/4"F PFB312-16-24 1"Mx1-1/2"F PFB312-16-32 1"Mx2"F PFB312-20-16 1-1/4''Mx1''F PFB312-20-24 1-1/4"Mx1-1/2"F PFB312-20-32 1-1/4"Mx2"F PFB312-24-32 1-1/2"Mx2"F PFB312-32-24 2"Mx1-1/2"F Thread Bushing MxF PFB313-4-2 1/4"Mx1/8"F PFB313-6-2 3/8"Mx1/8"F PFB313-6-4 3/8"Mx1/4"F PFB313-8-2 1/2"Mx1/8"F PFB313-8-4 1/2"Mx1/4"F PFB313-8-6 1/2"Mx3/8"F PFB313-12-2 3/4"Mx1/8"F PFB313-12-4 3/4"Mx1/4"F PFB313-12-6 3/4''Mx3/8''F PFB313-12-8 3/4"Mx1/2"F PFB313-12-10 3/4"Mx5/8"F PFB313-16-6 1''Mx3/8''F PFB313-16-8 1"Mx1/2"F PFB313-16-12 1"Mx3/4"F PFB313-20-8 1-1/4"Mx1/2"F PFB313-20-12 1-1/4"Mx3/4"F PFB313-20-16 1-1/4"Mx1"F PFB313-24-8 1-1/2"Mx1/2"F PFB313-24-12 1-1/2"Mx3/4"F PFB313-24-16 1-1/2"Mx1"F PFB313-24-20 1-1/2"Mx1-1/4"F PFB313-32-8 2"Mx1/2"F PFB313-32-12 2"Mx3/4"F PFB313-32-16 2"Mx1"F PFB313-32-20 2"Mx1-1/4"F PFB313-32-24 2"Mx1-1/2"F Thread Female Equal Elbow FxF PFB314-2 1/8''F PFB314-4 1/4''F PFB314-6 3/8"F PFB314-8 1/2"F PFB314-12 3/4"F PFB314-16 1"F PFB314-20 1-1/4"F PFB314-24 1-1/2"F PFB314-32 2"F T

Thread Female Reducing Elbow FxF PFB315-12-8 3/4"Fx1/2"F PFB315-16-8 1"Fx1/2"F PFB315-20-4 1-1/4″Fx1/2″F PFB315-20-12 1-1/4″Fx3/4″F PFB315-20-16 1-1/4"Fx1"F PFB315-24-16 1-1/2"Fx1"F Thread Male Equal Elbow MxM PFB316-4 ¼”M xM PFB316-6 3/8”M xM PFB316-8 ½”M xM PFB316-12 ¾”M xM PFB316-16 1”M xM Thread Street Elbow MxF PFB317-6 3/8"M PFB317-8 1/2"MxF PFB317-12 3/4"MxF PFB317-16 1"MxF PFB317-20 1-1/4"MxF PFB317-24 1-1/2"MxF PFB317-32 2"MxF Thread Wallplate Elbow FxF PFB318-8 1/2''F xF Thread Female Equal Tee FxFxF PFB319-2 1/8"F xFxF PFB319-4 1/4"F xFxF PFB319-6 3/8"F xFxF PFB319-8 1/2"F xFxF PFB319-12 3/4"F xFxF PFB319-16 1"F xFxF PFB319-20 1-1/4"F xFxF PFB319-24 1-1/2"F xFxF PFB319-32 2"F xFxF Thread Female Reducing Tee FxFxF (LRM) PFB320-12-12-8 3/4"Fx3/4''Fx1/2"F PFB320-16-16-8 1"Fx1"Fx1/2"F PFB320-16-16-12 1"Fx1"Fx3/4"F PFB320-20-20-8 1-1/4"Fx1-1/4"Fx1/2"F PFB320-20-20-12 1-1/4"Fx1-1/4"Fx3/4"F PFB320-20-20-16 1-1/4"Fx1-1/4"Fx1"F PFB320-24-24-12 1-1/2"Fx1-1/2"Fx3/4"F PFB320-24-24-16 1-1/2"Fx1-1/2"Fx1"F PFB320-24-24-20 1-1/2"Fx1-1/2"Fx1-1/4"F PFB320-32-32-8 2"Fx2"Fx1/2"F PFB320-32-32-12 2"Fx2"Fx3/4"F PFB320-32-32-16 2"Fx2"Fx1"F PFB320-32-32-20 2"Fx2"Fx1-1/4"F Thread Male Equal Tee MxMxM PFB321-6 3/8"M xMxM PFB321-8 1/2"M xMxM PFB321-12 3/4"M xMxM PFB321-16 1"M xMxM PFB321-20 1-1/4''M xMxM PFB321-24 1-1/2''M xMxM PFB321-32 2''M xMxM Thread Male Branch Tee FxFxM PFB322-8 1/2"Fx1/2''Fx1/2''M Thread Female Cross FxFxFxF PFB323-6 3/8"F xFxFxF PFB323-8 1/2"F xFxFxF PFB323-12 3/4"F xFxFxF PFB323-16 1"F xFxFxF PFB323-20 1-1/4"F xFxFxF PFB323-24 1-1/2"F xFxFxF PFB323-32 2"F xFxFxF Thread Water Tank Connector PFB324-8 1/2''M PFB324-12 3/4''M PFB324-16 1''M PFB324-20 1-1/4''M PFB324-24 1-1/2''M PFB324-32 2''M Thread Female Straight Union FxF with O ring PFB325-8 1/2"F PFB325-12 3/4"F PFB325-16 1"F PFB325-20 1-1/4"F PFB325-24 1-1/2"F PFB325-32 2"F Thread Female Straight Union FxF without O ring PFB325A-8 ½”F PFB325A-12 ¾”F PFB325A-16 1”F PFB325A-20 1-1/4”F PFB325A-24 1-1/2”F PFB325A-32 2”F Thread Straight Union MxF with O ring PFB326-8 1/2"MxF PFB326-12 3/4"MxF PFB326-16 1"MxF PFB326-20 1-1/4"MxF PFB326-24 1-1/2"MxF PFB326-32 2"MxF Thread Straight Union MxF without O ring PFB326A-8 ½”MxF PFB326A-12 ¾”MxF PFB326A-16 1”MxF PFB326A-20 1-1/4”MxF PFB326A-24 1-1/2”MxF PFB326A-32 2”MxF Thread Elbow Union MxF PFB327-8 1/2"MxF PFB327-12 3/4"MxF PFB327-16 1"MxF PFB327-20 1-1/4"MxF PFB327-24 1-1/2''MxF PFB327-32 2'' MxF Thread Straight Union MxF PFB328-8 ½’’MxF PFB328-12 ¾’’MxF PFB328-16 1’’MxF PFB328-20 1-1/4’’MxF PFB328-24 1-1/2’’MxF PFB328-32 2’’MxF Thread Male Straight Union MxM PFB329-8 1/2''MxM PFB329-12 3/4''MxM PFB329-16 1''MxM Thread Extension MxFxL PFB332-6-15 3/8"MxFx15mm PFB332-6-30 3/8"MxFx30mm PFB332-6-50 3/8"MxFx50mm PFB332-6-100 3/8"MxFx100mm PFB332-8-10 1/2"MxFx10mm PFB332-8-15 1/2"MxFx15mm PFB332-8-20 1/2"MxFx20mm PFB332-8-25 1/2"MxFx25mm PFB332-8-30 1/2"MxFx30mm PFB332-8-35 1/2"MxFx35mm PFB332-8-40 1/2"MxFx40mm PFB332-8-50 1/2"MxFx50mm PFB332-8-60 1/2"MxFx60mm PFB332-8-70 1/2"MxFx70mm PFB332-8-75 1/2"MxFx75mm PFB332-8-80 1/2"MxFx80mm PFB332-8-90 1/2"MxFx90mm PFB332-8-100 1/2"MxFx100mm PFB332-12-10 3/4"MxFx10mm PFB332-12-15 3/4"MxFx15mm PFB332-12-20 3/4"MxFx20mm PFB332-12-25 3/4"MxFx25mm PFB332-12-30 3/4"MxFx30mm PFB332-12-40 3/4"MxFx40mm PFB332-12-50 3/4"MxFx50mm PFB332-12-60 3/4"MxFx60mm PFB332-12-70 3/4"MxFx70mm PFB332-12-80 3/4"MxFx80mm PFB332-12-90 3/4"MxFx90mm PFB332-12-100 3/4"MxFx100mm PFB332-16-10 1"MxFx10mm PFB332-16-15 1"MxFx15mm PFB332-16-20 1"MxFx20mm PFB332-16-25 1"MxFx25mm PFB332-16-30 1"MxFx30mm PFB332-16-40 1"MxFx40mm PFB332-26-50 1"MxFx50mm PFB332-26-60 1"MxFx60mm Thread Long Tap Extension MxFxL PFB332A-8-78 ½”MxFx7/8’’ PFB332A-12-78 ¾”MxFx7/8’’ Thread Extension Nipple MxMxL PFB333-8-50 1/2"MxMx50mm PFB333-8-60 1/2"MxMx60mm PFB333-8-70 1/2"MxMx70mm PFB333-8-80 1/2"MxMx80mm PFB333-8-100 1/2"MxMx100mm PFB333-8-150 1/2"MxMx150mm PFB333-8-200 1/2"MxMx200mm PFB333-8-250 1/2"MxMx250mm PFB333-12-50 3/4"MxMx50mm PFB333-12-70 3/4"MxMx70mm PFB333-12-80 3/4"MxMx80mm PFB333-12-100 3/4"MxMx100mm PFB333-12-150 3/4"MxMx150mm PFB333-12-175 3/4"MxMx175mm PFB333-12-200 3/4"MxMx200mm PFB333-12-250 3/4"MxMx250mm PFB333-16-50 1"MxMx50mm PFB333-16-60 1"MxMx60mm PFB333-16-70 1"MxMx70mm PFB333-16-80 1"MxMx80mm PFB333-16-100 1"MxMx100mm PFB333-16-150 1"MxMx150mm PFB333-16-200 1"MxMx200mm PFB333-16-250 1"MxMx250mm Thread Hex-in Reducing Plug MxF PFB334-8-6 1/2''Mx3/8''F PFB334-12-8 3/4''Mx1/2''F Thread Reducing Extension MxF PFB336-6-4 3/8''Mx1/4''F PFB336-6-8 3/8''Mx1/2''F PFB336-6-12 3/8''Mx3/4''F PFB336-8-6 1/2''Mx3/8''F PFB336-8-12 1/2''Mx3/4''F PFB336-8-14 1/2''Mx7/8''F PFB336-8-16 1/2''Mx1''F PFB336-12-6 3/4''Mx3/8F PFB336-12-8 3/4''Mx1/2''F PFB336-12-14 3/4''Mx7/8''F PFB336-12-16 3/4''Mx1''F PFB336-16-12 1''Mx3/4''F PFB336-16-20 1''Mx1-1/4''F PFB336-20-16 1-1/4M''x1''F PFB336-20-24 1-1/4M''x1-1/2''F Thread Straight Swivel Union FxF PFB337-6-4 1'F'x1-1/2''F PFB337-8-6 1-1/4''Fx2''F

Product Images

Manufacturer:

Proflex Precision Manufacturing Co. Ltd.

Company Name

Proflex Precision Manufacturing Co. Ltd.

Address

No53, Fugang Road, Shamen Town Yuhuan City Zhejiang Province

Country

China

View All Listings by this Company

“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Press-Inox range of stainless-steel crimped fittings (‘M’ crimp profile) for use with stainless steel pipe (manufactured to EN10204). For above ground use only. Maximum working pressure: 16Bar. Maximum operating temperature: 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241102057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 168.3mm (excluding 28mm). (Including 28mm from December 2024).

Marking:

PCC Logo, PI 316L, Size, Year of manufacture (YY-MM) and DVGW on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

All Models sizes are in mm are Pressfit unless specified are BSP 12000 Straight Coupling 15mm - 168,3mm 12010 Straight Male Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 66.7 x 2 1/2" 76.1 x 2 1/2" 88.9 x 3" 108 x 4" 12020 Straight Female Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 12040 Sleeve Coupling 15mm – 108mm 12070 Tap Connector 15 x 3/4" 18 x 3/4" 22 x 1" 35 x 1 1/2"12080 Male Union 15 x 1/2" 18 x 1/2" 22 x 3/4" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12100 Equal Tee 15mm - 168,3mm 12110 Reduced Tee 15mm - 168,3mm 12120 Female Tee 15mm – 108mm 12200 Bend 90° 15mm - 168,3mm 12210 Streetbend 90° 15mm - 168,3mm 12230 Bend 45° 15mm - 168,3mm 12240 Streetbend 45° 15mm - 168,3mm 1231 Male Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1232 Female Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1234 Female Wallplate 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12350 Male Bend 90° 15mm – 54mm 12360 Crossover / By-Pass Bend 15mm – 54mm 12400 Flange PN16 with pressend 22 x 1/2" 22 x 3/4" 22 x DN20 35 x DN32 42 x DN40 54 x DN50 66.7 x DN65 76.1 x DN65 76.1 x DN80 88.9 x DN80 108 x DN100 139.7 x DN125 168.3 x DN150 12410 Endcap 15mm – 108mm 12430 Male reducer 15mm - 168,3mm 12450 Insert Male Adapter 15mm – 54mm 12460 Insert Female Adapter 15mm – 54mm 12820 O-Ring 15mm - 168,3mm Models Added December 2024: 12010 Straight Male Adapter 28 x 3/4" 28 x 1" 12020 Straight Female Adapter 28 x 3/4" 28 x 1" 12070 Tap Connector 28 x 1 1/4" Male Union 28 x 1" 1231 Male Threaded Bend 90° 28 x 3/4" 28 x 1" 1232 Female Threaded Bend 90° 28 x 3/4" 28 x 1" 1234 Female Wallplate 28 x 3/4" 28 x 1" 12400 Flange PN16 with pressend 28 x 1" 28 x DN25

Product Images

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

Range of brass (CW617 or CW511L) press fit fittings (M-Type) for use with copper pipe manufactured to EN 1057. Maximum working pressure: 16 Bar. Maximum operating temperature: 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241202010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models below

Marking:

Ningbo Jintian (JT) Logo, Size and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

BP5240F Coupler: 15mm – 54mm x 1/2" BSP – 2” BSP (F). BP5243M Coupler: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP5090F Elbow: 12mm – 54mm x 3/8" BSP – 2” BSP (F). BP5092F Elbow: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP5094F Wallplate elbow: 15mm – 28mm x 1/2" BSP – 1” BSP (F). BP5130F Branch Tee: 15mm – 54mm x 15mm – 54mm x 3/8" BSP – 2” BSP (F). BP5240G Straight swivel: 15mm – 28mm x 1/2" BSP – 1 1/4” BSP (F). BP9201M Male union coupler: 12mm – 54mm x 3/8" BSP – 2” BSP (M). BP9202F Male union with Female end: 12mm – 54mm x 3/8" BSP – 2” BSP (F). BP9203PP Coupler: 12mm – 54mm. BPA9270F Female nipple: 12mm – 35mm. BPA9272M Male Nipple: 12mm – 54mm.

Product Images

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of urinal flushing mechanisms, consisting of a solenoid valve controlling the flow which is actuated via an infra-red sensor. Models are either mains or battery operated and are available in a variety of enclosure options Maximum operating pressure 8 bar. Maximum operating temperature 23°C

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

241204724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm compresion

Marking:

Flushmatic & DVS on body.

Installation Requirements:

R001 R075 R090

Expiry date:

31/12/2029

Model:

Flushmatic range: UC01-001 UC01-003 UC01-004 UC01-005 UC01-006 UC01-007 UC01-008 UC01-009 UC01-014 UC01-015 UC01-016 UC01-017 UC01-018 UC01-024

Product Images

Approval Holder:

KWC DVS Ltd.

Company Name

KWC DVS Ltd.

Address

Kemmings Close, Long Road, Paignton, Devon

Postcode

TQ4 7TW

Country

United Kingdom

Phone

01246 458 900

General Email

richard.lamb@kwc.com

View All Listings by this Company

Range of copper brazed, stainless steel heat exchangers. Available with between 4 – 70 plates (see models). Maximum working pressure: 16.0 bar. Maximum operating temperature: 99°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

SWEO and product info on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

E5T Number of plates minimum: 6 Number of plates maximum: 48 No connection type or ¾” BSP (M) E5AS Number of plates minimum: 4 Number of plates maximum: 40 No connection type or ¾” BSP (M) E5K Number of plates minimum: 8 Number of plates maximum: 40 No connection E6T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8T Number of plates minimum: 4 Number of plates maximum: 40 No connection type, ½” or ¾” BSP (M) E8AS Number of plates minimum: 4 Number of plates maximum: 46 No connection type or ¾” BSP (M) E8LAS Number of plates minimum 10 Number of plates maximum: 70 No connection, ¾” or 1” BSP (M)

Product Images

Approval Holder:

SWEP International AB

Company Name

SWEP International AB

Address

Järvgatan 3B, Box 105, 26122 Landskrona

Country

Sweden

View All Listings by this Company

Range of near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

New Lanbiao logo on label on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

51023, 51006, 51022-H, 51005-H, 51022-B, 51005-B

Product Images

Approval Holder:

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Company Name

Taizhou New Lanbiao Intelligent Technology Co.,Ltd

Address

JIAOXI INDUSTRIAL ZONE, QINGGANG, YUHUAN, TAIZHOU

Country

China

View All Listings by this Company

Range of indirect heat interface units (HIU) providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. Maximum operating pressure 10 bar (primary and DHW secondary). Maximum operating pressure 2.5 bar CH secondary Maximum operating temperature 90°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Bosch on front panel and technical info on adhesive label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2029

Model:

7-735-600-739 - Flow 8500 40, 7-735-600-740 - Flow 8500 40 H, 7-735-600-741 - Flow 8500 50, 7-735-600-742 - Flow 8500 50 H, 7-735-600-743 - Flow 8500 60, 7-735-600-744 - Flow 8500 60 H.

Product Images

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.

Marking:

Resideo & Technical information on face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of plastic pressure sensors. Maximum working pressure: 15.99 Bar. Maximum operating temperature 90.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Part number, data code (X = last digit of year & YYY = day of year) and Sensata on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

126CP3 - ¼” BSP M, 126CP4 - 3/8” BSP M, 126CP6 - 12mm OD.

Product Images

Manufacturer:

Sensata Technologies de Mexico S de RL de CV

Company Name

Sensata Technologies de Mexico S de RL de CV

Address

Av. Aguascalientes Sur #401 Ex-Ejido Ojo Caliente Aguascalientes

Postcode

20290

Country

Mexico

Phone

+52 449 910 5500

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Product Images

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

LEO on cover. LEO, model & technical information on date label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Product Images

Manufacturer:

Leo Group Pump(Zhejiang) Co., Ltd

Company Name

Leo Group Pump(Zhejiang) Co., Ltd

Address

No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

Range of pumps with stainless steel bodies. Maximum working pressure depends on model, please refer to model. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Clarke Pump, model & technical info on label.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MHS90 4M MSP490: G1” BSP F (4.3bar). MHS90 5M MSP590: G1” BSP F (5.3bar). MHS90 6M MSP690: G1” BSP F (6.4bar). MHS120 4M MSP4120: G1¼” BSP F X G1” BSP F (4.5bar). MHS120 5M MSP5120: G1¼” BSP F X G1” BSP F (5.7bar). MHS120 6M MSP6120: G1¼” BSP F X G1” BSP F (6.9 bar).

Product Images

Approval Holder:

Clarke International Limited

Company Name

Clarke International Limited

Address

Sealand House, Hemnall Street, Epping, Essex, CM16 4LG UK

View All Listings by this Company

Circulation pump with a stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Archergas, model and technical information on case. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

DHW15 Circulation Pump.

Product Images

Approval Holder:

Archergas Limited

Company Name

Archergas Limited

Address

85 Bayham Street, Camden Town

View All Listings by this Company

Range of wall or ceiling mounted shower arms, (brass bodies - various finishes). Maximum operating temperature: 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241102055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M) (Models V1620-50-IS & V1620-100-IS) ½” BSP (F) (All other models)

Marking:

SHS on fitting body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

Ceiling Tubes: V1690-A-XX V1690-B-XX V1690-C-XX V1690-D-XX V1690-E-XX Wall Mounted: V1620-A-XX V1620-B-XX V1620-C-XX V1790-A-XX V1790-B-XX V1640-XX Rough Kits: V1620-50-IS V1620-100-IS Compatible decorative Rose range: V2620-R – Fairfield, V6620-R – Style Moderne, V7620-R – Landmark, T1620-R – One Hundred Collection, T2620-R – Forme Kit Codes: Fairfield V2K620-A-XX, V2K620-B-XX, V2K620-C-XX V2K690-A-XX, V2K690-B-XX, V2K690-C-XX, V2K690-D-XX, V2K690-E-XX V2K790-A-XX V2K790-B-XX V2K640-XX Style Moderne V6K620-A-XX V6K620-B-XX V6K620-C-XX V6K690-A-XX, V6K690-B-XX, V6K690-C-XX, V6K690-D-XX, V6K690-E-XX V6K790-A-XX V6K790-B-XX V6K640-XX Landmark V7K620-A-XX, V7K620-B-XX, V7K620-C-XX V7K690-A-XX, V7K690-B-XX, V7K690-C-XX, V7K690-D-XX, V7K690-E-XX V7K790-A-XX V7K790-B-XX V7K640-XX T10K620-A-XX, T10K620-B-XX, T10K620-C-XX T10K690-A-XX, T10K690-B-XX, T10K690-C-XX, T10K690-D-XX, T10K690-E-XX T10K790-A-XX T10K790-B-XX T10K640-XX Forme T20K620-A-XX, T20K620-B-XX, T20K620-C-XX T20K690-A-XX, T20K690-B-XX, T20K690-C-XX, T20K690-D-XX, T20K690-E-XX T20K790-A-XX T20K790-B-XX T20K640-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters.

Product Images

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

View All Listings by this Company

Range of shower handsets and connection hoses (brass bodies – various finishes). The inlet incorporates an approved check valve cartridge (with plastic flow regulator) however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241104033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) & ½” BSP (F) captive nut.

Marking:

THG on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

60A/W 70/W 70R/W 71/W 66/W 67/W 60A/W Styles – BEYOND – G7A-Beaubourg ; G7B-Beaubourg à manettes ; G7C-Saint-Germain ; G7D-Saint-Germain à manettes ; A42-Pomme cristal clair satiné ; A46-Pomme cristal lustré or ; G6A-Métamorphose ; G6B-Métamorphose à manettes ; G6C-Métamorphose carbone ; G6D-Métamorphose céramique noire ; G6E-Métamorphose céramique blanche ; G7F-Bondi ; G7G-Bondi à manettes ; G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes ; G9L-SYSTEM croisillon bague à définir ; G9M-SYSTEM manette bague à définir ; U6F-Beyond Crystal - cristal clair ; U6H-Beyond Crystal - cristal rouge ; U6J-Beyond Crystal - cristal couleur champagne ; U6K-Beyond Crystal - cristal bleu BROADWAY- A04-Broadway à manettes ; A52-Broadway CHARLESTON – G08-Pompadour ; G25-1900 ; G28-1900 à manettes ; G29-Charleston ; G3M-1900 à manettes métal lisse ; G3N-Charleston à manettes métal lisse ; G75-Charleston à manettes ; G7H-Club Saint-Germain ; G7J-Club Saint-Germain à manettes, XB7-Charleston Spirit ; XC5-La Minerva Roma CUBICA – A2R-Masque de Femme lunaire ; A2S-Masque de Femme solaire ; A2T-Masque de Femme, métal gravé ; A2U-Masque de Femme, métal lisse ; A38-Niagara ; A3Z-Marina Marbre à définir ; G04-Pure ; G1T-Beluga ; G1U-Beluga à manettes ; G79-Cubica ; U5E-Ginkgo ; U5F-Vegetal DIAMANT – A2A-Métropolis cristal clair ; A2B-Métropolis cristal clair à manettes ; A2L-Métropolis cristal noir ; A2M-Métropolis cristal noir à manettes; J17-Beverley ESTRELA – U3J-Estrela ; U3K-Estrela à manettes ; U3L-Estrela inserts métal LISSE – A41-Dahlia ; A7A-Ithaque décor Or ; A7B-Ithaque décor Platine ; A7F-Marquise noir décor Or ; A7G-Marquise blanc décor Platine ; G47-Vendôme ; G4R-Hamptons ; G4S-Hamptons à manettes ; U4E-Duomo ; U4F-Duomo cristal ; U5A-Flore NERVUREE – A1J-Amboise Malachite ; A1K-Amboise Lapis Lazuli ; A1L-Amboise Jaspe rouge ; A1M-Amboise Onyx noir ; A1S-Cheverny Malachite ; A1T-Cheverny Lapis Lazuli ; A1U-Cheverny Jaspe rouge ; U5G-Moon Dragon ; U5H-Jade Dragon ; A1V-Sully Malachite ; A1W-Sully Lapis Lazuli ; A2C-Océania ; A2E-Venice ; A2F-Naïade ; A2G-Ange ; A2H-Panthère cristal clair ; A2J-Papillon ; A2K-Panthère cristal noir ; A3T-Amboise Marbre à définir ; A3V-Cheverny Marbre à définir ; A44-Ellipse ; A8L-Vogue marbre à définir ; A8M-Vogue Malachite ; A8N-Vogue Jaspe rouge ; A8P-Vogue Onyx noir ; A8R-Vogue Oeil de tigre ; A8S-Vogue Lapis Lazuli ; A9B-Jaipur cristal satiné ; A9C-Jaipur Onyx noir ; A9E-Jaipur marbre à définir ; A9F-Jaipur métal ; E53-Najem ; G14-Versailles ; G24-Amour de Trianon ; G31-Cygne ; U1A-Mandarine métal ; U1D-Mandarine cristal clair ; U1E-Mandarine cristal clair satiné ; U1K-Mandarine Cristallia Diamant ; U1S-Sully Onyx blanc ; U1T-Sully Onyx noir ; U1V-Cheverny Onyx noir ; U5D-Sun Dragon ; U5G-Moon Dragon ; U5H-Jade Dragon ; U5J-Rose ; U7A-Trocadéro Malachite ; U7B-Trocadéro Lapis Lazuli ; U7C-Trocadéro Jaspe Rouge ; U7D-Trocadéro Onyx noir ; U7E-Trocadéro Oeil de Tigre ; U8B-Monte Carlo porcelaine or ; U8C-Monte Carlo porcelaine or blanc ; U93-Malmaison métal ; U95-Malmaison Portoro PINTO – D5A-Andy ; G33-Gao ; G3R-Montaigne marbre Grand Antique ; G3S-Montaigne marbre Grand Antique à manettes ; G3T-Montaigne marbre Leonardo Grey ; G3U-Montaigne marbre Leonardo Grey à manettes ; G3V-Montaigne marbre blanc Vénus ; G3W-Montaigne marbre blanc Vénus à manettes ; G4P-Collection "O" ; G5A-Nano ; G5B-Nano à manettes ; G5D-Anoa ; G6G-New Spirit ; G6H-New Spirit à manettes ; G7E-Dean ; G7R-Yoko ; G7S-Yoko Color ; G7T-Yoko Ice ; G7U-Yoko Howlite ; G7V-Yoko Delta ; G7W-Yoko Delta Howlite ; T4P-Collection "O" Sélection ME ; U2A-Le 11 ; U2B-Le 11 à manettes ; U7G-Icon X ; U7H-Icon X à manettes ; U7J-Icon X insert métal ; U7K-Icon X à manettes insert métal ; U7L-Icon X Titane ; U7M-Icon X à manettes Titane ; U7S-Icon X Carbone or ; U7T-Icon X à manettes Carbone SO – G5E-Soho ; G7K-Soho 2023 ; G7L-SOHO METAL (nouveau design) TURBOJET – A55-Art Déco à manettes ; A56-Art Déco Cristal ; A57-Tradition ; A58-Tradition à manettes ; A59-Tradition Cristal ; G00-Tous styles YOKO – A2N-Mossi cristal clair ; A33-Bambou cristal noir ; A34-Bambou cristal Ambre ; A35-Bambou cristal clair ; A4J-Hirondelle cristal clair ; A4K-Hirondelle cristal clair décor platine ; A4L-Hirondelle cristal clair décor or ; A6A-Profil métal ; A6B-Profil métal à manettes ; A6G-Profil Lalique cristal clair ; A6H-Profil Lalique cristal clair à manettes ; A6N-Profil Onyx noir ; A6P-Profil Onyx noir à manettes ; G2H-Le 9 Howlite ; G2I-Le 9 Nero Marquina ; G2J-Faubourg porcelaine blanche à manettes ; G2K-Faubourg porcelaine blanche ; G2L-Faubourg porcelaine noire ; G2M-Faubourg porcelaine noire à manettes ; G2N-Froufrou ; G2P-Froufrou à manettes ; G2R-Frivole ; G2S-Frivole à manettes ; G2T-Faubourg métal ; G2U-Faubourg métal à manettes ; G58-Spirit à manettes ; G69-Spirit ; G7F-Bondi ; G7G-Bondi à manettes ; G8A-Les Ondes ; G8B-Les Ondes à manettes ; G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes ; U2D-INFINI porcelaine blanche ; U2E-INFINI porcelaine blanche décor platine ; U2F-INFINI porcelaine blanche décor or ; U2L-Nihal porcelaine bleue ; U2M-Nihal métal lisse ; U2N-Nihal porcelaine ivoire ; U2P-Nihal porcelaine noire ; U2R-Nihal porcelaine verte ; U2S-Nihal Porcelaine rouge ; U4A-Diplomate bagues lisses ; U4B-Diplomate bagues annelées ; U4C-Diplomate bagues torsadées ; U4D-Diplomate Royale ; U5B-Island ; U5C-Paradise ; U5K-Camélia Cristal noir ; U5L-Camélia Cristal clair ; U5N-New Island ; U5P-New Paradise ; U6A-Pétale de Cristal clair ; U6B-Pétale de Cristal bleu ; U6C-Pétale de Cristal rouge ; U6D-Pétale de Cristal noir ; U6E-Pétale de Cristal clair liseré doré ; U6M-Mille nuits Cristal clair ; U6N-Mille nuits Cristal couleur Champagne ; U6P-Mille nuits Cristal Brume ; U8D-Corvair ; U8E-Corvair à manettes ; U8F-Corvair marbre Howlite ; U8G-Corvair à manettes marbre Howlite ; U8H-Corvair marbre Portoro ; U8J-Corvair à manettes marbre Portoro ; U8K-Corvair marbre Fior di Bosco ; U8L-Corvair à manettes marbre Fior di Bosco ; U8M-Corvair pierre à définir ; U8N-Corvair à manettes pierre à définir ; XB4-Ritz Picnic ; XC4-Spa Dior Marbre à définir ZOOM – U4J-ZOOM Five ; U4K-ZOOM Seven ; U4L-ZOOM Twelve Finishes: A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D10-USA Oil-Rubbed Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; A complete code number compile three information’s, for example: A1J-A02-60A/W (SERIE-FINISH-ARTICLE). This would give you a stylish ledge mounted hand shower with 2m hose and corner bracket in Amboise Malachite style and polished chrome finish.

Product Images

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

View All Listings by this Company

Range of shower handsets and overhead showers with (plastic or chrome plated plastic bodies). Open Outlet use only Maximum operating temperature 75.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240802005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M) - All other models ½” Captive nut - G50013-2C06, G07011-2C14 and G06011-2C24

Marking:

‘Bristan’ logo on Handset or on connector of shower outlet.

Installation Requirements:

R001 R040

Expiry date:

31/08/2029

Model:

CAS HAND01 C CAS HAND02 C CAS HAND03 C CAS HAND04 C 760955CP FHC CTRD02 C S16073 Model added April 2025 S33011-2C11 BR

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Shower handset with various finishes. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240708006

Size:

See models.

Marking:

Center logo on handset

Installation Requirements:

R001 R040

Expiry date:

31/07/2029

Model:

A05049* CENTER SHOWER SET SINGLE FUNC HANDSET – ½” BSP (M)

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of shower handsets and overhead shower with various finishes. Model HS149 incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240708007

Size:

See models.

Marking:

Center logo on body

Installation Requirements:

R001 R040

Expiry date:

31/07/2029

Model:

A05045 * CENTER SINGLE FUNCTION HANDSET CHROME – ½” BSP (M) A05046* CENTER MULTI-FUNCTION HANDSET – CHROME - ½” BSP (M) A05058* CENTER SINGLE FUNCTION FIXED HEAD 70MM - ½” BSP (F) A05059* CENTER SINGLE FUNC FIXED HEAD&ARM 70MM - ½” BSP (F)

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of overhead shower outlets with (brass bodies – various finishes) incorporating stainless-steel filter washers at the inlet. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241008008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

1/2" BSP (F)

Marking:

Villeroy & Boch on body

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

A957325*

Approval Holder:

Villeroy & Boch AG

Company Name

Villeroy & Boch AG

Address

Saaruferstraße 1-3 Mettlach

Postcode

66693

Country

Germany

Phone

+49 151 16775778

General Email

Finkler.Marc@villeroy-boch.com

View All Listings by this Company