Tundish with a black metal body and a straight through pattern. The tundish complies with the requirements of an air gap to drain. Maximum operating temperature 99°C.
Range of combined temperature and relief valves (pre-set @ 7.0 bar or 10.0 bar - see model) incorporating DZR brass bodies and EPDM diaphragms. The valves incorporate a manually operated rotational easing gear.. Maximum operating temperature 95°C.
Range of spherical valves with brass bodies (chrome plated), brass ball, PTFE seats and EPDM ‘O’-rings. For use with Polybutylene pipe (manufactured to BS7291 part 2) and PEX pipe (manufactured to BS7291 part 3) with a maximum working pressure of 10.0 bar. Cold water use only and from October 2020 with a maximum operating temperature of 85°C. For use with copper pipe (manufactured to EN 1057) with a maximum working pressure of 10.0 bar. Maximum operating temperature of 85°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, silicone diaphragm and PTFE washers. The valves incorporate lever easing gear. The valves are factory pre-set at 6.0 bar (PTEM510001), 7.0 bar (PTEM510002) or 10.0 bar (PTEM510003). Maximum operating temperature 95°C.
‘Predator pressure reducing valve’ range of manually adjustable pressure reducing valves with DZR brass bodies, EPDM’O’-rings and a stainless steel filter. The products are adjustable between 1.0 and 6.0 bar and are supplied with an optional pressure gauge. Maximum supply pressure 20.0 bar. Maximum operating temperature 80°C.
Range of pre-set pressure relief valves incorporating DZR brass bodies and an EPDM diaphragm, (for pre-set pressures see model). The valve is fitted with hand operated rotating easing gear. Maximum working pressure is the same as the pre-set pressure (see model). Maximum operating temperature 85°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Range of screw down stop valves with brass bodies and PTFE seals. For use with copper pipe to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 65ºC.
Range of adjustable in-line pressure reducing valves with bronze bodies and manually operated pressure reducing mechanism. Outlet pressure adjustable between 1.5 to 6.0 bar. Maximum supply pressure 16.0 bar. Maximum operating temperature 60°C.
Combined pressure and temperature relief valves with DZR brass bodies, stainless steel springs, nylon coated probe, EPDM diaphragm and silicone seat disc. The valves incorporate lever easing gear. The valves have a factory pre-set pressure of 7.0 or 10.0 bar (see model). Maximum operating temperature 85°C.
Range of lever operated spherical valves incorporating brass bodies and brass ball (various finishes) to be used with PEX pipe (manufactured to BS7291 part 3), Polybutylene Pipe (manufactured to BS7291 Part 2) and copper pipe (manufactured to EN1057). Maximum working pressure 6.0 bar (for PEX and Polybutylene pipe). Maximum working pressure of 20.0 bar (for copper pipe). Maximum operating temperature 95˚C.
Combined temperature and pressure relief valve incorporating a gunmetal body and manually operated lever-type easing gear. Factory set at 7.0 bar. Maximum operating temperature 95°C.
Cold water inlet control group with a DZR brass body consisting of a pressure reducing valve (with an adjustbale range between 1.5 and 3.5 bar, but factory pre-set at 3.0 bar), which incorporates a stainless steel strainer, and a pressure relief valve (pre-set at 6.0 bar). The product incorporates a single check valve cartridge (verified by test, suitable for backflow protection against Fluid Category 2). The expansion valve is fitted with a rotary type easing gear. Maximum inlet supply pressure 16.0 bar. Cold water use only.
Range of screw down stop valves with plastic bodies to be used with PEX, MDPE and copper pipe. For above ground use only. Maximum working pressure 16.0 bar, cold water use only.
Drain cock elbow incorporating a DZR brass body with EPDM ’O’-rings (ZELB250445 model) or NBR ‘O’-rings (ZELB250446 model added July 2022). Both models are for use with copper pipe (manufactured to BS EN 1057). Maximum working pressures: ZELB250445 model - 10.0 Bar. ZELB250446 - 16.0 bar. Maximum operating temperature 85°C.
Range of combined thermal balancing and pressure reducing valves with gun metal bodies, stainless-steel strainer, pressure gauge and temperature gauge. Maximum inlet supply pressure 16.0 bar. Outlet pressure range of 1.5 bar – 5.5 bar. Maximum operating temperature 85°C.
Range of pressure relief valves incorporating brass bodies and EPDM rubber washers. The valves incorporate a manually operated rotational easing gear. For maximum working pressure please refer to model. Maximum operating temperature 99°C.
Range of polypropylene push-fit fittings and inserts for use with MDPE pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.
Range of polypropylene push-fit fittings with inserts for use with MDPE Pipe (manufactured to BS EN 12201-2) on one side of the fitting and PB (BS 7291), PEX (BS 7291) or Copper (BS EN 1057) on the other. Models UTS147-DB, UTS197-DB & UTS251-DB are for above and below ground use. All other models are for above ground use only. Maximum working pressure when using 20mm pipe is 16.0 bar. Maximum working pressure when using 25mm & 32mm pipe is 12.5 bar. Cold water use only.
Range of flow switches with brass bodies incorporating EPDM ‘O’-rings, acting as a leak detection system that actuates an integral spherical valve to shut off the water supply. The inlet incorporates a stainless steel strainer. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.
Page 1 of 5
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
