Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined flexible hose assemblies with DZR brass end connections. Some models incorporate spherical valves. Pushfit and compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1863 Tubes

Section Subtitle:

Elastomeric.

WRAS Approval Number:

260402002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

‘Justlink’ (brand of Yuhuan Jianglin Plumbing Hose & Parts Inc.), WRAS and year of manufacture (YYYY) on ferrule.

Installation Requirements:

R001

Expiry date:

30/04/2031

Model:

JL–A*B–XX–D–E–XXX. Where: A*B denotes connection size and type and can be replaced with any of the following options under each DN size (see below). XX denotes bore diameter of hose and can be replaced with any of the following: 06 = DN6, 08 = DN8, 10 = DN10, 13 = DN13, 19 = DN19. D denotes the outer braided material: SS = stainless steel wire SN = stainless steel wire plus black nylon wire N = Nylon wire E denotes the liner material: 0 = EPDM. XXX denotes the length of the hose (15cm to 200cm) and is replaced with a number, as examples: 015 = 15cm length, 100 = 100cm length, 200 = 200cm length. Size Codes: DN6 (denoted by 06) bore diameter available with the following end connections: 01 = F1/4, 02 = F1/4 elbow, 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 26 = F15, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring. DN8 (denoted by 08) bore diameter available with the following end connections: 03 = M1/4, 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 19 = M8*(12-110) with single O-ring, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 29 = 10mm compression, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 45 = M8*(12-110) with double O‐ring, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN10 (denoted by 10) bore diameter available with the following end connections: 04 = F3/8, 05 = F3/8 knurling nut, 06 = F3/8 insert without nut, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 20 = M10*(12-110) with single O-ring, 21 = M11*(12-110) with single O-ring, 22 = M12*(12-110) with single O-ring, 23 = M14*(12-110) with single O-ring, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 26 = F15, 27 = 15mm smooth tube, 30 = 12mm compression, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 35 = 10mm pushfit, 36 = 12mm pushfit, 37 = 15mm pushfit, 38 = 22mm pushfit, 39 = 10mm pushfit isolation valve, 40 = 12mm pushfit isolation valve, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 46 = M10*(12-110) with double O‐ring, 47 = M11*(12-110) with double O‐ring, 48 = M12*(12-110) with double O‐ring, 49 = M14*(12-110) with double O‐ring, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN13 (denoted by 13) bore diameter available with the following end connections: 04 = F3/8, 07 = F3/8 elbow, 08 = M3/8, 09 = F1/2, 10 = F1/2 wing nut, 11 = F1/2 elbow, 12 = M1/2, 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 24 = M15*(12-110) with single O-ring, 25 = M16*(12-110) with single O‐ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 31 = 15mm compression, 32 = 22mm compression, 33 = 15mm compression isolation valve, 34 = 22mm compression isolation valve, 37 = 15mm pushfit, 38 = 22mm pushfit, 41 = 15mm pushfit isolation valve, 42 = 22mm pushfit isolation valve, 43 = F1/2 plastic nut, 44 = F3/4 plastic nut, 50 = M15*(12-110) with double O‐ring, 51 = M16*(12-110) with double O‐ring. DN19 (denoted by 19) bore diameter available with the following end connections: 13 = F3/4, 14 = F3/4 elbow, 15 = M3/4, 16 = F1, 17 = F1 elbow, 18 = M1, 19 = M8*(12-110) with single O-ring, 27 = 15mm smooth tube, 28 = 22mm smooth tube, 32 = 22mm compression, 34 = 22mm compression isolation valve, 38 = 22mm pushfit, 42 = 22mm pushfit isolation valve.

Product Images

Approval Holder:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Manufacturer:

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Company Name

Yuhuan Jianglin Plumbing Hose & Parts Inc.

Address

2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600

Country

China

Phone

86-576-89901684

General Email

coo@cnjianglin.com

View All Listings by this Company

Range of concealed flow controls (brass body with various finishes) incorporating two, quarter turn ceramic disc headworks with single lever operating members controlling the flow to an external outlet (not supplied). Model BK2 is a flow control with adjustable bracket and collection box. Model BK2A is a flow control with bracket. Model BK2B is a flow control. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2000 Shower Valves

Section Subtitle:

Shower valve(s) with manual temperature control.

WRAS Approval Number:

260102015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Outlet hose must be installed where light is excluded. Water collection box discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

½” captive nut end connections.

Marking:

Vola on operating member

Installation Requirements:

R001 R007 R009 R010 R040

Expiry date:

31/01/2031

Model:

VOLA BK2, VOLA BK2A & VOLA BK2B VOLA BK2 – Mixer with Adjustable Bracket and water collection box VOLA BK2A – Mixer with Bracket VOLA BK2B – Mixer Alone Models with Brass and Stainless Steel operating members. Brass and Stainless Steel handles are available with different surface finishes. Suffix in the end of the product name indicate the surface finish and denotes: For Stainless Steel: 40=Brushed Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper. For Brass: 02=Grey, 04=Light Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Polished Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Silver, B61=Brushed Black, B64=Brushed Copper, B69=Brushed Silver, B70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

31/10/2030

Model:

RNDSCBV2.MB AQ150BAR2 300RSC TWBAR2.21 AQ150BAR2.MB TS150BAR2 126HP 126HP.MB AQSQBAR2 TSSQBAR2 408HP 300SSC AQSQBAR2.MB

Notes & Further Information

The “*” is for a different Overhead Shower, Shower Hose or Shower Handset, which represent the letters A to Z X XXX Denotes the following: First X: Different handle The second, third & fourth XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

260113002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” X ¾” BSP (M) Offset unions

Marking:

Aqualisa on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/01/2031

Model:

701936 701982

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

260302017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604

Size:

1/2" BSP (F) inlets and outlets

Marking:

Grohe Logo on faceplate

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2031

Model:

29.121.xxx (Thermostat for concealed installation with 3 valves) & 29.119.xxx (Thermostat for concealed installation with 2 valves Must be installed in combination with Grohe Rapido SmartBox 35.600 or 35.5604 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit DL0 – brushed warm sunset GN0 – brushed cool sunrise MG0 – satin graphite MS0 – satin steel GL0 – cool sunrise BE0 – polished nickel EN0 – brushed nickel

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

2210 Valves

Section Subtitle:

Pressure relief.

WRAS Approval Number:

260304702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For non-wholesome water use only.

Size:

See models

Marking:

Caleffi logo, Caleffi Hydronic Solutions on body, pressure rating on cap.

Installation Requirements:

R001 R200

Expiry date:

31/03/2031

Model:

B312016 BSC - 3 Bar - 20.79mm manifold connection x 23.05mm spigot, B312024 BSC - 3 Bar - 20.81mm manifold connection x 23.09mm OD, B312494 CST - 3 Bar - 19.84mm manifold connection x ½” BSP (M), B312093 VIS - 3 Bar - 19.83mm manifold connection x 21.55mm spigot, B312090 CST - 3 Bar - 20.83mm manifold connection x ½” BSP (M), B312002 CST - 2.5 Bar - 20.84mm manifold connection x ½” BSP (M), B312414 CST - 3 Bar - 20.88mm manifold connection x ½” BSP (M), B312028 CST - 2.5 Bar - 23.44mm manifold connection x 18.03mm spigot, B312026 CST - 2.5 Bar - 20.83mm manifold connection x 24.93mm spigot, B312017 CST - 4 Bar - 20.82mm manifold connection x ½” BSP (M), B312027 VLL - 2.5 Bar - 20.81mm manifold connection x 24.91mm spigot, B312046 CST - 4 Bar - 20.94mm manifold connection x 25.19mm spigot.

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.

Section:

2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm.

Marking:

Entity and product information on adhesive label on body

Installation Requirements:

R001 R120 R170

Expiry date:

30/11/2030

Model:

Entity Magnetic (15mm – Code 403519), Entity Magnetic (22mm – Code 403526,) Entity Electrolytic (15mm – Code 403540), Entity Electrolytic (22mm – Code 403557).

Approval Holder:

UK Plumbing Supplies Ltd

Company Name

UK Plumbing Supplies Ltd

Address

Quayside 2A Wilderspool Park Greenalls Avenue Cheshire

Postcode

WA4 6HL

View All Listings by this Company

'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5021 Bituminous Based Products

Section Subtitle:

Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.

WRAS Approval Number:

251155070

Expiry date:

30/11/2030

Approval Holder:

Shalimar Paints Limited

Company Name

Shalimar Paints Limited

Address

Nashik Mumbai NH Road, Gonde, Nashik, Maharashtra 422403

Country

India

View All Listings by this Company

'IF1947T'. Factory applied, red coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's Instructions for Use 'Doc. No. SPPR/L3/WI/PRD/28.' Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

251155071

Expiry date:

30/11/2030

Approval Holder:

Star Pipe Foundry (India) Pvt. Ltd.

Company Name

Star Pipe Foundry (India) Pvt. Ltd.

Address

Revenue Survey No. 50, Kotada Sangani, Near NH 8-B, 2 KM From Bhunava Toll Plaza, Tirth Agro Technology Hadamtala, Rajkot, Gujarat 360030

Country

India

View All Listings by this Company

'NextGen NP-F9500 PW'. Factory applied, blue coloured powder coating. Apply as per National Paints technical data sheet 'FBE/ REV01 09-07-2019'. Cure for 3 minutes@240°C. For use with water up to 85°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

250155085

Expiry date:

31/01/2030

Approval Holder:

Muscat Ductile Industry LLC

Company Name

Muscat Ductile Industry LLC

Address

PO Box: 2878 CPO PC:111, Sumail Industry Area, Al-Dakheliyeh

Country

Oman

View All Listings by this Company