Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

2111377

Size:

3/8” BSP

Marking:

CLEARWATER on front of heater Model and other tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

2.4L,1500KW： CWT124T CWT024T CWT023T 4L,2300KW： CWT140T

Approval Holder:

Clearwater Products Ltd

Company Name

Clearwater Products Ltd

Address

Unit 5603 Shannon Place Tewkesbury Place

Postcode

GL20 8SL

View All Listings by this Company

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:

1390 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, open outlet.

WRAS Approval Number:

2111379

Size:

3/8” BSP

Marking:

HC DRINK (COMPANY BRAND) ON FRONT OF BODY model and other tech info on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

2.4L,1500KW： LS5001351-11, LS5001351-12, LS5001351-21, LS5001351-22, LS5001352-11, LS5001352-12, LS5001352-21, LS5001352-22, LS5001353-11, LS5001353-12, LS5001353-21, LS5001353-22, LS5001354-12, LS5001354-32, LS5001354-22, LS5001354-42, LS5001355-11, LS5001355-12, LS5001355-21, LS5001355-22, LS5001357-11, LS5001357-12, LS5001357-21, LS5001357-22, LS5001358, LS5001361, LS5001362, LS5001363, LS5001364, LS5001365, LS5001366, LS5001367, LS5001368. 4L,2300KW： LS5001371, LS5001374, LS5001372-01, LS5001372-02, LS5001372-03, LS5001372-04, LS5001376-01, LS5001376-02, LS5001376-03, LS5001377-01, LS5001377-02, LS5001377-03, LS5001377-04, LS5001373, LS5001375.

Approval Holder:

XIAMEN IWATER TECHNOLOGY CO.,LTD.

Company Name

XIAMEN IWATER TECHNOLOGY CO.,LTD.

Address

Unit 201,Building #5 Haiyi Industrial Park,No.7,Kengping Road,Jimei District ,Xiamen

Country

China

View All Listings by this Company

Greenstar Heatslave II range of floor standing oil-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, which incorporates an expansion vessel and pressure relief valve set at 3.0 bar. The cold water inlet incorporates a screwdriver operated spherical valve followed by a plastic flow regulator inserted within the pipework. Maximum working pressure: Primary circuit 2.5 bar. Secondary circuit 10.0 bar. Maximum operating temperature 82°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2111364

Note:

Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999. R430 applies to the EXT models only.

Size:

Primary: 28mm copper tail (25/32 models), 22mm copper tail (all other models). Secondary: 15mm inlet x 22mm copper tail outlet.

Marking:

Worcester (brand of Bosch Thermotechnology Ltd) and Worcester logo on front casing. Data label, Worcester and technical information on inside cover.

Installation Requirements:

R001 R140 R360 R430

Expiry date:

30/11/2026

Model:

7 731 600 165 Greenstar Heatslave II 12/18 ErP+, 7 731 600 166 Greenstar Heatslave II 18/25 ErP+, 7 731 600 167 Greenstar Heatslave II 25/32 ErP+, 7 731 600 168 Greenstar Heatslave II EXT 12/18 ErP+, 7 731 600 169 Greenstar Heatslave II EXT 18/25 ErP+, 7 731 600 170 Greenstar Heatslave II EXT 25/32 ErP+, 7 731 600 260 Greenstar Heatslave II 12/18 2022+, 7 731 600 261 Greenstar Heatslave II 18/25 2022+, 7 731 600 262 Greenstar Heatslave II 25/32 2022+, 7 731 600 263 Greenstar Heatslave II EXT 12/18 2022+, 7 731 600 264 Greenstar Heatslave II EXT 18/25 2022+, 7 731 600 265 Greenstar Heatslave II EXT 25/32 2022+.

Approval Holder:

Worcester Bosch

Company Name

Worcester Bosch

Address

Cotswold Way Warndon Worcester

Postcode

WR4 9SW

Country

United Kingdom

Phone

+44 1905 752761

General Email

ian.sharp@uk.bosch.com

View All Listings by this Company

Manufacturer:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

General Email

View All Listings by this Company

(Jet) range of water meters with either ductile iron (171259 & 171279 models) or brass (all other models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET & technical info on dial. Flow arrow & size on body.

Installation Requirements:

R001 R120

Expiry date:

31/12/2026

Model:

171243, 171253 & 171273 – ¾” BSP (M). 171244, 171254 & 171274 – 1” BSP (M). 171255, 171275 & 171256 – 1 ¼” BSP (M). 171256 & 171276 – 1 ½” BSP (M). 171257 & 171277 – 2” BSP (M). 171258 & 171278 – 2 ½” BSP (M). 171259 & 171279 – DN50 flange.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET, Wolseley & Company details, WRAS approved and other technical information on dial.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

171260 & 171280 – DN50 171261 & 171281 – DN65 171262 & 171282 – DN80 171263 & 171283 – DN100 171264 & 171284 – DN125 171265 & 171285 – DN150 171266 & 171286 – DN200

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Union ball, non-return valve with a plastic PVC body. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2112012

Note:

Does not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. For this purpose reference should not be made to `Backflow Prevention Devices`.

Size:

20mm (F) solvent cement connection

Marking:

Company logo (ERA), PN and size on body

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

UBC02 20mm

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

‘ECOCIRC XL N’ & ‘ECOCIRC XL PLUS N’ range of circulation pumps with stainless steel bodies, plastic impellers, and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2112045

Size:

1½”-2” BSP (M). DN32-65 flanged.

Marking:

Lowara (brand of Xylem) and Lowara logo, manufacturer name (xylem brand) and technical information on adhesive label on top of pump.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

ECOCIRC-XL N X1-X2 X3 X4 & ECOCIRC-XL PLUS N X1-X2 X3 X4. Where: ECOCIRC XL = series name. PLUS = with communication capabilities. N = stainless steel. X1 = port nominal diameter in mm (25 or 32 threaded models, where 25 = 1½” BSP (M), 32 = 2” BSP (M), 32-65 on flanged models). X2 = maximum head in m x 10. X3 = maximum flow - low flow versions - ‘empty’ = standard version. X4 = flange type - F = flanged, ‘empty’ = threaded BSP (M). Examples: ECOCIRC-XL N 25-40 & ECOCIRC XL PLUS N 65-120F.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Manufacturer:

Xylem Service Hungary Kft.

Company Name

Xylem Service Hungary Kft.

Address

Külso-Kátai út. 41 HU-2700 Cegléd

Phone

+36-53-510502

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110066

Size:

EV1-EV3 & 1VR-3VR models - F (round flange) versions: DN25. EV6-EV20 & 6VR-20VR models - F (round flange) versions: DN32-50. EV1-EV20 & 1VR-20VR models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Franklin Electric, model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

EV and VR ranges. Code example (EV range): EV 20 /15 A B C D E F G H J K L M N PMP/A. Where: EV = Pump model EV (EV = E-Tech “brand”). 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version (EV1-EV20 & 1VR-20VR versions only). J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Code example (VR range): 3 VR0700 A B C X-XXXX. Where: 3 = Rated flow [m³/h] (varies: 1-20). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "H" - (AISI304/EN 1.4301); "N" (AISI316/EN 1.4401). B = Flange type: "F" - round; "T" - oval; "V" - Grooved (Victaullic); "C" - clamp. C = Mechanical Seal: “1” - QBE; “2” - QQE. X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): EV1/1VR: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); EV3/3VR: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV6/6VR: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV10/10VR: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); EV15/15VR: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); EV20/20VR: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of filter type fixed ‘shower’ outlets and shower handsets with plastic bodies. Maximum operating temperature 45°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106051

Note:

Open outlet use only.

Size:

10.90mm Spigot, 18.42mm Spigot or ½” BSP (M)

Marking:

Delabie, CE mark and product info on adhesive label on body.

Installation Requirements:

R001 R040 R120 R150 R170

Expiry date:

30/06/2026

Model:

SHOWER HANDSETS: 20261 & 30261 FIXED SHOWER OUTLETS: 20250, 20251, 30250 & 30251

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of filter type fixed ‘shower’ outlets and shower handsets with plastic bodies. Maximum operating temperature 45°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2106052

Note:

Open outlet use only.

Size:

10.90mm Spigot, 18.42mm Spigot or ½” BSP (M)

Marking:

Delabie, CE mark and product info on adhesive label on body.

Installation Requirements:

R001 R040 R120 R150 R170

Expiry date:

30/06/2026

Model:

SHOWER 20361, 30361, 20461 & 30461 FIXED SHOWER OUTLETS: 20350, 30350, 20351, 30351, 20450, 30450, 20451 & 30451

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company