Range of hand shower outlets with chromium plated plastic bodies, stainless steel strainers and a plastic flow regulator.

Section:

1650 Shower Outlets

WRAS Approval Number:

2307013

Expiry date:

31/07/2028

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Model:

24 125 xxx 24 126 xxx xxx denotes the surface finish. It will always be 3 digits. 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of wall mounted, manual blending shower mixers with (brass bodies - various finishes), incorporating a ceramic cartridge headwork and single lever operating member. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

2307026

Expiry date:

31/07/2028

Note:

Not supplied with hose and handset.

Size:

½” BSP (M) x ¾” BSP (M) offset unions

Marking:

Hansgrohe on operating member.

Installation Requirements:

R001 R010 R040

Model:

32 620 xx0 Hansgrohe Talis S. 71 600 xx0 Hansgrohe Logis. 71 262 xx0 Hansgrohe Logis. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly with (brass bodies - various finishes), incorporating a ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307027

Expiry date:

31/07/2028

Size:

Stainless Steel braided, PEX lined flexible hose assemblies incorporating a 3/8" BSP (F) captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

31 820 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of basin pillar taps (brass bodies - various finishes), incorporating self-closing headwork and a plastic aerator in the outlet. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1800 Taps

Section Subtitle:

Pillar, metal.

WRAS Approval Number:

2307028

Expiry date:

31/07/2028

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.

Marking:

Axor on body.

Installation Requirements:

R001 R009 R006

Model:

45 130 XXX Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes). Incorporating a ceramic cartridge headwork and a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307036

Expiry date:

31/07/2028

Size:

Stainless steel braided, PEX lined flexible hose assemblies incorporating a 3/8” BSP (F) captive nut end connections.

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009 R010

Model:

72 804 xx0 72 806 xx0 72 840 xx0 72 843 xx0 72 844 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted bar type thermostatic bath shower mixer (chromium plated brass), incorporating a diverter valve controlling the flow to either the spout outlet or shower outlet with a single lever operating member with manual override. The temperature is controlled independently via a thermostatic cartridge using a single lever or dome type operating members with a manual override. Both inlets incorporate an approved single check valve cartridge (however, the complete assembly has not been fully tested to demonstrate that it provides adequate backflow protection) and stainless-steel strainers. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0520 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.

WRAS Approval Number:

2307037

Expiry date:

31/07/2028

Size:

¾” BSP M x ½” BSP M union offset

Marking:

Hansgrohe on body

Installation Requirements:

R001 R020

Model:

13 112 000, 13 114 000, 13 115 000. Models added October 2023: 13 325 xx0 and 13 347 xx0. Model added April 2024: 13 384 xx0. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Deck mounted, two hole, single outlet fixed combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, shower hose and handset. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum Working Pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2307039

Expiry date:

31/07/2028

Size:

¾” BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R005 R030

Model:

71461 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Two hole, wall mounted, single outlet fixed combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headworks with a single lever operating member and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. Maximum Working Pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2307041

Expiry date:

31/07/2028

Note:

Shower hose and handset not supplied.

Size:

½” x ¾” BSP (M) Offset unions.

Marking:

Hansgrohe On Operating member

Installation Requirements:

R001 R030

Model:

71440 xxx, 71450 xxx 71547 xxx 71657 xxx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Floor mounted single hole, single outlet (fixed) combination tap assembly (brass body, various finishes - see models). Incorporating a ceramic cartridge headwork with a joystick type operating member and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator. The shower outlet connection incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with a shower hose and handset. Maximum working pressure 10.0 Bar.

Section:

0465 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2307051

Expiry date:

31/07/2028

Note:

This product is supplied with a shower hose and handset.

Size:

Specifically designed for use with rough kit 10 452 180 which has ½” BSP (F) inlets

Marking:

Axor on body

Installation Requirements:

R001 R030

Model:

39 451 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed), over the rim (swivel nozzle) bidet combination tap assemblies with (brass bodies - various finishes – see model), incorporating a ceramic cartridge headworks and single lever operating member. The spout outlet incorporates a plastic aerator, and the products are supplied with a lever operated pop-up waste. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0400 Combination Tap Assemblies - Bidet

Section Subtitle:

Single hole, metal.

WRAS Approval Number:

2307064

Expiry date:

31/07/2028

Note:

No testing performed on pop up waste.

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.

Marking:

Hansgrohe on operating member

Installation Requirements:

R001 R010 R006 R009

Model:

71 218 xx0 Hansgrohe Vernis Blend 71 219 xx0 Hansgrohe Vernis Shape Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower hoses with TPE linings and EPDM ‘O’-rings. Maximum operating temperature 60°C. Open outlet use only.

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

2303074

Expiry date:

31/03/2028

Marking:

Hansgrohe on conical nut.

Installation Requirements:

R001

Model:

30 334 118 Hansgrohe Metaflex'C 800mm chrome, 28 152 xxx Hansgrohe Mariflex showerhose 1250mm, 28 262 xxx Hansgrohe Metaflex C showerhose 1250mm chrome, 28 644 xxx Hansgrohe Metaflex Shower hose 1250mm, 30 475 518 Hansgrohe Metaflex C showerhose 1250mm, 28 153 xxx Hansgrohe Mariflex showerhose 1500mm, 28 263 xxx Hansgrohe Metaflex C showerhose 1500mm, 28 645 xxx Hansgrohe Metaflex Shower hose 1500mm, 28 266 xxx Hansgrohe Metaflex C showerhose 1600mm chrome, 30 475 618 Hansgrohe Meta showerhose 1600mm, 31 475 618 Hansgrohe Metaflex C 1600mm, 28 155 xxx Hansgrohe Mariflex showerhose 1750mm, 28 265 xxx Hansgrohe Metaflex C showerhose 1750mm, 28 646 xxx Hansgrohe Metaflex Shower hose 1750mm, 30 511 718 Hansgrohe Metaflex showerhose 1750mm, 28 154 xxx Hansgrohe Mariflex showerhose 2000mm, 28 264 xxx Hansgrohe Metaflex C showerhose 2000mm chrome, 28 647 xxx Hansgrohe Metaflex Shower hose 2000mm.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Deck mounted, two hole, single outlet fixed combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic aerator and the products are supplied with metal backnuts, shower hose and handset. The shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum Working Pressure 10.0 bar. Maximum operating temperature 60°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2307040

Expiry date:

31/07/2028

Size:

¾” BSP (M).

Marking:

Hansgrohe On Body.

Installation Requirements:

R001 R006 R030

Model:

71462 xxx.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Single hole, single outlet (swivel) combination tap assembly (various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. This product is supplied with a click type pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309006

Expiry date:

30/09/2028

Note:

No testing performed on pop up waste

Size:

Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections

Marking:

Hansgrohe on body

Installation Requirements:

R001 R006 R009

Model:

31 161 xxx Metris S Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of shower handsets with (plastic bodies - various finishes, see models) incorporating a stainless-steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

WRAS Approval Number:

2309016

Expiry date:

30/09/2028

Note:

Open outlet use only.

Size:

½” BSP (M) inlets

Marking:

Hansgrohe logo on body

Installation Requirements:

R001 R040

Model:

26 807 xxx 26 807 670 Where xx0 denotes the surface finish it will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of Wall mounted, concealed, manually operated blending valves incorporating brass bodies (various finishes) and a ceramic cartridge headwork and single lever operating member. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

2000 Valves

Section Subtitle:

Blending, manually operated.

WRAS Approval Number:

2309050

Expiry date:

30/09/2028

Note:

The rough in kit is not approved in its own right.

Size:

Specifically for use with rough kit 01800180 which has ¾” BSP (F) inlets.

Marking:

Hansgrohe logo on rough kit body and operating member

Installation Requirements:

R001 R010

Model:

31 652 xx0 71 768 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of push button ceramic cartridge headworks with a plastic body and EPDM seals. For insertion into specifically dimensioned tap assemblies Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0440 Headworks

WRAS Approval Number:

2309043

Expiry date:

30/09/2028

Size:

20mm OD

Marking:

Hansgrohe logo on body

Installation Requirements:

R001

Model:

30122200 30122210 31122200 31122201 31122203 31122210

Factor:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating ceramic cartridge headworks, with single lever or dome type operating members. The spout outlet incorporates a plastic aerator. Some models are supplied with a lever type pop up waste (see models) Other models are supplied with a permanently open waste set. Maximum working pressure 10.0 Bar Maximum operating temperature 70.0°C

Non-metallic materials and components comply with BS6920 at 70°C

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

WRAS Approval Number:

2309007

Expiry date:

30/09/2028

Size:

Stainless Steel braided PEX lined flexible hose assemblies incorporating 3/8" BSP captive nut end connections.

Marking:

Axor on operating member

Installation Requirements:

R001 R006 R009 R583

Model:

38 021 xxx 38 023 xxx (Pop up waste supplied) 38 026 xxx 38 032 xxx 38 034 xxx 45 001 xxx (Pop up waste supplied) 45 002 xxx 45 003 xxx 45 004 xxx 45 005 xxx

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Range of nylon braided hoses with TPSiV inner liner and brass end connections incorporating EPDM washers.Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2310006

Expiry date:

31/10/2028

Size:

½” BSP captive nut.

Marking:

Axor or Hansgrohe on conical nut.

Installation Requirements:

R001

Model:

28 220 xx0: Hansgrohe Designflex, Textile shower hose 125 cm, 28 227 xx0: AXOR Shower Solutions, Textile shower hose 1.25 m with conical and cylindrical nut, 28 228 xx0: AXOR Shower Solutions, Textile shower hose 1.25 m with cylindrical nuts, 28 230 xx0: Hansgrohe Designflex, Textile shower hose 200 cm, 28 259 xx0: AXOR Shower Solutions, Textile shower hose 1,60 m with conical and cylindrical nut, 28 260 xx0: Hansgrohe Design flex, Textile shower hose 160 cm, 28 261 xx0: AXOR Shower Solutions Textile shower hose. 1.60 m with cylindrical nuts, 28 290 xx0: AXOR Shower Solutions Textile shower hose. 2 m with conical and cylindrical nut, 28 291 xx0: AXOR Shower Solutions Textile shower hose 2 m with cylindrical nuts. Models added April 2024: 28 221 xx0: Hansgrohe Designflex, Textile shower hose 125 cm, 28 250 xx0: Hansgrohe Design flex, Textile shower hose 160 cm. 28 240 xx0 - Hansgrohe Designflex - 175 cm. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

A wall mounted two-hole, single outlet, fixed combination tap assembles (brass body – various finishes). Incorporating quarter turn ceramic disc headwork with single lever operating members and a self-cancelling diverter to a shower outlet. The temperature is controlled independently via a thermostatic cartridge. Both operating members incorporate a manual override button. The inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout incorporates a plastic aerator. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

0530 Combination Tap Assemblies

Section Subtitle:

Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.

WRAS Approval Number:

2310011

Expiry date:

31/10/2028

Note:

Hose and handset not supplied.

Size:

1/2" BSP (M).

Marking:

Hansgrohe on body.

Installation Requirements:

R001 R030

Model:

13 141 xx0 - Hansgrohe Ecostat Select. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company

Wall mounted, exposed, thermostatic blending valve with a brass body (various finishes). The flow is controlled via a quarter turn ceramic disc with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Product is not supplied with shower hose of handset. Maximum working pressure 10.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

2010 Valves

Section Subtitle:

Blending, thermostatic.

WRAS Approval Number:

2310019

Expiry date:

31/10/2028

Size:

½” BSP (M).

Marking:

Axor on faceplate.

Installation Requirements:

R001 R010 R040

Model:

12 602 xxx - Axor Starck Organic. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, 77761 Schiltach

View All Listings by this Company