Range of copper capillary, bronze or brass end feed fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 99°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206359

Size:

See models

Marking:

FA.1512 and FA.2234 models only: Flowflex logo and 1254 on body. All other models: Flowflex logo, size and EN1254 on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Model: Bronze fittings: 4090G.15X1/2: End Feed Female Elbow 15mm x ½”, 4090G.22X1/2: End Feed Female Elbow 22mm x ½”, 4090G.22X3/4: End Feed Female Elbow 22mm x ¾”, 4090G.28X1: End Feed Female Elbow 28mm x 1", 4090G.35X1.1/4: End Feed Female Elbow 35mm x 1 ¼”, 4090G.42X1.1/2: End Feed Female Elbow 42mm x 1 ½”, 4090G.54X2: End Feed Female Elbow 54mm x 2". 4092G.15X1/2: End Feed Male Taper Elbow 15mm x ½”, 4092G.22X3/4: End Feed Male Taper Elbow 22mm x ¾”, 4092G.28X1: End Feed Male Taper Elbow 28mm x 1". 4130G.15X1/2X15: End Feed Female Branch Tee 15 x ½” x 15mm, 4130G.22X1/2X22: End Feed Female Branch Tee 22 x ½” x 22mm, 4130G.22X3/4X22: End Feed Female Branch Tee 22 x ¾” x 22mm, 4130G.28X1/2X28: End Feed Female Branch Tee 28 x ½” x 28mm. 4243G.15X1/2: End Feed Male Taper Adaptor 15mm x ½”, 4243G.15X3/8: End Feed Male Taper Adaptor 15mm x ⅜”, 4243G.15X3/4: End Feed Male Taper Adaptor 15mm x ¾”, 4243G.22X1/2: End Feed Male Taper Adaptor 22mm x ½”, 4243G.22X3/4: End Feed Male Taper Adaptor 22mm x ¾”, 4243G.22X1: End Feed Male Taper Adaptor 22mm x 1", 4243G.28X1: End Feed Male Taper Adaptor 28mm x 1", 4243G.35X1: End Feed Male Taper Adaptor 35mm x 1", 4243G.35X1.1/4: End Feed Male Taper Adaptor 35mm x 1 ¼”, 4243G.42X1.1/2: End Feed Male Taper Adaptor 42mm x 1 ½”, 4243G.54X2: End Feed Male Taper Adaptor 54mm x 2", 4270G.15X1/2: End Feed Female Adaptor 15mm x ½”. 4270G.15X3/8: End Feed Female Adaptor 15mm x ⅜”, 4270G.15X3/4: End Feed Female Adaptor 15mm x ¾”, 4270G.22X1/2: End Feed Female Adaptor 22mm x ½”, 4270G.22X3/4: End Feed Female Adaptor 22mm x ¾”, 4270G.22X1: End Feed Female Adaptor 22mm x 1", 4270G.28X1: End Feed Female Adaptor 28mm x 1", 4270G.35X1: End Feed Female Adaptor 35mm x 1", 4270G.35X1.1/4: End Feed Female Adaptor 35mm x 1 ¼”, 4270G.42X1.1/2: End Feed Female Adaptor 42mm x 1 ½”, 4270G.54X2: End Feed Female Adaptor 54mm x 2". Copper body/Bronze pipe socket fittings: 4341G.15X1/2: End Feed Male Union 15mm x ½”, 4341G.22X3/4: End Feed Male Union 22mm x ¾”, 4341G.28X1: End Feed Male Union 28mm x 1", 4341G.35X1.1/4: End Feed Male Union 35mm x 1 ¼”, 4341G.42X1.1/2: End Feed Male Union 42mm x 1 ½”, 4341G.54X2: End Feed Male Union 54mm x 2". Copper fittings: 5040.1: End Feed 45 Deg Street Elbow 10mm, 5040.12: End Feed 45 Deg Street Elbow 12mm, 5040.15: End Feed 45 Deg Street Elbow 15mm, 5040.22: End Feed 45 Deg Street Elbow 22mm, 5040.28: End Feed 45 Deg Street Elbow 28mm, 5040.35: End Feed 45 Deg Street Elbow 35mm, 5040.42: End Feed 45 Deg Street Elbow 42mm, 5040.54: End Feed 45 Deg Street Elbow 54mm. 5041.12: End Feed 45 Deg Elbow 12mm, 5041.15: End Feed 45 Deg Elbow 15mm, 5041.22: End Feed 45 Deg Elbow 22mm, 5041.28: End Feed 45 Deg Elbow 28mm, 5041.35: End Feed 45 Deg Elbow 35mm, 5041.42: End Feed 45 Deg Elbow 42mm, 5041.54: End Feed 45 Deg Elbow 54mm. 5085.15: End Feed Full Crossover 15mm, 5085.22: End Feed Full Crossover 22mm. 5086.15: End Feed Part Crossover 15mm, 5086.22: End Feed Part Crossover 22mm. 5090.08: End Feed Equal Elbow 8mm, 5090.10: End Feed Equal Elbow 10mm, 5090.12: End Feed Equal Elbow 12mm, 5090.15: End Feed Equal Elbow 15mm, 5090.22: End Feed Equal Elbow 22mm, 5090.28: End Feed Equal Elbow 28mm, 5090.35: End Feed Equal Elbow 35mm, 5090.42: End Feed Equal Elbow 42mm, 5090.54: End Feed Equal Elbow 54mm. 5092.10: End Feed Street Elbow 10mm, 5092.15: End Feed Street Elbow 15mm, 5092.22: End Feed Street Elbow 22mm, 5092.28: End Feed Street Elbow 28mm, 5092.35: End Feed Street Elbow 35mm, 5092.42: End Feed Street Elbow 42mm, 5092.54: End Feed Street Elbow 54mm. 5130.08: End Feed Equal Tee 8mm, 5130.10: End Feed Equal Tee 10mm, 5130.12: End Feed Equal Tee 12mm, 5130.15: End Feed Equal Tee 15mm, 5130.22: End Feed Equal Tee 22mm, 5130.28: End Feed Equal Tee 28mm, 5130.35: End Feed Equal Tee 35mm, 5130.42: End Feed Equal Tee 42mm, 5130.54: End Feed Equal Tee 54mm. 5130R.152215: End Feed Reduced Both Ends 15 x 22 x 15mm, 5130R.222822: End Feed Reduced Both Ends 22 x 28 x 22mm, 5130R.283528: End Feed Reduced Both Ends 28 x 35 x 28mm, 5130R.151212: End Feed Reduced Branch and End Tee 15 x 12 x 12mm, 5130R.221515: End Feed Reduced Branch and End Tee 22 x 15 x 15mm, 5130R.281515: End Feed Reduced Branch and End Tee 28 x 15 x 15mm, 5130R.281522: End Feed Reduced Branch and End Tee 28 x 22 x 15mm, 5130R.282215: End Feed Reduced Branch and End Tee 28 x 15 x 22mm, 5130R.282222: End Feed Reduced Branch and End Tee 28 x 22 x 22mm, 5130R.352222: End Feed Reduced Branch and End Tee 35 x 22 x 22mm, 5130R.352828: End Feed Reduced Branch and End Tee 35 x 28 x 28mm, 5130R.423535: End Feed Reduced Branch and End Tee 42 x 35 x 35mm, 5130R.544242: End Feed Reduced Branch and End Tee 54 x 42 x 42mm, 5130R.121012: End Feed Reduced Branch Tee 12 x 10 x 12mm, 5130R.151015: End Feed Reduced Branch Tee 15 x 15 x 10mm, 5130R.151215: End Feed Reduced Branch Tee 15 x 15 x 12mm, 5130R.221022: End Feed Reduced Branch Tee 22 x 10 x 22mm, 5130R.221522: End Feed Reduced Branch Tee 22 x 15 x 22mm, 5130R.281528: End Feed Reduced Branch Tee 28 x 15 x 28mm, 5130R.282228: End Feed Reduced Branch Tee 28 x 22 x 28mm, 5130R.351535: End Feed Reduced Branch Tee 35 x 15 x 35mm, 5130R.352235: End Feed Reduced Branch Tee 35 x 22 x 35mm, 5130R.352835: End Feed Reduced Branch Tee 35 x 28 x 35mm, 5130R.421542: End Feed Reduced Branch Tee 42 x 15 x 42mm, 5130R.422242: End Feed Reduced Branch Tee 42 x 22 x 42mm, 5130R.422842: End Feed Reduced Branch Tee 42 x 28 x 42mm, 5130R.423542: End Feed Reduced Branch Tee 42 x 35 x 42mm, 5130R.541554: End Feed Reduced Branch Tee 54 x 15 x 54mm, 5130R.542254: End Feed Reduced Branch Tee 54 x 22 x 54mm, 5130R.542854: End Feed Reduced Branch Tee 54 x 28 x 54mm, 5130R.543554: End Feed Reduced Branch Tee 54 x 35 x 54mm, 5130R.544254: End Feed Reduced Branch Tee 54 x 42 x 54mm, 5130R.121210: End Feed Reduced End Tee 12 x 10 x 12mm, 5130R.151510: End Feed Reduced End Tee 15 x 10 x 15mm, 5130R.222215: End Feed Reduced End Tee 22 x 15 x 22mm, 5130R.282815: End Feed Reduced End Tee 28 x 15 x 28mm, 5130R.282822: End Feed Reduced End Tee 28 x 22 x 28mm, 5130R.353515: End Feed Reduced End Tee 35 x 15 x 35mm, 5130R.353522: End Feed Reduced End Tee 35 x 22 x 35mm, 5130R.353528: End Feed Reduced End Tee 35 x 28 x 35mm, 5130R.424235: End Feed Reduced End Tee 42 x 35 x 42mm, 5130R.545442: End Feed Reduced End Tee 54 x 42 x 54mm. 5240.1008: End Feed Reducing Coupling 10 x 8mm, 5240.1508: End Feed Reducing Coupling 15 x 8mm, 5240.1510: End Feed Reducing Coupling 15 x 10mm, 5240.1512: End Feed Reducing Coupling 15 x 12mm, 5240.2215: End Feed Reducing Coupling 22 x 15mm, 5240.2815: End Feed Reducing Coupling 28 x 15mm, 5240.2822: End Feed Reducing Coupling 28 x 22mm, 5240.3522: End Feed Reducing Coupling 35 x 22mm, 5240.3528: End Feed Reducing Coupling 35 x 28mm, 5240.4222: End Feed Reducing Coupling 42 x 22mm, 5240.4228: End Feed Reducing Coupling 42 x 28mm, 5240.4235: End Feed Reducing Coupling 42 x 35mm, 5240.5422: End Feed Reducing Coupling 54 x 22mm, 5240.5428: End Feed Reducing Coupling 54 x 28mm, 5240.5435: End Feed Reducing Coupling 54 x 35mm, 5240.5442: End Feed Reducing Coupling 54 x 42mm. 5243.1008: End Feed Fitting Reducer 10 x 8mm, 5243.1210: End Feed Fitting Reducer 12 x 10mm, 5243.1508: End Feed Fitting Reducer 15 x 8mm, 5243.1510: End Feed Fitting Reducer 15 x 10mm, 5243.1512: End Feed Fitting Reducer 15 x 12mm, 5243.2212: End Feed Fitting Reducer 22 x 12mm, 5243.2215: End Feed Fitting Reducer 22 x 15mm, 5243.2812: End Feed Fitting Reducer 28 x 12mm, 5243.2815: End Feed Fitting Reducer 28 x 15mm, 5243.2822: End Feed Fitting Reducer 28 x 22mm, 5243.3515: End Feed Fitting Reducer 35 x 15mm, 5243.3522: End Feed Fitting Reducer 35 x 22mm, 5243.3528: End Feed Fitting Reducer 35 x 28mm, 5243.4215: End Feed Fitting Reducer 42 x 15mm, 5243.4222: End Feed Fitting Reducer 42 x 22mm, 5243.4228: End Feed Fitting Reducer 42 x 28mm, 5243.4235: End Feed Fitting Reducer 42 x 35mm, 5243.5415: End Feed Fitting Reducer 54 x 15mm, 5243.5422: End Feed Fitting Reducer 54 x 22mm, 5243.5428: End Feed Fitting Reducer 54 x 28mm, 5243.5435: End Feed Fitting Reducer 54 x 35mm, 5243.5442: End Feed Fitting Reducer 54 x 42mm. 5270.08: End Feed Straight Coupling 8mm, 5270.10: End Feed Straight Coupling 10mm, 5270.12: End Feed Straight Coupling 12mm, 5270.15: End Feed Straight Coupling 15mm, 5270.22: End Feed Straight Coupling 22mm, 5270.28: End Feed Straight Coupling 28mm, 5270.35: End Feed Straight Coupling 35mm, 5270.42: End Feed Straight Coupling 42mm, 5270.54: End Feed Straight Coupling 54mm. 5301.08: End Feed Stop End 8mm, 5301.10: End Feed Stop End 10mm, 5301.12: End Feed Stop End 12mm, 5301.15: End Feed Stop End 15mm, 5301.22: End Feed Stop End 22mm, 5301.28: End Feed Stop End 28mm, 5301.35: End Feed Stop End 35mm, 5301.42: End Feed Stop End 42mm, 5301.54: End Feed Stop End 54mm. C803SFEF.1: End Feed Bent Tap Connector 15mm x ½”, C803SFEF.2: End Feed Bent Tap Connector 22mm x ¾”. C805SCEF.4: End Feed Bent Cylinder Union 22mm x 1". C901EF.245: End Feed Metric Imperial Coupling 15mm x ½”, C901EF.25: End Feed Metric Imperial Coupling 22mm x ¾”, C901EF.26: End Feed Metric Imperial Coupling 28mm x 1", C901EF.27: End Feed Metric Imperial Coupling 35mm x 1 ¼”. C903SFEF.1: End Feed Straight Tap Connector 15mm x ½”, C903SFEF.2: End Feed Straight Tap Connector 15mm x ¾”, C903SFEF.3: End Feed Straight Tap Connector 22mm x ¾”. C904LEF.17: End Feed Long Fitting Reducer 15 x 8mm, C904LEF.18: End Feed Long Fitting Reducer 15 x 10mm. C905SCEF.4: End Feed Straight Cylinder Union 22mm x 1", C905SCEF.5: End Feed Straight Cylinder Union 28mm x 1". C906EF.05: End Feed Slip Coupling 15mm, C906EF.08: End Feed Slip Coupling 22mm, C906EF.09: End Feed Slip Coupling 28mm, C906EF.10: End Feed Slip Coupling 35mm. P803WPEF.2: End Feed Wallplate Elbow 15mm x ½”, P803WPEF.5: End Feed Wallplate Elbow 22mm x ¾”. Brass fittings: FA.1512: End Feed Female Adaptor 15mm x ½”, FA.2234: End Feed Female Adaptor 22mm x ¾”, FA.281: End Feed Female Adaptor 28mm x 1".

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of stainless-steel plate heat exchangers. Maximum operating pressures - primary circuit: 3.0 bar, secondary circuit (DHW): 10.0.bar. Maximum working temperature 80°C.

Section:

1350 Heat Exchangers

Size:

Ø 15.6mm holes on inlets and outlets

Marking:

Condevo, model name, date of manufacture (DDMMYY) on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Models added January 2024: Type ‘H’ range of Heat Exchangers: PPAAFHBCDE Where: PP = Product plates, AA = Number of plates in multiples of 2, 8 plates and also ranging from 36 to 44 plates, FH = Model of plates and flow, B = Material type of exchange plates - 4 = AISI304L or 6 = AISI316L, C = Coupling plate - T or R to denote hole distance option, DE = Configuration - position of studs and/or position of label (indicates configuration: progressive) - can be any 2 digit number or alphanumeric combination.

Approval Holder:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Manufacturer:

Condevo SpA

Company Name

Condevo SpA

Address

Via Luna, Z.A. 26866 Marudo (LO) Italy

View All Listings by this Company

Range of 4 or 6 port manifolds with or without water meter manifolds (see model), all with gunmetal bodies. Models with a water meter manifold incorporate a quarter turn stop valve or screw down stop valve (see model), and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

1 ½” BSP (F) inlet connection.

Marking:

Ebco (brand of Talis UK) and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R008 R120

Expiry date:

30/06/2027

Model:

4 Port manifold: MANI4. 4 Port manifold with meter manifold connection tails (only): MANI43, MANI44. 4 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI401, MANI402, MANI403, MANI410, MANI411, MANI420. 4 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI451, MANI452. 6 Port manifold: MANI6. 6 Port manifold with meter manifold connection tails (only): MANI63, MANI64. 6 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI601, MANI602, MANI603, MANI610, MANI611. 6 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI651.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of click type pop-up wastes with brass bodies. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2207708

Note:

Open outlet use only

Size:

1 ¼” BSP (M)

Marking:

Lota on body

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

62531-00-0A 60144-00-01 60144-00-00 Model added October 2023 60144-00-03X

Approval Holder:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Manufacturer:

Xiamen Lota International Co., Ltd.

Company Name

Xiamen Lota International Co., Ltd.

Address

No. 61 Xing Nan Road Jimei District Xiamen

Postcode

361022

Country

China

General Email

liwenjuan@lota.com.cn

View All Listings by this Company

Range of single and twin line shower booster pumps with plastic bodies, plastic impellors, stainless steel motor, NBR ‘O’-rings and EPDM seals. Each suction port incorporates a combined EPDM washer and stainless steel strainer. Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205308

Size:

Stainless-steel braided EPDM lined flexible hose assemblies with 15mm pushfit (inlet and outlets) x ¾” BSP captive nut end connections (to pump).

Marking:

Stuart Turner, Stuart turner logo, serial number and other technical information on advesvie label on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2027

Model:

Showermate TP S1.5 bar Twin (49084), Suregraft By Stuart Turner S1.5 bar twin (44837), Techflo TP S1.5 bar Twin (49087), Showermate TP S2.0 bar Twin (49085), Suregraft By Stuart Turner S2.0 bar twin (44838), Techflo TP S2.0 bar Twin (49088), Showermate TP S2.0 bar Single (49086), Techflo TP S2.0 bar Single (49089).

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110123

Size:

TPX1-TPX3 models - F (round flange) versions: DN25. TPX5-TPX20 models - F (round flange) versions: DN32-50. TPX1-TPX20 models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Dutypoint, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

TPX1, TPX3, TPX5, TPX10, TPX15 & TPX20 Range of vertical multistage pumps Code example (TPX range): TPX 20 /15 A B C D E F G H J K L M N PMP/A. Where: TPX = Pump model TPX. 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version. J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): TPX1: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); TPX3: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX5: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); TPX10: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); TPX15: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); TPX20: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2206044

Size:

SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.

Marking:

Ebara, model, CE and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2027

Model:

3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Overhead shower outlets with brass bodies (various finishes), incorporating EPDM O rings. Maximum working pressure: Open outlet Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2210048

Size:

½” BSP (M)

Marking:

Hansgrohe on wall bracket

Installation Requirements:

R001 R040

Expiry date:

31/10/2027

Model:

26 442 xxx 26 443 xxx XXX denotes to finish: available in -000 (Chrome) and customized finishes: -020 PVD polished chrome -260 PVD brushed chrome -830 PVD polished nickel -820 PVD brushed nickel -990 PVD polished gold optic -250 PVD brushed gold optic -300 PVD polished red gold -310 PVD brushed red gold -130 PVD polished bronze -140 PVD brushed bronze -330 PVD polished black chrome -340 PVD brushed black chrome -930 PVD polished brass -950 PVD brushed brass -800 PVD stainless steel optic

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wholesome-water nickel plated brass manifolds for use with ‘Emmeti Gerpex RA’ Pexb/Al/Pexb Multilayer pipe and ‘Emmeti Alpert’ PERT/AL/PERT Multilayer Pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C. Range of closed circuit use nickel plated brass manifolds for use with ‘JG Speedfit Layflat Polybutylene Barrier Pipe (models 10BPB & 15BPB)’. Maximum working pressure 3.0 bar. Maximum operating temperature 92°C.

Section:

1950 Manifolds

Section Subtitle:

Metal.

WRAS Approval Number:

2207314

Note:

R200 (closed circuit use only) applies to the manifolds and RWC Topsan, Topway, Multiplex and Modular pipes.

Size:

Please refer to model.

Marking:

Emmeti or Emmeti Logo on manifold body. Emmeti and date (WWYY) on nut

Installation Requirements:

R001 R200

Expiry date:

31/07/2027

Model:

01282050 FJ301282050I0020 3/4" 2-WAY TOPSAN 24X19 01282052 FJ301282052I0020 3/4" 3-WAY TOPSAN 24X19 01282054 FJ301282054I0020 3/4" 4-WAY TOPSAN 24X19 01282056 FJ301282056I0020 3/4" 5-WAY TOPSAN 24X19 01282058 FJ301282058I0020 3/4" 6-WAY TOPSAN 24X19 01282060 FJ301282060I0020 3/4" 7-WAY TOPSAN 24X19 01282062 FJ301282062I0020 3/4" 8-WAY TOPSAN 24X19 01282064 FJ301282064I0020 3/4" 9-WAY TOPSAN 24X19 01282066 FJ301282066I0020 3/4" 10-WAY TOPSAN 24X19 01282068 FJ301282068I0020 3/4" 11-WAY TOPSAN 24X19 01282070 FJ301282070I0020 3/4" 12-WAY TOPSAN 24X19 01282084 FJ301282084I0020 1" 4-WAY TOPSAN 01282086 FJ301282086I0020 1" 5-WAY TOPSAN 01282088 FJ301282088I0020 1" 6-WAY TOPSAN 01293260 FF801293260I0040 3/4" 2-WAY TOPWAY SINGLE BAR 36MM 01293262 FF801293262I0040 3/4" 3-WAY TOPWAY SINGLE BAR 36MM 01293264 FF801293264I0040 3/4" 4-WAY TOPWAY SINGLE BAR 36MM 01293266 FF801293266I0040 3/4" 5-WAY TOPWAY SINGLE BAR 36MM 01293268 FF801293268I0040 3/4" 6-WAY TOPWAY SINGLE BAR 36MM 01293270 FF801293270I0040 3/4" 7-WAY TOPWAY SINGLE BAR 36MM 01293272 FF801293272I0040 3/4" 8-WAY TOPWAY SINGLE BAR 36MM 01293274 FF801293274I0040 3/4" 9-WAY TOPWAY SINGLE BAR 36MM 01293276 FF801293276I0040 3/4" 10-WAY TOPWAY SINGLE BAR 36MM 01293278 FF801293278I0040 3/4" 11-WAY TOPWAY SINGLE BAR 36MM 01293280 FF801293280I0040 3/4" 12-WAY TOPWAY SINGLE BAR 36MM 01293290 FF801293290I0040 3/4" 2-WAY TOPWAY SINGLE BAR 50MM 01293292 FF801293292I0040 3/4" 3-WAY TOPWAY SINGLE BAR 50MM 01293294 FF801293294I0040 3/4" 4-WAY TOPWAY SINGLE BAR 50MM 01293296 FF801293296I0040 3/4" 5-WAY TOPWAY SINGLE BAR 50MM 01293298 FF801293298I0040 3/4" 6-WAY TOPWAY SINGLE BAR 50MM 01293300 FF801293292I0040 3/4" 7-WAY TOPWAY SINGLE BAR 50MM 01293302 FF801293302I0040 3/4" 8-WAY TOPWAY SINGLE BAR 50MM 01293304 FF801293304I0040 3/4" 9-WAY TOPWAY SINGLE BAR 50MM 01293306 FF801293306I0040 3/4" 10-WAY TOPWAY SINGLE BAR 50MM 01293308 FF801293308I0040 3/4" 11-WAY TOPWAY SINGLE BAR 50MM 01293310 FF801293310I0040 3/4" 12-WAY TOPWAY SINGLE BAR 50MM 01293830 FF801293830I0040 1" 2-WAY TOPWAY SINGLE BAR 01293832 FF801293832I0040 1" 3-WAY TOPWAY SINGLE BAR 01293834 FF801293834I0040 1" 4-WAY TOPWAY SINGLE BAR 01293836 FF801293836I0040 1" 5-WAY TOPWAY SINGLE BAR 01293838 FF801293838I0040 1" 6-WAY TOPWAY SINGLE BAR 01293840 FF801293840I0040 1" 7-WAY TOPWAY SINGLE BAR 01293842 FF801293842I0040 1" 8-WAY TOPWAY SINGLE BAR 01293844 FF801293844I0040 1" 9-WAY TOPWAY SINGLE BAR 01293846 FF801293846I0040 1" 10-WAY TOPWAY SINGLE BAR 01293848 FF801293848I0040 1" 11-WAY TOPWAY SINGLE BAR 01293850 FF801293850I0040 1" 12-WAY TOPWAY SINGLE BAR 01294634 FF801294634I0020 1 1/4" 4-WAY TOPWAY SINGLE BAR 01294636 FF801294636I0020 1 1/4" 5-WAY TOPWAY SINGLE BAR 01294638 FF801294638I0020 1 1/4” 6 – WAYS TOPWAY SINGLE BAR 01294640 FF801294640I0020 1 1/4” 7 – WAYS TOPWAY SINGLE BAR 01294642 FF801294642I0020 1 1/4” 8 – WAYS TOPWAY SINGLE BAR 01294644 FF801294644I0020 1 1/4” 9 – WAYS TOPWAY SINGLE BAR 01294646 FF801294646I0020 1 1/4” 10 – WAYS TOPWAY SINGLE BAR 01294648 FF801294640I0020 1 1/4” 11 – WAYS TOPWAY SINGLE BAR 01294650 FF801294650I0020 1 1/4” 12 – WAYS TOPWAY SINGLE BAR 01307260 FJ201307260I0120 3/4" 2-WAY MULTIPLEX MANIFOLD 01307265 FJ201307265I0120 3/4" 3-WAY MULTIPLEX MANIFOLD 01307270 FJ201307270I0120 3/4" 4-WAY MULTIPLEX MANIFOLD 01307280 FJ201307280I0080 1" 2-WAY MULTIPLEX MANIFOLD 01307285 FJ201307285I0060 1" 3-WAY MULTIPLEX MANIFOLD 01307290 FJ201307290I0040 1" 4-WAY MULTIPLEX MANIFOLD 01303150 FEE01303150I0100 3/4" 2-WAY Modular simple manifold 01303152 FEE01303152I0100 3/4" 3-WAY Modular simple manifold 01303154 FEE01303154I0100 3/4" 4-WAY Modular simple manifold 01303160 FEE01303160I0100 1" 2-WAY Modular simple manifold 01303162 FEE01303162I0100 1" 3-WAY Modular simple manifold 01303164 FEE01303164I0100 1" 4-WAY Modular simple manifold 28106000 FXB28106000I0A00 DN16X2 Pexb/Al/Pexb pipe coil 100m 28106010 FXB28106010I0AE0 DN16X2 Pexb/Al/Pexb pipe coil 200m 28106050 FXB28106050I0AN0 DN16X2 Pexb/Al/Pexb pipe coil 500m 28108010 FXB28108010I0960 DN16X2 Pexb/Al/Pexb pipe bar 4m 28106004 FXB28106004I0A00 DN20X2 Pexb/Al/Pexb pipe coil 100m 28106002 FXB28106002I0AE0 DN20X2 Pexb/Al/Pexb pipe coil 200m 28108014 FXB28108014I0960 DN20X2 Pexb/Al/Pexb pipe bar 4m 28106006 FXB28106006I0500 DN26x3 Pexb/Al/Pexb pipe coil 50m 28108016 FXB28108016I0400 DN26x3 Pexb/Al/Pexb pipe bar 4m 28107002 FRB28107002I0A00 DN16X2 Pert/Al/Pert pipe coil 100m 28107055 FRB28107055I0A00 DN16X2 Pert/Al/Pert pipe coil 100m random numbering 28107000 FRB28107000I0AE0 DN16X2 Pert/Al/Pert pipe coil 200m 28107004 FRB28107004I0AN0 DN16X2 Pert/Al/Pert pipe coil 500m 28107016 FRB28107016I0A00 DN20X2 Pert/Al/Pert pipe coil 100m 28107018 FRB28107018I0AF0 DN20X2 Pert/Al/Pert pipe coil 240m 10BPB-25C 10MM POLYBUTYLENE BARRIER PIPE 25M COIL 10BPB-50C 10MM POLYBUTYLENE BARRIER PIPE 50M COIL 10BPB-100C 10MM POLYBUTYLENE BARRIER PIPE 100M COIL 15BPB-25C 15MM POLYBUTYLENE BARRIER PIPE 25M COIL 15BPB-50C 15MM POLYBUTYLENE BARRIER PIPE 50M COIL 15BPB-85C 15MM POLYBUTYLENE BARRIER PIPE 85M COIL 10BPB-100C 15MM POLYBUTYLENE BARRIER PIPE 100M COIL 10BPB-120C 15MM POLYBUTYLENE BARRIER PIPE 120M COIL 10BPB-150C 15MM POLYBUTYLENE BARRIER PIPE 150M COIL 10BPB-300C 15MM POLYBUTYLENE BARRIER PIPE 300M COIL

Approval Holder:

Emmeti Spa

Company Name

Emmeti Spa

Address

Via Brigata Osappo 166, 33074 Vigonovo frazione di Fontanafredda (PN)

Country

Italy

View All Listings by this Company

Range of wall mounted, concealed, manual blending bath shower mixers (brass bodies, various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member and a self-cancelling diverter (to divert the flow between a shower outlet or bath spout outlet - not supplied). The products comprise of a basic set, (concealed body), which includes the ceramic cartridge and a finish set that includes the self-cancelling diverter, headwork collar, operating member and trim set. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

2205035

Note:

This approval does not include a shower hose and handset, or a bath spout. The 31 741 180 Hansgrohe Basic set is not approved in its own right.

Size:

Inlet: ½” BSP (F) to basic set. Shower Outlet: ½” BSP (F). Bath Outlet: ¾” BSP (F).

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R030

Expiry date:

31/05/2027

Model:

31 741 180 Hansgrohe Basic set for single lever bath mixer for concealed installation which must be installed in conjunction with the following finish sets: 31 484 xxx Hansgrohe Metris Single lever bath mixer, 31 947 xxx Hansgrohe Focus Single lever bath mixer, 71 406 xxx Hansgrohe Logis Single lever bath mixer, 71 746 xxx Hansgrohe Talis E Single lever bath mixer, 72 407 xxx Hansgrohe Talis S Single lever bath mixer. Models added November 2025: 71 449 xx0 and 71 458 xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company