Water Regulations Approval Scheme Ltd

Combination Tap Assemblies

Section Code 0550 : Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.

Back To Directory Sections

WRAS Approval Number: #1906900

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with either cross top or single lever operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum operating pressure 8.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1906900
Expiry date:: 30/06/2024
Size:: ½” BSP (M)
Marking:: Bristan on plinth.
Installation Requirements:: R001 R006 R010
Model:: DUL DSM C & DUX DSM C.
Factor:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #1907701

Range of two hole, single outlet (swivel) combination tap assemblies (include chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The products are also supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907701
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: T&S on operating member.
Installation Requirements:: R001 R006 R010
Model:: UK-6DF00, UK-6DF06, UK-6DF08, UK-6DF10, UK-6DF12. Models added October 2020 UK-6DF00-WH4, UK-6DF06-WH4, UK-6DF08-WH4, UK-6DF10-WH4 & UK-6DF12-WH4.
Manufacturer:: T&S Brass and Bronze Works, Inc

Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

WRAS Approval Number: #1907705

Range of deck mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907705
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: T&S on operating member.
Installation Requirements:: R001 R006 R010
Model:: UK-7DF00, UK-7DF06, UK-7DF08, UK-7DF10 & UK-7DF12, Models added October 2020 UK-7DF00-WH4, UK-7DF06-WH4, UK-7DF08-WH4, UK-7DF10-WH4 & UK-7DF12-WH4
Manufacturer:: T&S Brass and Bronze Works, Inc

Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

WRAS Approval Number: #1907706

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with metal backnuts. Maximum working pressure 8.62 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907706
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: T&S on operating member
Installation Requirements:: R001 R010 R040
Model:: UK-8WF00-EE, UK-8WF06-EE, UK-8WF08-EE, UK-8WF10-EE & UK-8WF12-EE.
Manufacturer:: T&S Brass and Bronze Works, Inc

Company Name
T&S Brass and Bronze Works, Inc
Address
2 Saddleback Cove P.O. Box 1088 Travelers Rest South Carolina
Postcode
29690
Country
United States
Phone
1-800-868-0084

View All Listings by this Company

WRAS Approval Number: #1906099

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass bodies) quarter or half turn ceramic disc headwork and single lever or cross top operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1906099
Expiry date:: 30/06/2024
Size:: ¾” BSP Male
Marking:: 'Lefroy Brooks' on indice
Installation Requirements:: R001 R006 R010
Model:: XX1517 & XX9007. ‘XX’ denotes the type of operating members and is replaced with: LB (Classic cross handle) LS (Classic star handle) BL (Classic lever black ceramic) WL (Classic lever white ceramic) CH (Connaught cross handle) CL (Connaught lever) CR (Black crystal lever) FR (La Chapelle cross handle) FM (La Chapelle lever metal) FB (La Chapelle lever black ceramic) FW (La Chapelle lever white ceramic) MH (Mackintosh cross handle) ML (Mackintosh lever) MB (Mackintosh black lever) Bodies have the below cartridges: XX1517/H has 1/2 turn cartridges (for Cross Handles) XX1517/L has 1/4 turn cartridges (for Levers) XX1517/F has 1/4 turn cartridges (for LC Levers) XX9007/H has 1/2 turn cartridges (for Cross Handles) XX9007/L has 1/4 turn cartridges (for Levers) XX9007/F has 1/4 turn cartridges (for LC Levers)
Factor:: Lefroy Brooks Midland Ltd

Company Name
Lefroy Brooks Midland Ltd
Address
Unit 3 Marston Road Ind Est Marston Road Wolverhampton
Postcode
WV2 4LX
Country
West Midlands
Phone
01902 390893

View All Listings by this Company

WRAS Approval Number: #1907901

Range of two hole single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907901
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: Bristan on operating member
Installation Requirements:: R001 R006 R010
Model:: VAL DSM C CD & VAL DSM C 6 CD
Factor:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #1907913

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907913
Expiry date:: 31/07/2024
Size:: 1/2" BSP (M)
Marking:: 'SWAN' logo on operating member
Installation Requirements:: R001 R006 R010
Model:: C58119
Factor:: Wolseley

Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

WRAS Approval Number: #1909308

Range of two-hole, single outlet (swivel) combination tap assemblies (brass bodies with various finishes). Incorporating ceramic cartridge headworks and dome type operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1909308
Expiry date:: 30/09/2024
Size:: Stainless steel braided EPDM lined hose assembly incorporating ½”
Marking:: 1810 on operating member
Installation Requirements:: R001 R006 R010
Model:: FIN/01/CH - Chrome FIN/02/BS - Brushed Steel FIN/04/COP - Copper FIN/05/GM - Gunmetal FIN/06/GB - Gold
Factor:: The 1810 Company limited

Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

WRAS Approval Number: #1909042

SECURITOUCH range of wall mounted two hole, single outlet mixer taps with swivel spouts (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The outlets incorporate a plastic flow straightener. Some of the models have flow control features in the offset unions. Model 2445EPS incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60ºC.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1909042
Expiry date:: 30/09/2024
Size:: ¾” to ½” offset unions
Marking:: DELABIE on operating member
Installation Requirements:: R001 R010 R040
Model:: 2445 SECURITOUCH, 2445L SECURITOUCH, 2445EP SECURITOUCH, 2445LEP SECURITOUCH, 2445S SECURITOUCH, 2445LS SECURITOUCH, 2445EPS SECURITOUCH, 2445LEPS SECURITOUCH.
Factor:: Delabie Ltd.

Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

WRAS Approval Number: #1910703

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating either a ¼ turn ceramic disc (model 351908) or a non-rising spindle (models 4M3915 & 390905) headworks with either cross top (model 350905), dome type (model 4M3915) or single lever (model 351908) operating members. The products are supplied with both an aerator and flow straightener and metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1910703
Expiry date:: 31/10/2024
Size:: ½” BSP (M)
Marking:: Mercia (brand of Comap) on rear of Body
Installation Requirements:: R001 R006 R010
Model:: 350905 Mercia Cross Top Deck Sink Mixer, 4M3915 Mercia Modern Deck Sink Mixer & 391908 Mercia QT Deck Sink Mixer
Factor:: Comap UK Limited

Company Name
Comap UK Limited
Address
Unit C6 William Way Moss Ind Estate St Helens Road
Postcode
WN7 3PT
Country
Leigh

View All Listings by this Company
Manufacturer:: COMAP (JIANGMEN)

Company Name
COMAP (JIANGMEN)
Address
98 Longxi High Tech Zone Guangdong

View All Listings by this Company

WRAS Approval Number: #1909068

Range of wall mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a single sequential cartridge headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener and the inlets also incorporates metal flow restrictors and a shut off valve. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1909068
Expiry date:: 30/09/2024
Size:: ½” BSP (M)
Marking:: Delabie on operating member.
Installation Requirements:: R001 R010 R040
Model:: Securitouch Range: 2436p & 2436.
Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

WRAS Approval Number: #1909073

Range of deck mounted two-hole single outlet swivel combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 Bar. Maximum working temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1909073
Expiry date:: 30/09/2024
Size:: Stainless steel braided PE-X lined flexible hose assemblies incorporating 10mm spigot end connections.
Marking:: Dornbracht on tap body
Installation Requirements:: R001 R006 R007 R009 R010
Model:: 32800680 32805680 32812680 32843680
Factor:: Aloys F. Dornbracht GmbH & Co. KG

Company Name
Aloys F. Dornbracht GmbH & Co. KG
Address
Kobbingser Muhle 6 D-58640 Iserlohn
Country
Germany

View All Listings by this Company

WRAS Approval Number: #1910705

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating either a ¼ turn ceramic disc (model 348119) or a non-rising spindle (models C48105 & C48113) headworks with either cross top (model C48113), dome type (modelC48105) or single lever (model C48119) operating members. The products are supplied with both an aerator and flow straightener and metal back nuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 65°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1910705
Expiry date:: 31/10/2024
Size:: ½” BSP (M)
Marking:: SWAN LOGO BRAND OF WOLSELEY ON INDICE
Installation Requirements:: R001 R006 R010
Model:: C48113 SWAN X TOP 2 HOLE SINK MIXER, C48105 SWAN STANDARD 2 HOLE DECK SINK MIXER & C48119 SWAN 1/4 TURN LEVER DECK SINK MIXER
Factor:: Wolseley

Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

WRAS Approval Number: #1910021

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headwork with single lever operating members (BTDECKQT model) or non-rising spindle headwork with dome type operating members (BMDECK6L model). The spout outlets incorporate a plastic flow straightener (BMDECK6L model) or a plastic aerator (BTDECKQT model). The products are supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1910021
Expiry date:: 31/10/2024
Size:: ½” BSP (M)
Marking:: Blanco on body
Installation Requirements:: R001 R006 R010
Model:: BTDECKQT & BMDECK6L.
Factor:: Blanco Limited

Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

WRAS Approval Number: #1912311

Range of two hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1912311
Expiry date:: 31/12/2024
Size:: ½” BSP (M)
Marking:: DTC34 (brand name of Methven) on rear of body.
Installation Requirements:: R001 R006 R010
Model:: DLT105, VW DLT105, DLT SPEC105, 208.0574.213, 320890, DLV105, NLT105, 60177101.
Factor:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

WRAS Approval Number: #1907044

Range of two-hole, single outlet (swivel) combination tap assemblies (antique brushed or chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or a plastic/stainless steel flow straightener and the products are supplied with metal backnuts. Maximum working pressure 10.0 bar Maximum operating temperature 70°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907044
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: PPI on rear of body
Installation Requirements:: R001 R006 R010
Model:: M5004P, M3104SQL & M9004QL. Model added January 2020 M5004P AB (Antique brushed finish)
Factor:: PPI Xiamen Industry Co Ltd

Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

WRAS Approval Number: #1907072

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 1907072
Expiry date:: 31/07/2024
Size:: ½” BSP (M)
Marking:: NABIS KITCHENS (BRAND OF WOLSELEY) ON INDICE OR OPERATING MEMBER
Installation Requirements:: R001 R006 R010
Model:: B08916 NABIS MONATE DECK KITCHEN MIXER & B08920 NABIS REGAL LEVER KITCHEN MIXER
Factor:: Wolseley

Company Name
Wolseley
Address
Kingmaker Court Warwick Technology Park Warwick
Postcode
CV34 6DY

View All Listings by this Company

WRAS Approval Number: #2004009

Two-hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn non rising spindle headworks with single lever operating members. The spout outlet incorporates a metal flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2004009
Expiry date:: 30/04/2025
Size:: ½” BSP (M)
Marking:: Armitage Shanks on indice
Installation Requirements:: R001 R006 R010
Model:: S8207AA Markwik
Factor:: Armitage Shanks

Company Name
Armitage Shanks
Address
Old Road (Lodge 1), Armitage, Rugeley
Postcode
WS15 4BT
Country
Staffordshire,
Phone
+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company

WRAS Approval Number: #2101700

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. The inlet offset unions incorporate a servicing valve and the inlets to the taps incorporate a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2101700
Expiry date:: 31/01/2026
Size:: ½” x ¾” (M) BSP offset union with servicing valve.
Marking:: Delabie on operating member.
Installation Requirements:: R001 R010 R040
Model:: 2446 & 2446L Securitouch.
Factor:: Delabie Ltd.

Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

WRAS Approval Number: #2004055

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with single lever operating members. Both inlets incorporate washers with built-in stainless-steel strainers and approved check valve cartridges. However, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. All models incorporate a straight connector servicing valve located on both inlets. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2004055
Expiry date:: 30/04/2025
Size:: ½” BSP (M)
Marking:: Delabie on operating member.
Installation Requirements:: R001 R010 R040
Model:: Securitouch 2446LEPUK, 2447LEPUK & 2447LUK
Factor:: Delabie Ltd.

Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

WRAS Approval Number: #2005904

Two hole, single outlet swivel combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with dome type operating members. The spout outlet incorporates a plastic flow straightner. The product is supplied with Metal backnuts. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2005904
Expiry date:: 31/05/2025
Size:: ½” BSP (M)
Marking:: Alterna on operating members
Installation Requirements:: R001 R006 R010
Model:: ALTCNDSM
Factor:: Grahams Plumbers Merchant

Company Name
Grahams Plumbers Merchant
Address
Merchant House Binley Business Park Coventry
Country
CV3 2TT
General Email
jill.eyre@pegleryorkshire.co.uk

View All Listings by this Company

WRAS Approval Number: #2007041

Single hole, single outlet, swivel combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60 °C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007041
Expiry date:: 31/07/2025
Size:: 15mm copper tails.
Marking:: Blanco on body
Installation Requirements:: R001 R006 R010
Model:: Vicus Twin Lever
Factor:: Blanco Limited

Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

WRAS Approval Number: #2007045

Wall mounted two-hole, single outlet (swivel) combination tap assembly (stainless steel), incorporating quarter turn ceramic disc headworks with handwheel operating members. The spout outlet incorporates a plastic aerator. Each inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007045
Expiry date:: 31/07/2025
Size:: ½” BSP (M)
Marking:: Lush and Hornbeam Ivy Ltd on body
Installation Requirements:: R001 R010 R040
Model:: 1017LU-X52
Manufacturer:: Hornbeam Ivy Ltd

Company Name
Hornbeam Ivy Ltd
Postcode
BA11 4BY

View All Listings by this Company

WRAS Approval Number: #2007905

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating non-rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightner. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007905
Expiry date:: 31/07/2025
Size:: ½” BSP (M)
Marking:: Bristan on operating member.
Installation Requirements:: R001 R006 R010
Model:: VAX DSM C
Manufacturer:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #2009303

Range of two hole, singleoutlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non rising spindle headworks with various operating members. The spout outlets incorporate a plastic flow straightener. Products are supplied with plastic backnuts, model DCM SPEC105 is supplied with metal backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2009303
Expiry date:: 30/09/2025
Size:: ½” BSP (M)
Marking:: DTC34 (brand of Methven) on rear of body.
Installation Requirements:: R001 R006 R010
Model:: 187X DCM105 VW DCM105 208.0574.212 DCM SPEC105 MILAN 105
Factor:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court, Yew Tree Way, Golborne, Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602

View All Listings by this Company

WRAS Approval Number: #2007080

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007080
Expiry date:: 31/07/2025
Size:: 15mm copper tails.
Marking:: Blanco on body
Installation Requirements:: R001 R006 R010
Model:: RANGE OF VICUS TWIN LEVER COMBINATION TAP ASSEMBLY 524286 - PEWTER 524285 - BRASS 525117 - COPPER Models added December 2022: 526691 - PVD satin gold 524284 - Chrome
Factor:: Blanco Limited

Company Name
Blanco Limited
Address
1 Victor Way, Colney Street, St Albans
Postcode
AL2 2FL

View All Listings by this Company

WRAS Approval Number: #2012073

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener. The inlet offset unions incorporate an isolation valve. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2012073
Expiry date:: 31/12/2025
Size:: ½ “- ¾” BSP (M) Offset Valve.
Marking:: Delabie on operating member.
Installation Requirements:: R001 R010 R040
Model:: BIOSAFE Wall Mixers : 2640 (Spout L. 120mm & Eccentric coupling STOP-CHECK ref. 855755); 2641 (Spout L. 200mm & Eccentric coupling STOP-CHECK ref. 855755). Model added May 2022: 2640P (Spout L. 120mm & Eccentric coupling STOP-CHECK ref. 855755UK). Model added April 2024: 2644P – Eccentric coupling Stop-Check
Factor:: Delabie Ltd.

Company Name
Delabie Ltd.
Address
1-3 Henderson House Hithercroft Road Wallingford
Postcode
OX10 9DG
Country
Oxfordshire
Phone
+44 1491 824 449

View All Listings by this Company
Manufacturer:: Delabie SAS

Company Name
Delabie SAS
Address
18 Rue Du Marechal Foch 80130 Friville Escarbotin France

View All Listings by this Company

WRAS Approval Number: #2101013

Range of two-hole, single outlet, (swivel) combination tap assemblies (chrome plated brass) incorporating a ceramic cartridge headwork with single lever type operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2101013
Expiry date:: 31/01/2026
Size:: Stainless steel braided PEX lined flexible hose assemblies incorporating a 10mm spigot end connection.
Marking:: Dornbracht on base of spout.
Installation Requirements:: R001 R006 R007 R009 R010
Model:: 32800625 32815625
Manufacturer:: Dornbracht AG & Co. KG

Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn
Postcode
Germany

View All Listings by this Company

WRAS Approval Number: #2101051

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating rising spindle headwork with single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2101051
Expiry date:: 31/01/2026
Size:: ½” BSP (F)
Marking:: Top-Rinse and WRAS on body.
Installation Requirements:: R001 R006 R010
Model:: 9813-X double pantry faucet 9815-X single pantry faucet 9805-CP-N65-X deck mixing faucet X can be replaced by any of the following codes to determine the swivel radius of the spout: 06 = 6” 08 = 8” 10 = 10” 12 = 12” 14 = 14” 16 = 16” 18 = 18” P1 = 2-3/4” P2 = 2-11/16” P3 = 5-11/16” P4 = 7-3/4” P5 = 8-3/4” P6 = 12-1/4” 006DJ = 6” + 6” 007DJ = 6” + 9” 008DJ = 6” + 12” 009DJ = 12” + 12
Manufacturer:: Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

WRAS Approval Number: #2105904

Range of two hole, single outlet (swivel) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disk headworks and lever operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2105904
Expiry date:: 31/05/2026
Size:: ½” BSP (M)
Marking:: Bristan on the operating member.
Installation Requirements:: R001 R006 R010
Model:: VAL2 DSM C CD & VAL2 DSM C 6 CD (6” inch Lever)
Factor:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2105905

Two hole, single outlet swivel combination tap assembly (chrome plated brass), incorporating non-rising spindle headworks with dome operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2105905
Expiry date:: 31/05/2026
Size:: ½” BSP (M)
Marking:: Bristan on the operating member.
Installation Requirements:: R001 R006 R010
Model:: VAC2 DSM C MT
Factor:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2105906

Two hole, single outlet (swivel) combination tap assembly (chrome plated brass) incorporating non rising spindle headworks with cross top operating members. The spout outlet incorporates a plastic flow straightener. Supplied with metal back nuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2105906
Expiry date:: 31/05/2026
Size:: ½” BSP (M)
Marking:: Bristan on the operating member.
Installation Requirements:: R001 R006 R010
Model:: VAX2 DSM C
Factor:: Bristan Group Limited

Company Name
Bristan Group Limited
Address
Birch Coppice Business Park Pooley Hall Drive Dordon
Postcode
B78 1SG
Country
Tamworth
Phone
01827 254144
General Email
enquire@bristan.com

View All Listings by this Company

WRAS Approval Number: #2105003

Range of wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn rising spindle headworks with single lever operating members. The S8215AA model is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2105003
Expiry date:: 31/05/2026
Size:: S8215AA: ½” BSP (M). S8205AA: 15mm compression.
Marking:: Armitage shanks on operating members
Installation Requirements:: R001 R010 R040
Model:: S8215AA Markwik wall mounted mixer. S8205AA Markwik wall mounted mixer.
Factor:: Armitage Shanks Ltd

Company Name
Armitage Shanks Ltd
Address

View All Listings by this Company

WRAS Approval Number: #2107022

Range of two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with various operating members (see model). The spout outlets of the SH-T80541 & SH-T80542 models incorporate a plastic flow straightener, all other models incorporate a plastic aerator. The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2107022
Expiry date:: 31/07/2026
Size:: SH-T80541 & SH-T80542 models: ¾” BSP (M). All other models: ½” BSP (M).
Marking:: QIXI and WRAS on body
Installation Requirements:: R001 R006 R010
Model:: Single Lever: SH-T80541 SH-T81050B SH-T81086 SH-T80681L Cross Top: SH-T80681A SH-T81050 SH-T81079 SH-T80542 SH-T81050A Dome Type: SH-T80681
Manufacturer:: Zhejiang Qixi Sanitary Co., Ltd

Company Name
Zhejiang Qixi Sanitary Co., Ltd
Address
Huxin Industrial Area, Chumen Yuhuan Zhejiang
Country
China
Phone
189 685 872 326

View All Listings by this Company

WRAS Approval Number: #2107024

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2107024
Expiry date:: 31/07/2026
Size:: Stainless steel braided PEX lined flexible hose assemblies incorporating 10mm spigot end connections.
Marking:: Dornbracht on base of spout.
Installation Requirements:: R001 R006 R007 R009 R010
Model:: 32800790
Manufacturer:: Dornbracht AG & Co. KG

Company Name
Dornbracht AG & Co. KG
Address
Koebbingser Muehle 6 D-58640 Iserlohn
Postcode
Germany

View All Listings by this Company

WRAS Approval Number: #2107095

Range of two-hole, single outlet (swivel) combination tap assemblies (brass body - various finishes), incorporating quarter turn ceramic disc headworks with either single lever or wheel operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2107095
Expiry date:: 31/07/2026
Size:: Stainless steel braided EPDM lined flexible hose assemblies with ½" captive nut end connections.
Marking:: 1810 on body
Installation Requirements:: R001 R006 R010
Model:: Wheel operating members: HH-BM/01/CH (Chrome), HH-BM/02/BS (Brushed Steel), HH-BM/04/COP (Copper), HH-BM/05/GM (Gunmetal), HH-BM/06/GB (Gold), HH-BM/07/MB (Matt Black), HH-BM/08/BGB (Brushed Gold), Single lever operating members: MOU/01/CH (Chrome), MOU/02/BS (Brushed Steel), MOU/04/COP (Copper), MOU/05/GM (Gunmetal), MOU/06/GB (Gold), MOU/07/MB (Matt Black), MOU/08/BGB (Brushed Gold).
Factor:: The 1810 Company limited

Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

WRAS Approval Number: #2109003

Range of two-hole, single outlet (swivel) combination tap assemblies incorporating brass bodies (various finishes) and quarter turn ceramic disc headwork with either single lever or cross top operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2109003
Expiry date:: 30/09/2026
Size:: ½” BSP (M)
Marking:: Booth & Co. (brand of Vado) on indice
Installation Requirements:: R001 R006 R010
Model:: BC-AXB-153-CP BC-AXB-153-BN BC-AXB-253-CP BC-AXB-253-BN
Manufacturer:: Vado

Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

WRAS Approval Number: #2109047

Range of two-hole, single outlet (swivel) combination tap assemblies (chrome plated brass) incorporating quarter turn ceramic disc headworks with single lever or dome type operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2109047
Expiry date:: 30/09/2026
Marking:: AXCES by VADO on Body
Installation Requirements:: R001 R006 R010
Model:: AX-AST-153/CD-CP AX-AST-353-CP
Manufacturer:: Vado

Company Name
Vado
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
Somerset
Phone
Tel: 01934 744466

View All Listings by this Company

WRAS Approval Number: #2109908

Two hole, single outlet (swivel) combination tap assembly (various finishes) incorporating quarter turn ceramic disk headwork with cross-top operating members. The inlets incorporate approved single check cartridges however the complete assembly has not been tested to demonstrate it provides back flow prevention. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2109908
Expiry date:: 30/09/2026
Size:: ½” BSP (M)
Marking:: Bristan Colonial on indice
Installation Requirements:: R001 R006 R010
Model:: K BRSNK C (Chrome) K BRSNK BN (Brush Nickle) K BRSNK ABRZ (Antique Bronze)
Factor:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park, Pooley Hall Drive, Dordon, Tamworth. Staffordshire
Postcode
B78 1SG.
Country
United Kingdom
Phone
0844 7016274

View All Listings by this Company

WRAS Approval Number: #2111002

Range of floor mounted, two-hole, single outlet (swivel) combination tap assemblies (stainless steel and brass bodies various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 Bar Maximum operating temperature 70.0°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2111002
Expiry date:: 30/11/2026
Size:: ½” BSP (F)
Marking:: VOLA on Operating Member
Installation Requirements:: R001 R010 R040
Model:: VOLA FS2 - Stainless Steel body. Finishes regarding Stainless Steel are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA FS2 - Brass body. Finishes regarding Brass are available with different surface finishes. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

WRAS Approval Number: #2109376

Range of two hole, single outlet (swivel) combination tap assemblies with brass bodies (chrome plated). Incorporating non-rising spindle headworks with dome type operating members (model 922040) and ceramic disc headwork with single lever operating members (model 922075). The spout outlet incorporates a plastic flow straightener. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2109376
Expiry date:: 30/09/2026
Size:: ½” BSP (M)
Marking:: Francis Pegler on body
Installation Requirements:: R001 R006 R010
Model:: 922075 – Araya QT deck sink mixer 922040 – Araya modern deck sink mixer
Factor:: StH Westco Ltd

Company Name
StH Westco Ltd
Address
Unit C6 William Way Moss Industrial Estate St Helens Road Leigh
Postcode
WN7 3PT
Country
United Kingdom
Phone
01942 265230

View All Listings by this Company

WRAS Approval Number: #2201018

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2201018
Expiry date:: 31/01/2027
Size:: ½” BSP (M)
Marking:: Lota on front of body
Installation Requirements:: R001 R006 R010
Model:: 63479-00X Where X denotes finish and can be replaced with the following: 01 = Chrome, 04 = Brushed Nickel, 4408 = Brushed Brass, 6801 = Matt Black, 09 = Brushed Copper, 0402 = Brushed Nickel PVD, 2409 = Brushed Bronze.
Manufacturer:: Xiamen Lota International Co., Ltd.

Company Name
Xiamen Lota International Co., Ltd.
Address
No.61 Xingnan Road, Jimei District, Xiamen, 361022
Country
China
Phone
86-592-6665866

View All Listings by this Company

WRAS Approval Number: #2007917

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2007917
Expiry date:: 31/07/2025
Size:: ½” BSP (M)
Marking:: Swan logo on operating member
Installation Requirements:: R001 R006 R010
Model:: C58113 COMBINATION TAP ASSEMBLIES
Factor:: Wolseley UK

Company Name
Wolseley UK
Address
K2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926 705792

View All Listings by this Company

WRAS Approval Number: #2203017

Two-hole, single outlet swivel combination tap assembly in various finishes (see model) incorporating quarter turn ceramic disc headworks with a cross top operating members. The spout outlet incorporates a plastic aerator. Supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2203017
Expiry date:: 31/03/2027
Note:: No testing performed on pop-up waste.
Size:: Stainless steel braided TPSIV lined flexible hose assembly incorporating 3/8" BSP captive nut end connection
Marking:: AXOR on body
Installation Requirements:: R001 R006 R009 R010
Model:: 16 510 xxx AXOR Montreux 2 Where XXX denotes the surface finish (which is a non-water part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Manufacturer:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Vor Heubach 1, 77761 Schiltach Germany Hansgrohe Wasselonne S.A.S Parc d’Activites les Pins 67310 Wasselonne
Country
France

View All Listings by this Company

WRAS Approval Number: #2204328

Wall mounted, two-hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2204328
Expiry date:: 30/04/2027
Size:: ¾” x ½” offset unions
Marking:: Herz logo on operating member. Herz logo & manufacturers “letter” date code on body
Installation Requirements:: R001 R010 R040
Model:: Infinity I41
Manufacturer:: Herz d.o.o.

Company Name
Herz d.o.o.
Address
Grmaska Cesta 3 1275 Smartno pri Litiji
Country
Slovenia
Phone
+38 6 41 390 045

View All Listings by this Company

WRAS Approval Number: #2204070

Range of two-hole, single outlet (swivel) combination tap assemblies (various finishes, see models). Incorporating ceramic cartridge headworks and single operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2204070
Expiry date:: 30/04/2027
Size:: Stainless steel braided, PEX lined flexible hose assembly with ½” BSP (F) captive nut end connections
Marking:: VOLA on operating member
Installation Requirements:: R001 R006 R009 R010
Model:: VOLA BK5, VOLA BK5A & VOLA BK5B VOLA BK7, VOLA BK7A & VOLA BK7B Stainless Steel trim models. The surface finish is indicated by a suffix to the product name and denotes: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. Brass trim models. The surface finish is indicated by a suffix to the product name and denotes: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 59 = Brushed Natural Brass, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold. Difference in Models: VOLA BK5 & VOLA BK7: Mixer Complete with Adjustable bracket and water collection box VOLA BK5A & VOLA BK7A: Mixer with Bracket VOLA BK5B & BK7B: Mixer Alone
Manufacturer:: Vola A/S

Company Name
Vola A/S
Address
Lunavej 2, 8700 Horsens
Country
Denmark

View All Listings by this Company

WRAS Approval Number: #2204060

Range of two hole, single outlet (swivel) combination tap assemblies (brass body, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever, cross top or wheel operating members. The spout outlet incorporates a plastic aerator and the product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2204060
Expiry date:: 30/04/2027
Size:: ¾” BSP (M)
Marking:: ROXOR (Ultra Finishing Ltd. is a brand of Roxor) on body.
Installation Requirements:: R001 R006 R010
Model:: TEXZ53 - TEC Crosshead (Cross top) Bath Filler Small S Spout, TELZ53 - TEC Lever (Single lever) Bath Filler Small S Spout, TIWZ53 - TEC Industrial (Wheel type) Bath Filler Small S Spout. Models added October 2023: CLXZ53 - Aztec (Cross top) - Bath Filler Small S Spout. Where “Z” denotes the finish and can be replaced with the following: 3 - Chrome, 4 - Matt Black, 8 - Brushed Brass, 5 - Polished Gunmetal, 7 - Brushed Gunmetal.
Manufacturer:: Ultra Finishing Ltd.

Company Name
Ultra Finishing Ltd.
Address
Raikes Lane Industrial Estate, Bolton, Lancashire
Postcode
BL3 2NH
Phone
01282 436934

View All Listings by this Company

WRAS Approval Number: #2201078

Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2201078
Expiry date:: 31/01/2027
Size:: ½” BSP (M)
Marking:: Clearwater on front of body
Installation Requirements:: R001 R006 R010
Model:: ELB10CP, ELB10BN, ELB10BB, ELB10BZ & ELB10BC COMBINATION TAP ASSEMBLIES
Factor:: Clearwater Products

Company Name
Clearwater Products
Address
Unit 5603 Shannon Place, Tewkesbury Business Park, Tewkesbury
Postcode
GL20 8SL
Country
Gloucestershire
Phone
01684 299555

View All Listings by this Company

WRAS Approval Number: #2206317

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 1607023) or non-rising spindle headworks with dome type operating member (model 167021). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2206317
Expiry date:: 30/06/2027
Size:: 1/2” BSP (M)
Marking:: PPI on rear body.
Installation Requirements:: R001 R006 R010
Model:: 167021 & 167023
Manufacturer:: PPI Xiamen Industry Co Ltd

Company Name
PPI Xiamen Industry Co Ltd
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen 361022
Country
China

View All Listings by this Company

WRAS Approval Number: #2206369

Range of two hole, single outlet (swivel) combination tap assembly with brass bodies (chrome plated), incorporating quarter turn ceramic disc headworks and single lever operating members (model 740910) or non-rising spindle headworks with dome type operating member (model 546840). The spout outlet incorporates a plastic aerator or plastic flow straightener. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:: 0550 Combination Tap Assemblies
Section Subtitle:: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:: 2206369
Expiry date:: 30/06/2027
Size:: 1/2” BSP (M)
Marking:: TP on tap body.
Installation Requirements:: R001 R006 R010
Model:: 546840 Toulon Deck Sink Mixer 740910 Belfort Deck Sink Mixer
Factor:: Travis Perkins Plc

Company Name
Travis Perkins Plc
Address
Divisional Office Lakeside House Bedford
Postcode
NN4 7HD
Country
Northhampton
Phone
+44 (0) 1604 503457

View All Listings by this Company