“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Press-Inox range of stainless-steel crimped fittings (‘M’ crimp profile) for use with stainless steel pipe (manufactured to EN10204). For above ground use only. Maximum working pressure: 16Bar. Maximum operating temperature: 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241102057

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 168.3mm (excluding 28mm). (Including 28mm from December 2024).

Marking:

PCC Logo, PI 316L, Size, Year of manufacture (YY-MM) and DVGW on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

All Models sizes are in mm are Pressfit unless specified are BSP 12000 Straight Coupling 15mm - 168,3mm 12010 Straight Male Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 66.7 x 2 1/2" 76.1 x 2 1/2" 88.9 x 3" 108 x 4" 12020 Straight Female Adapter 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 12040 Sleeve Coupling 15mm – 108mm 12070 Tap Connector 15 x 3/4" 18 x 3/4" 22 x 1" 35 x 1 1/2"12080 Male Union 15 x 1/2" 18 x 1/2" 22 x 3/4" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12100 Equal Tee 15mm - 168,3mm 12110 Reduced Tee 15mm - 168,3mm 12120 Female Tee 15mm – 108mm 12200 Bend 90° 15mm - 168,3mm 12210 Streetbend 90° 15mm - 168,3mm 12230 Bend 45° 15mm - 168,3mm 12240 Streetbend 45° 15mm - 168,3mm 1231 Male Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1232 Female Threaded Bend 90° 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 1234 Female Wallplate 15 x 1/2" 15 x 3/4" 18 x 1/2" 18 x 3/4" 22 x 1/2" 22 x 3/4" 22 x 1" 35 x 1" 35 x 1 1/4" 42 x 1 1/2" 54 x 2" 12350 Male Bend 90° 15mm – 54mm 12360 Crossover / By-Pass Bend 15mm – 54mm 12400 Flange PN16 with pressend 22 x 1/2" 22 x 3/4" 22 x DN20 35 x DN32 42 x DN40 54 x DN50 66.7 x DN65 76.1 x DN65 76.1 x DN80 88.9 x DN80 108 x DN100 139.7 x DN125 168.3 x DN150 12410 Endcap 15mm – 108mm 12430 Male reducer 15mm - 168,3mm 12450 Insert Male Adapter 15mm – 54mm 12460 Insert Female Adapter 15mm – 54mm 12820 O-Ring 15mm - 168,3mm Models Added December 2024: 12010 Straight Male Adapter 28 x 3/4" 28 x 1" 12020 Straight Female Adapter 28 x 3/4" 28 x 1" 12070 Tap Connector 28 x 1 1/4" Male Union 28 x 1" 1231 Male Threaded Bend 90° 28 x 3/4" 28 x 1" 1232 Female Threaded Bend 90° 28 x 3/4" 28 x 1" 1234 Female Wallplate 28 x 3/4" 28 x 1" 12400 Flange PN16 with pressend 28 x 1" 28 x DN25

Approval Holder:

PCC GmbH

Company Name

PCC GmbH

Address

Dusseldorfer Strasse 15, D-71332 Wailblingen

Country

Germany

View All Listings by this Company

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlets incorporate a spherical valve and a check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

25mm & 32mm pushfit

Marking:

Atplas logo on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2029

Model:

MB57425DU Matrix. MB5743225DU Matrix. MB5743232DU Matrix. MB57432DU Matrix. MB5743225DDCV Matrix.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201). The inlet incorporates a stop valve. Model MB77025AM Matrix Single (CV) incorporates a single check valve cartridge and model MB77025DCV Matrix Dual (DCV) incorporates two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

20mm, 25mm & 32mm pushfit

Marking:

Atplas logo on body.

Installation Requirements:

R001 R008

Expiry date:

30/11/2029

Model:

MB77025AM Matrix Single (CV) MB77025DCV Matrix Dual (DCV)

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Nova-Flo’ inline flow control device with a plastic body. The product is intended to restrict the flow of water to a bath or basin if water level reaches the overflow. Float located within the overflow pathway activate flaps on each inlet to restrict the flow prior to the taps being closed. Maximum working pressure: 12 Bar. Maximum working temperature: 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

241102710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Claims of the effectiveness of this device to restrict the water supply are made by the manufacturer and are not considered part of the approval listing.

Size:

See models below

Marking:

Nova-Flo & WRAS on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

NF3: 22MM Spigots inlet/outlet

Manufacturer:

About Time Design Ltd

Company Name

About Time Design Ltd

Address

Unit 19, Cheltenham Trade Park, Cheltenham, Gloucestershire, GL51 8LZ

View All Listings by this Company

Range of plastic pressure sensors. Maximum working pressure: 15.99 Bar. Maximum operating temperature 90.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Part number, data code (X = last digit of year & YYY = day of year) and Sensata on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

126CP3 - ¼” BSP M, 126CP4 - 3/8” BSP M, 126CP6 - 12mm OD.

Manufacturer:

Sensata Technologies de Mexico S de RL de CV

Company Name

Sensata Technologies de Mexico S de RL de CV

Address

Av. Aguascalientes Sur #401 Ex-Ejido Ojo Caliente Aguascalientes

Postcode

20290

Country

Mexico

Phone

+52 449 910 5500

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

U 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. U 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. U 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. U 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Pentax logo, model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

ULTRA S range: U X(S) - XX/Y (T) Where: U = pump type (ULTRA), X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. U 3S models: U 3S-50/2; U 3S-70/3; U 3S-90/4; U 3S-100/5; U 3S-120/6; U 3S-150/7. U 5S models: U 5S-70/2; U 5S-80/3; U 5S-120/4; U 5S-150/5; U 5S-180/6; U 5S-200/7. U 7S models: U 7S-100/2; U 7S-120/3; U 7S-180/4; U 7S-250/5; U 7S-300/6. U 9S models: U 9S-100/2; U 9S-150/3; U 9S-200/4; U 9S-250/5. U 3S models: U 3S-50/2 T; U 3S-70/3 T; U 3S-90/4 T; U 3S-100/5 T; U 3S-120/6 T; U 3S-150/7 T. U 5S models: U 5S-70/2 T; U 5S-80/3 T; U 5S-120/4 T; U 5S-150/5 T; U 5S-180/6 T; U 5S-200/7 T. U 7S models: U 7S-100/2 T; U 7S-120/3 T; U 7S-180/4 T; U 7S-250/5 T; U 7S-300/6 T; U 7S-350/7 T. U 9S models: U 9S-100/2 T; U 9S-150/3 T; U 9S-200/4 T; U 9S-250/5 T. U 18S models: U 18S-180/2 T; U 18S-250/3 T; U 18S-400/4 T.

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of vertical (CVM) or horizontal (CHM) multistage pumps with stainless-steel bodies and stainless-steel impellers, intermediate chambers, shaft and outer sleeve and EPDM seals. Maximum working pressure: 25 Bar. Maximum working temperature: 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models below.

Marking:

Groundfos Logo, D.O.M (YYYY.MM.DD), series number, max temp, max pressure and other information on data plate on body. Flow arrow on body

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CV(H)M 4: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN20. CV(H)M 5: 2 to 12 stages: Suction flange – DN50, Discharge flange – DN40. CV(H)M 6: 2 to 11 stages: Suction flange – DN65, Discharge flange – DN40. CV(H)M 10: 2 to 10 stages: Suction flange – DN100, Discharge flange – DN80.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

LEO on cover. LEO, model & technical information on date label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Manufacturer:

Leo Group Pump(Zhejiang) Co., Ltd

Company Name

Leo Group Pump(Zhejiang) Co., Ltd

Address

No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

Range of pumps with stainless steel bodies. Maximum working pressure depends on model, please refer to model. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Clarke Pump, model & technical info on label.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MHS90 4M MSP490: G1” BSP F (4.3bar). MHS90 5M MSP590: G1” BSP F (5.3bar). MHS90 6M MSP690: G1” BSP F (6.4bar). MHS120 4M MSP4120: G1¼” BSP F X G1” BSP F (4.5bar). MHS120 5M MSP5120: G1¼” BSP F X G1” BSP F (5.7bar). MHS120 6M MSP6120: G1¼” BSP F X G1” BSP F (6.9 bar).

Approval Holder:

Clarke International Limited

Company Name

Clarke International Limited

Address

Sealand House, Hemnall Street, Epping, Essex, CM16 4LG UK

View All Listings by this Company