Section Code 2010 : Blending, thermostatic.
Back To Directory SectionsRange of floor standing, two-hole, single outlet, thermostatic blending valves (various finishes). Incorporating a sequential headwork controlling both flow and temperature with a single lever operating member. The product incorporates a self-cancelling diverter to overhead shower with a dome operating member. Outlet of the diverter incorporates approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also supplied with shower hose and shower handset. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C
Range of concealed thermostatic bath/shower mixer valves (brass bodies), the valve can be supplied as a dedicated thermostatic valve or with a ¾” stop valve, 2way diverter or a 3way diverter that also controls the flow. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with various designs of face plates and operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, bar type thermostatic shower mixing valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a single lever, dome, cubed or cross top operating member (depending on model). The temperature is controlled independently via a thermostatic cartridge with a single lever, dome, cubed or cross top operating member (depending on model) and incorporates a manual override button. The product also incorporates an approved check valve cartridge located on the inlets of the valve, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products also incorporate a stainless-steel strainer located on the inlets of the valve. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C
Range of wall mounted concealed digital blending, thermostatic shower units with plastic bodies with single or double outlets. Flow is controlled via solenoid valve. The units incorporate flow regulators, check valves, stainless steel strainer and EPDM O-rings. Models with “I” at the end of the model number are supplied with pushfit isolation valves on the inlets. Incorporates approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Wall mounted, concealed, digitally controlled thermostatic blending valve with a plastic body. Flow is controlled by an electronically operated mechanical valve and then to each outlet by a solenoid valve which is actuated via a touch sensor. Temperature is controlled by an electronically operated mixing valve containing a thermostatic element. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The cold inlet incorporates a plastic flow regulator. Models with an ‘I’ suffix are supplied with two brass bodied 15mm x 15mm pushfit screwdriver operated isolation valves, for installation on each inlet. Maximum working pressure 5.0 Bar. Maximum operating temperature 65°C
Range of wall mounted two hole thermostatic blending valves having brass bodies (various finishes). Incorporating a 2 way ceramic disc diverter (2 on, 1 off) flow control which also diverts the flow from a shower to shower outlet with dome type operating members. The temperature is controlled independently via a thermostatic cartridge and dome type or lever type operating members. Inlets incorporates approved check valve cartridges, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating a manually operated diverter from overhead shower to shower handset, with a half turn ceramic disc headwork controlling the flow using a dome or cube type operating member depending on model. Product is supplied with a riser, shower hose, shower handset and over head shower The temperature is controlled independently via a thermostatic cartridge also using a dome or cube type operating member (Depending on model) that incorporates a manual override button. Both inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The 3663602665946 model has cube type operating members, the 3663602664956 model has dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Wall mounted, exposed, thermostatic blending shower valves incorporating a ½ turn ceramic disc headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge incorporating a manual override button and dome type operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C
Range of wall mounted thermostatic shower valves with brass bodies (various finishes) Incorporating ceramic disc headworks, and dome type operating members and a self cancelling diverter to the shower outlets. The temperature is controlled independently via a thermostatic cartridge and dome type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. The inlet to the overhead shower incorporates a plastic flow regulator. Inlets to the main body incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed bar type thermostatic shower valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with dome or cube type operating member. Temperature is controlled independently via a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Also incorporates a stainless steel strainer located on both inlets. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C
Range of thermostatic mixing valves (brass body) with a thermostatic cartridge controlling the temperature. Models are supplied with dome or cube type operating members and a chrome faceplate. Each inlet incorporates an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum operating temperature 60 °C.
Range of wall mounted concealed thermostatic blending valves (brass), incorporating either quarter turn ceramic disc headworks (models PG-2107-1 & PG-2108-1) with either dome type (PG-2108) or single lever (PG-2108-1) operating members, or a manual diverter (models PG-2107 & PG-2108) with either cube type (PG-2107) or single lever (PG-2108) operating members. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. The inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: 10.0 bar. Maximum operating temperature: 60°C.
Range of wall mounted, two-hole, single shower outlet combination tap assemblies (chromium plated brass). The flow is controlled by a ceramic disc headwork (with various operating members). temperature is controlled VIA a thermostatic cartridge (with various operating members which incorporate a manual override button). Both inlets incorporate approval single check valve cartridges, however the complete unit has not been tested to show it provides back flow protection. Models ST20015CP & COOR incorporate elbows. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C
Range of wall mounted, exposed thermostatic shower valves (chromium plated brass). Flow is controlled by a quarter turn ceramic cartridge headwork and temperature is controlled independently via a thermostatic cartridge, both with dome operating members. Both inlets incorporate stainless steel strainers. Some valves are supplied with shower hose, riser rail and shower handset (please refer to model). Some valves are supplied with shower hose, riser rail, shower handset & overhead shower (please refer to model). On these models the flow is diverted between shower handset & overhead shower by the quarter turn ceramic cartridge headwork. The inlets of models (Atom ERD – (1.1836.003) Coda Pro ERD – (1.1836.006) Relate ERD – (2.1878.002) Reflex ERD – (2.1878.004) APT ERD – (1.1878.008) & React ERD – (2.1878.006) incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 45°C.
Wall mounted thermostatic shower valve (chromium plated brass) incorporating a two way ceramic disc diverter controlling the flow to either the shower handset or an overhead shower using a single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a dome or cube type operating member. The product is supplied with an overhead shower, riser rail, shower hose and handset. Each inlet incorporates a stainless steel strainers and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Thermostatic mixing valve with brass body. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted thermostatic shower valves (chromium plated brass body), incorporating a quarter turn ceramic disc headwork controlling the flow and thermostatic cartridge controlling the temperature, both with dome type operating members. Each inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of wall mounted, two-hole, thermostatic shower valves (chromium plated brass). In models TLM28F, TLM28G, TLM28H, TLM28I, TLM90, TLM90B, TLM95, TLM95B and TLM01F flow is controlled via a quarter turn ceramic disc headwork with dome or cube operating members. In models TLM46F, TLM46G, TLM46H, TLM46I, TLM39F and TLM39G flow is controlled via a half turn ceramic disc headwork with dome or cube operating members. The temperature is controlled by a thermostatic cartridge with dome or cube type operating members which incorporate a manual override button. The inlets incorporate a stainless-steel strainer and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C
Shower kit consisting of a wall mounted thermostatic bar type shower valve with a non-rising spindle headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge which incorporates a manual override button with dome operating members. The inlets incorporate a stainless steel strainer and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides back flow protection. Product also comes with a stainless steel braided hose with EPDM lining, a chromium plated plastic shower handset and riser rail. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page 6 of 34
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.