Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2111701

Note:

For above and below ground use

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm

Marking:

Unidelta, pressure rating & size on the compression nut

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107101

Note:

Open outlet use only.

Size:

See models.

Marking:

Bestter & ‘WRAS Approved product’ on the body.

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

Model T8320: 1½” BSP (M), Model T8701-00: 2” BSP (M), Model T8701-01: 1½” BSP (M). Models added June 2023: Model T8701 1½” BSP (M)

Approval Holder:

Bestter(Xiamen) Technology lnc.

Company Name

Bestter(Xiamen) Technology lnc.

Address

No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Range of WC dual flush drop valves comprising of a plastic body, silicone seal and an internal overflow. The valve is operated via a push button or lever assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2107105

Note:

Open outlet use only.

Size:

2” BSP (M)

Marking:

Kohler and model number on valve body

Installation Requirements:

R001 R571

Expiry date:

31/07/2026

Model:

1190056 dual flush valve with any of the following actuators: 1278504-XX, 1367704-XX, 1215521-XX or 1199720-XX. 1409397 dual flush valve with 1409402-XX actuator. XX denotes the finish on the actuator, e.g. CP (chrome plating).

Approval Holder:

Kohler (Thailand) Public Company Limited

Company Name

Kohler (Thailand) Public Company Limited

Address

16TH FLOOR JASMINE CITY BUILDING 2 SOI SUKHUMVIT 23.

View All Listings by this Company

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of water meters with black epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

see model

Marking:

GWF, date of manufacture (YYYY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

Sonico EDGE DN200 – 350mm length. Sonico EDGE DN200 – 520mm length Sonico EGDE DN250 – 450mm length Sonico EDGE DN300 – 500mm length

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

FANSKI, WRAS and year of manufacture (YYYY) on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

DG80N-KSO-031-L: 15mm tube x ½” captive nut. DG80N-KSO-032-L: 15mm tube x 15mm tube.

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company