Directory Search Results

Print List

#251102716

Excelsior Range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Sizes can be any of the following for all models: Cold Inlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Primary and heat pump circuits: 22mm stub, 28mm stub, 32mm stub, ¾” BSP (F), 1” BSP (F) or 1 ¼” BSP (F) Hot Outlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Secondary circulation circuit: ½” BSP (F) or ¾” BSP (F)
Marking:
Fabdec, model name, max pressure, max temp, capacity and other technical information on label on body.
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
Model (Available Capacity (L)) WDE-D2 (80, 100, 130 ,150, 175, 215, 255, 305, 400& 500L) WDE-C1(80, 100, 130 ,150, 175, 215, 255, 305, 400& 500L) WS-C1 (130, 150, 175, 215, 255, 305, 400 & 500 L) WS-C2 (130, 150, 175, 215, 255, 305, 400 & 500 L) WHP-C1 (150, 175, 215, 255, 275, 305, 400 & 500L) WHP-C2 (150, 175, 215, 255, 305, 400 & 500L) WT-D2F5 (100, 130, 150, 175 & 210L) WT-C1F5 (100, 130, 150, 175 & 210L) WT-D2F4 (80, 100, 130, 150 & 165L) WT-C1F4 (80, 100, 130, 150 & 165L) WTR-C2F5 (100, 130, 150, 175 & 210L) WB (Buffer Vessel Only)

Approval Holder:
Fabdec Ltd
Company Name
Fabdec Ltd
Address
Grange Road Ellesmere Shropshire
Postcode
SY12 9DG

View All Listings by this Company

Print This Approval


#251104701

Range of unvented heat pump storage cylinders which consist of an air-source heat pump sitting on top of the tank with either no internal coil (model numbers ending without S) or a factory fitted single internal coil (model numbers ending with S). The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C and an stainless steel immersion heater and titanium alloy anode. The product is not supplied with an inlet control group (safety kit). Maximum operating temperature 70°C. Maximum working pressure (primary & secondary circuit) 5.5 bar.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F).
Marking:
Clivet on front panel. Clivet and product info on data label.
Installation Requirements:
R001 R140 R360
Expiry date:
30/11/2030
Model:
DSDH-P AQ 1 S 190 (185L), DSDH-P AQ 1 S 300 (275L), DSDH-P AQ 1 S 190S (180L), DSDH-P AQ 1 S 300S (270L).

Approval Holder:
Clivet S.p.A
Company Name
Clivet S.p.A
Address
Via Camp Lonc 25 32032 Z.I. Villapaiera Feltre (BL)
Country
Italy
Phone
+39 0439 3131
General Email
info@clivet.it

View All Listings by this Company

Print This Approval


#251208003

Range of automatic air venting valves with a brass body and a plastic float. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
251208003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
RBM Manufacturer’s logo on body, 10 bar & temperature.
Installation Requirements:
R001 R200
Expiry date:
31/12/2030
Model:
AAV079103800B: ⅜” BSP (M), AAV079105000B: ½” BSP (M), AAV07911500B: 15mm compression (for use with copper pipe to EN1057).

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
RBM S.p.a.
Company Name
RBM S.p.a.
Address
Componenti Per Impianti Idrotermici Via S. Giuseppe, 1 25075 Nave (Brescia)
Country
Italy
General Email

View All Listings by this Company

Print This Approval


#251115308

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface finishInlet DimensionMax Wrk. PressureMax Op. Temp.MarkingMarking LocationAll metals in the water pathway are on the 4msi positive listHeadworkFixing TypeSpout Outlet Includes
86005640Chrome15mm compression joint10 bar80 °CTRITON,86005640Handle/ bodyNoCeramic cartridge

Approval Holder:
Triton Showers (Part of Norcros Group Holdings)
Company Name
Triton Showers (Part of Norcros Group Holdings)
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
07779013141
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company
Manufacturers:
Xiamen Fotec Sanitary Ware Co., Ltd.

Print This Approval


#251102041

Wall mounted, concealed shower valve (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to shower outlets with a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251102041
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe Spa on backplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
24.340.xxx Must be installed with rough-in set 35.600 or 35.604. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Super steel AL0 – Brushed hard graphite

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#251108005

Range of wall mounted, manually operated, concealed shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251108005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” NPT (F).
Marking:
BAGNODESIGN on faceplate ring.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
BDM-STU-410-XX Studio 316 wall mounted concealed shower mixer. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#251108007

Range of manually operated, concealed blending valves with brass body (various finishes) and ceramic cartridge headwork and single lever operating member. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251108007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the shroud.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
XX 3005 YY. First two letters (e.g. XX) – These are replaced with letters representing the name of the trim (handles). The number of letters will depend on the name of the trim. Examples are, but not limited to: ZU - which represents the name Zurich. DO - which represents the name Domo. DC - which represents the name Decca. Middle four numbers (e.g. 3005) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are but not limited to: BN - Brushed Nickel, CP - Chrome, GM - Gunmetal, BB - Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#241002116

Range of T type thermostatic blending valves with (brass bodies - chrome plated finishes). The inlets incorporate a stainless-steel strainer. For use with copper pipe (BS EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002116
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Model
Marking:
flowIT logo, Model, flow arrow and WRAS on body.
Installation Requirements:
R001 R010 R040 R120
Expiry date:
31/10/2029
Model:
FTTMV-12 - 1/2" FTTMV-12 - 3/4"

Approval Holder:
flowconME SRL
Company Name
flowconME SRL
Address
Via Cesare Battisti, 2 CAP- 40123 Bologna
Country
Italy

View All Listings by this Company

Print This Approval


#251112019

Range of wall mounted thermostatic blending valves (chromium plated brass) incorporating a ceramic disc diverter (models SD4373-2S) with various operating members. A quarter turn ceramic disc headwork (models SH40001-2, SD4373S) or 2 quarter turn ceramic disc headworks (model SH40001). The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate approved check valve cartridge(s), however, the complete product has not been fully tested to demonstrate backflow protection. Models SH40001-2, SH40001 incorporate stainless steel strainers. Supplied with a shower hose, shower handset, riser rail & overhead shower outlet (models SD4373-2S, SH40001). SD4373S incorporates a shower hose, shower handset & riser rail. SH40001-2 incorporates an overhead shower outlet Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C. Model SH40001 Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
251112019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SH40001-2, SH40001 15mm compression SD4373S, SD4373-2S 1/2” x 3/4” BSP (M) Offset Union
Marking:
“SUERDA” & CPS on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
SH40001-2 15mm compression One-Way Thermostatic Period Style Shower - Chrome SH40001 15mm compression Two-Way Thermostatic Period Style Shower - Chrome SD4373S 1/2” x 3/4” BSP (M) Offset Union One-Way Thermostatic Shower - Chrome SD4373-2S 1/2” x 3/4” BSP (M) Offset Union Two-Way Thermostatic Shower - Chrome

Approval Holder:
ZHEJIANG SUERDA SANITARY CO.,LTD.
Company Name
ZHEJIANG SUERDA SANITARY CO.,LTD.
Address
No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
ZHEJIANG SUERDA SANITARY CO.,LTD.
Company Name
ZHEJIANG SUERDA SANITARY CO.,LTD.
Address
No.39 Changshun Road, Bingang Industrial Zone, Shamen Town, Yuhuan County, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#251104012

Wall mounted, concealed, thermostatic blending valve incorporating a thermostatic cartridge with a dome operating member and supplied with a trim set. Each inlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
251104012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Keuco on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
59554 xx00zz Trim set 59554 000170 – Rough part xx = 01 chrome plated; 02 polished bronze; 03 brushed bronze; 04 polished nickel; 05 brushed nickel; 07 stainless steel finish; 12 polished black chrome; 13 brushed black chrome; 17 aluminium finish; 37 black matt zz = 01 rosette round; 02 rosette squared; 21 as set with rosette round; 22 as set with rosette squared.

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1095 of 1181

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.